Oracle Communications · Kwetsbaarheden Verholpen
Affects Nationaal Cyber Security Centrum OracleSource GCVE Database
Public exploit available · CVSS 2.9 Low →: upgrade to 1.6.3 as a priority.
Data as of 18 Nov 2026, 15:55 UTC
- Patch
- Available – fixed in 1.6.3
CVSS:4.0/AV:N/AC:H/AT:N/PR:N/UI:N/VC:L/VI:L/VA:L/SC:L/SI:L/SA:L/E:P/S:N/AU:Y/U:AmberBase metrics
- Attack Vector
- Network
- Attack Complexity
- High
- Attack Requirements
- None
- Privileges Required
- None
- User Interaction
- None
- Vulnerable system confidentiality
- Low
- Vulnerable system integrity
- Low
- Vulnerable system availability
- Low
- Subsequent system confidentiality
- Low
- Subsequent system integrity
- Low
- Subsequent system availability
- Low
Threat metrics
- Exploit Maturity
- POC
Supplemental metrics
- Safety
- Negligible
- Automatable
- Yes
- Provider Urgency
- Amber
Bold values are the worst case: easiest to exploit or largest impact.
- Attack Vector: Network
- The vulnerable system is bound to the network stack and the set of possible attackers extends beyond the other options listed below, up to and including the entire Internet. Such a vulnerability is often termed “remotely exploitable” and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
- Attack Complexity: High
- The successful attack depends on the evasion or circumvention of security-enhancing techniques in place that would otherwise hinder the attack. These include: Evasion of exploit mitigation techniques, for example, circumvention of address space randomization (ASLR) or data execution prevention (DEP) must be performed for the attack to be successful; Obtaining target-specific secrets. The attacker must gather some target-specific secret before the attack can be successful. A secret is any piece of information that cannot be obtained through any amount of reconnaissance. To obtain the secret the attacker must perform additional attacks or break otherwise secure measures (e.g. knowledge of a secret key may be needed to break a crypto channel). This operation must be performed for each attacked target.
- Attack Requirements: None
- The successful attack does not depend on the deployment and execution conditions of the vulnerable system. The attacker can expect to be able to reach the vulnerability and execute the exploit under all or most instances of the vulnerability.
- Privileges Required: None
- The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files of the vulnerable system to carry out an attack.
- User Interaction: None
- The vulnerable system can be exploited without interaction from any human user, other than the attacker.
- Vulnerable system confidentiality: Low
- There is some loss of confidentiality. Access to some restricted information is obtained, but the attacker does not have control over what information is obtained, or the amount or kind of loss is limited. The information disclosure does not cause a direct, serious loss to the Vulnerable System.
- Vulnerable system integrity: Low
- Modification of data is possible, but the attacker does not have control over the consequence of a modification, or the amount of modification is limited. The data modification does not have a direct, serious impact to the Vulnerable System.
- Vulnerable system availability: Low
- Performance is reduced or there are interruptions in resource availability. Even if repeated exploitation of the vulnerability is possible, the attacker does not have the ability to completely deny service to legitimate users. The resources in the Vulnerable System are either partially available all of the time, or fully available only some of the time, but overall there is no direct, serious consequence to the Vulnerable System.
- Subsequent system confidentiality: Low
- There is some loss of confidentiality. Access to some restricted information is obtained, but the attacker does not have control over what information is obtained, or the amount or kind of loss is limited. The information disclosure does not cause a direct, serious loss to the Subsequent System.
- Subsequent system integrity: Low
- Modification of data is possible, but the attacker does not have control over the consequence of a modification, or the amount of modification is limited. The data modification does not have a direct, serious impact to the Subsequent System.
- Subsequent system availability: Low
- Performance is reduced or there are interruptions in resource availability. Even if repeated exploitation of the vulnerability is possible, the attacker does not have the ability to completely deny service to legitimate users. The resources in the Subsequent System are either partially available all of the time, or fully available only some of the time, but overall there is no direct, serious consequence to the Subsequent System.
