CVE-2026-56846VulnerabilityPublished 31 Aug 2026Updated 2 Nov 2026

Red Hat Security Advisory: nodejs24 security, bug fix, and enhancement update

Affects Red Hat nodejs24 security,Source GCVE Database

Compare

Mentioned vulnerabilities

Authoritative record:CVE-2026-56846· High 7.5

Not known to be exploited · CVSS 7.5 High.

Data as of 2 Nov 2026, 12:32 UTC

CVSS 3.0 base score

7.5High

How severe the flaw is on the 0–10 CVSS scale.

CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

Attack Vector: Network
Attack Complexity: Low
Privileges Required: None
User Interaction: None
Scope: Unchanged
Confidentiality: None
Integrity: None
Availability: High

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable component is bound to the network stack and the set of possible attackers extends beyond the other options listed, up to and including the entire Internet. Such a vulnerability is often termed 'remotely exploitable' and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: Low: Specialized access conditions or extenuating circumstances do not exist. An attacker can expect repeatable success against the vulnerable component.
Privileges Required: None: The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files to carry out an attack.
User Interaction: None: The vulnerable system can be exploited without any interaction from any user.
Scope: Unchanged: An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
Confidentiality: None: There is no loss of confidentiality within the impacted component.
Integrity: None: There is no loss of integrity within the impacted component.
Availability: High: There is total loss of availability, resulting in the attacker being able to fully deny access to resources in the impacted component; this loss is either sustained (while the attacker continues to deliver the attack) or persistent (the condition persists even after the attack has completed). Alternatively, the attacker has the ability to deny some availability, but the loss of availability presents a direct, serious consequence to the impacted component (e.g., the attacker cannot disrupt existing connections, but can prevent new connections; the attacker can repeatedly exploit a vulnerability that, in each instance of a successful attack, leaks a only small amount of memory, but after repeated exploitation causes a service to become completely unavailable).

Definitions: FIRST CVSS v3.1 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 4 Aug 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponized: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 2 Nov 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponized: A Metasploit exploit module or Exploit-DB entry exists (Metasploit scanner modules do not count), or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

Affected software

Product	Affected	Fixed in
nodejsnode	Affected >=24.18.0 <=24.18.0 >=22.23.1 <=22.23.1	Fixed in–
npmnode`pkg:npm/node`Other threats	Affected =24.18.0 =22.23.1	Fixed in–

Check your own hosts for these packages with threat-finder (opens in a new tab), our free open-source scanner.

AI-suggested

Red Hat has released updated nodejs24 packages rebased to the latest Node.js 24 release that address these vulnerabilities. Users should apply the provided updates for their respective Red Hat Enterprise Linux 10 systems as detailed in the advisory and the referenced update article (https://access.redhat.com/articles/11258). No additional mitigation steps are indicated beyond applying the official update.

Description

This Red Hat security advisory addresses multiple vulnerabilities in Node.js 24, including unauthorized filesystem access due to a permission model enforcement flaw, remote memory exhaustion via HTTP/2 retained header blocks, and a heap-use-after-free vulnerability in HTTP/2 handling that can lead to denial of service. The update rebases Node.js 24 to the latest release to include these security fixes along with bug fixes and enhancements. The advisory rates the security impact as Important and provides updated packages for Red Hat Enterprise Linux 10 across various architectures.

Impact

The vulnerabilities could allow unauthorized filesystem access, remote memory exhaustion leading to resource depletion, and denial of service via heap-use-after-free conditions. These issues affect Node.js applications running on Red Hat Enterprise Linux 10 and could impact the availability and security of services relying on Node.js. The security impact is rated Important by Red Hat Product Security.

