CVE-2026-9489: Acer NitrorSense V3 · Path Traversal
Affects Acer NitrorSense V3Source CVE Database V5
Not known to be exploited · CVSS 8.5 High.
Data as of 30 Oct 2026, 06:59 UTC
- EPSS
- 0.1% chance of exploitation in 30 days – higher than 1% of CVEsExploit Prediction Scoring System: the likelihood attackers will use this flaw soon.
CVSS:4.0/AV:L/AC:L/AT:N/PR:L/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N- Attack Vector
- Local
- Attack Complexity
- Low
- Attack Requirements
- None
- Privileges Required
- Low
- User Interaction
- None
- Vulnerable system confidentiality
- High
- Vulnerable system integrity
- High
- Vulnerable system availability
- High
- Subsequent system confidentiality
- None
- Subsequent system integrity
- None
- Subsequent system availability
- None
Bold values are the worst case: easiest to exploit or largest impact.
- Attack Vector: Local
- The vulnerable system is not bound to the network stack and the attacker’s path is via read/write/execute capabilities. Either the attacker exploits the vulnerability by accessing the target system locally (e.g., keyboard, console), or through terminal emulation (e.g., SSH); or the attacker relies on User Interaction by another person to perform actions required to exploit the vulnerability (e.g., using social engineering techniques to trick a legitimate user into opening a malicious document).
- Attack Complexity: Low
- The attacker must take no measurable action to exploit the vulnerability. The attack requires no target-specific circumvention to exploit the vulnerability. An attacker can expect repeatable success against the vulnerable system.
- Attack Requirements: None
- The successful attack does not depend on the deployment and execution conditions of the vulnerable system. The attacker can expect to be able to reach the vulnerability and execute the exploit under all or most instances of the vulnerability.
- Privileges Required: Low
- The attacker requires privileges that provide basic capabilities that are typically limited to settings and resources owned by a single low-privileged user. Alternatively, an attacker with Low privileges has the ability to access only non-sensitive resources.
- User Interaction: None
- The vulnerable system can be exploited without interaction from any human user, other than the attacker.
- Vulnerable system confidentiality: High
- There is a total loss of confidentiality, resulting in all information within the Vulnerable System being divulged to the attacker. Alternatively, access to only some restricted information is obtained, but the disclosed information presents a direct, serious impact. For example, an attacker steals the administrator's password, or private encryption keys of a web server.
- Vulnerable system integrity: High
- There is a total loss of integrity, or a complete loss of protection. For example, the attacker is able to modify any/all files protected by the vulnerable system. Alternatively, only some files can be modified, but malicious modification would present a direct, serious consequence to the vulnerable system.
- Vulnerable system availability: High
- There is a total loss of availability, resulting in the attacker being able to fully deny access to resources in the Vulnerable System; this loss is either sustained (while the attacker continues to deliver the attack) or persistent (the condition persists even after the attack has completed). Alternatively, the attacker has the ability to deny some availability, but the loss of availability presents a direct, serious consequence to the Vulnerable System (e.g., the attacker cannot disrupt existing connections, but can prevent new connections; the attacker can repeatedly exploit a vulnerability that, in each instance of a successful attack, leaks a only small amount of memory, but after repeated exploitation causes a service to become completely unavailable).
- Subsequent system confidentiality: None
- There is no loss of confidentiality within the Subsequent System or all confidentiality impact is constrained to the Vulnerable System.
- Subsequent system integrity: None
- There is no loss of integrity within the Subsequent System or all integrity impact is constrained to the Vulnerable System.
- Subsequent system availability: None
- There is no impact to availability within the Subsequent System or all availability impact is constrained to the Vulnerable System.
Definitions: FIRST CVSS v4.0 specification.
Exploitation evidence
Disclosed: evidence found.
CVE published 25 May 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponized: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors
A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 29 Oct 2026.
- Disclosed
- The CVE record is public on cve.org. Its publication is t = 0.
- Detectable
- A public nuclei template can find exposed instances, for defenders and attackers alike.
- Weaponized
- A Metasploit exploit module or Exploit-DB entry exists (Metasploit scanner modules do not count), or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
- Exploited in the wild
- CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
- Observed by OffSeq Mirage
- OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.
Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.
What to do
Affected software
| Product | Affected | Fixed in |
|---|---|---|
| AcerNitrorSense V3 | Affected
| Fixed in– |
AI-suggested
Until a patch is available, restrict local user access to trusted individuals only and monitor for suspicious activity related to NitroSense Named Pipe usage.
