VulnerabilityPublished 30 Apr 2026Updated 15 Jul 2026

CVE-2026-40912: traefik · Use of Incorrectly-Resolved Name or Reference

Affects traefikSource GCVE Database

Compare

Not known to be exploited · CVSS 7.8 High · fixed in 3.7.0-rc.2 : patch traefik soon.

Data as of 11 Nov 2026, 22:20 UTC

CVSS 4.0 base score

7.8High

How severe the flaw is on the 0–10 CVSS scale.

Sources agree

CVSS scores by source
CNA (GitHub_M)	CVSS 4.0	7.8
ADP (redhat-SADP)	CVSS 3.1	8.6

Patch: Available – fixed in 3.7.0-rc.2, 3.6.14, 2.11.43

CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:N/SC:H/SI:L/SA:N

Attack Vector: Network
Attack Complexity: Low
Attack Requirements: None
Privileges Required: None
User Interaction: None
Vulnerable system confidentiality: None
Vulnerable system integrity: None
Vulnerable system availability: None
Subsequent system confidentiality: High
Subsequent system integrity: Low
Subsequent system availability: None

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable system is bound to the network stack and the set of possible attackers extends beyond the other options listed below, up to and including the entire Internet. Such a vulnerability is often termed “remotely exploitable” and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: Low: The attacker must take no measurable action to exploit the vulnerability. The attack requires no target-specific circumvention to exploit the vulnerability. An attacker can expect repeatable success against the vulnerable system.
Attack Requirements: None: The successful attack does not depend on the deployment and execution conditions of the vulnerable system. The attacker can expect to be able to reach the vulnerability and execute the exploit under all or most instances of the vulnerability.
Privileges Required: None: The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files of the vulnerable system to carry out an attack.
User Interaction: None: The vulnerable system can be exploited without interaction from any human user, other than the attacker.
Vulnerable system confidentiality: None: There is no loss of confidentiality within the Vulnerable System.
Vulnerable system integrity: None: There is no loss of integrity within the Vulnerable System.
Vulnerable system availability: None: There is no impact to availability within the Vulnerable System.
Subsequent system confidentiality: High: There is a total loss of confidentiality, resulting in all resources within the Subsequent System being divulged to the attacker. Alternatively, access to only some restricted information is obtained, but the disclosed information presents a direct, serious impact. For example, an attacker steals the administrator's password, or private encryption keys of a web server.
Subsequent system integrity: Low: Modification of data is possible, but the attacker does not have control over the consequence of a modification, or the amount of modification is limited. The data modification does not have a direct, serious impact to the Subsequent System.
Subsequent system availability: None: There is no impact to availability within the Subsequent System or all availability impact is constrained to the Vulnerable System.

Definitions: FIRST CVSS v4.0 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 30 Apr 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponized: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 11 Nov 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponized: A Metasploit exploit module or Exploit-DB entry exists (Metasploit scanner modules do not count), or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

Upgrade traefik to 3.7.0-rc.2, 3.6.14 or 2.11.43.

Affected software

Product	Affected	Fixed in
traefik traefik	Affected <2.11.43 >=3.0.0-beta1 <3.6.14 >=3.7.0-ea.1 <3.7.0-rc.2	Fixed in 2.11.43 3.6.14 3.7.0-rc.2

Description

Traefik is an HTTP reverse proxy and load balancer. Prior to versions 2.11.43, 3.6.14, and 3.7.0-rc.2, there is a high severity authentication bypass vulnerability in Traefik's StripPrefixRegex middleware when used in combination with ForwardAuth, BasicAuth, or DigestAuth. The middleware matches the regex against the decoded URL path but uses the resulting byte length to slice the percent-encoded raw path. When a dot (or multiple dots) appears in the prefix portion of the URL, the raw path after stripping becomes a dot-segment (e.g. /./admin/secret). ForwardAuth receives this dot-segment path in X-Forwarded-Uri, which does not match the protected path patterns and therefore allows the request through. The backend then normalizes the dot-segment to the real path per RFC 3986 and serves the protected content An unauthenticated attacker can exploit this against any backend that performs dot-segment normalization. This issue has been patched in versions 2.11.43, 3.6.14, and 3.7.0-rc.2.

CWE-706Use of Incorrectly-Resolved Name or Reference (opens in a new tab)
Class weaknessOWASP Top 10 A01:2021: Broken Access Control (opens in a new tab)
The product uses a name or reference to access a resource, but the name/reference resolves to a resource that is outside of the intended control sphere.
Attack patterns
Redirect Access to Libraries (opens in a new tab)
Create files with the same name as files protected with a higher classification (opens in a new tab)
Passing Local Filenames to Functions That Expect a URL (opens in a new tab)
DLL Side-Loading (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-22Improper Limitation of a Pathname to a Restricted Directory (Path Traversal) (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #6OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product uses external input to construct a pathname that is intended to identify a file or directory that is located underneath a restricted parent directory, but the product does not properly neutralize special elements within the pathname that can cause the pathname to resolve to a location that is outside of the restricted directory.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Architecture and Design
For any security checks that are performed on the client side, ensure that these checks are duplicated on the server side, in order to avoid CWE-602. Attackers can bypass the client-side checks by modifying values after the checks have been performed, or by changing the client to remove the client-side checks…
Implementation · Input Validation
Inputs should be decoded and canonicalized to the application's current internal representation before being validated (CWE-180). Make sure that the application does not decode the same input twice (CWE-174).
OWASP Cheat Sheets
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V12.3.1 (opens in a new tab)
Attack patterns
Path Traversal (opens in a new tab)
Using Slashes and URL Encoding Combined to Bypass Validation Logic (opens in a new tab)
Manipulating Web Input to File System Calls (opens in a new tab)
Using Escaped Slashes in Alternate Encoding (opens in a new tab)
Using Slashes in Alternate Encoding (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Affected software

Description

WeaknessesCWE-706, CWE-22

Technical details

References

Community reviews

Related threats