CVE-2026-25681VulnerabilityPublished 12 Nov 2026

Red Hat Security Advisory: multicluster engine for Kubernetes v2.9.9 security update

Affects Red HatSource GCVE Database

Compare

Authoritative record:CVE-2026-25681· Medium 6.1

Not known to be exploited · CVSS 6.1 Medium : upgrade Red Hat html to 0.55.0 when convenient.

Data as of 13 Nov 2026, 14:35 UTC

CVSS 3.1 base score

6.1Medium

How severe the flaw is on the 0–10 CVSS scale.

Patch: Available – fixed in 0.55.0

CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N

Attack Vector: Network
Attack Complexity: Low
Privileges Required: None
User Interaction: Required
Scope: Changed
Confidentiality: Low
Integrity: Low
Availability: None

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable component is bound to the network stack and the set of possible attackers extends beyond the other options listed, up to and including the entire Internet. Such a vulnerability is often termed 'remotely exploitable' and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: Low: Specialized access conditions or extenuating circumstances do not exist. An attacker can expect repeatable success against the vulnerable component.
Privileges Required: None: The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files to carry out an attack.
User Interaction: Required: Successful exploitation of this vulnerability requires a user to take some action before the vulnerability can be exploited.
Scope: Changed: An exploited vulnerability can affect resources beyond the security scope managed by the security authority of the vulnerable component. In this case, the vulnerable component and the impacted component are different and managed by different security authorities.
Confidentiality: Low: There is some loss of confidentiality. Access to some restricted information is obtained, but the attacker does not have control over what information is obtained, or the amount or kind of loss is limited. The information disclosure does not cause a direct, serious loss to the impacted component.
Integrity: Low: Modification of data is possible, but the attacker does not have control over the consequence of a modification, or the amount of modification is limited. The data modification does not have a direct, serious impact on the impacted component.
Availability: None: There is no impact to availability within the impacted component.

Definitions: FIRST CVSS v3.1 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 22 May 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponized: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 13 Nov 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponized: A Metasploit exploit module or Exploit-DB entry exists (Metasploit scanner modules do not count), or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

Upgrade golang.org/x/net/html to 0.55.0.

Affected software

Product	Affected	Fixed in
golang.org/x/netgolang.org/x/net/html	Affected <0.55.0	Fixed in 0.55.0
Gogolang.org/x/net/html`pkg:golang/golang.org/x/net/html`Other threats	Affected =0	Fixed in–
Gogolang.org/x/net/html`pkg:golang/golang.org/x/net/html`Other threats	Affected <0.55.0	Fixed in 0.55.0

Check your own hosts for these packages with threat-finder (opens in a new tab), our free open-source scanner.

AI-suggested

Red Hat has released updated images for the multicluster engine for Kubernetes v2.9.9 that include security fixes. Users should apply these updates by following the installation instructions provided in the official Red Hat documentation: https://access.redhat.com/documentation/en-us/red_hat_advanced_cluster_management_for_kubernetes/2.14/html/clusters/cluster_mce_overview#mce-install-intro. No additional mitigation steps are indicated in the advisory.

Description

Red Hat has issued a security advisory for the multicluster engine for Kubernetes, addressing multiple vulnerabilities in the v2.9.9 release. The multicluster engine enables centralized management of multiple Kubernetes clusters across various environments. This update includes security fixes and updated container images to mitigate identified issues. The vulnerabilities have been rated with an overall security impact of Important (high severity).

Impact

The vulnerabilities in the multicluster engine for Kubernetes could potentially allow attackers to compromise the centralized management of Kubernetes clusters, affecting configuration distribution and cluster operations. The security impact is rated as Important (high severity) by Red Hat Product Security. There are no known exploits in the wild at this time.

Summary

The multicluster engine for Kubernetes provides foundational components for centralized management of multiple Kubernetes-based clusters across data centers, public clouds, and private clouds. The Red Hat security advisory RHSA-2026:99958 for version 2.9.9 addresses multiple security vulnerabilities (including CVE-2026-25681 and others) by providing updated container images and security fixes. The advisory does not specify exact fixed versions but directs users to updated images and installation documentation. The vulnerabilities affect the management and configuration distribution APIs of the engine, which are critical for cluster operations.

