CVE-2026-83374VulnerabilityPublished 29 Oct 2026

Red Hat Security Advisory: OpenJDK 25.0.5 Security Update for Windows Builds

Affects Red Hat OpenJDK 25.0.5Source GCVE Database

Compare

Mentioned vulnerabilities

Authoritative record:CVE-2026-83374· Medium 5.9

Not known to be exploited · CVSS 5.9 Medium.

Data as of 30 Oct 2026, 03:00 UTC

CVSS 3.1 base score

5.9Medium

How severe the flaw is on the 0–10 CVSS scale.

Thin evidence

One scorer or none

CVSS scores by source
CNA (oracle)	CVSS 3.1	5.9

CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N

Attack Vector: Network
Attack Complexity: High
Privileges Required: None
User Interaction: None
Scope: Unchanged
Confidentiality: None
Integrity: High
Availability: None

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable component is bound to the network stack and the set of possible attackers extends beyond the other options listed, up to and including the entire Internet. Such a vulnerability is often termed 'remotely exploitable' and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: High: A successful attack depends on conditions beyond the attacker's control. That is, a successful attack cannot be accomplished at will, but requires the attacker to invest in some measurable amount of effort in preparation or execution against the vulnerable component before a successful attack can be expected. For example, a successful attack may require an attacker to: gather knowledge about the environment in which the vulnerable target/component exists; prepare the target environment to improve exploit reliability; or inject themselves into the logical network path between the target and the resource requested by the victim in order to read and/or modify network communications (e.g., a man in the middle attack).
Privileges Required: None: The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files to carry out an attack.
User Interaction: None: The vulnerable system can be exploited without any interaction from any user.
Scope: Unchanged: An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
Confidentiality: None: There is no loss of confidentiality within the impacted component.
Integrity: High: There is a total loss of integrity, or a complete loss of protection. For example, the attacker is able to modify any/all files protected by the impacted component. Alternatively, only some files can be modified, but malicious modification would present a direct, serious consequence to the impacted component.
Availability: None: There is no impact to availability within the impacted component.

Definitions: FIRST CVSS v3.1 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 20 Oct 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponized: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 29 Oct 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponized: A Metasploit exploit module or Exploit-DB entry exists (Metasploit scanner modules do not count), or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

Affected software

Product	Affected	Fixed in
Oracle CorporationOracle Java SE	Affected 8u503 – 27 7 affected builds	Fixed in–
Oracle CorporationOracle GraalVM for JDK	Affected =17.0.20.1 =21.0.12.1	Fixed in–
Oracle CorporationOracle GraalVM Enterprise Edition	Affected =21.3.19.1.1	Fixed in–
Mavencom.oracle.java/java-se`pkg:maven/com.oracle.java/java-se`Other threats	Affected 8u503 – 27 8 affected builds	Fixed in–

Check your own hosts for these packages with threat-finder (opens in a new tab), our free open-source scanner.

AI-suggested

Red Hat has released an official security update (OpenJDK 25.0.5 for Windows) that addresses all listed vulnerabilities. Users should apply this update promptly to ensure their systems are protected. Before applying this update, ensure all previously released relevant errata have been applied. Detailed update instructions are available in Red Hat's advisory at https://access.redhat.com/articles/11258. No additional mitigation steps are indicated beyond applying the official update.

Description

Red Hat has released a critical security update for the Eclipse Temurin build of OpenJDK 25 for Windows, version 25.0.5. This update replaces versions 25.0.4 and 25.0.4.1 and includes multiple security and bug fixes addressing numerous vulnerabilities across various components such as TLS, LDAP, HTTP client/server, XML processing, image handling, and certificate validation. The update also distrusts certain intermediate CA certificates due to security concerns. The advisory covers a broad set of CVEs related to enhancements and fixes in cryptographic operations, authentication mechanisms, and processing of various data formats.

