CVE-2025-1218VulnerabilityPublished 21 Oct 2026Updated 26 Oct 2026

Red Hat Security Advisory: php:7.4 security update

Affects Red Hat php:7.4Source GCVE Database

Mentioned vulnerabilities

Authoritative record:CVE-2025-1218· Low 3.4

Not known to be exploited · CVSS 3.4 Low · fixed in Red Hat package updates : update Red Hat php:7.4 when convenient.

Data as of 26 Oct 2026, 17:16 UTC

CVSS 3.1 base score

3.4Low

How severe the flaw is on the 0–10 CVSS scale.

EPSS: 0.2% chance of exploitation in 30 days – higher than 20% of CVEsExploit Prediction Scoring System: the likelihood attackers will use this flaw soon.
Patch: Available – fixed in 8.5.11, 8.4.26, 8.3.35 +1

CVSS:3.1/AV:A/AC:H/PR:N/UI:N/S:C/C:L/I:N/A:N

Attack Vector: Adjacent
Attack Complexity: High
Privileges Required: None
User Interaction: None
Scope: Changed
Confidentiality: Low
Integrity: None
Availability: None

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Adjacent: The vulnerable component is bound to the network stack, but the attack is limited at the protocol level to a logically adjacent topology. This can mean an attack must be launched from the same shared physical (e.g., Bluetooth or IEEE 802.11) or logical (e.g., local IP subnet) network, or from within a secure or otherwise limited administrative domain (e.g., MPLS, secure VPN to an administrative network zone).
Attack Complexity: High: A successful attack depends on conditions beyond the attacker's control. That is, a successful attack cannot be accomplished at will, but requires the attacker to invest in some measurable amount of effort in preparation or execution against the vulnerable component before a successful attack can be expected. For example, a successful attack may require an attacker to: gather knowledge about the environment in which the vulnerable target/component exists; prepare the target environment to improve exploit reliability; or inject themselves into the logical network path between the target and the resource requested by the victim in order to read and/or modify network communications (e.g., a man in the middle attack).
Privileges Required: None: The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files to carry out an attack.
User Interaction: None: The vulnerable system can be exploited without any interaction from any user.
Scope: Changed: An exploited vulnerability can affect resources beyond the security scope managed by the security authority of the vulnerable component. In this case, the vulnerable component and the impacted component are different and managed by different security authorities.
Confidentiality: Low: There is some loss of confidentiality. Access to some restricted information is obtained, but the attacker does not have control over what information is obtained, or the amount or kind of loss is limited. The information disclosure does not cause a direct, serious loss to the impacted component.
Integrity: None: There is no loss of integrity within the impacted component.
Availability: None: There is no impact to availability within the impacted component.

Definitions: FIRST CVSS v3.1 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 25 Sep 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponised: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 26 Oct 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponised: Public exploit code exists in Metasploit or Exploit-DB, or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

Upgrade PHP to 8.5.11, 8.4.26, 8.3.35 or 8.2.34.

Affected software

Product	Affected	Fixed in
PHP GroupPHP	Affected ≥ 8.5.*, < 8.5.11	Fixed in 8.5.11
PHP GroupPHP	Affected ≥ 8.4.*, < 8.4.26	Fixed in 8.4.26
PHP GroupPHP	Affected ≥ 8.3.*, < 8.3.35	Fixed in 8.3.35
PHP GroupPHP	Affected ≥ 8.2.*, < 8.2.34	Fixed in 8.2.34

Description

PHP is an HTML-embedded scripting language commonly used with the Apache HTTP Server. Security Fix(es): * php: php: Out-of-bounds read via empty HTTP redirect Location header (CVE-2026-93682) * php: PHP: Archive entry injection via integer overflow in TAR parser (CVE-2026-6103) * php: PHP: Denial of Service via heap buffer overflow in SOAP client (CVE-2025-14181) * php: php: Denial of Service via unbounded recursion in SOAP parser (CVE-2026-91765) * php: php: Credential disclosure via cross-origin HTTP redirects (CVE-2026-91766) * php: php: Information disclosure via crafted TLS server certificate (CVE-2026-91767) * php: php: Denial of Service via out-of-bounds read in mysqlnd wire protocol parser (CVE-2025-1218) * php: php: Access control bypass via partial IPv6 address comparison (CVE-2026-91768) * php: php: Information disclosure via out-of-bounds read in stream filters (CVE-2026-92842) * php: php: Server impersonation via Common Name fallback in TLS verification (CVE-2026-91769) * php: OOM bailout during request parsing leads to memory corruption and RCE (CVE-2026-109618) * php: fatal error handling retains stale request state leading to use-after-free (CVE-2026-109619) For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.

