VulnerabilityPublished 17 Sep 2026

CVE-2026-54501: webrecorder browsertrix · Improper Input Validation

Affects webrecorder browsertrixSource CVE Database V5

Compare

Not known to be exploited · CVSS 9.4 Critical : upgrade to 1.22.8 as a priority.

Data as of 1 Nov 2026, 22:58 UTC

CVSS 4.0 base score

9.4Critical

How severe the flaw is on the 0–10 CVSS scale.

EPSS: 1.2% chance of exploitation in 30 days – higher than 68% of CVEsExploit Prediction Scoring System: the likelihood attackers will use this flaw soon.
Patch: Available – fixed in 1.22.8

CVSS:4.0/AV:N/AC:L/AT:N/PR:L/UI:N/VC:H/VI:H/VA:H/SC:H/SI:H/SA:H

Attack Vector: Network
Attack Complexity: Low
Attack Requirements: None
Privileges Required: Low
User Interaction: None
Vulnerable system confidentiality: High
Vulnerable system integrity: High
Vulnerable system availability: High
Subsequent system confidentiality: High
Subsequent system integrity: High
Subsequent system availability: High

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable system is bound to the network stack and the set of possible attackers extends beyond the other options listed below, up to and including the entire Internet. Such a vulnerability is often termed “remotely exploitable” and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: Low: The attacker must take no measurable action to exploit the vulnerability. The attack requires no target-specific circumvention to exploit the vulnerability. An attacker can expect repeatable success against the vulnerable system.
Attack Requirements: None: The successful attack does not depend on the deployment and execution conditions of the vulnerable system. The attacker can expect to be able to reach the vulnerability and execute the exploit under all or most instances of the vulnerability.
Privileges Required: Low: The attacker requires privileges that provide basic capabilities that are typically limited to settings and resources owned by a single low-privileged user. Alternatively, an attacker with Low privileges has the ability to access only non-sensitive resources.
User Interaction: None: The vulnerable system can be exploited without interaction from any human user, other than the attacker.
Vulnerable system confidentiality: High: There is a total loss of confidentiality, resulting in all information within the Vulnerable System being divulged to the attacker. Alternatively, access to only some restricted information is obtained, but the disclosed information presents a direct, serious impact. For example, an attacker steals the administrator's password, or private encryption keys of a web server.
Vulnerable system integrity: High: There is a total loss of integrity, or a complete loss of protection. For example, the attacker is able to modify any/all files protected by the vulnerable system. Alternatively, only some files can be modified, but malicious modification would present a direct, serious consequence to the vulnerable system.
Vulnerable system availability: High: There is a total loss of availability, resulting in the attacker being able to fully deny access to resources in the Vulnerable System; this loss is either sustained (while the attacker continues to deliver the attack) or persistent (the condition persists even after the attack has completed). Alternatively, the attacker has the ability to deny some availability, but the loss of availability presents a direct, serious consequence to the Vulnerable System (e.g., the attacker cannot disrupt existing connections, but can prevent new connections; the attacker can repeatedly exploit a vulnerability that, in each instance of a successful attack, leaks a only small amount of memory, but after repeated exploitation causes a service to become completely unavailable).
Subsequent system confidentiality: High: There is a total loss of confidentiality, resulting in all resources within the Subsequent System being divulged to the attacker. Alternatively, access to only some restricted information is obtained, but the disclosed information presents a direct, serious impact. For example, an attacker steals the administrator's password, or private encryption keys of a web server.
Subsequent system integrity: High: There is a total loss of integrity, or a complete loss of protection. For example, the attacker is able to modify any/all files protected by the Subsequent System. Alternatively, only some files can be modified, but malicious modification would present a direct, serious consequence to the Subsequent System.
Subsequent system availability: High: There is a total loss of availability, resulting in the attacker being able to fully deny access to resources in the Subsequent System; this loss is either sustained (while the attacker continues to deliver the attack) or persistent (the condition persists even after the attack has completed). Alternatively, the attacker has the ability to deny some availability, but the loss of availability presents a direct, serious consequence to the Subsequent System (e.g., the attacker cannot disrupt existing connections, but can prevent new connections; the attacker can repeatedly exploit a vulnerability that, in each instance of a successful attack, leaks a only small amount of memory, but after repeated exploitation causes a service to become completely unavailable).

Definitions: FIRST CVSS v4.0 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 17 Sep 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponized: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 1 Nov 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponized: A Metasploit exploit module or Exploit-DB entry exists (Metasploit scanner modules do not count), or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

Upgrade browsertrix and webrecorder/browsertrix to 1.22.8.

