CVE-2026-54512VulnerabilityPublished 6 Oct 2026Updated 26 Oct 2026

Red Hat Security Advisory: Apicurio Registry (container images) release and security update [ 3.3.3 GA ]

Affects Red HatSource GCVE Database

Mentioned vulnerabilities

Authoritative record:CVE-2026-54512· High 8.1

Not known to be exploited · CVSS 8.1 High · fixed in Red Hat package updates : patch Red Hat jackson-databind soon.

Data as of 26 Oct 2026, 17:16 UTC

CVSS 3.1 base score

8.1High

How severe the flaw is on the 0–10 CVSS scale.

EPSS: 0.9% chance of exploitation in 30 days – higher than 60% of CVEsExploit Prediction Scoring System: the likelihood attackers will use this flaw soon.
Patch: Available – fixed in 3.1.4, 2.21.4, 2.18.8

CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H

Attack Vector: Network
Attack Complexity: High
Privileges Required: None
User Interaction: None
Scope: Unchanged
Confidentiality: High
Integrity: High
Availability: High

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable component is bound to the network stack and the set of possible attackers extends beyond the other options listed, up to and including the entire Internet. Such a vulnerability is often termed 'remotely exploitable' and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: High: A successful attack depends on conditions beyond the attacker's control. That is, a successful attack cannot be accomplished at will, but requires the attacker to invest in some measurable amount of effort in preparation or execution against the vulnerable component before a successful attack can be expected. For example, a successful attack may require an attacker to: gather knowledge about the environment in which the vulnerable target/component exists; prepare the target environment to improve exploit reliability; or inject themselves into the logical network path between the target and the resource requested by the victim in order to read and/or modify network communications (e.g., a man in the middle attack).
Privileges Required: None: The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files to carry out an attack.
User Interaction: None: The vulnerable system can be exploited without any interaction from any user.
Scope: Unchanged: An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
Confidentiality: High: There is total loss of confidentiality, resulting in all resources within the impacted component being divulged to the attacker. Alternatively, access to only some restricted information is obtained, but the disclosed information presents a direct, serious impact.
Integrity: High: There is a total loss of integrity, or a complete loss of protection. For example, the attacker is able to modify any/all files protected by the impacted component. Alternatively, only some files can be modified, but malicious modification would present a direct, serious consequence to the impacted component.
Availability: High: There is total loss of availability, resulting in the attacker being able to fully deny access to resources in the impacted component; this loss is either sustained (while the attacker continues to deliver the attack) or persistent (the condition persists even after the attack has completed). Alternatively, the attacker has the ability to deny some availability, but the loss of availability presents a direct, serious consequence to the impacted component (e.g., the attacker cannot disrupt existing connections, but can prevent new connections; the attacker can repeatedly exploit a vulnerability that, in each instance of a successful attack, leaks a only small amount of memory, but after repeated exploitation causes a service to become completely unavailable).

Definitions: FIRST CVSS v3.1 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 23 Jun 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponised: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 26 Oct 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponised: Public exploit code exists in Metasploit or Exploit-DB, or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

Upgrade jackson-databind and com.fasterxml.jackson.core/jackson-databind to 3.1.4, 2.21.4 or 2.18.8.

Affected software

Product	Affected	Fixed in
FasterXMLjackson-databind	Affected >=3.0.0 <3.1.4	Fixed in 3.1.4
FasterXMLjackson-databind	Affected >=2.19.0 <2.21.4	Fixed in 2.21.4
FasterXMLjackson-databind	Affected >=2.10.0 <2.18.8	Fixed in 2.18.8
Mavencom.fasterxml.jackson.core/jackson-databind`pkg:maven/com.fasterxml.jackson.core/jackson-databind`Other threats	Affected >=2.10.0 <2.18.8 >=2.18.0 <2.21.4 >=3.0.0 <3.1.4	Fixed in 2.18.8 2.21.4 3.1.4

Check your own hosts for these packages with threat-finder (opens in a new tab), our free open-source scanner.

Description

This release of Red Hat build of Apicurio Registry 3.3.3 GA includes the following security fixes. Security Fix(es): * netty-codec-http: Memory exhaustion in netty-codec-http (decompression bomb) [rhint-serv-3] (CVE-2026-59899) * netty-codec-http: Memory exhaustion in netty-codec-http (decompression bomb) [rhint-serv-3.2] (CVE-2026-59899) * netty-codec-http2: Denial of Service via HTTP/2 DATA frame memory leak [rhint-serv-3.2] (CVE-2026-56819) * netty-codec-http2: Denial of Service via HTTP/2 DATA frame memory leak [rhint-serv-3] (CVE-2026-56819) * netty-codec-http: Security control bypass allows unauthorized requests via null origin header [rhint-serv-3.2] (CVE-2026-56746) * netty-codec-http: Security control bypass allows unauthorized requests via null origin header [rhint-serv-3] (CVE-2026-56746) * netty-codec-http: Denial of Service via memory exhaustion in SPDY-to-HTTP codec [rhint-serv-3.2] (CVE-2026-56745) * netty-codec-http: Denial of Service via memory exhaustion in SPDY-to-HTTP codec [rhint-serv-3] (CVE-2026-56745) * netty-codec-http: Denial of Service via SPDY SETTINGS frame processing [rhint-serv-3.2] (CVE-2026-55831) * netty-codec-http: Denial of Service via SPDY SETTINGS frame processing [rhint-serv-3] (CVE-2026-55831) * netty-codec-http: Denial of Service via SPDY header decompression amplification [rhint-serv-3.2] (CVE-2026-55833) * netty-codec-http: Denial of Service via SPDY header decompression amplification [rhint-serv-3] (CVE-2026-55833) * jackson-databind: Security bypass allows arbitrary code execution [rhint-serv-3.2] (CVE-2026-54513) * jackson-databind: Security bypass allows arbitrary code execution [rhint-serv-3] (CVE-2026-54513) * jackson-databind: Arbitrary code execution via PolymorphicTypeValidator bypass [rhint-serv-3] (CVE-2026-54512) * jackson-databind: Arbitrary code execution via PolymorphicTypeValidator bypass [rhint-serv-3.2] (CVE-2026-54512) For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.