- Exploit Maturity: POC
- Based on threat intelligence sources each of the following must apply: · Proof-of-concept is publicly available · No knowledge of reported attempts to exploit this vulnerability · No knowledge of publicly available solutions used to simplify attempts to exploit the vulnerability
- Safety: Negligible
- Consequences of the vulnerability meet definition of IEC 61508 consequence category "negligible."
- Automatable: Yes
- Attackers can reliably automate all 4 steps of the kill chain. These steps are reconnaissance, weaponization, delivery, and exploitation (e.g., the vulnerability is “wormable”).
- Provider Urgency: Amber
- Provider has assessed the impact of this vulnerability as having a moderate urgency.
Definitions: FIRST CVSS v4.0 specification.
Exploitation evidence
Disclosed: evidence found.
CVE published 24 Feb 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponized: evidence found.
CVSS exploit maturity: proof of concept public
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors
A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), CVSS vector, the Metasploit, Exploit-DB and nuclei-templates index as of 17 Nov 2026.
- Disclosed
- The CVE record is public on cve.org. Its publication is t = 0.
- Detectable
- A public nuclei template can find exposed instances, for defenders and attackers alike.
- Weaponized
- A Metasploit exploit module or Exploit-DB entry exists (Metasploit scanner modules do not count), or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
- Exploited in the wild
- CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
- Observed by OffSeq Mirage
- OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.
Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.
What to do
Upgrade CIRCL and cloudflare/circl to 1.6.3.
Affected software
| Product | Affected | Fixed in |
|---|---|---|
| CloudflareCIRCL | Affected
| Fixed in
|
GitHubcloudflare/circlpkg:github/cloudflare/circlOther threats | Affected
| Fixed in
|
Check your own hosts for these packages with threat-finder (opens in a new tab), our free open-source scanner.
AI-suggested
Oracle has released official patches for all affected products as part of the November 2026 Critical Security Patch Update. Customers are strongly advised to apply these patches immediately to mitigate the vulnerabilities. Oracle recommends remaining on actively-supported versions and not delaying patch application. No additional mitigations beyond patching are specified in the advisory.
Description
Oracle has released a Critical Security Patch Update (CSPU) in November 2026 addressing numerous vulnerabilities across multiple Oracle products including Oracle Communications Unified Assurance, Oracle Communications Billing and Revenue Management, Oracle Primavera Unifier, Oracle Java SE, and various open source components integrated into Oracle products. The update includes 655 new security patches targeting both Oracle code and third-party components. Customers are strongly advised to apply these patches promptly to mitigate risks associated with these vulnerabilities.
Impact
The vulnerabilities addressed by this update are considered critical and affect a broad range of Oracle products and embedded third-party components. Failure to apply these patches may expose organizations to security risks including potential exploitation of known vulnerabilities. Oracle has reported attempts to exploit previously patched vulnerabilities, highlighting the importance of timely patching. The exact impact varies by product and vulnerability but collectively represents a significant security risk if left unmitigated.
Summary
This Critical Security Patch Update from Oracle addresses a wide range of security vulnerabilities affecting multiple Oracle product families and embedded open source libraries. The update includes fixes for Oracle Communications products, Oracle Java SE, and other Oracle software such as Oracle Primavera Unifier and Oracle Communications Billing and Revenue Management. Additionally, vulnerabilities in third-party components like Ruby libraries, Node.js, OpenSSL, Apache Tomcat, and others are also patched. Oracle emphasizes the importance of applying these patches without delay, as there have been reports of attempted exploitation of previously patched vulnerabilities due to customers not applying updates. The advisory lists affected products and versions with links to patch availability and installation instructions.
- CWE-425Direct Request (Forced Browsing) (opens in a new tab)
Base weaknessOWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The web application does not adequately enforce appropriate authorization on all restricted URLs, scripts, or files.
Architecture and Design · Operation
Apply appropriate access control authorizations for each access to all restricted URLs, scripts or files.