Impact

The vulnerabilities addressed in this update have a critical security impact, affecting the confidentiality, integrity, and authentication mechanisms within the OpenJDK runtime environment. Issues in cryptographic padding, TLS handshake and certificate validation, authentication protocols (LDAP, SASL, Kerberos), and processing of various data formats could potentially allow attackers to bypass security controls, cause denial of service, or execute unauthorized code. The distrust of certain intermediate CA certificates mitigates risks related to certificate-based attacks. Although no known exploits in the wild are reported, the breadth and criticality of the fixes indicate significant potential impact if left unpatched.

CWE-358Improperly Implemented Security Check for Standard (opens in a new tab)
Base weakness
The product does not implement or incorrectly implements one or more security-relevant checks as specified by the design of a standardized algorithm, protocol, or technique.
CWE-295Improper Certificate Validation (opens in a new tab)
Base weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
The product does not validate, or incorrectly validates, a certificate.
Architecture and Design · Implementation
Certificates should be carefully managed and checked to assure that data are encrypted with the intended owner's public key.
Implementation
If certificate pinning is being used, ensure that all relevant properties of the certificate are fully validated before the certificate is pinned, including the hostname.
OWASP Cheat Sheets
Transport Layer Protection (opens in a new tab)
TLS Cipher String (opens in a new tab)
OWASP Authentication (opens in a new tab)
OWASP ASVS 4.0.3
V9.2.1 (opens in a new tab)
V1.9.2 (opens in a new tab)
V2.8.5 (opens in a new tab)
Attack patterns
Creating a Rogue Certification Authority Certificate (opens in a new tab)
Signature Spoofing by Improper Validation (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-733Compiler Optimization Removal or Modification of Security-critical Code (opens in a new tab)
Base weakness
The developer builds a security-critical protection mechanism into the software, but the compiler optimizes the program such that the mechanism is removed or modified.
Attack patterns
Buffer Overflow via Environment Variables (opens in a new tab)
Filter Failure through Buffer Overflow (opens in a new tab)
Overflow Variables and Tags (opens in a new tab)
Buffer Overflow in an API Call (opens in a new tab)
Buffer Overflow in Local Command-Line Utilities (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-90Improper Neutralization of Special Elements used in an LDAP Query (LDAP Injection) (opens in a new tab)
Base weaknessOWASP Top 10 A05:2025: Injection (opens in a new tab)
The product constructs all or part of an LDAP query using externally-influenced input from an upstream component, but it does not neutralize or incorrectly neutralizes special elements that could modify the intended LDAP query when it is sent to a downstream component.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
OWASP Cheat Sheets
LDAP Injection Prevention (opens in a new tab)
Abuse Case (opens in a new tab)
Deserialization (opens in a new tab)
Injection Prevention (opens in a new tab)
SQL Injection Prevention (opens in a new tab)
OWASP ASVS 4.0.3
V5.3.7 (opens in a new tab)
V1.5.1 (opens in a new tab)
Attack patterns
LDAP Injection (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-303Incorrect Implementation of Authentication Algorithm (opens in a new tab)
Base weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
The requirements for the product dictate the use of an established authentication algorithm, but the implementation of the algorithm is incorrect.
OWASP Cheat Sheets
OWASP Authentication (opens in a new tab)
OWASP ASVS 4.0.3
V2.8.5 (opens in a new tab)
V2.8.4 (opens in a new tab)
V9.2.3 (opens in a new tab)
Attack patterns
Reflection Attack in Authentication Protocol (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-611Improper Restriction of XML External Entity Reference (opens in a new tab)
Base weaknessOWASP Top 10 A02:2025: Security Misconfiguration (opens in a new tab)
The product processes an XML document that can contain XML entities with URIs that resolve to documents outside of the intended sphere of control, causing the product to embed incorrect documents into its output.
Implementation · System Configuration
Many XML parsers and validators can be configured to disable external entity expansion.
OWASP Cheat Sheets
Deserialization (opens in a new tab)
XML Security (opens in a new tab)
XML External Entity Prevention (opens in a new tab)
OWASP ASVS 4.0.3
V5.5.2 (opens in a new tab)
Attack patterns
Data Serialization External Entities Blowup (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-444Inconsistent Interpretation of HTTP Requests (HTTP Request Smuggling) (opens in a new tab)
Base weaknessOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The product acts as an intermediary HTTP agent (such as a proxy or firewall) in the data flow between two entities such as a client and server, but it does not interpret malformed HTTP requests or responses in ways that are consistent with how the messages will be processed by those entities that are at the ultimate destination.
Implementation
Use a web server that employs a strict HTTP parsing procedure, such as Apache.
Implementation
Use only SSL communication.
Implementation
Terminate the client session after each request.
OWASP Cheat Sheets
REST Assessment (opens in a new tab)
REST Security (opens in a new tab)
Cross-Site Request Forgery Prevention (opens in a new tab)
