CVE-2024-55565VulnerabilityPublished 16 Jun 2026Updated 30 Oct 2026

Red Hat Security Advisory: New container image: rhceph-9.0

Affects Red HatSource GCVE Database

Compare

Authoritative record:CVE-2024-55565· Medium 4.3

Not known to be exploited · CVSS 4.3 Medium.

Data as of 30 Oct 2026, 11:52 UTC

CVSS 3.1 base score

4.3Medium

How severe the flaw is on the 0–10 CVSS scale.

EPSS: 0.6% chance of exploitation in 30 days – higher than 51% of CVEsExploit Prediction Scoring System: the likelihood attackers will use this flaw soon.

CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N

Attack Vector: Network
Attack Complexity: Low
Privileges Required: Low
User Interaction: None
Scope: Unchanged
Confidentiality: None
Integrity: Low
Availability: None

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable component is bound to the network stack and the set of possible attackers extends beyond the other options listed, up to and including the entire Internet. Such a vulnerability is often termed 'remotely exploitable' and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: Low: Specialized access conditions or extenuating circumstances do not exist. An attacker can expect repeatable success against the vulnerable component.
Privileges Required: Low: The attacker is authorized with (i.e., requires) privileges that provide basic user capabilities that could normally affect only settings and files owned by a user. Alternatively, an attacker with Low privileges may have the ability to cause an impact only to non-sensitive resources.
User Interaction: None: The vulnerable system can be exploited without any interaction from any user.
Scope: Unchanged: An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
Confidentiality: None: There is no loss of confidentiality within the impacted component.
Integrity: Low: Modification of data is possible, but the attacker does not have control over the consequence of a modification, or the amount of modification is limited. The data modification does not have a direct, serious impact on the impacted component.
Availability: None: There is no impact to availability within the impacted component.

Definitions: FIRST CVSS v3.1 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 9 Dec 2024
Detectable: no evidence on record.
No public nuclei template indexed
Weaponized: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 30 Oct 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponized: A Metasploit exploit module or Exploit-DB entry exists (Metasploit scanner modules do not count), or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

AI-suggested

No mitigation that meets Red Hat's criteria for ease of use, applicability, and stability is currently available. Red Hat is pursuing fixes for affected mappings. Users should monitor Red Hat advisories for updates and consider upgrading to fixed versions once available. The new rhceph-9.0 container image is available but does not explicitly address this vulnerability.

Description

A vulnerability (CVE-2024-55565) was found in the nanoid library used in Red Hat products including Red Hat Ceph Storage. The flaw causes improper handling of fractional (non-integer) input values, leading to infinite loops in browser environments and zeroed output or buffer allocation failures in Node.js. This can impair system availability. Red Hat rates the impact as moderate with a CVSS score of 6.5, primarily affecting availability. A new container image rhceph-9.0 based on Ceph 9.0 and ubi9 base image has been released, but no specific fix for this vulnerability is currently provided in the advisory.

Impact

The vulnerability can cause system availability issues due to infinite loops or failed buffer allocations when nanoid is called with fractional values. There is no impact on confidentiality or integrity. Red Hat rates the impact as moderate with a CVSS 3.1 score of 6.5 (AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H). No known exploits in the wild have been reported.

Summary

The vulnerability CVE-2024-55565 affects the nanoid library when called with fractional size arguments. In browser and non-secure environments, this causes infinite loops due to a loop with an unreachable exit condition. In Node.js, fractional values cause the pool offset to become fractional, resulting in calls returning zeroes until the pool is refilled, and initial fractional calls can fail buffer allocation. This behavior impacts system availability. Red Hat products including middleware, Ansible, OpenShift, Enterprise Linux, and Ceph mappings are affected. The Red Hat advisory for the new rhceph-9.0 container image mentions the update to Ceph 9.0 but does not indicate a fix for this vulnerability. No mitigation meeting Red Hat's criteria is currently available, and remediation is being pursued for some affected mappings.

