Red Hat Security Advisory: Red Hat Ansible Automation Platform 2.6 Container Release Update
Affects Red HatSource GCVE Database
Not known to be exploited · CVSS 7.5 High →: upgrade Red Hat azure-core to 1.38.0 soon.
Data as of 20 Nov 2026, 19:32 UTC
- Patch
- Available – fixed in 1.38.0
CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:U/RL:O/RC:CBase metrics
- Attack Vector
- Network
- Attack Complexity
- High
- Privileges Required
- Low
- User Interaction
- None
- Scope
- Unchanged
- Confidentiality
- High
- Integrity
- High
- Availability
- High
Temporal metrics
- Exploit Code Maturity
- Unproven
- Remediation Level
- Official Fix
- Report Confidence
- Confirmed
Bold values are the worst case: easiest to exploit or largest impact.
- Attack Vector: Network
- The vulnerable component is bound to the network stack and the set of possible attackers extends beyond the other options listed, up to and including the entire Internet. Such a vulnerability is often termed 'remotely exploitable' and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
- Attack Complexity: High
- A successful attack depends on conditions beyond the attacker's control. That is, a successful attack cannot be accomplished at will, but requires the attacker to invest in some measurable amount of effort in preparation or execution against the vulnerable component before a successful attack can be expected. For example, a successful attack may require an attacker to: gather knowledge about the environment in which the vulnerable target/component exists; prepare the target environment to improve exploit reliability; or inject themselves into the logical network path between the target and the resource requested by the victim in order to read and/or modify network communications (e.g., a man in the middle attack).
- Privileges Required: Low
- The attacker is authorized with (i.e., requires) privileges that provide basic user capabilities that could normally affect only settings and files owned by a user. Alternatively, an attacker with Low privileges may have the ability to cause an impact only to non-sensitive resources.
- User Interaction: None
- The vulnerable system can be exploited without any interaction from any user.
- Scope: Unchanged
- An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
- Confidentiality: High
- There is total loss of confidentiality, resulting in all resources within the impacted component being divulged to the attacker. Alternatively, access to only some restricted information is obtained, but the disclosed information presents a direct, serious impact.
- Integrity: High
- There is a total loss of integrity, or a complete loss of protection. For example, the attacker is able to modify any/all files protected by the impacted component. Alternatively, only some files can be modified, but malicious modification would present a direct, serious consequence to the impacted component.
- Availability: High
- There is total loss of availability, resulting in the attacker being able to fully deny access to resources in the impacted component; this loss is either sustained (while the attacker continues to deliver the attack) or persistent (the condition persists even after the attack has completed). Alternatively, the attacker has the ability to deny some availability, but the loss of availability presents a direct, serious consequence to the impacted component (e.g., the attacker cannot disrupt existing connections, but can prevent new connections; the attacker can repeatedly exploit a vulnerability that, in each instance of a successful attack, leaks a only small amount of memory, but after repeated exploitation causes a service to become completely unavailable).
- Exploit Code Maturity: Unproven
- No exploit code is available, or an exploit is theoretical.
- Remediation Level: Official Fix
- A complete vendor solution is available. Either the vendor has issued an official patch, or an upgrade is available.
- Report Confidence: Confirmed
- Detailed reports exist, or functional reproduction is possible (functional exploits may provide this). Source code is available to independently verify the assertions of the research, or the author or vendor of the affected code has confirmed the presence of the vulnerability.
Definitions: FIRST CVSS v3.1 specification.
Exploitation evidence
Disclosed: evidence found.
CVE published 13 Jan 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponized: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors
A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 20 Nov 2026.
- Disclosed
- The CVE record is public on cve.org. Its publication is t = 0.
- Detectable
- A public nuclei template can find exposed instances, for defenders and attackers alike.
- Weaponized
- A Metasploit exploit module or Exploit-DB entry exists (Metasploit scanner modules do not count), or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
- Exploited in the wild
- CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
- Observed by OffSeq Mirage
- OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.
Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.
What to do
Upgrade Azure Core shared client library for Python to 1.38.0.
Affected software
| Product | Affected | Fixed in |
|---|---|---|
| MicrosoftAzure Core shared client library for Python | Affected
| Fixed in
|
PyPIazure-corepkg:pypi/azure-coreOther threats | Affected
| Fixed in– |
Check your own hosts for these packages with threat-finder (opens in a new tab), our free open-source scanner.
AI-suggested
Red Hat recommends applying the container release update for Ansible Automation Platform 2.6 after ensuring all previously released errata relevant to the system have been applied. Detailed upgrade instructions are available in the official Red Hat documentation. Applying this update will mitigate the identified vulnerabilities.