Secure Design Principles (opens in a new tab)
OWASP ASVS 4.0.3
V13.2.5 (opens in a new tab)
Attack patterns
HTTP Response Smuggling (opens in a new tab)
HTTP Request Smuggling (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-776Improper Restriction of Recursive Entity References in DTDs (Billion Laughs Attack) (opens in a new tab)
Base weaknessLikelihood of exploit: MediumOWASP Top 10 A02:2025: Security Misconfiguration (opens in a new tab)
The product uses XML documents and allows their structure to be defined with a Document Type Definition (DTD), but it does not properly control the number of recursive definitions of entities.
Operation
If possible, prohibit the use of DTDs or use an XML parser that limits the expansion of recursive DTD entities.
Implementation
Before parsing XML files with associated DTDs, scan for recursive entity declarations and do not continue parsing potentially explosive content.
OWASP Cheat Sheets
File Upload (opens in a new tab)
OWASP ASVS 4.0.3
V12.1.1 (opens in a new tab)
Attack patterns
Exponential Data Expansion (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-125Out-of-bounds Read (opens in a new tab)
Base weaknessCWE Top 25 (2025): #8
The product reads data past the end, or before the beginning, of the intended buffer.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Architecture and Design · Language Selection
Use a language that provides appropriate memory abstractions.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
Attack patterns
Overread Buffers (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-91XML Injection (opens in a new tab)
Base weaknessOWASP Top 10 A05:2025: Injection (opens in a new tab)
The product does not properly neutralize special elements that are used in XML, allowing attackers to modify the syntax, content, or commands of the XML before it is processed by an end system.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
OWASP Cheat Sheets
Abuse Case (opens in a new tab)
Deserialization (opens in a new tab)
Injection Prevention (opens in a new tab)
SQL Injection Prevention (opens in a new tab)
Injection Prevention in Java (opens in a new tab)
OWASP ASVS 4.0.3
V1.5.1 (opens in a new tab)
Attack patterns
XML Injection (opens in a new tab)
XPath Injection (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-22Improper Limitation of a Pathname to a Restricted Directory (Path Traversal) (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #6OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product uses external input to construct a pathname that is intended to identify a file or directory that is located underneath a restricted parent directory, but the product does not properly neutralize special elements within the pathname that can cause the pathname to resolve to a location that is outside of the restricted directory.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Architecture and Design
For any security checks that are performed on the client side, ensure that these checks are duplicated on the server side, in order to avoid CWE-602. Attackers can bypass the client-side checks by modifying values after the checks have been performed, or by changing the client to remove the client-side checks…
Implementation · Input Validation
Inputs should be decoded and canonicalized to the application's current internal representation before being validated (CWE-180). Make sure that the application does not decode the same input twice (CWE-174).
OWASP Cheat Sheets
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V12.3.1 (opens in a new tab)
Attack patterns
Path Traversal (opens in a new tab)
Using Slashes and URL Encoding Combined to Bypass Validation Logic (opens in a new tab)
Manipulating Web Input to File System Calls (opens in a new tab)
Using Escaped Slashes in Alternate Encoding (opens in a new tab)
Using Slashes in Alternate Encoding (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-93Improper Neutralization of CRLF Sequences (CRLF Injection) (opens in a new tab)
Base weaknessOWASP Top 10 A05:2025: Injection (opens in a new tab)
The product uses CRLF (carriage return line feeds) as a special element, e.g. to separate lines or records, but it does not neutralize or incorrectly neutralizes CRLF sequences from inputs.
Implementation
Avoid using CRLF as a special sequence.
Implementation
Appropriately filter or quote CRLF sequences in user-controlled input.
OWASP Cheat Sheets
Abuse Case (opens in a new tab)
Deserialization (opens in a new tab)
Injection Prevention (opens in a new tab)
SQL Injection Prevention (opens in a new tab)
Injection Prevention in Java (opens in a new tab)
OWASP ASVS 4.0.3
V1.5.1 (opens in a new tab)
Attack patterns
Command Delimiters (opens in a new tab)
Web Server Logs Tampering (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-354Improper Validation of Integrity Check Value (opens in a new tab)
Base weaknessLikelihood of exploit: Medium
The product does not validate or incorrectly validates the integrity check values or "checksums" of a message.
Implementation
The protocol specification describes the algorithm used for calculating the checksum. It is then a matter of implementing the calculation and verifying that the calculated checksum and the received checksum match.
OWASP Cheat Sheets
XML Security (opens in a new tab)
REST Security (opens in a new tab)
JSON Web Token for Java (opens in a new tab)
OWASP ASVS 4.0.3
V11.1.7 (opens in a new tab)
V13.3.2 (opens in a new tab)
V3.5.3 (opens in a new tab)
Attack patterns
Checksum Spoofing (opens in a new tab)
Padding Oracle Crypto Attack (opens in a new tab)
