CVE-2026-55194VulnerabilityPublished 31 Aug 2026Updated 1 Nov 2026

Red Hat Security Advisory: freerdp security update

Affects Red Hat freerdpSource GCVE Database

Compare

Mentioned vulnerabilities

Authoritative record:CVE-2026-55194· High 8.7

Not known to be exploited · CVSS 8.7 High.

Data as of 1 Nov 2026, 08:20 UTC

CVSS 4.0 base score

8.7High

How severe the flaw is on the 0–10 CVSS scale.

EPSS: 0.6% chance of exploitation in 30 days – higher than 49% of CVEsExploit Prediction Scoring System: the likelihood attackers will use this flaw soon.

CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:P/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N

Attack Vector: Network
Attack Complexity: Low
Attack Requirements: None
Privileges Required: None
User Interaction: Passive
Vulnerable system confidentiality: High
Vulnerable system integrity: High
Vulnerable system availability: High
Subsequent system confidentiality: None
Subsequent system integrity: None
Subsequent system availability: None

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable system is bound to the network stack and the set of possible attackers extends beyond the other options listed below, up to and including the entire Internet. Such a vulnerability is often termed “remotely exploitable” and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: Low: The attacker must take no measurable action to exploit the vulnerability. The attack requires no target-specific circumvention to exploit the vulnerability. An attacker can expect repeatable success against the vulnerable system.
Attack Requirements: None: The successful attack does not depend on the deployment and execution conditions of the vulnerable system. The attacker can expect to be able to reach the vulnerability and execute the exploit under all or most instances of the vulnerability.
Privileges Required: None: The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files of the vulnerable system to carry out an attack.
User Interaction: Passive: Successful exploitation of this vulnerability requires limited interaction by the targeted user with the vulnerable system and the attacker’s payload. These interactions would be considered involuntary and do not require that the user actively subvert protections built into the vulnerable system.
Vulnerable system confidentiality: High: There is a total loss of confidentiality, resulting in all information within the Vulnerable System being divulged to the attacker. Alternatively, access to only some restricted information is obtained, but the disclosed information presents a direct, serious impact. For example, an attacker steals the administrator's password, or private encryption keys of a web server.
Vulnerable system integrity: High: There is a total loss of integrity, or a complete loss of protection. For example, the attacker is able to modify any/all files protected by the vulnerable system. Alternatively, only some files can be modified, but malicious modification would present a direct, serious consequence to the vulnerable system.
Vulnerable system availability: High: There is a total loss of availability, resulting in the attacker being able to fully deny access to resources in the Vulnerable System; this loss is either sustained (while the attacker continues to deliver the attack) or persistent (the condition persists even after the attack has completed). Alternatively, the attacker has the ability to deny some availability, but the loss of availability presents a direct, serious consequence to the Vulnerable System (e.g., the attacker cannot disrupt existing connections, but can prevent new connections; the attacker can repeatedly exploit a vulnerability that, in each instance of a successful attack, leaks a only small amount of memory, but after repeated exploitation causes a service to become completely unavailable).
Subsequent system confidentiality: None: There is no loss of confidentiality within the Subsequent System or all confidentiality impact is constrained to the Vulnerable System.
Subsequent system integrity: None: There is no loss of integrity within the Subsequent System or all integrity impact is constrained to the Vulnerable System.
Subsequent system availability: None: There is no impact to availability within the Subsequent System or all availability impact is constrained to the Vulnerable System.

Definitions: FIRST CVSS v4.0 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 19 Aug 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponized: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 31 Oct 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponized: A Metasploit exploit module or Exploit-DB entry exists (Metasploit scanner modules do not count), or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

AI-suggested

Red Hat has released security updates for FreeRDP in Red Hat Enterprise Linux 10 and related products. Users should apply the provided updates as detailed in the Red Hat advisory (RHSA-2026:61378) to remediate these vulnerabilities. No additional mitigation steps are indicated beyond applying the official patches.

Description

Multiple security vulnerabilities have been identified and fixed in FreeRDP, a free implementation of the Remote Desktop Protocol (RDP). These include issues leading to denial of service, memory disclosure, authentication bypass, and arbitrary code execution. The vulnerabilities affect Red Hat Enterprise Linux 10 and related products. Red Hat has released security updates addressing these flaws.

