CVE-2026-33818VulnerabilityPublished 19 Oct 2026Updated 26 Oct 2026

Red Hat Security Advisory: DevWorkspace Operator 1.0.0 release

Affects Red HatSource GCVE Database

Authoritative record:CVE-2026-33818· High 7.5

Not known to be exploited · CVSS 7.5 High · fixed in Red Hat package updates : patch Red Hat asn1 soon.

Data as of 26 Oct 2026, 17:16 UTC

CVSS 3.1 base score

7.5High

How severe the flaw is on the 0–10 CVSS scale.

EPSS: 0.5% chance of exploitation in 30 days – higher than 46% of CVEsExploit Prediction Scoring System: the likelihood attackers will use this flaw soon.
Patch: Available – fixed in 1.27.0-rc.3, 1.26.6, 1.25.13

CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

Attack Vector: Network
Attack Complexity: Low
Privileges Required: None
User Interaction: None
Scope: Unchanged
Confidentiality: None
Integrity: None
Availability: High

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable component is bound to the network stack and the set of possible attackers extends beyond the other options listed, up to and including the entire Internet. Such a vulnerability is often termed 'remotely exploitable' and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: Low: Specialized access conditions or extenuating circumstances do not exist. An attacker can expect repeatable success against the vulnerable component.
Privileges Required: None: The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files to carry out an attack.
User Interaction: None: The vulnerable system can be exploited without any interaction from any user.
Scope: Unchanged: An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
Confidentiality: None: There is no loss of confidentiality within the impacted component.
Integrity: None: There is no loss of integrity within the impacted component.
Availability: High: There is total loss of availability, resulting in the attacker being able to fully deny access to resources in the impacted component; this loss is either sustained (while the attacker continues to deliver the attack) or persistent (the condition persists even after the attack has completed). Alternatively, the attacker has the ability to deny some availability, but the loss of availability presents a direct, serious consequence to the impacted component (e.g., the attacker cannot disrupt existing connections, but can prevent new connections; the attacker can repeatedly exploit a vulnerability that, in each instance of a successful attack, leaks a only small amount of memory, but after repeated exploitation causes a service to become completely unavailable).

Definitions: FIRST CVSS v3.1 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 13 Aug 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponised: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 26 Oct 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponised: Public exploit code exists in Metasploit or Exploit-DB, or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

Upgrade encoding/asn1 to 1.27.0-rc.3, 1.26.6 or 1.25.13.

Affected software

Product	Affected	Fixed in
Go standard libraryencoding/asn1	Affected >=1.27.0-0 <1.27.0-rc.3	Fixed in 1.27.0-rc.3
Go standard libraryencoding/asn1	Affected >=1.26.0-0 <1.26.6	Fixed in 1.26.6
Go standard libraryencoding/asn1	Affected <1.25.13	Fixed in 1.25.13
Goencoding/asn1`pkg:golang/encoding/asn1`Other threats	Affected <1.25.13 >=1.26.0-0 <1.26.6 >=1.27.0-0 <1.27.0-rc.3	Fixed in 1.25.13 1.26.6 1.27.0-rc.3

Check your own hosts for these packages with threat-finder (opens in a new tab), our free open-source scanner.

Description

The DevWorkspace Operator extends OpenShift to provide DevWorkspace support.