Manipulating Writeable Configuration Files (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-653Improper Isolation or Compartmentalization (opens in a new tab)
Class weaknessOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The product does not properly compartmentalize or isolate functionality, processes, or resources that require different privilege levels, rights, or permissions.
Architecture and Design
Break up privileges between different modules, objects, or entities. Minimize the interfaces between modules and require strong access control between them.
OWASP Cheat Sheets
Secure Design Principles (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-770Allocation of Resources Without Limits or Throttling (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #25
The product allocates a reusable resource or group of resources on behalf of an actor without imposing any intended restrictions on the size or number of resources that can be allocated.
Requirements
Clearly specify the minimum and maximum expectations for capabilities, and dictate which behaviors are acceptable when resource allocation reaches limits.
Architecture and Design
Limit the amount of resources that are accessible to unprivileged users. Set per-user limits for resources. Allow the system administrator to define these limits. Be careful to avoid CWE-410.
Architecture and Design
Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended.
OWASP Cheat Sheets
Abuse Case (opens in a new tab)
OWASP ASVS 4.0.3
V8.1.4 (opens in a new tab)
V13.4.1 (opens in a new tab)
V11.1.4 (opens in a new tab)
Attack patterns
XML Ping of the Death (opens in a new tab)
Exponential Data Expansion (opens in a new tab)
Serialized Data Parameter Blowup (opens in a new tab)
Serialized Data with Nested Payloads (opens in a new tab)
Oversized Serialized Data Payloads (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-749Exposed Dangerous Method or Function (opens in a new tab)
Base weaknessLikelihood of exploit: LowOWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product provides an Applications Programming Interface (API) or similar interface for interaction with external actors, but the interface includes a dangerous method or function that is not properly restricted.
Architecture and Design
If you must expose a method, make sure to perform input validation on all arguments, limit access to authorized parties, and protect against all possible vulnerabilities.
Architecture and Design · Implementation · Attack Surface Reduction
Identify all exposed functionality. Explicitly list all functionality that must be exposed to some user or set of users. Identify which functionality may be: accessible to all users; restricted to a small set of privileged users; prevented from being directly accessible at all
OWASP Cheat Sheets
Third Party Javascript Management (opens in a new tab)
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V14.5.1 (opens in a new tab)
V10.1.1 (opens in a new tab)
V1.4.4 (opens in a new tab)
Attack patterns
WebView Injection (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-1286Improper Validation of Syntactic Correctness of Input (opens in a new tab)
Base weakness
The product receives input that is expected to be well-formed - i.e., to comply with a certain syntax - but it does not validate or incorrectly validates that the input complies with the syntax.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
Attack patterns
SQL Injection (opens in a new tab)
NoSQL Injection (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-524Use of Cache Containing Sensitive Information (opens in a new tab)
Base weakness
The code uses a cache that contains sensitive information, but the cache can be read by an actor outside of the intended control sphere.
Architecture and Design
Protect information stored in cache.
Architecture and Design
Do not store unnecessarily sensitive information in the cache.
Architecture and Design
Consider using encryption in the cache.
OWASP ASVS 4.0.3
V8.1.1 (opens in a new tab)
V8.1.2 (opens in a new tab)
Attack patterns
Lifting Sensitive Data Embedded in Cache (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-488Exposure of Data Element to Wrong Session (opens in a new tab)
Base weakness
The product does not sufficiently enforce boundaries between the states of different sessions, causing data to be provided to, or used by, the wrong session.
Architecture and Design
Protect the application's sessions from information leakage. Make sure that a session's data is not used or visible by other sessions.
Testing
Use a static analysis tool to scan the code for information leakage vulnerabilities (e.g. Singleton Member Field).
Architecture and Design
In a multithreading environment, storing user data in Servlet member fields introduces a data access race condition. Do not use member fields to store information in the Servlet.
Attack patterns
Session Credential Falsification through Prediction (opens in a new tab)
Reusing Session IDs (aka Session Replay) (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-409Improper Handling of Highly Compressed Data (Data Amplification) (opens in a new tab)
Base weakness
The product does not handle or incorrectly handles a compressed input with a very high compression ratio that produces a large output.
OWASP Cheat Sheets
File Upload (opens in a new tab)
OWASP ASVS 4.0.3
V12.1.2 (opens in a new tab)
V12.1.1 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-787Name not in the CWE catalogue (opens in a new tab)
CWE-835Name not in the CWE catalogue (opens in a new tab)
CWE-1025Name not in the CWE catalogue (opens in a new tab)