CWE-79Improper Neutralization of Input During Web Page Generation (Cross-site Scripting) (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #1OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product does not neutralize or incorrectly neutralizes user-controllable input before it is placed in output that is used as a web page that is served to other users.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Implementation · Architecture and Design
Understand the context in which your data will be used and the encoding that will be expected. This is especially important when transmitting data between different components, or when generating outputs that can contain multiple encodings at the same time, such as web pages or multi-part mail messages.
Architecture and Design · Implementation · Attack Surface Reduction
Understand all the potential areas where untrusted inputs can enter your software: parameters or arguments, cookies, anything read from the network, environment variables, reverse DNS lookups, query results, request headers, URL components, e-mail, files, filenames, databases, and any external systems that provide…
OWASP Cheat Sheets
Cross Site Scripting Prevention (opens in a new tab)
DOM based XSS Prevention (opens in a new tab)
Injection Prevention (opens in a new tab)
Abuse Case (opens in a new tab)
Deserialization (opens in a new tab)
OWASP ASVS 4.0.3
V5.3.3 (opens in a new tab)
V1.5.1 (opens in a new tab)
Attack patterns
XSS Using MIME Type Mismatch (opens in a new tab)
DOM-Based XSS (opens in a new tab)
Reflected XSS (opens in a new tab)
Stored XSS (opens in a new tab)
Cross-Site Scripting (XSS) (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-1289Improper Validation of Unsafe Equivalence in Input (opens in a new tab)
Base weakness
The product receives an input value that is used as a resource identifier or other type of reference, but it does not validate or incorrectly validates that the input is equivalent to a potentially-unsafe value.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-59Improper Link Resolution Before File Access (Link Following) (opens in a new tab)
Base weaknessLikelihood of exploit: MediumOWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product attempts to access a file based on the filename, but it does not properly prevent that filename from identifying a link or shortcut that resolves to an unintended resource.
Architecture and Design · Separation of Privilege
Follow the principle of least privilege when assigning access rights to entities in a software system.
OWASP Cheat Sheets
Authorization (opens in a new tab)
Attack patterns
Symlink Attack (opens in a new tab)
Using Malicious Files (opens in a new tab)
Leverage Executable Code in Non-Executable Files (opens in a new tab)
Manipulating Web Input to File System Calls (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-190Integer Overflow or Wraparound (opens in a new tab)
Base weaknessLikelihood of exploit: Medium
The product performs a calculation that can produce an integer overflow or wraparound when the logic assumes that the resulting value will always be larger than the original value. This occurs when an integer value is incremented to a value that is too large to store in the associated representation. When this occurs, the value may become a very small or negative number.
Requirements
Ensure that all protocols are strictly defined, such that all out-of-bounds behavior can be identified simply, and require strict conformance to the protocol.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V5.4.3 (opens in a new tab)
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
Attack patterns
Forced Integer Overflow (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-770Allocation of Resources Without Limits or Throttling (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #25
The product allocates a reusable resource or group of resources on behalf of an actor without imposing any intended restrictions on the size or number of resources that can be allocated.
Requirements
Clearly specify the minimum and maximum expectations for capabilities, and dictate which behaviors are acceptable when resource allocation reaches limits.
Architecture and Design
Limit the amount of resources that are accessible to unprivileged users. Set per-user limits for resources. Allow the system administrator to define these limits. Be careful to avoid CWE-410.
Architecture and Design
Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended.
OWASP Cheat Sheets
Abuse Case (opens in a new tab)
OWASP ASVS 4.0.3
V8.1.4 (opens in a new tab)
V13.4.1 (opens in a new tab)
V11.1.4 (opens in a new tab)
Attack patterns
XML Ping of the Death (opens in a new tab)
Exponential Data Expansion (opens in a new tab)
Serialized Data Parameter Blowup (opens in a new tab)
Serialized Data with Nested Payloads (opens in a new tab)
Oversized Serialized Data Payloads (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-776Improper Restriction of Recursive Entity References in DTDs (Billion Laughs Attack) (opens in a new tab)
Base weaknessLikelihood of exploit: MediumOWASP Top 10 A02:2025: Security Misconfiguration (opens in a new tab)
The product uses XML documents and allows their structure to be defined with a Document Type Definition (DTD), but it does not properly control the number of recursive definitions of entities.
Operation
If possible, prohibit the use of DTDs or use an XML parser that limits the expansion of recursive DTD entities.
Implementation
Before parsing XML files with associated DTDs, scan for recursive entity declarations and do not continue parsing potentially explosive content.
OWASP Cheat Sheets
File Upload (opens in a new tab)
OWASP ASVS 4.0.3
V12.1.1 (opens in a new tab)
Attack patterns
Exponential Data Expansion (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-1050Excessive Platform Resource Consumption within a Loop (opens in a new tab)
Base weakness
The product has a loop body or loop condition that contains a control element that directly or indirectly consumes platform resources, e.g. messaging, sessions, locks, or file descriptors.
OWASP Cheat Sheets
File Upload (opens in a new tab)
OWASP ASVS 4.0.3
V12.1.1 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-494Download of Code Without Integrity Check (opens in a new tab)
Base weaknessLikelihood of exploit: MediumOWASP Top 10 A08:2025: Software or Data Integrity Failures (opens in a new tab)
