CVE-2025-61726VulnerabilityPublished 4 Jun 2026Updated 26 Oct 2026

Red Hat Security Advisory: image-builder security update

Affects Red Hat image-builderSource GCVE Database

Mentioned vulnerabilities

Authoritative record:CVE-2025-61726· High 7.5

Not known to be exploited · CVSS 7.5 High : upgrade Red Hat url to 1.25.6 or 1.24.12 soon.

Data as of 26 Oct 2026, 17:58 UTC

CVSS 3.1 base score

7.5High

How severe the flaw is on the 0–10 CVSS scale.

EPSS: 2.2% chance of exploitation in 30 days – higher than 83% of CVEsExploit Prediction Scoring System: the likelihood attackers will use this flaw soon.
Patch: Available – fixed in 1.25.6, 1.24.12

CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

Attack Vector: Network
Attack Complexity: Low
Privileges Required: None
User Interaction: None
Scope: Unchanged
Confidentiality: None
Integrity: None
Availability: High

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable component is bound to the network stack and the set of possible attackers extends beyond the other options listed, up to and including the entire Internet. Such a vulnerability is often termed 'remotely exploitable' and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: Low: Specialized access conditions or extenuating circumstances do not exist. An attacker can expect repeatable success against the vulnerable component.
Privileges Required: None: The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files to carry out an attack.
User Interaction: None: The vulnerable system can be exploited without any interaction from any user.
Scope: Unchanged: An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
Confidentiality: None: There is no loss of confidentiality within the impacted component.
Integrity: None: There is no loss of integrity within the impacted component.
Availability: High: There is total loss of availability, resulting in the attacker being able to fully deny access to resources in the impacted component; this loss is either sustained (while the attacker continues to deliver the attack) or persistent (the condition persists even after the attack has completed). Alternatively, the attacker has the ability to deny some availability, but the loss of availability presents a direct, serious consequence to the impacted component (e.g., the attacker cannot disrupt existing connections, but can prevent new connections; the attacker can repeatedly exploit a vulnerability that, in each instance of a successful attack, leaks a only small amount of memory, but after repeated exploitation causes a service to become completely unavailable).

Definitions: FIRST CVSS v3.1 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 28 Jan 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponised: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 26 Oct 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponised: Public exploit code exists in Metasploit or Exploit-DB, or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

Upgrade net/url to 1.25.6 or 1.24.12.

Affected software

Product	Affected	Fixed in
Go standard librarynet/url	Affected >=1.25.0 <1.25.6	Fixed in 1.25.6
Go standard librarynet/url	Affected <1.24.12	Fixed in 1.24.12
Gonet/url`pkg:golang/net/url`Other threats	Affected =1.25.0	Fixed in–
Gonet/url`pkg:golang/net/url`Other threats	Affected <1.24.12 >=1.25.0 <1.25.6	Fixed in 1.24.12 1.25.6

Check your own hosts for these packages with threat-finder (opens in a new tab), our free open-source scanner.

Description

A local binary for building customized OS artifacts such as VM images and OSTree commits. Uses osbuild under the hood. Security Fix(es): * golang: net/url: Memory exhaustion in query parameter parsing in net/url (CVE-2025-61726) * crypto/tls: Unexpected session resumption in crypto/tls (CVE-2025-68121) * crypto/x509: Incorrect enforcement of email constraints in crypto/x509 (CVE-2026-27137) * net/url: Incorrect parsing of IPv6 host literals in net/url (CVE-2026-25679) * google.golang.org/grpc/grpc-go: google.golang.org/grpc/authz: gRPC-Go: Authorization bypass due to improper HTTP/2 path validation (CVE-2026-33186) * github.com/go-jose/go-jose/v3: github.com/go-jose/go-jose/v4: Go JOSE: Denial of Service via crafted JSON Web Encryption (JWE) object (CVE-2026-34986) * golang: internal/syscall/unix: Root.Chmod can follow symlinks out of the root (CVE-2026-32282) * crypto/tls: golang: Go crypto/tls: Denial of Service via multiple TLS 1.3 key update messages (CVE-2026-32283) For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.