GCVE source: db.gcve.eu
Csaf Category: csaf_security_advisory
Csaf Version: 2.0
Publisher: Red Hat Product Security
Advisory ID: RHSA-2026:90912
Vendor Severity: critical
CVE Count: 42
Additional Cves: CVE-2026-83376, CVE-2026-83378, CVE-2026-83380, CVE-2026-83381, CVE-2026-83387, CVE-2026-83395, CVE-2026-83400, CVE-2026-87255, CVE-2026-87290, CVE-2026-87291, CVE-2026-87292, CVE-2026-87294, CVE-2026-87367, CVE-2026-91332, CVE-2026-91333, CVE-2026-91334, CVE-2026-91335, CVE-2026-91373, CVE-2026-91374, CVE-2026-91375, CVE-2026-91379, CVE-2026-91380, CVE-2026-91382, CVE-2026-91394, CVE-2026-91397, CVE-2026-91398, CVE-2026-91400, CVE-2026-91403, CVE-2026-91410, CVE-2026-91415, CVE-2026-91418, CVE-2026-91451, CVE-2026-91452, CVE-2026-91453, CVE-2026-91461, CVE-2026-91462, CVE-2026-91463, CVE-2026-91464, CVE-2026-91487, CVE-2026-101516, CVE-2026-114820

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Affected software

Description

AI analysisMachine-generated, updated 30 Oct 2026, 03:00 UTC

WeaknessesCWE-358, CWE-295, CWE-733 +20

Technical details

References

Community reviews

Related threats