Architecture and Design
Consider using MVC based frameworks such as Struts.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-125Out-of-bounds Read (opens in a new tab)
Base weaknessCWE Top 25 (2025): #8
The product reads data past the end, or before the beginning, of the intended buffer.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Architecture and Design · Language Selection
Use a language that provides appropriate memory abstractions.
- OWASP Cheat Sheets
- Attack patterns
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-347Improper Verification of Cryptographic Signature (opens in a new tab)
Base weaknessOWASP Top 10 A04:2025: Cryptographic Failures (opens in a new tab)
The product does not verify, or incorrectly verifies, the cryptographic signature for data.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-617Reachable Assertion (opens in a new tab)
Base weakness
The product contains an assert() or similar statement that can be triggered by an attacker, which leads to an application exit or other behavior that is more severe than necessary.
Implementation
If the assertion statement is required (e.g., for security or reliability), change the invoking code to avoid the conditions that trigger the assertion.
Implementation
Consider changing the assertion to some other less "fatal" error. This might not be easy to implement, since other code may be needed to handle the error.
Implementation
Make sensitive open/close operations non-reachable from directly user-controlled data (e.g. open/close resources)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-89Improper Neutralization of Special Elements used in an SQL Command (SQL Injection) (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #2OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product constructs all or part of an SQL command using externally-influenced input from an upstream component, but it does not neutralize or incorrectly neutralizes special elements that could modify the intended SQL command when it is sent to a downstream component. Without sufficient removal or quoting of SQL syntax in user-controllable inputs, the generated SQL query can cause those inputs to be interpreted as SQL instead of ordinary user data.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design · Parameterization
If available, use structured mechanisms that automatically enforce the separation between data and code. These mechanisms may be able to provide the relevant quoting, encoding, and validation automatically, instead of relying on the developer to provide this capability at every point where output is generated.
Architecture and Design · Operation · Environment Hardening
Run your code using the lowest privileges that are required to accomplish the necessary tasks. If possible, create isolated accounts with limited privileges that are only used for a single task. That way, a successful attack will not immediately give the attacker access to the rest of the software or its environment.
- OWASP Cheat Sheets
- Attack patterns
- Command Line Execution through SQL Injection (opens in a new tab)
- Object Relational Mapping Injection (opens in a new tab)
- SQL Injection through SOAP Parameter Tampering (opens in a new tab)
- Expanding Control over the Operating System from the Database (opens in a new tab)
- SQL Injection (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-787Out-of-bounds Write (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #5
The product writes data past the end, or before the beginning, of the intended buffer.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Operation · Build and Compilation · Environment Hardening
Use automatic buffer overflow detection mechanisms that are offered by certain compilers or compiler extensions. Examples include: the Microsoft Visual Studio /GS flag, Fedora/Red Hat FORTIFY_SOURCE GCC flag, StackGuard, and ProPolice, which provide various mechanisms including canary-based detection and range/index…
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-77Improper Neutralization of Special Elements used in a Command (Command Injection) (opens in a new tab)
Class weaknessLikelihood of exploit: HighCWE Top 25 (2025): #23OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product constructs all or part of a command using externally-influenced input from an upstream component, but it does not neutralize or incorrectly neutralizes special elements that could modify the intended command when it is sent to a downstream component.
Architecture and Design
If at all possible, use library calls rather than external processes to recreate the desired functionality.
Implementation
If possible, ensure that all external commands called from the program are statically created.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-290Authentication Bypass by Spoofing (opens in a new tab)
Base weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
This attack-focused weakness is caused by incorrectly implemented authentication schemes that are subject to spoofing attacks.
- OWASP Cheat Sheets
- Attack patterns
- Creating a Rogue Certification Authority Certificate (opens in a new tab)
- Web Services API Signature Forgery Leveraging Hash Function Extension Weakness (opens in a new tab)
- Signature Spoof (opens in a new tab)
- Signature Spoofing by Misrepresentation (opens in a new tab)
- Session Credential Falsification through Prediction (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-772Missing Release of Resource after Effective Lifetime (opens in a new tab)
Base weaknessLikelihood of exploit: High
The product does not release a resource after its effective lifetime has ended, i.e., after the resource is no longer needed.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Implementation
It is good practice to be responsible for freeing all resources you allocate and to be consistent with how and where you free resources in a function. If you allocate resources that you intend to free upon completion of the function, you must be sure to free the resources at all exit points for that function including…
Operation · Architecture and Design · Resource Limitation
Use resource-limiting settings provided by the operating system or environment. For example, when managing system resources in POSIX, setrlimit() can be used to set limits for certain types of resources, and getrlimit() can determine how many resources are available.