CWE-776Improper Restriction of Recursive Entity References in DTDs ('XML Entity Expansion') (opens in a new tab)
Base weaknessLikelihood of exploit: MediumOWASP Top 10 A02:2025: Security Misconfiguration (opens in a new tab)
The product uses XML documents and allows their structure to be defined with a Document Type Definition (DTD), but it does not properly control the number of recursive definitions of entities.
Operation
If possible, prohibit the use of DTDs or use an XML parser that limits the expansion of recursive DTD entities.
Implementation
Before parsing XML files with associated DTDs, scan for recursive entity declarations and do not continue parsing potentially explosive content.
OWASP Cheat Sheets
File Upload (opens in a new tab)
OWASP ASVS 4.0.3
V12.1.1 (opens in a new tab)
Attack patterns
Exponential Data Expansion (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-770Allocation of Resources Without Limits or Throttling (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #25
The product allocates a reusable resource or group of resources on behalf of an actor without imposing any intended restrictions on the size or number of resources that can be allocated.
Requirements
Clearly specify the minimum and maximum expectations for capabilities, and dictate which behaviors are acceptable when resource allocation reaches limits.
Architecture and Design
Limit the amount of resources that are accessible to unprivileged users. Set per-user limits for resources. Allow the system administrator to define these limits. Be careful to avoid CWE-410.
Architecture and Design
Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended.
OWASP Cheat Sheets
Abuse Case (opens in a new tab)
OWASP ASVS 4.0.3
V8.1.4 (opens in a new tab)
V13.4.1 (opens in a new tab)
V11.1.4 (opens in a new tab)
Attack patterns
XML Ping of the Death (opens in a new tab)
Exponential Data Expansion (opens in a new tab)
Serialized Data Parameter Blowup (opens in a new tab)
Serialized Data with Nested Payloads (opens in a new tab)
Oversized Serialized Data Payloads (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-835Loop with Unreachable Exit Condition ('Infinite Loop') (opens in a new tab)
Base weakness
The product contains an iteration or loop with an exit condition that cannot be reached, i.e., an infinite loop.
CWE-346Origin Validation Error (opens in a new tab)
Class weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
The product does not properly verify that the source of data or communication is valid.
OWASP Cheat Sheets
OWASP Authentication (opens in a new tab)
OWASP ASVS 4.0.3
V14.5.2 (opens in a new tab)
V14.5.3 (opens in a new tab)
V1.4.4 (opens in a new tab)
Attack patterns
JSON Hijacking (aka JavaScript Hijacking) (opens in a new tab)
Cache Poisoning (opens in a new tab)
DNS Cache Poisoning (opens in a new tab)
Exploit Script-Based APIs (opens in a new tab)
Application API Message Manipulation via Man-in-the-Middle (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-79Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #1OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product does not neutralize or incorrectly neutralizes user-controllable input before it is placed in output that is used as a web page that is served to other users.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Implementation · Architecture and Design
Understand the context in which your data will be used and the encoding that will be expected. This is especially important when transmitting data between different components, or when generating outputs that can contain multiple encodings at the same time, such as web pages or multi-part mail messages.
Architecture and Design · Implementation · Attack Surface Reduction
Understand all the potential areas where untrusted inputs can enter your software: parameters or arguments, cookies, anything read from the network, environment variables, reverse DNS lookups, query results, request headers, URL components, e-mail, files, filenames, databases, and any external systems that provide…
OWASP Cheat Sheets
Cross Site Scripting Prevention (opens in a new tab)
DOM based XSS Prevention (opens in a new tab)
Injection Prevention (opens in a new tab)
Abuse Case (opens in a new tab)
Deserialization (opens in a new tab)
OWASP ASVS 4.0.3
V5.3.3 (opens in a new tab)
V1.5.1 (opens in a new tab)
Attack patterns
XSS Using MIME Type Mismatch (opens in a new tab)
DOM-Based XSS (opens in a new tab)
Reflected XSS (opens in a new tab)
Stored XSS (opens in a new tab)
Cross-Site Scripting (XSS) (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-1050Excessive Platform Resource Consumption within a Loop (opens in a new tab)
Base weakness
The product has a loop body or loop condition that contains a control element that directly or indirectly consumes platform resources, e.g. messaging, sessions, locks, or file descriptors.
OWASP Cheat Sheets
File Upload (opens in a new tab)
OWASP ASVS 4.0.3
V12.1.1 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-125Out-of-bounds Read (opens in a new tab)
Base weaknessCWE Top 25 (2025): #8
The product reads data past the end, or before the beginning, of the intended buffer.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Architecture and Design · Language Selection
Use a language that provides appropriate memory abstractions.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
Attack patterns
Overread Buffers (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Affected software

Description

WeaknessesCWE-776, CWE-770, CWE-835 +4

Technical details

References

Community reviews

Related threats