CWE-502Deserialization of Untrusted Data (opens in a new tab)
Base weaknessLikelihood of exploit: MediumCWE Top 25 (2025): #15OWASP Top 10 A08:2025: Software or Data Integrity Failures (opens in a new tab)
The product deserializes untrusted data without sufficiently ensuring that the resulting data will be valid.
Architecture and Design · Implementation
If available, use the signing/sealing features of the programming language to assure that deserialized data has not been tainted. For example, a hash-based message authentication code (HMAC) could be used to ensure that data has not been modified.
Implementation
When deserializing data, populate a new object rather than just deserializing. The result is that the data flows through safe input validation and that the functions are safe.
Implementation
Explicitly define a final object() to prevent deserialization.
OWASP Cheat Sheets
Abuse Case (opens in a new tab)
Deserialization (opens in a new tab)
XML Security (opens in a new tab)
XML External Entity Prevention (opens in a new tab)
Software Supply Chain Security (opens in a new tab)
OWASP ASVS 4.0.3
V1.5.2 (opens in a new tab)
V5.5.3 (opens in a new tab)
V5.5.1 (opens in a new tab)
Attack patterns
Object Injection (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-184Incomplete List of Disallowed Inputs (opens in a new tab)
Base weaknessOWASP Top 10 A03:2021: Injection (opens in a new tab)
The product implements a protection mechanism that relies on a list of inputs (or properties of inputs) that are not allowed by policy or otherwise require other action to neutralize before additional processing takes place, but the list is incomplete.
Implementation · Input Validation
Do not rely exclusively on detecting disallowed inputs. There are too many variants to encode a character, especially when different environments are used, so there is a high likelihood of missing some variants. Only use detection of disallowed inputs as a mechanism for detecting suspicious activity.
Attack patterns
Double Encoding (opens in a new tab)
Command Delimiters (opens in a new tab)
Flash Injection (opens in a new tab)
Using Leading 'Ghost' Character Sequences to Bypass Input Filters (opens in a new tab)
Exploiting Multiple Input Interpretation Layers (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-770Allocation of Resources Without Limits or Throttling (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #25
The product allocates a reusable resource or group of resources on behalf of an actor without imposing any intended restrictions on the size or number of resources that can be allocated.
Requirements
Clearly specify the minimum and maximum expectations for capabilities, and dictate which behaviors are acceptable when resource allocation reaches limits.
Architecture and Design
Limit the amount of resources that are accessible to unprivileged users. Set per-user limits for resources. Allow the system administrator to define these limits. Be careful to avoid CWE-410.
Architecture and Design
Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended.
OWASP Cheat Sheets
Abuse Case (opens in a new tab)
OWASP ASVS 4.0.3
V8.1.4 (opens in a new tab)
V13.4.1 (opens in a new tab)
V11.1.4 (opens in a new tab)
Attack patterns
XML Ping of the Death (opens in a new tab)
Exponential Data Expansion (opens in a new tab)
Serialized Data Parameter Blowup (opens in a new tab)
Serialized Data with Nested Payloads (opens in a new tab)
Oversized Serialized Data Payloads (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-409Improper Handling of Highly Compressed Data (Data Amplification) (opens in a new tab)
Base weakness
The product does not handle or incorrectly handles a compressed input with a very high compression ratio that produces a large output.
OWASP Cheat Sheets
File Upload (opens in a new tab)
OWASP ASVS 4.0.3
V12.1.2 (opens in a new tab)
V12.1.1 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-772Missing Release of Resource after Effective Lifetime (opens in a new tab)
Base weaknessLikelihood of exploit: High
The product does not release a resource after its effective lifetime has ended, i.e., after the resource is no longer needed.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Implementation
It is good practice to be responsible for freeing all resources you allocate and to be consistent with how and where you free resources in a function. If you allocate resources that you intend to free upon completion of the function, you must be sure to free the resources at all exit points for that function including…
Operation · Architecture and Design · Resource Limitation
Use resource-limiting settings provided by the operating system or environment. For example, when managing system resources in POSIX, setrlimit() can be used to set limits for certain types of resources, and getrlimit() can determine how many resources are available.
Attack patterns
HTTP DoS (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-807Reliance on Untrusted Inputs in a Security Decision (opens in a new tab)
Base weaknessLikelihood of exploit: HighOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The product uses a protection mechanism that relies on the existence or values of an input, but the input can be modified by an untrusted actor in a way that bypasses the protection mechanism.
Architecture and Design · Attack Surface Reduction
Store state information and sensitive data on the server side only.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design
For any security checks that are performed on the client side, ensure that these checks are duplicated on the server side, in order to avoid CWE-602. Attackers can bypass the client-side checks by modifying values after the checks have been performed, or by changing the client to remove the client-side checks…
OWASP Cheat Sheets
Secure Design Principles (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-911Improper Update of Reference Count (opens in a new tab)
Base weaknessLikelihood of exploit: Medium
The product uses a reference count to manage a resource, but it does not update or incorrectly updates the reference count.

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Affected software

Description

WeaknessesCWE-502, CWE-184, CWE-770 +4

Technical details

References

Community reviews

Related threats