CWE-122Heap-based Buffer Overflow (opens in a new tab)
Variant weaknessLikelihood of exploit: HighCWE Top 25 (2025): #16
A heap overflow condition is a buffer overflow, where the buffer that can be overwritten is allocated in the heap portion of memory, generally meaning that the buffer was allocated using a routine such as malloc().
Pre-design: Use a language or compiler that performs automatic bounds checking.
Architecture and Design
Use an abstraction library to abstract away risky APIs. Not a complete solution.
Operation · Build and Compilation · Environment Hardening
Use automatic buffer overflow detection mechanisms that are offered by certain compilers or compiler extensions. Examples include: the Microsoft Visual Studio /GS flag, Fedora/Red Hat FORTIFY_SOURCE GCC flag, StackGuard, and ProPolice, which provide various mechanisms including canary-based detection and range/index…
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
Attack patterns
Forced Integer Overflow (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-190Integer Overflow or Wraparound (opens in a new tab)
Base weaknessLikelihood of exploit: Medium
The product performs a calculation that can produce an integer overflow or wraparound when the logic assumes that the resulting value will always be larger than the original value. This occurs when an integer value is incremented to a value that is too large to store in the associated representation. When this occurs, the value may become a very small or negative number.
Requirements
Ensure that all protocols are strictly defined, such that all out-of-bounds behavior can be identified simply, and require strict conformance to the protocol.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V5.4.3 (opens in a new tab)
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
Attack patterns
Forced Integer Overflow (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-674Uncontrolled Recursion (opens in a new tab)
Class weakness
The product does not properly control the amount of recursion that takes place, consuming excessive resources, such as allocated memory or the program stack.
Implementation
Ensure that an end condition will be reached under all logic conditions. The end condition may include checking against the depth of recursion and exiting with an error if the recursion goes too deep. The complexity of the end condition contributes to the effectiveness of this action.
Implementation
Increase the stack size.
Attack patterns
Serialized Data with Nested Payloads (opens in a new tab)
Oversized Serialized Data Payloads (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-200Exposure of Sensitive Information to an Unauthorized Actor (opens in a new tab)
Class weaknessLikelihood of exploit: HighCWE Top 25 (2025): #20OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product exposes sensitive information to an actor that is not explicitly authorized to have access to that information.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
Architecture and Design · Separation of Privilege
Compartmentalize the system to have "safe" areas where trust boundaries can be unambiguously drawn. Do not allow sensitive data to go outside of the trust boundary and always be careful when interfacing with a compartment outside of the safe area.
OWASP Cheat Sheets
Error Handling (opens in a new tab)
Logging (opens in a new tab)
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V8.3.4 (opens in a new tab)
V14.3.3 (opens in a new tab)
V7.3.3 (opens in a new tab)
Attack patterns
Subverting Environment Variable Values (opens in a new tab)
ICMP Echo Request Ping (opens in a new tab)
TCP SYN Scan (opens in a new tab)
Enumerate Mail Exchange (MX) Records (opens in a new tab)
DNS Zone Transfers (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-940Improper Verification of Source of a Communication Channel (opens in a new tab)
Base weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
The product establishes a communication channel to handle an incoming request that has been initiated by an actor, but it does not properly verify that the request is coming from the expected origin.
Architecture and Design
Use a mechanism that can validate the identity of the source, such as a certificate, and validate the integrity of data to ensure that it cannot be modified in transit using an Adversary-in-the-Middle (AITM) attack.
OWASP Cheat Sheets
OWASP Authentication (opens in a new tab)
OWASP ASVS 4.0.3
V1.14.1 (opens in a new tab)
V14.5.2 (opens in a new tab)
V14.5.3 (opens in a new tab)
Attack patterns
WebView Injection (opens in a new tab)
Connection Reset (opens in a new tab)
TCP RST Injection (opens in a new tab)
Traffic Injection (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-295Improper Certificate Validation (opens in a new tab)
Base weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
The product does not validate, or incorrectly validates, a certificate.
Architecture and Design · Implementation
Certificates should be carefully managed and checked to assure that data are encrypted with the intended owner's public key.
Implementation
If certificate pinning is being used, ensure that all relevant properties of the certificate are fully validated before the certificate is pinned, including the hostname.
OWASP Cheat Sheets
Transport Layer Protection (opens in a new tab)
TLS Cipher String (opens in a new tab)
OWASP Authentication (opens in a new tab)
OWASP ASVS 4.0.3
V9.2.1 (opens in a new tab)
V1.9.2 (opens in a new tab)
V2.8.5 (opens in a new tab)
Attack patterns
Creating a Rogue Certification Authority Certificate (opens in a new tab)
Signature Spoofing by Improper Validation (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-125Out-of-bounds Read (opens in a new tab)
Base weaknessCWE Top 25 (2025): #8
The product reads data past the end, or before the beginning, of the intended buffer.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Architecture and Design · Language Selection
Use a language that provides appropriate memory abstractions.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
Attack patterns
Overread Buffers (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-416Use After Free (opens in a new tab)
Variant weaknessLikelihood of exploit: HighCWE Top 25 (2025): #7
The product reuses or references memory after it has been freed. At some point afterward, the memory may be allocated again and saved in another pointer, while the original pointer references a location somewhere within the new allocation. Any operations using the original pointer are no longer valid because the memory "belongs" to the code that operates on the new pointer.
Architecture and Design · Language Selection
Choose a language that provides automatic memory management.
Implementation · Attack Surface Reduction
When freeing pointers, be sure to set them to NULL once they are freed. However, the utilization of multiple or complex data structures may lower the usefulness of this strategy.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Affected software

Description

WeaknessesCWE-122, CWE-190, CWE-674 +5

Technical details

References

Community reviews

Related threats