CWE-770Allocation of Resources Without Limits or Throttling (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #25
The product allocates a reusable resource or group of resources on behalf of an actor without imposing any intended restrictions on the size or number of resources that can be allocated.
Requirements
Clearly specify the minimum and maximum expectations for capabilities, and dictate which behaviors are acceptable when resource allocation reaches limits.
Architecture and Design
Limit the amount of resources that are accessible to unprivileged users. Set per-user limits for resources. Allow the system administrator to define these limits. Be careful to avoid CWE-410.
Architecture and Design
Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended.
OWASP Cheat Sheets
Abuse Case (opens in a new tab)
OWASP ASVS 4.0.3
V8.1.4 (opens in a new tab)
V13.4.1 (opens in a new tab)
V11.1.4 (opens in a new tab)
Attack patterns
XML Ping of the Death (opens in a new tab)
Exponential Data Expansion (opens in a new tab)
Serialized Data Parameter Blowup (opens in a new tab)
Serialized Data with Nested Payloads (opens in a new tab)
Oversized Serialized Data Payloads (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-295Improper Certificate Validation (opens in a new tab)
Base weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
The product does not validate, or incorrectly validates, a certificate.
Architecture and Design · Implementation
Certificates should be carefully managed and checked to assure that data are encrypted with the intended owner's public key.
Implementation
If certificate pinning is being used, ensure that all relevant properties of the certificate are fully validated before the certificate is pinned, including the hostname.
OWASP Cheat Sheets
Transport Layer Protection (opens in a new tab)
TLS Cipher String (opens in a new tab)
OWASP Authentication (opens in a new tab)
OWASP ASVS 4.0.3
V9.2.1 (opens in a new tab)
V1.9.2 (opens in a new tab)
V2.8.5 (opens in a new tab)
Attack patterns
Creating a Rogue Certification Authority Certificate (opens in a new tab)
Signature Spoofing by Improper Validation (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-1286Improper Validation of Syntactic Correctness of Input (opens in a new tab)
Base weakness
The product receives input that is expected to be well-formed - i.e., to comply with a certain syntax - but it does not validate or incorrectly validates that the input complies with the syntax.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
Attack patterns
SQL Injection (opens in a new tab)
NoSQL Injection (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-367Time-of-check Time-of-use (TOCTOU) Race Condition (opens in a new tab)
Base weaknessLikelihood of exploit: Medium
The product checks the state of a resource before using that resource, but the resource's state can change between the check and the use in a way that invalidates the results of the check.
Implementation
The most basic advice for TOCTOU vulnerabilities is to not perform a check before the use. This does not resolve the underlying issue of the execution of a function on a resource whose state and identity cannot be assured, but it does help to limit the false sense of security given by the check.
Implementation
When the file being altered is owned by the current user and group, set the effective gid and uid to that of the current user and group when executing this statement.
Architecture and Design
Limit the interleaving of operations on files from multiple processes.
OWASP Cheat Sheets
Abuse Case (opens in a new tab)
OWASP ASVS 4.0.3
V1.11.3 (opens in a new tab)
V11.1.6 (opens in a new tab)
V1.11.2 (opens in a new tab)
Attack patterns
Leveraging Race Conditions via Symbolic Links (opens in a new tab)
Leveraging Time-of-Check and Time-of-Use (TOCTOU) Race Conditions (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-764Multiple Locks of a Critical Resource (opens in a new tab)
Base weakness
The product locks a critical resource more times than intended, leading to an unexpected state in the system.
Implementation
When locking and unlocking a resource, try to be sure that all control paths through the code in which the resource is locked one or more times correspond to exactly as many unlocks.
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-551Incorrect Behavior Order: Authorization Before Parsing and Canonicalization (opens in a new tab)
Base weakness
If a web server does not fully parse requested URLs before it examines them for authorization, it may be possible for an attacker to bypass authorization protection.
Architecture and Design
URL Inputs should be decoded and canonicalized to the application's current internal representation before being validated and processed for authorization. Make sure that your application does not decode the same input twice.
OWASP ASVS 4.0.3
V8.3.8 (opens in a new tab)
V13.4.2 (opens in a new tab)
V7.2.2 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-131Incorrect Calculation of Buffer Size (opens in a new tab)
Base weaknessLikelihood of exploit: High
The product does not correctly calculate the size to be used when allocating a buffer, which could lead to a buffer overflow.
Implementation
When allocating a buffer for the purpose of transforming, converting, or encoding an input, allocate enough memory to handle the largest possible encoding. For example, in a routine that converts "&" characters to "&" for HTML entity encoding, the output buffer needs to be at least 5 times as large as the input…
Implementation
Understand the programming language's underlying representation and how it interacts with numeric calculation (CWE-681). Pay close attention to byte size discrepancies, precision, signed/unsigned distinctions, truncation, conversion and casting between types, "not-a-number" calculations, and how the language handles…
Implementation · Input Validation
Perform input validation on any numeric input by ensuring that it is within the expected range. Enforce that the input meets both the minimum and maximum requirements for the expected range.
Attack patterns
Overflow Buffers (opens in a new tab)
Buffer Overflow via Parameter Expansion (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Affected software

Description

WeaknessesCWE-770, CWE-295, CWE-1286 +4

Technical details

References

Community reviews

Related threats