VulnerabilityPublished 11 Sep 2026Updated 14 Sep 2026

CVE-2026-50025: t-mart mousehole · Information Exposure

Affects t-mart mouseholeSource CVE Database V5

Not known to be exploited · CVSS 6.9 Medium : upgrade to 0.4.0 when convenient.

Data as of 27 Oct 2026, 05:11 UTC

CVSS 4.0 base score

6.9Medium

How severe the flaw is on the 0–10 CVSS scale.

EPSS: 0.2% chance of exploitation in 30 days – higher than 17% of CVEsExploit Prediction Scoring System: the likelihood attackers will use this flaw soon.
Patch: Available – fixed in 0.4.0

CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:L/VA:N/SC:N/SI:N/SA:N

Attack Vector: Network
Attack Complexity: Low
Attack Requirements: None
Privileges Required: None
User Interaction: None
Vulnerable system confidentiality: None
Vulnerable system integrity: Low
Vulnerable system availability: None
Subsequent system confidentiality: None
Subsequent system integrity: None
Subsequent system availability: None

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable system is bound to the network stack and the set of possible attackers extends beyond the other options listed below, up to and including the entire Internet. Such a vulnerability is often termed “remotely exploitable” and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: Low: The attacker must take no measurable action to exploit the vulnerability. The attack requires no target-specific circumvention to exploit the vulnerability. An attacker can expect repeatable success against the vulnerable system.
Attack Requirements: None: The successful attack does not depend on the deployment and execution conditions of the vulnerable system. The attacker can expect to be able to reach the vulnerability and execute the exploit under all or most instances of the vulnerability.
Privileges Required: None: The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files of the vulnerable system to carry out an attack.
User Interaction: None: The vulnerable system can be exploited without interaction from any human user, other than the attacker.
Vulnerable system confidentiality: None: There is no loss of confidentiality within the Vulnerable System.
Vulnerable system integrity: Low: Modification of data is possible, but the attacker does not have control over the consequence of a modification, or the amount of modification is limited. The data modification does not have a direct, serious impact to the Vulnerable System.
Vulnerable system availability: None: There is no impact to availability within the Vulnerable System.
Subsequent system confidentiality: None: There is no loss of confidentiality within the Subsequent System or all confidentiality impact is constrained to the Vulnerable System.
Subsequent system integrity: None: There is no loss of integrity within the Subsequent System or all integrity impact is constrained to the Vulnerable System.
Subsequent system availability: None: There is no impact to availability within the Subsequent System or all availability impact is constrained to the Vulnerable System.

Definitions: FIRST CVSS v4.0 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 11 Sep 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponised: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 26 Oct 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponised: Public exploit code exists in Metasploit or Exploit-DB, or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

Upgrade mousehole and t-mart/mousehole to 0.4.0.

Affected software

Product	Affected	Fixed in
t-martmousehole	Affected <0.4.0	Fixed in 0.4.0
GitHubt-mart/mousehole`pkg:github/t-mart/mousehole`Other threats	Affected <0.4.0	Fixed in 0.4.0

Check your own hosts for these packages with threat-finder (opens in a new tab), our free open-source scanner.

AI-suggested

Upgrade Mousehole to version 0.4.0 or later, which patches this vulnerability by implementing proper authentication and provenance checks on the HTTP/WebSocket management boundary. Until upgraded, restrict network access to the Mousehole management port (default 5010) to trusted hosts only, avoiding broad exposure on LAN or VPN interfaces. Review Docker deployment configurations to avoid publishing the management port broadly.

Description

Mousehole is a background service to update a seedbox IP for MAM and web app to manage it. Prior to version 0.4.05, Mousehole's HTTP/WebSocket management boundary is reachable without application-layer authentication or browser/LAN provenance checks. The service stores a MyAnonamouse (MAM) session cookie in state and reuses the same cookie-bearing serialization for persisted state, public API responses, and WebSocket state updates. Any client that can reach the published Mousehole port can read cookie-bearing state, connect to WebSocket state updates, replace the stored cookie, or force MAM update side effects. The deployment examples publish port 5010 broadly with Docker's `5010:5010` syntax, which can make the issue reachable on mixed-trust LAN/VPN interfaces. Version 0.4.0 patches the issue.

Impact

An attacker with network access to the exposed Mousehole port can obtain sensitive session cookies and state information without authentication, enabling unauthorized access to MyAnonamouse session data. They can also manipulate session cookies and force update side effects, potentially disrupting service or compromising user sessions. This exposure of sensitive information to unauthorized actors can lead to privacy violations and unauthorized control over session state.