Description
Red Hat Ansible Automation Platform 2.6 received a container release update addressing multiple security issues. The platform enables enterprise IT automation management and sharing of automation content. This update fixes numerous vulnerabilities identified by various CVEs and bugzilla reports.
Impact
The vulnerabilities fixed in this update could potentially allow attackers to exploit weaknesses in the Ansible Automation Platform, leading to unauthorized actions or privilege escalation. The advisory categorizes the severity as high, indicating significant risk if unpatched. However, no known exploits in the wild have been reported at this time.
Summary
Red Hat issued a security advisory for Red Hat Ansible Automation Platform 2.6 container release update, which includes fixes for a broad set of vulnerabilities affecting the platform. The advisory references many CVEs and bugzilla entries, indicating a comprehensive patch addressing issues such as improper input validation, privilege escalation, and other security weaknesses. The update is intended to improve the security posture of the automation platform by mitigating these vulnerabilities.
- CWE-502Deserialization of Untrusted Data (opens in a new tab)
Base weaknessLikelihood of exploit: MediumCWE Top 25 (2025): #15OWASP Top 10 A08:2025: Software or Data Integrity Failures (opens in a new tab)
The product deserializes untrusted data without sufficiently ensuring that the resulting data will be valid.
Architecture and Design · Implementation
If available, use the signing/sealing features of the programming language to assure that deserialized data has not been tainted. For example, a hash-based message authentication code (HMAC) could be used to ensure that data has not been modified.
Implementation
When deserializing data, populate a new object rather than just deserializing. The result is that the data flows through safe input validation and that the functions are safe.
Implementation
Explicitly define a final object() to prevent deserialization.
- OWASP Cheat Sheets
- Attack patterns
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-772Missing Release of Resource after Effective Lifetime (opens in a new tab)
Base weaknessLikelihood of exploit: High
The product does not release a resource after its effective lifetime has ended, i.e., after the resource is no longer needed.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Implementation
It is good practice to be responsible for freeing all resources you allocate and to be consistent with how and where you free resources in a function. If you allocate resources that you intend to free upon completion of the function, you must be sure to free the resources at all exit points for that function including…
Operation · Architecture and Design · Resource Limitation
Use resource-limiting settings provided by the operating system or environment. For example, when managing system resources in POSIX, setrlimit() can be used to set limits for certain types of resources, and getrlimit() can determine how many resources are available.
- Attack patterns
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-427Uncontrolled Search Path Element (opens in a new tab)
Base weaknessOWASP Top 10 A08:2025: Software or Data Integrity Failures (opens in a new tab)
The product uses a fixed or controlled search path to find resources, but one or more locations in that path can be under the control of unintended actors.
Architecture and Design · Implementation · Attack Surface Reduction
Hard-code the search path to a set of known-safe values (such as system directories), or only allow them to be specified by the administrator in a configuration file. Do not allow these settings to be modified by an external party. Be careful to avoid related weaknesses such as CWE-426 and CWE-428.
Implementation · Attack Surface Reduction
When invoking other programs, specify those programs using fully-qualified pathnames. While this is an effective approach, code that uses fully-qualified pathnames might not be portable to other systems that do not use the same pathnames.
Implementation · Attack Surface Reduction
Remove or restrict all environment settings before invoking other programs. This includes the PATH environment variable, LD_LIBRARY_PATH, and other settings that identify the location of code libraries, and any application-specific search paths.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-770Allocation of Resources Without Limits or Throttling (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #25
The product allocates a reusable resource or group of resources on behalf of an actor without imposing any intended restrictions on the size or number of resources that can be allocated.
Requirements
Clearly specify the minimum and maximum expectations for capabilities, and dictate which behaviors are acceptable when resource allocation reaches limits.
Architecture and Design
Limit the amount of resources that are accessible to unprivileged users. Set per-user limits for resources. Allow the system administrator to define these limits. Be careful to avoid CWE-410.
Architecture and Design
Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-606Unchecked Input for Loop Condition (opens in a new tab)
Base weakness
The product does not properly check inputs that are used for loop conditions, potentially leading to a denial of service or other consequences because of excessive looping.
Implementation
Do not use user-controlled data for loop conditions.
Implementation
Perform input validation.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-125Out-of-bounds Read (opens in a new tab)
Base weaknessCWE Top 25 (2025): #8
The product reads data past the end, or before the beginning, of the intended buffer.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Architecture and Design · Language Selection
Use a language that provides appropriate memory abstractions.