- Attack patterns
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-674Uncontrolled Recursion (opens in a new tab)
Class weakness
The product does not properly control the amount of recursion that takes place, consuming excessive resources, such as allocated memory or the program stack.
Implementation
Ensure that an end condition will be reached under all logic conditions. The end condition may include checking against the depth of recursion and exiting with an error if the recursion goes too deep. The complexity of the end condition contributes to the effectiveness of this action.
Implementation
Increase the stack size.
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-416Use After Free (opens in a new tab)
Variant weaknessLikelihood of exploit: HighCWE Top 25 (2025): #7
The product reuses or references memory after it has been freed. At some point afterward, the memory may be allocated again and saved in another pointer, while the original pointer references a location somewhere within the new allocation. Any operations using the original pointer are no longer valid because the memory "belongs" to the code that operates on the new pointer.
Architecture and Design · Language Selection
Choose a language that provides automatic memory management.
Implementation · Attack Surface Reduction
When freeing pointers, be sure to set them to NULL once they are freed. However, the utilization of multiple or complex data structures may lower the usefulness of this strategy.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-436Interpretation Conflict (opens in a new tab)
Class weaknessOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
Product A handles inputs or steps differently than Product B, which causes A to perform incorrect actions based on its perception of B's state.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-862Missing Authorization (opens in a new tab)
Class weaknessLikelihood of exploit: HighCWE Top 25 (2025): #4OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product does not perform an authorization check when an actor attempts to access a resource or perform an action.
Architecture and Design
Divide the product into anonymous, normal, privileged, and administrative areas. Reduce the attack surface by carefully mapping roles with data and functionality. Use role-based access control (RBAC) to enforce the roles at the appropriate boundaries.
Architecture and Design
Ensure that access control checks are performed related to the business logic. These checks may be different than the access control checks that are applied to more generic resources such as files, connections, processes, memory, and database records.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-22Improper Limitation of a Pathname to a Restricted Directory (Path Traversal) (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #6OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product uses external input to construct a pathname that is intended to identify a file or directory that is located underneath a restricted parent directory, but the product does not properly neutralize special elements within the pathname that can cause the pathname to resolve to a location that is outside of the restricted directory.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Architecture and Design
For any security checks that are performed on the client side, ensure that these checks are duplicated on the server side, in order to avoid CWE-602. Attackers can bypass the client-side checks by modifying values after the checks have been performed, or by changing the client to remove the client-side checks…
Implementation · Input Validation
Inputs should be decoded and canonicalized to the application's current internal representation before being validated (CWE-180). Make sure that the application does not decode the same input twice (CWE-174).
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
- Attack patterns
- Path Traversal (opens in a new tab)
- Using Slashes and URL Encoding Combined to Bypass Validation Logic (opens in a new tab)
- Manipulating Web Input to File System Calls (opens in a new tab)
- Using Escaped Slashes in Alternate Encoding (opens in a new tab)
- Using Slashes in Alternate Encoding (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-130Improper Handling of Length Parameter Inconsistency (opens in a new tab)
Base weakness
The product parses a formatted message or structure, but it does not handle or incorrectly handles a length field that is inconsistent with the actual length of the associated data.
Implementation
When processing structured incoming data containing a size field followed by raw data, ensure that you identify and resolve any inconsistencies between the size field and the actual size of the data.
Implementation
Do not let the user control the size of the buffer.
Implementation
Validate that the length of the user-supplied data is consistent with the buffer size.