CWE-200Exposure of Sensitive Information to an Unauthorized Actor (opens in a new tab)
Class weaknessLikelihood of exploit: HighCWE Top 25 (2025): #20OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product exposes sensitive information to an actor that is not explicitly authorized to have access to that information.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
Architecture and Design · Separation of Privilege
Compartmentalize the system to have "safe" areas where trust boundaries can be unambiguously drawn. Do not allow sensitive data to go outside of the trust boundary and always be careful when interfacing with a compartment outside of the safe area.
OWASP Cheat Sheets
Error Handling (opens in a new tab)
Logging (opens in a new tab)
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V8.3.4 (opens in a new tab)
V14.3.3 (opens in a new tab)
V7.3.3 (opens in a new tab)
Attack patterns
Subverting Environment Variable Values (opens in a new tab)
ICMP Echo Request Ping (opens in a new tab)
TCP SYN Scan (opens in a new tab)
Enumerate Mail Exchange (MX) Records (opens in a new tab)
DNS Zone Transfers (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-306Missing Authentication for Critical Function (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #21OWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
The product does not perform any authentication for functionality that requires a provable user identity or consumes a significant amount of resources.
Architecture and Design
Divide the software into anonymous, normal, privileged, and administrative areas. Identify which of these areas require a proven user identity, and use a centralized authentication capability.
Architecture and Design
For any security checks that are performed on the client side, ensure that these checks are duplicated on the server side, in order to avoid CWE-602. Attackers can bypass the client-side checks by modifying values after the checks have been performed, or by changing the client to remove the client-side checks…
Architecture and Design
Where possible, avoid implementing custom, "grow-your-own" authentication routines and consider using authentication capabilities as provided by the surrounding framework, operating system, or environment.
OWASP Cheat Sheets
OWASP Authentication (opens in a new tab)
OWASP ASVS 4.0.3
V1.2.3 (opens in a new tab)
V1.2.2 (opens in a new tab)
V1.2.4 (opens in a new tab)
Attack patterns
Choosing Message Identifier (opens in a new tab)
Force the System to Reset Values (opens in a new tab)
Using Unpublished Interfaces or Functionality (opens in a new tab)
Cross Site Request Forgery (opens in a new tab)
Communication Channel Manipulation (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-346Origin Validation Error (opens in a new tab)
Class weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
The product does not properly verify that the source of data or communication is valid.
OWASP Cheat Sheets
OWASP Authentication (opens in a new tab)
OWASP ASVS 4.0.3
V14.5.2 (opens in a new tab)
V14.5.3 (opens in a new tab)
V1.4.4 (opens in a new tab)
Attack patterns
JSON Hijacking (aka JavaScript Hijacking) (opens in a new tab)
Cache Poisoning (opens in a new tab)
DNS Cache Poisoning (opens in a new tab)
Exploit Script-Based APIs (opens in a new tab)
Application API Message Manipulation via Man-in-the-Middle (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-352Cross-Site Request Forgery (CSRF) (opens in a new tab)
Compound weaknessLikelihood of exploit: MediumCWE Top 25 (2025): #3OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The web application does not, or cannot, sufficiently verify whether a request was intentionally provided by the user who sent the request, which could have originated from an unauthorized actor.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Implementation
Ensure that the application is free of cross-site scripting issues (CWE-79), because most CSRF defenses can be bypassed using attacker-controlled script.
Architecture and Design
Generate a unique nonce for each form, place the nonce into the form, and verify the nonce upon receipt of the form. Be sure that the nonce is not predictable (CWE-330).
OWASP Cheat Sheets
REST Assessment (opens in a new tab)
REST Security (opens in a new tab)
Cross-Site Request Forgery Prevention (opens in a new tab)
Authorization Testing Automation (opens in a new tab)
Insecure Direct Object Reference Prevention (opens in a new tab)
OWASP ASVS 4.0.3
V13.2.3 (opens in a new tab)
V4.2.2 (opens in a new tab)
V13.3.2 (opens in a new tab)
Attack patterns
JSON Hijacking (aka JavaScript Hijacking) (opens in a new tab)
Cross-Domain Search Timing (opens in a new tab)
Cross Site Identification (opens in a new tab)
Cross Site Request Forgery (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-862Missing Authorization (opens in a new tab)
Class weaknessLikelihood of exploit: HighCWE Top 25 (2025): #4OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product does not perform an authorization check when an actor attempts to access a resource or perform an action.
Architecture and Design
Divide the product into anonymous, normal, privileged, and administrative areas. Reduce the attack surface by carefully mapping roles with data and functionality. Use role-based access control (RBAC) to enforce the roles at the appropriate boundaries.
Architecture and Design
Ensure that access control checks are performed related to the business logic. These checks may be different than the access control checks that are applied to more generic resources such as files, connections, processes, memory, and database records.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
OWASP Cheat Sheets
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V8.3.8 (opens in a new tab)
V13.4.2 (opens in a new tab)
V7.2.2 (opens in a new tab)
Attack patterns
Exploitation of Thunderbolt Protection Flaws (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Affected software

Description

AI analysisMachine-generated, updated 19 Sep 2026, 00:53 UTC

WeaknessesCWE-200, CWE-306, CWE-346 +2

Technical details

References

Community reviews

Related threats