VulnerabilityPublished 3 Aug 2026

CVE-2026-15430: Wellbia XIGNCODE3 · Improper Access Control

Affects Wellbia XIGNCODE3Source CVE Database V5

Not known to be exploited · CVSS 6.2 Medium.

Data as of 26 Oct 2026, 10:12 UTC

CVSS 3.1 base score

6.2Medium

How severe the flaw is on the 0–10 CVSS scale.

EPSS

0.1% chance of exploitation in 30 days – higher than 4% of CVEsExploit Prediction Scoring System: the likelihood attackers will use this flaw soon.

Exploitation: No evidence of active exploitation and no public proof of concept
Automatable: Attackers cannot reliably automate steps 1–4 of the kill chain
Technical impact: Limited control over the software or limited information exposure

CISA SSVC assessment, 2026-08-03.

CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N

Attack Vector: Local
Attack Complexity: Low
Privileges Required: None
User Interaction: None
Scope: Unchanged
Confidentiality: High
Integrity: None
Availability: None

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Local: The vulnerable component is not bound to the network stack and the attacker’s path is via read/write/execute capabilities. Either: the attacker exploits the vulnerability by accessing the target system locally (e.g., keyboard, console), or remotely (e.g., SSH); or the attacker relies on User Interaction by another person to perform actions required to exploit the vulnerability (e.g., tricking a legitimate user into opening a malicious document).
Attack Complexity: Low: Specialized access conditions or extenuating circumstances do not exist. An attacker can expect repeatable success against the vulnerable component.
Privileges Required: None: The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files to carry out an attack.
User Interaction: None: The vulnerable system can be exploited without any interaction from any user.
Scope: Unchanged: An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
Confidentiality: High: There is total loss of confidentiality, resulting in all resources within the impacted component being divulged to the attacker. Alternatively, access to only some restricted information is obtained, but the disclosed information presents a direct, serious impact.
Integrity: None: There is no loss of integrity within the impacted component.
Availability: None: There is no impact to availability within the impacted component.

Definitions: FIRST CVSS v3.1 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 3 Aug 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponised: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 26 Oct 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponised: Public exploit code exists in Metasploit or Exploit-DB, or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

Affected software

Product	Affected	Fixed in
WellbiaXIGNCODE3	Affected =2026.6.1.192	Fixed in–

Description

Improper access control in the IRP_MJ_WRITE command interface in Wellbia XIGNCODE3 xhunter2.sys, version 2026.6.1.192, allows a local, unprivileged attacker to achieve local privilege escalation to NT AUTHORITY\SYSTEM, extract credentials from PPL-protected lsass.exe, and terminate PPL-protected security processes.

CWE-284Improper Access Control (opens in a new tab)
Pillar weaknessCWE Top 25 (2025): #19OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product does not restrict or incorrectly restricts access to a resource from an unauthorized actor.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
Architecture and Design · Operation
Very carefully manage the setting, management, and handling of privileges. Explicitly manage trust zones in the software.
Architecture and Design · Separation of Privilege
Compartmentalize the system to have "safe" areas where trust boundaries can be unambiguously drawn. Do not allow sensitive data to go outside of the trust boundary and always be careful when interfacing with a compartment outside of the safe area.
OWASP Cheat Sheets
Docker Security (opens in a new tab)
Third Party Javascript Management (opens in a new tab)
Virtual Patching (opens in a new tab)
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V1.4.4 (opens in a new tab)
V1.4.5 (opens in a new tab)
V1.10.1 (opens in a new tab)
Attack patterns
Embedding Scripts within Scripts (opens in a new tab)
Modification of Windows Service Configuration (opens in a new tab)
Malicious Root Certificate (opens in a new tab)
Intent Spoof (opens in a new tab)
WebView Exposure (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-269Improper Privilege Management (opens in a new tab)
Class weaknessLikelihood of exploit: MediumOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The product does not properly assign, modify, track, or check privileges for an actor, creating an unintended sphere of control for that actor.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
Architecture and Design · Operation
Very carefully manage the setting, management, and handling of privileges. Explicitly manage trust zones in the software.
Architecture and Design · Separation of Privilege
Follow the principle of least privilege when assigning access rights to entities in a software system.
Architecture and Design · Separation of Privilege
Consider following the principle of separation of privilege. Require multiple conditions to be met before permitting access to a system resource.
OWASP Cheat Sheets
Docker Security (opens in a new tab)
Third Party Javascript Management (opens in a new tab)
Virtual Patching (opens in a new tab)
Secure Design Principles (opens in a new tab)
OWASP ASVS 4.0.3
V1.4.4 (opens in a new tab)
V1.4.5 (opens in a new tab)
V1.10.1 (opens in a new tab)
Attack patterns
Restful Privilege Elevation (opens in a new tab)
Privilege Abuse (opens in a new tab)
Privilege Escalation (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-732Incorrect Permission Assignment for Critical Resource (opens in a new tab)
Class weaknessLikelihood of exploit: HighOWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product specifies permissions for a security-critical resource in a way that allows that resource to be read or modified by unintended actors.
Implementation
When using a critical resource such as a configuration file, check to see if the resource has insecure permissions (such as being modifiable by any regular user), and generate an error or even exit the software if there is a possibility that the resource could have been modified by an unauthorized party.
Architecture and Design
Divide the software into anonymous, normal, privileged, and administrative areas. Reduce the attack surface by carefully defining distinct user groups, privileges, and/or roles. Map these against data, functionality, and the related resources. Then set the permissions accordingly.
Architecture and Design · Operation · Sandbox or Jail
Run the code in a "jail" or similar sandbox environment that enforces strict boundaries between the process and the operating system. This may effectively restrict which files can be accessed in a particular directory or which commands can be executed by the software.
OWASP Cheat Sheets
REST Assessment (opens in a new tab)
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V4.3.3 (opens in a new tab)
V8.3.8 (opens in a new tab)
V13.4.2 (opens in a new tab)
Attack patterns
Accessing Functionality Not Properly Constrained by ACLs (opens in a new tab)
Directory Indexing (opens in a new tab)
Using Malicious Files (opens in a new tab)
Exploiting Incorrectly Configured Access Control Security Levels (opens in a new tab)
Signing Malicious Code (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

References

blacksnufkin.github.io/posts/Hunting-the-Hunter-II/ (opens in a new tab)

Community reviews

Loading reviews…

Exploitation evidence

What to do

Affected software

Description

WeaknessesCWE-284, CWE-269, CWE-732

Technical details

References

Community reviews

Related threats