CVE-2025-1930VulnerabilityPublished 10 Mar 2025Updated 5 Nov 2026

Red Hat Security Advisory: firefox security update

Affects Red Hat firefoxSource GCVE Database

Compare

Mentioned vulnerabilities

Authoritative record:CVE-2025-1930· High 8.8

Not known to be exploited · CVSS 8.8 High.

Data as of 5 Nov 2026, 18:19 UTC

CVSS 3.1 base score

8.8High

How severe the flaw is on the 0–10 CVSS scale.

CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H

Attack Vector: Network
Attack Complexity: Low
Privileges Required: None
User Interaction: Required
Scope: Unchanged
Confidentiality: High
Integrity: High
Availability: High

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable component is bound to the network stack and the set of possible attackers extends beyond the other options listed, up to and including the entire Internet. Such a vulnerability is often termed 'remotely exploitable' and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: Low: Specialized access conditions or extenuating circumstances do not exist. An attacker can expect repeatable success against the vulnerable component.
Privileges Required: None: The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files to carry out an attack.
User Interaction: Required: Successful exploitation of this vulnerability requires a user to take some action before the vulnerability can be exploited.
Scope: Unchanged: An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
Confidentiality: High: There is total loss of confidentiality, resulting in all resources within the impacted component being divulged to the attacker. Alternatively, access to only some restricted information is obtained, but the disclosed information presents a direct, serious impact.
Integrity: High: There is a total loss of integrity, or a complete loss of protection. For example, the attacker is able to modify any/all files protected by the impacted component. Alternatively, only some files can be modified, but malicious modification would present a direct, serious consequence to the impacted component.
Availability: High: There is total loss of availability, resulting in the attacker being able to fully deny access to resources in the impacted component; this loss is either sustained (while the attacker continues to deliver the attack) or persistent (the condition persists even after the attack has completed). Alternatively, the attacker has the ability to deny some availability, but the loss of availability presents a direct, serious consequence to the impacted component (e.g., the attacker cannot disrupt existing connections, but can prevent new connections; the attacker can repeatedly exploit a vulnerability that, in each instance of a successful attack, leaks a only small amount of memory, but after repeated exploitation causes a service to become completely unavailable).

Definitions: FIRST CVSS v3.1 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 4 Mar 2025
Detectable: no evidence on record.
No public nuclei template indexed
Weaponized: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 5 Nov 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponized: A Metasploit exploit module or Exploit-DB entry exists (Metasploit scanner modules do not count), or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

Description

Mozilla Firefox is an open-source web browser, designed for standards compliance, performance, and portability. Security Fix(es): * firefox: Use-after-free in WebTransportChild (CVE-2025-1931) * firefox: AudioIPC StreamData could trigger a use-after-free in the Browser process (CVE-2025-1930) * firefox: Unexpected GC during RegExp bailout processing (CVE-2025-1934) * firefox: Clickjacking the registerProtocolHandler info-bar Reporter (CVE-2025-1935) * firefox: thunderbird: Memory safety bugs fixed in Firefox 136, Thunderbird 136, Firefox ESR 128.8, and Thunderbird 128.8 (CVE-2025-1938) * firefox: JIT corruption of WASM i32 return values on 64-bit CPUs (CVE-2025-1933) * firefox: thunderbird: Memory safety bugs fixed in Firefox 136, Thunderbird 136, Firefox ESR 115.21, Firefox ESR 128.8, and Thunderbird 128.8 (CVE-2025-1937) * firefox: Inconsistent comparator in XSLT sorting led to out-of-bounds access (CVE-2025-1932) * firefox: Adding %00 and a fake extension to a jar: URL changed the interpretation of the contents (CVE-2025-1936) For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.