CWE-120Buffer Copy without Checking Size of Input (Classic Buffer Overflow) (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #11
The product copies an input buffer to an output buffer without verifying that the size of the input buffer is less than the size of the output buffer.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Operation · Build and Compilation · Environment Hardening
Use automatic buffer overflow detection mechanisms that are offered by certain compilers or compiler extensions. Examples include: the Microsoft Visual Studio /GS flag, Fedora/Red Hat FORTIFY_SOURCE GCC flag, StackGuard, and ProPolice, which provide various mechanisms including canary-based detection and range/index…
OWASP Cheat Sheets
Docker Security (opens in a new tab)
XML Security (opens in a new tab)
OWASP ASVS 4.0.3
V5.4.1 (opens in a new tab)
V14.1.2 (opens in a new tab)
V13.3.1 (opens in a new tab)
Attack patterns
Buffer Overflow via Environment Variables (opens in a new tab)
Overflow Buffers (opens in a new tab)
Client-side Injection-induced Buffer Overflow (opens in a new tab)
Filter Failure through Buffer Overflow (opens in a new tab)
MIME Conversion (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-1341Multiple Releases of Same Resource or Handle (opens in a new tab)
Base weakness
The product attempts to close or release a resource or handle more than once, without any successful open between the close operations.
Implementation
Change the code's logic so that the resource is only closed once. This might require simplifying or refactoring. This fix can be simple to do in small code blocks, but more difficult when multiple closes are buried within complex conditionals.
Implementation · Refactoring
It can be effective to implement a flag that is (1) set when the resource is opened, (2) cleared when it is closed, and (3) checked before closing. This approach can be useful when there are disparate cases in which closes must be performed.
Implementation · Refactoring
When closing a resource, set the resource's associated variable to NULL or equivalent value for the given language. Some APIs will ignore this null value without causing errors.
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-476NULL Pointer Dereference (opens in a new tab)
Base weaknessLikelihood of exploit: MediumCWE Top 25 (2025): #13OWASP Top 10 A10:2025: Mishandling of Exceptional Conditions (opens in a new tab)
The product dereferences a pointer that it expects to be valid but is NULL.
Implementation
For any pointers that could have been modified or provided from a function that can return NULL, check the pointer for NULL before use. When working with a multithreaded or otherwise asynchronous environment, ensure that proper locking APIs are used to lock before the check, and unlock when it has finished.
Requirements
Select a programming language that is not susceptible to these issues.
Implementation
Check the results of all functions that return a value and verify that the value is non-null before acting upon it.
OWASP Cheat Sheets
Logging (opens in a new tab)
Error Handling (opens in a new tab)
OWASP ASVS 4.0.3
V11.1.7 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-125Out-of-bounds Read (opens in a new tab)
Base weaknessCWE Top 25 (2025): #8
The product reads data past the end, or before the beginning, of the intended buffer.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Architecture and Design · Language Selection
Use a language that provides appropriate memory abstractions.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
Attack patterns
Overread Buffers (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-20Improper Input Validation (opens in a new tab)
Class weaknessLikelihood of exploit: HighCWE Top 25 (2025): #18OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product receives input or data, but it does not validate or incorrectly validates that the input has the properties that are required to process the data safely and correctly.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
Architecture and Design · Attack Surface Reduction
Consider using language-theoretic security (LangSec) techniques that characterize inputs using a formal language and build "recognizers" for that language. This effectively requires parsing to be a distinct layer that effectively enforces a boundary between raw input and internal data representations, instead of…
Architecture and Design · Libraries or Frameworks
Use an input validation framework such as Struts or the OWASP ESAPI Validation API. Note that using a framework does not automatically address all input validation problems; be mindful of weaknesses that could arise from misusing the framework itself (CWE-1173).
Architecture and Design · Implementation · Attack Surface Reduction
Understand all the potential areas where untrusted inputs can enter the product, including but not limited to: parameters or arguments, cookies, anything read from the network, environment variables, reverse DNS lookups, query results, request headers, URL components, e-mail, files, filenames, databases, and any…
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
Injection Prevention (opens in a new tab)
SQL Injection Prevention (opens in a new tab)
Injection Prevention in Java (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
Attack patterns
Buffer Overflow via Environment Variables (opens in a new tab)
Server Side Include (SSI) Injection (opens in a new tab)
Cross Zone Scripting (opens in a new tab)
Command Line Execution through SQL Injection (opens in a new tab)
Object Relational Mapping Injection (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-770Allocation of Resources Without Limits or Throttling (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #25
The product allocates a reusable resource or group of resources on behalf of an actor without imposing any intended restrictions on the size or number of resources that can be allocated.
Requirements
Clearly specify the minimum and maximum expectations for capabilities, and dictate which behaviors are acceptable when resource allocation reaches limits.
Architecture and Design
Limit the amount of resources that are accessible to unprivileged users. Set per-user limits for resources. Allow the system administrator to define these limits. Be careful to avoid CWE-410.
Architecture and Design
Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended.
OWASP Cheat Sheets
Abuse Case (opens in a new tab)
OWASP ASVS 4.0.3
V8.1.4 (opens in a new tab)
V13.4.1 (opens in a new tab)
V11.1.4 (opens in a new tab)
Attack patterns
XML Ping of the Death (opens in a new tab)
Exponential Data Expansion (opens in a new tab)
Serialized Data Parameter Blowup (opens in a new tab)
Serialized Data with Nested Payloads (opens in a new tab)
Oversized Serialized Data Payloads (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-191Integer Underflow (Wrap or Wraparound) (opens in a new tab)
Base weakness
The product subtracts one value from another, such that the result is less than the minimum allowable integer value, which produces a value that is not equal to the correct result.
CWE-287Improper Authentication (opens in a new tab)
Class weaknessLikelihood of exploit: HighOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
When an actor claims to have a given identity, the product does not prove or insufficiently proves that the claim is correct.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
Architecture and Design · Libraries or Frameworks
Use an authentication framework or library such as the OWASP ESAPI Authentication feature.
OWASP Cheat Sheets
OWASP Authentication (opens in a new tab)
OWASP ASVS 4.0.3
V2.8.5 (opens in a new tab)
V2.8.4 (opens in a new tab)
V9.2.3 (opens in a new tab)
Attack patterns
Fake the Source of Data (opens in a new tab)
Utilizing REST's Trust in the System Resource to Obtain Sensitive Data (opens in a new tab)
Session Hijacking (opens in a new tab)
Token Impersonation (opens in a new tab)
Upload a Web Shell to a Web Server (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Description

AI analysisMachine-generated, updated 1 Nov 2026, 05:22 UTC

WeaknessesCWE-120, CWE-1341, CWE-476 +5

Technical details

References

Community reviews

Related threats