- OWASP Cheat Sheets
- Attack patterns
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-843Access of Resource Using Incompatible Type (Type Confusion) (opens in a new tab)
Base weakness
The product allocates or initializes a resource such as a pointer, object, or variable using one type, but it later accesses that resource using a type that is incompatible with the original type.
- CWE-590Free of Memory not on the Heap (opens in a new tab)
Variant weakness
The product calls free() on a pointer to memory that was not allocated using associated heap allocation functions such as malloc(), calloc(), or realloc().
Implementation
Only free pointers that you have called malloc on previously. This is the recommended solution. Keep track of which pointers point at the beginning of valid chunks and free them only once.
Implementation
Before freeing a pointer, the programmer should make sure that the pointer was previously allocated on the heap and that the memory belongs to the programmer. Freeing an unallocated pointer will cause undefined behavior in the program.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-606Unchecked Input for Loop Condition (opens in a new tab)
Base weakness
The product does not properly check inputs that are used for loop conditions, potentially leading to a denial of service or other consequences because of excessive looping.
Implementation
Do not use user-controlled data for loop conditions.
Implementation
Perform input validation.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-190Integer Overflow or Wraparound (opens in a new tab)
Base weaknessLikelihood of exploit: Medium
The product performs a calculation that can produce an integer overflow or wraparound when the logic assumes that the resulting value will always be larger than the original value. This occurs when an integer value is incremented to a value that is too large to store in the associated representation. When this occurs, the value may become a very small or negative number.
Requirements
Ensure that all protocols are strictly defined, such that all out-of-bounds behavior can be identified simply, and require strict conformance to the protocol.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
- OWASP Cheat Sheets
- Attack patterns
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-327Use of a Broken or Risky Cryptographic Algorithm (opens in a new tab)
Class weaknessLikelihood of exploit: HighOWASP Top 10 A04:2025: Cryptographic Failures (opens in a new tab)
The product uses a broken or risky cryptographic algorithm or protocol.
Architecture and Design · Libraries or Frameworks
When there is a need to store or transmit sensitive data, use strong, up-to-date cryptographic algorithms to encrypt that data. Select a well-vetted algorithm that is currently considered to be strong by experts in the field, and use well-tested implementations.
Architecture and Design
Ensure that the design allows one cryptographic algorithm to be replaced with another in the next generation or version. Where possible, use wrappers to make the interfaces uniform. This will make it easier to upgrade to stronger algorithms.
Architecture and Design
Carefully manage and protect cryptographic keys (see CWE-320). If the keys can be guessed or stolen, then the strength of the cryptography itself is irrelevant.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- GCVE source
- db.gcve.eu
- Csaf Category
- csaf_security_advisory
- Csaf Version
- 2.0
- Publisher
- Nationaal Cyber Security Centrum
- Advisory ID
- NCSC-2026-0498
- CVE Count
- 27
- Additional Cves
- CVE-2026-3198, CVE-2026-9076, CVE-2026-9547, CVE-2026-22018, CVE-2026-27135, CVE-2026-41889, CVE-2026-41989, CVE-2026-47242, CVE-2026-47737, CVE-2026-53495, CVE-2026-54297, CVE-2026-54522, CVE-2026-57438, CVE-2026-63435, CVE-2026-67420, CVE-2026-71557, CVE-2026-76957, CVE-2026-85396, CVE-2026-87022, CVE-2026-88816, CVE-2026-89161, CVE-2026-91777, CVE-2026-93546, CVE-2026-102278, CVE-2026-111497, CVE-2026-114820
- Severity Source
- AI-assessed (no CVSS data)
References
Community reviews
Related threats
- Oracle MySQL · Kwetsbaarheden VerholpenHighVulnerability
- Oracle PeopleSoft Enterprise · Kwetsbaarheden VerholpenHighVulnerability
- Oracle Enterprise Manager · Kwetsbaarheden VerholpenUnratedVulnerability
- Oracle Commerce Platform · Kwetsbaarheden VerholpenHighVulnerability
- Oracle Java SE en GraalVM · Kwetsbaarheden VerholpenHighVulnerability