Affected software

Product	Affected	Fixed in
webrecorderbrowsertrix	Affected >=1.15.0 <1.22.8	Fixed in 1.22.8
GitHubwebrecorder/browsertrix`pkg:github/webrecorder/browsertrix`Other threats	Affected >=1.15.0 <1.22.8	Fixed in 1.22.8

Check your own hosts for these packages with threat-finder (opens in a new tab), our free open-source scanner.

AI-suggested

Upgrade Browsertrix to version 1.22.8 or later, where this vulnerability is fixed. There is no indication that any temporary or alternative mitigations are available. Restrict crawler and administrator permissions to trusted users to reduce exposure until the upgrade is applied.

Description

Browsertrix is a high-fidelity, browser-based crawling service for web archiving that can be self-hosted or used through Webrecorder's hosted instance. From 1.15.0 until 1.22.8, Browsertrix improperly sanitizes Git URLs specified as Custom Behaviors, allowing command injection through /api/orgs/*/crawlconfigs/validate/custom-behavior. A user with crawler or administrator permission on the specific instance can supply a crafted Git URL that executes arbitrary operating-system commands in the backend pod. Open registration or hosted free-trial access can make the required role broadly obtainable. Successful exploitation can expose, modify, or delete application database records, archived items, browser profiles, storage data, proxy credentials, and other configured service data. This issue is fixed in version 1.22.8.

Impact

Successful exploitation allows attackers with limited privileges (crawler or administrator) to execute arbitrary commands on the backend system hosting Browsertrix. This can lead to unauthorized access, modification, or deletion of critical application data including database records, archived content, browser profiles, storage, and credentials. The vulnerability poses a critical risk to confidentiality, integrity, and availability of the service.

Summary

CVE-2026-54501 is an improper input validation vulnerability (CWE-20) in Browsertrix, a browser-based crawling service for web archiving. Between versions 1.15.0 and 1.22.7 inclusive, the application fails to properly sanitize Git URLs used as Custom Behaviors, enabling command injection through a specific API endpoint. Users with crawler or administrator roles can supply crafted Git URLs that execute arbitrary operating system commands on the backend pod. This can compromise application database records, archived items, browser profiles, storage data, proxy credentials, and other service data. The vulnerability is resolved in version 1.22.8.