Description
Acer NitroSense V3 versions before 3.01.3052 contain a local privilege escalation vulnerability due to improper configuration of a Windows Named Pipe. This flaw allows any authenticated local user to execute arbitrary code and delete files with SYSTEM privileges by exploiting a custom protocol exposed by the Named Pipe. The vulnerability is classified as a path traversal and improper access control issue, leading to high-severity impact on affected systems.
Impact
Exploitation of this vulnerability enables an authenticated local attacker to gain SYSTEM-level privileges on the affected machine, allowing arbitrary code execution and deletion of files with elevated rights. This can lead to full system compromise, unauthorized modification or destruction of data, and potential persistence of malicious code with the highest privilege level.
- CWE-22Improper Limitation of a Pathname to a Restricted Directory (Path Traversal) (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #6OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product uses external input to construct a pathname that is intended to identify a file or directory that is located underneath a restricted parent directory, but the product does not properly neutralize special elements within the pathname that can cause the pathname to resolve to a location that is outside of the restricted directory.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Architecture and Design
For any security checks that are performed on the client side, ensure that these checks are duplicated on the server side, in order to avoid CWE-602. Attackers can bypass the client-side checks by modifying values after the checks have been performed, or by changing the client to remove the client-side checks…
Implementation · Input Validation
Inputs should be decoded and canonicalized to the application's current internal representation before being validated (CWE-180). Make sure that the application does not decode the same input twice (CWE-174).
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
- Attack patterns
- Path Traversal (opens in a new tab)
- Using Slashes and URL Encoding Combined to Bypass Validation Logic (opens in a new tab)
- Manipulating Web Input to File System Calls (opens in a new tab)
- Using Escaped Slashes in Alternate Encoding (opens in a new tab)
- Using Slashes in Alternate Encoding (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-269Improper Privilege Management (opens in a new tab)
Class weaknessLikelihood of exploit: MediumOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The product does not properly assign, modify, track, or check privileges for an actor, creating an unintended sphere of control for that actor.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
Architecture and Design · Operation
Very carefully manage the setting, management, and handling of privileges. Explicitly manage trust zones in the software.
Architecture and Design · Separation of Privilege
Follow the principle of least privilege when assigning access rights to entities in a software system.
Architecture and Design · Separation of Privilege
Consider following the principle of separation of privilege. Require multiple conditions to be met before permitting access to a system resource.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-284Improper Access Control (opens in a new tab)
Pillar weaknessCWE Top 25 (2025): #19OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product does not restrict or incorrectly restricts access to a resource from an unauthorized actor.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
Architecture and Design · Operation
Very carefully manage the setting, management, and handling of privileges. Explicitly manage trust zones in the software.
Architecture and Design · Separation of Privilege
Compartmentalize the system to have "safe" areas where trust boundaries can be unambiguously drawn. Do not allow sensitive data to go outside of the trust boundary and always be careful when interfacing with a compartment outside of the safe area.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-732Incorrect Permission Assignment for Critical Resource (opens in a new tab)
Class weaknessLikelihood of exploit: HighOWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product specifies permissions for a security-critical resource in a way that allows that resource to be read or modified by unintended actors.
Implementation
When using a critical resource such as a configuration file, check to see if the resource has insecure permissions (such as being modifiable by any regular user), and generate an error or even exit the software if there is a possibility that the resource could have been modified by an unauthorized party.
Architecture and Design
Divide the software into anonymous, normal, privileged, and administrative areas. Reduce the attack surface by carefully defining distinct user groups, privileges, and/or roles. Map these against data, functionality, and the related resources. Then set the permissions accordingly.
Architecture and Design · Operation · Sandbox or Jail
Run the code in a "jail" or similar sandbox environment that enforces strict boundaries between the process and the operating system. This may effectively restrict which files can be accessed in a particular directory or which commands can be executed by the software.
- OWASP Cheat Sheets
- Attack patterns
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- Assigned by (CNA)
- Acer Inc. (opens in a new tab) · Vendor · Taiwan
- Reserved
- CVSS version
- 4.0
References
Community reviews
Related threats
- CVE-2026-9789: Acer NitrorSense V3 · Path TraversalHighVulnerability
- CVE-2026-8069: Acer PredatorSense V3 · Path TraversalHighVulnerability
- CVE-2026-50610: Acer System Monitoring · Improper Access ControlHighVulnerability
- CVE-2026-50609: Acer System Monitoring · Improper Access ControlHighVulnerability
- CVE-2026-50605: Acer Agent Serivce · Improper Access ControlHighVulnerability