CVE-2025-4877VulnerabilityPublished 19 May 2026Updated 16 Oct 2026

Red Hat Security Advisory: libssh security update

Affects Red Hat libsshSource GCVE Database

Mentioned vulnerabilities

Authoritative record:CVE-2025-4877· Medium 4.5

Not known to be exploited · CVSS 4.5 Medium · patch available : update Red Hat libssh when convenient.

Data as of 26 Oct 2026, 12:55 UTC

CVSS 3.1 base score

4.5Medium

How severe the flaw is on the 0–10 CVSS scale.

EPSS: 0.2% chance of exploitation in 30 days – higher than 10% of CVEsExploit Prediction Scoring System: the likelihood attackers will use this flaw soon.
Patch: Available

CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:L/I:L/A:L

Attack Vector: Local
Attack Complexity: High
Privileges Required: Low
User Interaction: None
Scope: Unchanged
Confidentiality: Low
Integrity: Low
Availability: Low

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Local: The vulnerable component is not bound to the network stack and the attacker’s path is via read/write/execute capabilities. Either: the attacker exploits the vulnerability by accessing the target system locally (e.g., keyboard, console), or remotely (e.g., SSH); or the attacker relies on User Interaction by another person to perform actions required to exploit the vulnerability (e.g., tricking a legitimate user into opening a malicious document).
Attack Complexity: High: A successful attack depends on conditions beyond the attacker's control. That is, a successful attack cannot be accomplished at will, but requires the attacker to invest in some measurable amount of effort in preparation or execution against the vulnerable component before a successful attack can be expected. For example, a successful attack may require an attacker to: gather knowledge about the environment in which the vulnerable target/component exists; prepare the target environment to improve exploit reliability; or inject themselves into the logical network path between the target and the resource requested by the victim in order to read and/or modify network communications (e.g., a man in the middle attack).
Privileges Required: Low: The attacker is authorized with (i.e., requires) privileges that provide basic user capabilities that could normally affect only settings and files owned by a user. Alternatively, an attacker with Low privileges may have the ability to cause an impact only to non-sensitive resources.
User Interaction: None: The vulnerable system can be exploited without any interaction from any user.
Scope: Unchanged: An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
Confidentiality: Low: There is some loss of confidentiality. Access to some restricted information is obtained, but the attacker does not have control over what information is obtained, or the amount or kind of loss is limited. The information disclosure does not cause a direct, serious loss to the impacted component.
Integrity: Low: Modification of data is possible, but the attacker does not have control over the consequence of a modification, or the amount of modification is limited. The data modification does not have a direct, serious impact on the impacted component.
Availability: Low: Performance is reduced or there are interruptions in resource availability. Even if repeated exploitation of the vulnerability is possible, the attacker does not have the ability to completely deny service to legitimate users. The resources in the impacted component are either partially available all of the time, or fully available only some of the time, but overall there is no direct, serious consequence to the impacted component.

Definitions: FIRST CVSS v3.1 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 20 Aug 2025
Detectable: no evidence on record.
No public nuclei template indexed
Weaponised: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 26 Oct 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponised: Public exploit code exists in Metasploit or Exploit-DB, or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

Description

libssh is a library which implements the SSH protocol. It can be used to implement client and server applications. Security Fix(es): * libssh: Double Free Vulnerability in libssh Key Export Functions (CVE-2025-5351) * libssh: Use of uninitialized variable in privatekey_from_file() (CVE-2025-4878) * libssh: Write beyond bounds in binary to base64 conversion functions (CVE-2025-4877) * libssh: NULL Pointer Dereference in libssh KEX Session ID Calculation (CVE-2025-8114) * libssh: Memory Exhaustion via Repeated Key Exchange in libssh (CVE-2025-8277) * libssh: Buffer underflow in ssh_get_hexa() on invalid input (CVE-2026-0966) * libssh: Improper sanitation of paths received from SCP servers (CVE-2026-0964) * libssh: libssh: Denial of Service via improper configuration file handling (CVE-2026-0965) * libssh: libssh: Denial of Service via inefficient regular expression processing (CVE-2026-0967) * libssh: libssh: Denial of Service due to malformed SFTP message (CVE-2026-0968) For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section. Additional Changes: For detailed information on changes in this release, see the Red Hat Enterprise Linux 9 Release Notes linked from the References section.