CWE-20Improper Input Validation (opens in a new tab)
Class weaknessLikelihood of exploit: HighCWE Top 25 (2025): #18OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product receives input or data, but it does not validate or incorrectly validates that the input has the properties that are required to process the data safely and correctly.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
Architecture and Design · Attack Surface Reduction
Consider using language-theoretic security (LangSec) techniques that characterize inputs using a formal language and build "recognizers" for that language. This effectively requires parsing to be a distinct layer that effectively enforces a boundary between raw input and internal data representations, instead of…
Architecture and Design · Libraries or Frameworks
Use an input validation framework such as Struts or the OWASP ESAPI Validation API. Note that using a framework does not automatically address all input validation problems; be mindful of weaknesses that could arise from misusing the framework itself (CWE-1173).
Architecture and Design · Implementation · Attack Surface Reduction
Understand all the potential areas where untrusted inputs can enter the product, including but not limited to: parameters or arguments, cookies, anything read from the network, environment variables, reverse DNS lookups, query results, request headers, URL components, e-mail, files, filenames, databases, and any…
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
Injection Prevention (opens in a new tab)
SQL Injection Prevention (opens in a new tab)
Injection Prevention in Java (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
Attack patterns
Buffer Overflow via Environment Variables (opens in a new tab)
Server Side Include (SSI) Injection (opens in a new tab)
Cross Zone Scripting (opens in a new tab)
Command Line Execution through SQL Injection (opens in a new tab)
Object Relational Mapping Injection (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-77Improper Neutralization of Special Elements used in a Command (Command Injection) (opens in a new tab)
Class weaknessLikelihood of exploit: HighCWE Top 25 (2025): #23OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product constructs all or part of a command using externally-influenced input from an upstream component, but it does not neutralize or incorrectly neutralizes special elements that could modify the intended command when it is sent to a downstream component.
Architecture and Design
If at all possible, use library calls rather than external processes to recreate the desired functionality.
Implementation
If possible, ensure that all external commands called from the program are statically created.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
OWASP Cheat Sheets
Abuse Case (opens in a new tab)
Deserialization (opens in a new tab)
Injection Prevention (opens in a new tab)
SQL Injection Prevention (opens in a new tab)
Injection Prevention in Java (opens in a new tab)
OWASP ASVS 4.0.3
V1.5.1 (opens in a new tab)
Attack patterns
LDAP Injection (opens in a new tab)
Command Delimiters (opens in a new tab)
IMAP/SMTP Command Injection (opens in a new tab)
Manipulating Writeable Terminal Devices (opens in a new tab)
Exploiting Multiple Input Interpretation Layers (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-78Improper Neutralization of Special Elements used in an OS Command (OS Command Injection) (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #9OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product constructs all or part of an OS command using externally-influenced input from an upstream component, but it does not neutralize or incorrectly neutralizes special elements that could modify the intended OS command before it is sent to a downstream component.
Architecture and Design
If at all possible, use library calls rather than external processes to recreate the desired functionality.
Architecture and Design · Operation · Sandbox or Jail
Run the code in a "jail" or similar sandbox environment that enforces strict boundaries between the process and the operating system. This may effectively restrict which files can be accessed in a particular directory or which commands can be executed by the software.
Architecture and Design · Attack Surface Reduction
For any data that will be used to generate a command to be executed, keep as much of that data out of external control as possible. For example, in web applications, this may require storing the data locally in the session's state instead of sending it out to the client in a hidden form field.
OWASP Cheat Sheets
Injection Prevention (opens in a new tab)
Injection Prevention in Java (opens in a new tab)
OS Command Injection Defense (opens in a new tab)
Abuse Case (opens in a new tab)
Deserialization (opens in a new tab)
OWASP ASVS 4.0.3
V12.3.5 (opens in a new tab)
V5.3.8 (opens in a new tab)
V1.5.1 (opens in a new tab)
Attack patterns
Command Line Execution through SQL Injection (opens in a new tab)
Command Delimiters (opens in a new tab)
Exploiting Multiple Input Interpretation Layers (opens in a new tab)
Argument Injection (opens in a new tab)
OS Command Injection (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-88Improper Neutralization of Argument Delimiters in a Command (Argument Injection) (opens in a new tab)
Base weaknessOWASP Top 10 A05:2025: Injection (opens in a new tab)
The product constructs a string for a command to be executed by a separate component in another control sphere, but it does not properly delimit the intended arguments, options, or switches within that command string.
Implementation · Parameterization
Where possible, avoid building a single string that contains the command and its arguments. Some languages or frameworks have functions that support specifying independent arguments, e.g. as an array, which is used to automatically perform the appropriate quoting or escaping while building the command.
Architecture and Design · Input Validation
Understand all the potential areas where untrusted inputs can enter your product: parameters or arguments, cookies, anything read from the network, environment variables, request headers as well as content, URL components, e-mail, files, databases, and any external systems that provide data to the application.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
OWASP Cheat Sheets
Abuse Case (opens in a new tab)
Deserialization (opens in a new tab)
Injection Prevention (opens in a new tab)
SQL Injection Prevention (opens in a new tab)
Injection Prevention in Java (opens in a new tab)
OWASP ASVS 4.0.3
V1.5.1 (opens in a new tab)
Attack patterns
Flash Parameter Injection (opens in a new tab)
Using Meta-characters in E-mail Headers to Inject Malicious Payloads (opens in a new tab)
HTTP Parameter Pollution (HPP) (opens in a new tab)
OS Command Injection (opens in a new tab)
Parameter Injection (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-250Execution with Unnecessary Privileges (opens in a new tab)
Base weaknessLikelihood of exploit: Medium
The product performs an operation at a privilege level that is higher than the minimum level required, which creates new weaknesses or amplifies the consequences of other weaknesses.
Architecture and Design · Operation · Environment Hardening
Run your code using the lowest privileges that are required to accomplish the necessary tasks. If possible, create isolated accounts with limited privileges that are only used for a single task. That way, a successful attack will not immediately give the attacker access to the rest of the software or its environment.
Architecture and Design · Separation of Privilege
Identify the functionality that requires additional privileges, such as access to privileged operating system resources. Wrap and centralize this functionality if possible, and isolate the privileged code as much as possible from other code.
Architecture and Design · Attack Surface Reduction
Identify the functionality that requires additional privileges, such as access to privileged operating system resources. Wrap and centralize this functionality if possible, and isolate the privileged code as much as possible from other code.
OWASP Cheat Sheets
Docker Security (opens in a new tab)
Vulnerable Dependency Management (opens in a new tab)
OWASP ASVS 4.0.3
V1.14.5 (opens in a new tab)
V1.2.1 (opens in a new tab)
V14.2.6 (opens in a new tab)
Attack patterns
Cross Zone Scripting (opens in a new tab)
Expanding Control over the Operating System from the Database (opens in a new tab)
Target Programs with Elevated Privileges (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Affected software

Description

AI analysisMachine-generated, updated 17 Sep 2026, 21:01 UTC

WeaknessesCWE-20, CWE-77, CWE-78 +2

Technical details

References

Community reviews

Related threats