CWE-416Use After Free (opens in a new tab)
Variant weaknessLikelihood of exploit: HighCWE Top 25 (2025): #7
The product reuses or references memory after it has been freed. At some point afterward, the memory may be allocated again and saved in another pointer, while the original pointer references a location somewhere within the new allocation. Any operations using the original pointer are no longer valid because the memory "belongs" to the code that operates on the new pointer.
Architecture and Design · Language Selection
Choose a language that provides automatic memory management.
Implementation · Attack Surface Reduction
When freeing pointers, be sure to set them to NULL once they are freed. However, the utilization of multiple or complex data structures may lower the usefulness of this strategy.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-125Out-of-bounds Read (opens in a new tab)
Base weaknessCWE Top 25 (2025): #8
The product reads data past the end, or before the beginning, of the intended buffer.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Architecture and Design · Language Selection
Use a language that provides appropriate memory abstractions.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
Attack patterns
Overread Buffers (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-843Access of Resource Using Incompatible Type (Type Confusion) (opens in a new tab)
Base weakness
The product allocates or initializes a resource such as a pointer, object, or variable using one type, but it later accesses that resource using a type that is incompatible with the original type.
CWE-460Improper Cleanup on Thrown Exception (opens in a new tab)
Base weaknessLikelihood of exploit: MediumOWASP Top 10 A10:2025: Mishandling of Exceptional Conditions (opens in a new tab)
The product does not clean up its state or incorrectly cleans up its state when an exception is thrown.
Implementation
If one breaks from a loop or function by throwing an exception, make sure that cleanup happens or that you should exit the program. Use throwing exceptions sparsely.
OWASP Cheat Sheets
Logging (opens in a new tab)
Error Handling (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-1021Improper Restriction of Rendered UI Layers or Frames (opens in a new tab)
Base weaknessOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The web application does not restrict or incorrectly restricts frame objects or UI layers that belong to another application or domain.
Implementation
Use the "frame-ancestors" directive in the Content Security Policy, which is intended to define restrictions when it comes to allowing embedded content.
Implementation
The use of X-Frame-Options (now partially obsolete as of September 2026) allows developers of web content to restrict the usage of their application within the form of overlays, frames, or iFrames. The developer can indicate from which domains can frame the content.
Implementation
Use a "frame-breaker" script in each page that should not be framed. This is very helpful for legacy browsers that do not support the X-Frame-Options security feature previously mentioned (which is now partially obsolete).
OWASP Cheat Sheets
Content Security Policy (opens in a new tab)
Secure Design Principles (opens in a new tab)
OWASP ASVS 4.0.3
V14.4.3 (opens in a new tab)
V14.4.7 (opens in a new tab)
Attack patterns
Clickjacking (opens in a new tab)
Flash File Overlay (opens in a new tab)
iFrame Overlay (opens in a new tab)
Task Impersonation (opens in a new tab)
Tapjacking (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-754Improper Check for Unusual or Exceptional Conditions (opens in a new tab)
Class weaknessLikelihood of exploit: MediumOWASP Top 10 A10:2025: Mishandling of Exceptional Conditions (opens in a new tab)
The product does not check or incorrectly checks for unusual or exceptional conditions that are not expected to occur frequently during day to day operation of the product.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Implementation
Check the results of all functions that return a value and verify that the value is expected.
Implementation
If using exception handling, catch and throw specific exceptions instead of overly-general exceptions (CWE-396, CWE-397). Catch and handle exceptions as locally as possible so that exceptions do not propagate too far up the call stack (CWE-705). Avoid unchecked or uncaught exceptions where feasible (CWE-248).
OWASP Cheat Sheets
Logging (opens in a new tab)
Error Handling (opens in a new tab)
OWASP ASVS 4.0.3
V11.1.7 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-120Buffer Copy without Checking Size of Input (Classic Buffer Overflow) (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #11
The product copies an input buffer to an output buffer without verifying that the size of the input buffer is less than the size of the output buffer.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Operation · Build and Compilation · Environment Hardening
Use automatic buffer overflow detection mechanisms that are offered by certain compilers or compiler extensions. Examples include: the Microsoft Visual Studio /GS flag, Fedora/Red Hat FORTIFY_SOURCE GCC flag, StackGuard, and ProPolice, which provide various mechanisms including canary-based detection and range/index…
OWASP Cheat Sheets
Docker Security (opens in a new tab)
XML Security (opens in a new tab)
OWASP ASVS 4.0.3
V5.4.1 (opens in a new tab)
V14.1.2 (opens in a new tab)
V13.3.1 (opens in a new tab)
Attack patterns
Buffer Overflow via Environment Variables (opens in a new tab)
Overflow Buffers (opens in a new tab)
Client-side Injection-induced Buffer Overflow (opens in a new tab)
Filter Failure through Buffer Overflow (opens in a new tab)
MIME Conversion (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

References

Community reviews

Loading reviews…

Exploitation evidence

Description

WeaknessesCWE-416, CWE-125, CWE-843 +4

Technical details

References

Community reviews

Related threats