CWE-400Uncontrolled Resource Consumption (opens in a new tab)
Class weaknessLikelihood of exploit: High
The product does not properly control the allocation and maintenance of a limited resource.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
Architecture and Design
Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended. A strong authentication and access control model will help prevent such attacks from occurring in the first place.
Architecture and Design
Mitigation of resource exhaustion attacks requires that the target system either: recognizes the attack and denies that user further access for a given amount of time, or; uniformly throttles all requests in order to make it more difficult to consume resources more quickly than they can again be freed.
Architecture and Design
Ensure that protocols have specific limits of scale placed on them.
OWASP Cheat Sheets
File Upload (opens in a new tab)
OWASP ASVS 4.0.3
V12.1.1 (opens in a new tab)
Attack patterns
XML Ping of the Death (opens in a new tab)
Regular Expression Exponential Blowup (opens in a new tab)
Sustained Client Engagement (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-284Improper Access Control (opens in a new tab)
Pillar weaknessCWE Top 25 (2025): #19OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product does not restrict or incorrectly restricts access to a resource from an unauthorized actor.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
Architecture and Design · Operation
Very carefully manage the setting, management, and handling of privileges. Explicitly manage trust zones in the software.
Architecture and Design · Separation of Privilege
Compartmentalize the system to have "safe" areas where trust boundaries can be unambiguously drawn. Do not allow sensitive data to go outside of the trust boundary and always be careful when interfacing with a compartment outside of the safe area.
OWASP Cheat Sheets
Docker Security (opens in a new tab)
Third Party Javascript Management (opens in a new tab)
Virtual Patching (opens in a new tab)
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V1.4.4 (opens in a new tab)
V1.4.5 (opens in a new tab)
V1.10.1 (opens in a new tab)
Attack patterns
Embedding Scripts within Scripts (opens in a new tab)
Modification of Windows Service Configuration (opens in a new tab)
Malicious Root Certificate (opens in a new tab)
Intent Spoof (opens in a new tab)
WebView Exposure (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-825Expired Pointer Dereference (opens in a new tab)
Base weakness
The product dereferences a pointer that contains a location for memory that was previously valid, but is no longer valid.
Architecture and Design
Choose a language that provides automatic memory management.
Implementation
When freeing pointers, be sure to set them to NULL once they are freed. However, the utilization of multiple or complex data structures may lower the usefulness of this strategy.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-303Incorrect Implementation of Authentication Algorithm (opens in a new tab)
Base weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
The requirements for the product dictate the use of an established authentication algorithm, but the implementation of the algorithm is incorrect.
OWASP Cheat Sheets
OWASP Authentication (opens in a new tab)
OWASP ASVS 4.0.3
V2.8.5 (opens in a new tab)
V2.8.4 (opens in a new tab)
V9.2.3 (opens in a new tab)
Attack patterns
Reflection Attack in Authentication Protocol (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-73External Control of File Name or Path (opens in a new tab)
Base weaknessLikelihood of exploit: HighOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The product allows user input to control or influence paths or file names that are used in filesystem operations.
Architecture and Design
When the set of filenames is limited or known, create a mapping from a set of fixed input values (such as numeric IDs) to the actual filenames, and reject all other inputs. For example, ID 1 could map to "inbox.txt" and ID 2 could map to "profile.txt".
Architecture and Design · Operation
Run your code in a "jail" or similar sandbox environment that enforces strict boundaries between the process and the operating system. This may effectively restrict all access to files within a particular directory.
Architecture and Design
For any security checks that are performed on the client side, ensure that these checks are duplicated on the server side, in order to avoid CWE-602. Attackers can bypass the client-side checks by modifying values after the checks have been performed, or by changing the client to remove the client-side checks…
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
Secure Design Principles (opens in a new tab)
OWASP ASVS 4.0.3
V12.3.2 (opens in a new tab)
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
Attack patterns
Subverting Environment Variable Values (opens in a new tab)
Leverage Alternate Encoding (opens in a new tab)