The product downloads source code or an executable from a remote location and executes the code without sufficiently verifying the origin and integrity of the code.
Implementation
Perform proper forward and reverse DNS lookups to detect DNS spoofing.
Architecture and Design · Operation
Encrypt the code with a reliable encryption scheme before transmitting.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
OWASP Cheat Sheets
Docker Security (opens in a new tab)
XML Security (opens in a new tab)
Software Supply Chain Security (opens in a new tab)
Infrastructure as Code (opens in a new tab)
OWASP ASVS 4.0.3
V1.14.2 (opens in a new tab)
V10.3.1 (opens in a new tab)
V13.3.2 (opens in a new tab)
Attack patterns
Malicious Software Download (opens in a new tab)
Malicious Software Update (opens in a new tab)
Malicious Automated Software Update via Redirection (opens in a new tab)
Malicious Manual Software Update (opens in a new tab)
Open-Source Library Manipulation (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-347Improper Verification of Cryptographic Signature (opens in a new tab)
Base weaknessOWASP Top 10 A04:2025: Cryptographic Failures (opens in a new tab)
The product does not verify, or incorrectly verifies, the cryptographic signature for data.
OWASP Cheat Sheets
XML Security (opens in a new tab)
REST Security (opens in a new tab)
JSON Web Token for Java (opens in a new tab)
REST Assessment (opens in a new tab)
Cross-Site Request Forgery Prevention (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.2 (opens in a new tab)
V3.5.3 (opens in a new tab)
V13.2.6 (opens in a new tab)
Attack patterns
Padding Oracle Crypto Attack (opens in a new tab)
Signature Spoofing by Improper Validation (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-823Use of Out-of-range Pointer Offset (opens in a new tab)
Base weakness
The product performs pointer arithmetic on a valid pointer, but it uses an offset that can point outside of the intended range of valid memory locations for the resulting pointer.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
Attack patterns
Pointer Manipulation (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-524Use of Cache Containing Sensitive Information (opens in a new tab)
Base weakness
The code uses a cache that contains sensitive information, but the cache can be read by an actor outside of the intended control sphere.
Architecture and Design
Protect information stored in cache.
Architecture and Design
Do not store unnecessarily sensitive information in the cache.
Architecture and Design
Consider using encryption in the cache.
OWASP ASVS 4.0.3
V8.1.1 (opens in a new tab)
V8.1.2 (opens in a new tab)
Attack patterns
Lifting Sensitive Data Embedded in Cache (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-184Incomplete List of Disallowed Inputs (opens in a new tab)
Base weaknessOWASP Top 10 A03:2021: Injection (opens in a new tab)
The product implements a protection mechanism that relies on a list of inputs (or properties of inputs) that are not allowed by policy or otherwise require other action to neutralize before additional processing takes place, but the list is incomplete.
Implementation · Input Validation
Do not rely exclusively on detecting disallowed inputs. There are too many variants to encode a character, especially when different environments are used, so there is a high likelihood of missing some variants. Only use detection of disallowed inputs as a mechanism for detecting suspicious activity.
Attack patterns
Double Encoding (opens in a new tab)
Command Delimiters (opens in a new tab)
Flash Injection (opens in a new tab)
Using Leading 'Ghost' Character Sequences to Bypass Input Filters (opens in a new tab)
Exploiting Multiple Input Interpretation Layers (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-94Improper Control of Generation of Code (Code Injection) (opens in a new tab)
Base weaknessLikelihood of exploit: MediumCWE Top 25 (2025): #10OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product constructs all or part of a code segment using externally-influenced input from an upstream component, but it does not neutralize or incorrectly neutralizes special elements that could modify the syntax or behavior of the intended code segment.
Architecture and Design · Refactoring
Refactor your program so that you do not have to dynamically generate code.
Architecture and Design
Run your code in a "jail" or similar sandbox environment that enforces strict boundaries between the process and the operating system. This may effectively restrict which code can be executed by your product.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
OWASP Cheat Sheets
Server Side Request Forgery Prevention (opens in a new tab)
Unvalidated Redirects and Forwards (opens in a new tab)
Cross Site Scripting Prevention (opens in a new tab)
DOM based XSS Prevention (opens in a new tab)
Abuse Case (opens in a new tab)
OWASP ASVS 4.0.3
V5.2.8 (opens in a new tab)
V5.2.5 (opens in a new tab)
V1.5.1 (opens in a new tab)
Attack patterns
Leverage Executable Code in Non-Executable Files (opens in a new tab)
Manipulating User-Controlled Variables (opens in a new tab)
Code Injection (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-125Out-of-bounds Read (opens in a new tab)
Base weaknessCWE Top 25 (2025): #8
The product reads data past the end, or before the beginning, of the intended buffer.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Architecture and Design · Language Selection
Use a language that provides appropriate memory abstractions.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
Attack patterns
Overread Buffers (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

GCVE source: db.gcve.eu
Csaf Category: csaf_security_advisory
Csaf Version: 2.0
Publisher: Red Hat Product Security
Advisory ID: RHSA-2026:99958
Vendor Severity: high
CVE Count: 19
Additional Cves: CVE-2026-27136, CVE-2026-39821, CVE-2026-39822, CVE-2026-39834, CVE-2026-41178, CVE-2026-56853, CVE-2026-56858, CVE-2026-56859, CVE-2026-56860, CVE-2026-56862, CVE-2026-56864, CVE-2026-56865, CVE-2026-63209, CVE-2026-84304, CVE-2026-93748, CVE-2026-106445, CVE-2026-106446, CVE-2026-116591

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Affected software

Description

AI analysisMachine-generated, updated 13 Nov 2026, 14:35 UTC

WeaknessesCWE-79, CWE-1289, CWE-59 +11

Technical details

References

Community reviews

Related threats