- OWASP Cheat Sheets
- Attack patterns
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-787Out-of-bounds Write (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #5
The product writes data past the end, or before the beginning, of the intended buffer.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Operation · Build and Compilation · Environment Hardening
Use automatic buffer overflow detection mechanisms that are offered by certain compilers or compiler extensions. Examples include: the Microsoft Visual Studio /GS flag, Fedora/Red Hat FORTIFY_SOURCE GCC flag, StackGuard, and ProPolice, which provide various mechanisms including canary-based detection and range/index…
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-295Improper Certificate Validation (opens in a new tab)
Base weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
The product does not validate, or incorrectly validates, a certificate.
Architecture and Design · Implementation
Certificates should be carefully managed and checked to assure that data are encrypted with the intended owner's public key.
Implementation
If certificate pinning is being used, ensure that all relevant properties of the certificate are fully validated before the certificate is pinned, including the hostname.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-347Improper Verification of Cryptographic Signature (opens in a new tab)
Base weaknessOWASP Top 10 A04:2025: Cryptographic Failures (opens in a new tab)
The product does not verify, or incorrectly verifies, the cryptographic signature for data.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-346Origin Validation Error (opens in a new tab)
Class weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
The product does not properly verify that the source of data or communication is valid.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-94Improper Control of Generation of Code (Code Injection) (opens in a new tab)
Base weaknessLikelihood of exploit: MediumCWE Top 25 (2025): #10OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product constructs all or part of a code segment using externally-influenced input from an upstream component, but it does not neutralize or incorrectly neutralizes special elements that could modify the syntax or behavior of the intended code segment.
Architecture and Design · Refactoring
Refactor your program so that you do not have to dynamically generate code.
Architecture and Design
Run your code in a "jail" or similar sandbox environment that enforces strict boundaries between the process and the operating system. This may effectively restrict which code can be executed by your product.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-835Loop with Unreachable Exit Condition (Infinite Loop) (opens in a new tab)
Base weakness
The product contains an iteration or loop with an exit condition that cannot be reached, i.e., an infinite loop.
- CWE-124Buffer Underwrite (Buffer Underrun) (opens in a new tab)
Base weaknessLikelihood of exploit: Medium
The product writes to a buffer using an index or pointer that references a memory location prior to the beginning of the buffer.
Requirements
Choose a language that is not susceptible to these issues.
Implementation
All calculated values that are used as index or for pointer arithmetic should be validated to ensure that they are within an expected range.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-1341Multiple Releases of Same Resource or Handle (opens in a new tab)
Base weakness
The product attempts to close or release a resource or handle more than once, without any successful open between the close operations.
Implementation
Change the code's logic so that the resource is only closed once. This might require simplifying or refactoring. This fix can be simple to do in small code blocks, but more difficult when multiple closes are buried within complex conditionals.
Implementation · Refactoring
It can be effective to implement a flag that is (1) set when the resource is opened, (2) cleared when it is closed, and (3) checked before closing. This approach can be useful when there are disparate cases in which closes must be performed.
Implementation · Refactoring
When closing a resource, set the resource's associated variable to NULL or equivalent value for the given language. Some APIs will ignore this null value without causing errors.
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-476NULL Pointer Dereference (opens in a new tab)
Base weaknessLikelihood of exploit: MediumCWE Top 25 (2025): #13OWASP Top 10 A10:2025: Mishandling of Exceptional Conditions (opens in a new tab)
The product dereferences a pointer that it expects to be valid but is NULL.
Implementation
For any pointers that could have been modified or provided from a function that can return NULL, check the pointer for NULL before use. When working with a multithreaded or otherwise asynchronous environment, ensure that proper locking APIs are used to lock before the check, and unlock when it has finished.
Requirements
Select a programming language that is not susceptible to these issues.
Implementation
Check the results of all functions that return a value and verify that the value is non-null before acting upon it.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-409Improper Handling of Highly Compressed Data (Data Amplification) (opens in a new tab)
Base weakness
The product does not handle or incorrectly handles a compressed input with a very high compression ratio that produces a large output.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-763Release of Invalid Pointer or Reference (opens in a new tab)
Base weakness
The product attempts to return a memory resource to the system, but it calls the wrong release function or calls the appropriate release function incorrectly.
Implementation
Only call matching memory management functions. Do not mix and match routines. For example, when you allocate a buffer with malloc(), dispose of the original pointer with free().
Implementation
When programming in C++, consider using smart pointers provided by the boost library to help correctly and consistently manage memory.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-908Use of Uninitialized Resource (opens in a new tab)
Base weaknessLikelihood of exploit: Medium
The product uses or accesses a resource that has not been initialized.