Using Slashes and URL Encoding Combined to Bypass Validation Logic (opens in a new tab)
URL Encoding (opens in a new tab)
Manipulating Web Input to File System Calls (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-322Key Exchange without Entity Authentication (opens in a new tab)
Base weaknessLikelihood of exploit: HighOWASP Top 10 A04:2025: Cryptographic Failures (opens in a new tab)
The product performs a key exchange with an actor without verifying the identity of that actor.
Architecture and Design
Ensure that proper authentication is included in the system design.
Implementation
Understand and properly implement all checks necessary to ensure the identity of entities involved in encrypted communications.
OWASP Cheat Sheets
Transport Layer Protection (opens in a new tab)
User Privacy Protection (opens in a new tab)
Password Storage (opens in a new tab)
Cryptographic Storage (opens in a new tab)
HSTS (opens in a new tab)
OWASP ASVS 4.0.3
V1.2.3 (opens in a new tab)
V1.2.2 (opens in a new tab)
V1.2.4 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-367Time-of-check Time-of-use (TOCTOU) Race Condition (opens in a new tab)
Base weaknessLikelihood of exploit: Medium
The product checks the state of a resource before using that resource, but the resource's state can change between the check and the use in a way that invalidates the results of the check.
Implementation
The most basic advice for TOCTOU vulnerabilities is to not perform a check before the use. This does not resolve the underlying issue of the execution of a function on a resource whose state and identity cannot be assured, but it does help to limit the false sense of security given by the check.
Implementation
When the file being altered is owned by the current user and group, set the effective gid and uid to that of the current user and group when executing this statement.
Architecture and Design
Limit the interleaving of operations on files from multiple processes.
OWASP Cheat Sheets
Abuse Case (opens in a new tab)
OWASP ASVS 4.0.3
V1.11.3 (opens in a new tab)
V11.1.6 (opens in a new tab)
V1.11.2 (opens in a new tab)
Attack patterns
Leveraging Race Conditions via Symbolic Links (opens in a new tab)
Leveraging Time-of-Check and Time-of-Use (TOCTOU) Race Conditions (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-551Incorrect Behavior Order: Authorization Before Parsing and Canonicalization (opens in a new tab)
Base weakness
If a web server does not fully parse requested URLs before it examines them for authorization, it may be possible for an attacker to bypass authorization protection.
Architecture and Design
URL Inputs should be decoded and canonicalized to the application's current internal representation before being validated and processed for authorization. Make sure that your application does not decode the same input twice.
OWASP ASVS 4.0.3
V8.3.8 (opens in a new tab)
V13.4.2 (opens in a new tab)
V7.2.2 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-444Inconsistent Interpretation of HTTP Requests (HTTP Request Smuggling) (opens in a new tab)
Base weaknessOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The product acts as an intermediary HTTP agent (such as a proxy or firewall) in the data flow between two entities such as a client and server, but it does not interpret malformed HTTP requests or responses in ways that are consistent with how the messages will be processed by those entities that are at the ultimate destination.
Implementation
Use a web server that employs a strict HTTP parsing procedure, such as Apache.
Implementation
Use only SSL communication.
Implementation
Terminate the client session after each request.
OWASP Cheat Sheets
REST Assessment (opens in a new tab)
REST Security (opens in a new tab)
Cross-Site Request Forgery Prevention (opens in a new tab)
Secure Design Principles (opens in a new tab)
OWASP ASVS 4.0.3
V13.2.5 (opens in a new tab)
Attack patterns
HTTP Response Smuggling (opens in a new tab)
HTTP Request Smuggling (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-617Reachable Assertion (opens in a new tab)
Base weakness
The product contains an assert() or similar statement that can be triggered by an attacker, which leads to an application exit or other behavior that is more severe than necessary.
Implementation
If the assertion statement is required (e.g., for security or reliability), change the invoking code to avoid the conditions that trigger the assertion.
Implementation
Consider changing the assertion to some other less "fatal" error. This might not be easy to implement, since other code may be needed to handle the error.
Implementation
Make sensitive open/close operations non-reachable from directly user-controlled data (e.g. open/close resources)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Affected software

Description

AI analysisMachine-generated, updated 2 Nov 2026, 12:32 UTC

Public exploits and detectionGitHub proofs of concept

WeaknessesCWE-400, CWE-284, CWE-825 +7

Technical details

References

Community reviews

Related threats