CWE-787Out-of-bounds Write (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #5
The product writes data past the end, or before the beginning, of the intended buffer.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Operation · Build and Compilation · Environment Hardening
Use automatic buffer overflow detection mechanisms that are offered by certain compilers or compiler extensions. Examples include: the Microsoft Visual Studio /GS flag, Fedora/Red Hat FORTIFY_SOURCE GCC flag, StackGuard, and ProPolice, which provide various mechanisms including canary-based detection and range/index…
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-416Use After Free (opens in a new tab)
Variant weaknessLikelihood of exploit: HighCWE Top 25 (2025): #7
The product reuses or references memory after it has been freed. At some point afterward, the memory may be allocated again and saved in another pointer, while the original pointer references a location somewhere within the new allocation. Any operations using the original pointer are no longer valid because the memory "belongs" to the code that operates on the new pointer.
Architecture and Design · Language Selection
Choose a language that provides automatic memory management.
Implementation · Attack Surface Reduction
When freeing pointers, be sure to set them to NULL once they are freed. However, the utilization of multiple or complex data structures may lower the usefulness of this strategy.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-415Double Free (opens in a new tab)
Variant weaknessLikelihood of exploit: High
The product calls free() twice on the same memory address.
Architecture and Design
Choose a language that provides automatic memory management.
Implementation
Ensure that each allocation is freed only once. After freeing a chunk, set the pointer to NULL to ensure the pointer cannot be freed again. In complicated error conditions, be sure that clean-up routines respect the state of allocation properly.
Implementation
Use a static analysis tool to find double free instances.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-476NULL Pointer Dereference (opens in a new tab)
Base weaknessLikelihood of exploit: MediumCWE Top 25 (2025): #13OWASP Top 10 A10:2025: Mishandling of Exceptional Conditions (opens in a new tab)
The product dereferences a pointer that it expects to be valid but is NULL.
Implementation
For any pointers that could have been modified or provided from a function that can return NULL, check the pointer for NULL before use. When working with a multithreaded or otherwise asynchronous environment, ensure that proper locking APIs are used to lock before the check, and unlock when it has finished.
Requirements
Select a programming language that is not susceptible to these issues.
Implementation
Check the results of all functions that return a value and verify that the value is non-null before acting upon it.
OWASP Cheat Sheets
Logging (opens in a new tab)
Error Handling (opens in a new tab)
OWASP ASVS 4.0.3
V11.1.7 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-401Missing Release of Memory after Effective Lifetime (opens in a new tab)
Variant weaknessLikelihood of exploit: Medium
The product does not sufficiently track and release allocated memory after it has been used, making the memory unavailable for reallocation and reuse.
Implementation · Libraries or Frameworks
Choose a language or tool that provides automatic memory management, or makes manual memory management less error-prone.
Architecture and Design
Use an abstraction library to abstract away risky APIs. Not a complete solution.
Architecture and Design · Build and Compilation
Consider using the Boehm-Demers-Weiser garbage collector (bdwgc), which can help avoid leaks.
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-22Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #6OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product uses external input to construct a pathname that is intended to identify a file or directory that is located underneath a restricted parent directory, but the product does not properly neutralize special elements within the pathname that can cause the pathname to resolve to a location that is outside of the restricted directory.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Architecture and Design
For any security checks that are performed on the client side, ensure that these checks are duplicated on the server side, in order to avoid CWE-602. Attackers can bypass the client-side checks by modifying values after the checks have been performed, or by changing the client to remove the client-side checks…
Implementation · Input Validation
Inputs should be decoded and canonicalized to the application's current internal representation before being validated (CWE-180). Make sure that the application does not decode the same input twice (CWE-174).
OWASP Cheat Sheets
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V12.3.1 (opens in a new tab)
Attack patterns
Path Traversal (opens in a new tab)
Using Slashes and URL Encoding Combined to Bypass Validation Logic (opens in a new tab)
Manipulating Web Input to File System Calls (opens in a new tab)
Using Escaped Slashes in Alternate Encoding (opens in a new tab)
Using Slashes in Alternate Encoding (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-73External Control of File Name or Path (opens in a new tab)
Base weaknessLikelihood of exploit: HighOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The product allows user input to control or influence paths or file names that are used in filesystem operations.
Architecture and Design
When the set of filenames is limited or known, create a mapping from a set of fixed input values (such as numeric IDs) to the actual filenames, and reject all other inputs. For example, ID 1 could map to "inbox.txt" and ID 2 could map to "profile.txt".
Architecture and Design · Operation
Run your code in a "jail" or similar sandbox environment that enforces strict boundaries between the process and the operating system. This may effectively restrict all access to files within a particular directory.
Architecture and Design
For any security checks that are performed on the client side, ensure that these checks are duplicated on the server side, in order to avoid CWE-602. Attackers can bypass the client-side checks by modifying values after the checks have been performed, or by changing the client to remove the client-side checks…
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
Secure Design Principles (opens in a new tab)
OWASP ASVS 4.0.3
V12.3.2 (opens in a new tab)
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
Attack patterns
Subverting Environment Variable Values (opens in a new tab)
Leverage Alternate Encoding (opens in a new tab)
Using Slashes and URL Encoding Combined to Bypass Validation Logic (opens in a new tab)
URL Encoding (opens in a new tab)
Manipulating Web Input to File System Calls (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-124Buffer Underwrite ('Buffer Underflow') (opens in a new tab)
Base weaknessLikelihood of exploit: Medium
The product writes to a buffer using an index or pointer that references a memory location prior to the beginning of the buffer.
Requirements
Choose a language that is not susceptible to these issues.
Implementation
All calculated values that are used as index or for pointer arithmetic should be validated to ensure that they are within an expected range.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-1333Inefficient Regular Expression Complexity (opens in a new tab)
Base weaknessLikelihood of exploit: High
The product uses a regular expression with a worst-case computational complexity that is inefficient and possibly exponential.
Architecture and Design
Use regular expressions that do not support backtracking, e.g. by removing nested quantifiers.
System Configuration
Set backtracking limits in the configuration of the regular expression implementation, such as PHP's pcre.backtrack_limit. Also consider limits on execution time for the process.
Implementation
Do not use regular expressions with untrusted input. If regular expressions must be used, avoid using backtracking in the expression.
OWASP Cheat Sheets
File Upload (opens in a new tab)
OWASP ASVS 4.0.3
V12.1.1 (opens in a new tab)
Attack patterns
Regular Expression Exponential Blowup (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

References

Community reviews

Loading reviews…

Exploitation evidence

Description

WeaknessesCWE-787, CWE-416, CWE-415 +6

Technical details

References

Community reviews

Related threats