Implementation
Explicitly initialize the resource before use. If this is performed through an API function or standard procedure, follow all required steps.
Implementation
Pay close attention to complex conditionals that affect initialization, since some branches might not perform the initialization.
Implementation
Avoid race conditions (CWE-362) during initialization routines.
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-367Time-of-check Time-of-use (TOCTOU) Race Condition (opens in a new tab)
Base weaknessLikelihood of exploit: Medium
The product checks the state of a resource before using that resource, but the resource's state can change between the check and the use in a way that invalidates the results of the check.
Implementation
The most basic advice for TOCTOU vulnerabilities is to not perform a check before the use. This does not resolve the underlying issue of the execution of a function on a resource whose state and identity cannot be assured, but it does help to limit the false sense of security given by the check.
Implementation
When the file being altered is owned by the current user and group, set the effective gid and uid to that of the current user and group when executing this statement.
Architecture and Design
Limit the interleaving of operations on files from multiple processes.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-78Improper Neutralization of Special Elements used in an OS Command (OS Command Injection) (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #9OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product constructs all or part of an OS command using externally-influenced input from an upstream component, but it does not neutralize or incorrectly neutralizes special elements that could modify the intended OS command before it is sent to a downstream component.
Architecture and Design
If at all possible, use library calls rather than external processes to recreate the desired functionality.
Architecture and Design · Operation · Sandbox or Jail
Run the code in a "jail" or similar sandbox environment that enforces strict boundaries between the process and the operating system. This may effectively restrict which files can be accessed in a particular directory or which commands can be executed by the software.
Architecture and Design · Attack Surface Reduction
For any data that will be used to generate a command to be executed, keep as much of that data out of external control as possible. For example, in web applications, this may require storing the data locally in the session's state instead of sending it out to the client in a hidden form field.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-59Name not in the CWE catalogue (opens in a new tab)
- CWE-613Name not in the CWE catalogue (opens in a new tab)
- CWE-807Name not in the CWE catalogue (opens in a new tab)
- CWE-1046Name not in the CWE catalogue (opens in a new tab)
- GCVE source
- db.gcve.eu
- Csaf Category
- csaf_security_advisory
- Csaf Version
- 2.0
- Publisher
- Red Hat Product Security
- Advisory ID
- RHSA-2026:100765
- Vendor Severity
- high
- CVE Count
- 58
- Additional Cves
- CVE-2026-59951, CVE-2026-84678, CVE-2026-96640, CVE-2026-96643, CVE-2026-96644, CVE-2026-96778, CVE-2026-97687, CVE-2026-97689, CVE-2026-102266, CVE-2026-102267, CVE-2026-102271, CVE-2026-102272, CVE-2026-102273, CVE-2026-102946, CVE-2026-109527, CVE-2026-111064, CVE-2026-111066, CVE-2026-112307, CVE-2026-112390, CVE-2026-112391, CVE-2026-112392, CVE-2026-112397, CVE-2026-112399, CVE-2026-112400, CVE-2026-112402, CVE-2026-112404, CVE-2026-112405, CVE-2026-112406, CVE-2026-112892, CVE-2026-112893, CVE-2026-112894, CVE-2026-112895, CVE-2026-112896, CVE-2026-112897, CVE-2026-112940, CVE-2026-113718, CVE-2026-113722, CVE-2026-113723, CVE-2026-113725, CVE-2026-113726, CVE-2026-113732, CVE-2026-113776, CVE-2026-114096, CVE-2026-114097, CVE-2026-114098, CVE-2026-114136, CVE-2026-114137, CVE-2026-114138, CVE-2026-114605, CVE-2026-114613, CVE-2026-114615, CVE-2026-114616, CVE-2026-118669, CVE-2026-119194, CVE-2026-119195, CVE-2026-119196, CVE-2026-119197
References
- access.redhat.com/errata/RHSA-2026:100765 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-102266 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-102267 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-102271 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-102272 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-102273 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-102946 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-109527 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-111064 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-111066 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-112307 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-112390 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-112391 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-112392 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-112397 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-112399 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-112400 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-112402 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-112404 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-112405 (opens in a new tab)
Community reviews
Related threats
- Red Hat Security Advisory: Red Hat Hardened Images RPMs bug fix and enhancement updateHighVulnerability
- Red Hat Security Advisory: Red Hat Hardened Images RPMs bug fix and enhancement updateHighVulnerability
- Red Hat Security Advisory: Red Hat Hardened Images RPMs bug fix and enhancement updateHighVulnerability
- Red Hat Security Advisory: thunderbird security updateHighVulnerability
- Red Hat Security Advisory: thunderbird security updateHighVulnerability