CWE-835Loop with Unreachable Exit Condition (Infinite Loop) (opens in a new tab)
Base weakness
The product contains an iteration or loop with an exit condition that cannot be reached, i.e., an infinite loop.
CWE-241Improper Handling of Unexpected Data Type (opens in a new tab)
Base weakness
The product does not handle or incorrectly handles when a particular element is not the expected type, e.g. it expects a digit (0-9) but is provided with a letter (A-Z).
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Implementation · Input Validation
Inputs should be decoded and canonicalized to the application's current internal representation before being validated (CWE-180). Make sure that the application does not decode the same input twice (CWE-174).
OWASP Cheat Sheets
Abuse Case (opens in a new tab)
Deserialization (opens in a new tab)
OWASP ASVS 4.0.3
V1.5.1 (opens in a new tab)
Attack patterns
Passing Local Filenames to Functions That Expect a URL (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-125Out-of-bounds Read (opens in a new tab)
Base weaknessCWE Top 25 (2025): #8
The product reads data past the end, or before the beginning, of the intended buffer.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Architecture and Design · Language Selection
Use a language that provides appropriate memory abstractions.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
Attack patterns
Overread Buffers (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-770Allocation of Resources Without Limits or Throttling (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #25
The product allocates a reusable resource or group of resources on behalf of an actor without imposing any intended restrictions on the size or number of resources that can be allocated.
Requirements
Clearly specify the minimum and maximum expectations for capabilities, and dictate which behaviors are acceptable when resource allocation reaches limits.
Architecture and Design
Limit the amount of resources that are accessible to unprivileged users. Set per-user limits for resources. Allow the system administrator to define these limits. Be careful to avoid CWE-410.
Architecture and Design
Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended.
OWASP Cheat Sheets
Abuse Case (opens in a new tab)
OWASP ASVS 4.0.3
V8.1.4 (opens in a new tab)
V13.4.1 (opens in a new tab)
V11.1.4 (opens in a new tab)
Attack patterns
XML Ping of the Death (opens in a new tab)
Exponential Data Expansion (opens in a new tab)
Serialized Data Parameter Blowup (opens in a new tab)
Serialized Data with Nested Payloads (opens in a new tab)
Oversized Serialized Data Payloads (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-22Improper Limitation of a Pathname to a Restricted Directory (Path Traversal) (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #6OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product uses external input to construct a pathname that is intended to identify a file or directory that is located underneath a restricted parent directory, but the product does not properly neutralize special elements within the pathname that can cause the pathname to resolve to a location that is outside of the restricted directory.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Architecture and Design
For any security checks that are performed on the client side, ensure that these checks are duplicated on the server side, in order to avoid CWE-602. Attackers can bypass the client-side checks by modifying values after the checks have been performed, or by changing the client to remove the client-side checks…
Implementation · Input Validation
Inputs should be decoded and canonicalized to the application's current internal representation before being validated (CWE-180). Make sure that the application does not decode the same input twice (CWE-174).
OWASP Cheat Sheets
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V12.3.1 (opens in a new tab)
Attack patterns
Path Traversal (opens in a new tab)
Using Slashes and URL Encoding Combined to Bypass Validation Logic (opens in a new tab)
Manipulating Web Input to File System Calls (opens in a new tab)
Using Escaped Slashes in Alternate Encoding (opens in a new tab)
Using Slashes in Alternate Encoding (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-1321Improperly Controlled Modification of Object Prototype Attributes (Prototype Pollution) (opens in a new tab)
Variant weakness
The product receives input from an upstream component that specifies attributes that are to be initialized or updated in an object, but it does not properly control modifications of attributes of the object prototype.
Implementation
By freezing the object prototype first (for example, Object.freeze(Object.prototype)), modification of the prototype becomes impossible.
Architecture and Design
By blocking modifications of attributes that resolve to object prototype, such as proto or prototype, this weakness can be mitigated.
Implementation · Input Validation
When handling untrusted objects, validating using a schema can be used.
OWASP Cheat Sheets
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V5.1.2 (opens in a new tab)
Attack patterns
Accessing Functionality Not Properly Constrained by ACLs (opens in a new tab)
Exploiting Incorrectly Configured Access Control Security Levels (opens in a new tab)
Manipulating User-Controlled Variables (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-78Improper Neutralization of Special Elements used in an OS Command (OS Command Injection) (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #9OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product constructs all or part of an OS command using externally-influenced input from an upstream component, but it does not neutralize or incorrectly neutralizes special elements that could modify the intended OS command before it is sent to a downstream component.
Architecture and Design
If at all possible, use library calls rather than external processes to recreate the desired functionality.
Architecture and Design · Operation · Sandbox or Jail
Run the code in a "jail" or similar sandbox environment that enforces strict boundaries between the process and the operating system. This may effectively restrict which files can be accessed in a particular directory or which commands can be executed by the software.
Architecture and Design · Attack Surface Reduction
For any data that will be used to generate a command to be executed, keep as much of that data out of external control as possible. For example, in web applications, this may require storing the data locally in the session's state instead of sending it out to the client in a hidden form field.
OWASP Cheat Sheets
Injection Prevention (opens in a new tab)
Injection Prevention in Java (opens in a new tab)
OS Command Injection Defense (opens in a new tab)
Abuse Case (opens in a new tab)
Deserialization (opens in a new tab)
OWASP ASVS 4.0.3
V12.3.5 (opens in a new tab)
V5.3.8 (opens in a new tab)
V1.5.1 (opens in a new tab)
Attack patterns
Command Line Execution through SQL Injection (opens in a new tab)
Command Delimiters (opens in a new tab)
Exploiting Multiple Input Interpretation Layers (opens in a new tab)
Argument Injection (opens in a new tab)
OS Command Injection (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Description

AI analysisMachine-generated, updated 30 Oct 2026, 10:20 UTC

WeaknessesCWE-835, CWE-241, CWE-125 +4

Technical details

References

Community reviews

Related threats