CVE-2025-10939VulnerabilityPublished 13 Nov 2025Updated 31 Aug 2026

Red Hat Security Advisory: Red Hat build of Keycloak 26.4.4 Images Security Update

Affects Red HatSource GCVE Database

Mentioned vulnerabilities

Authoritative record:CVE-2025-10939· Low 3.7

Not known to be exploited · CVSS 3.7 Low.

Data as of 26 Oct 2026, 11:42 UTC

CVSS 3.1 base score

3.7Low

How severe the flaw is on the 0–10 CVSS scale.

EPSS: 0.4% chance of exploitation in 30 days – higher than 35% of CVEsExploit Prediction Scoring System: the likelihood attackers will use this flaw soon.

CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N

Attack Vector: Network
Attack Complexity: High
Privileges Required: None
User Interaction: None
Scope: Unchanged
Confidentiality: Low
Integrity: None
Availability: None

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable component is bound to the network stack and the set of possible attackers extends beyond the other options listed, up to and including the entire Internet. Such a vulnerability is often termed 'remotely exploitable' and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: High: A successful attack depends on conditions beyond the attacker's control. That is, a successful attack cannot be accomplished at will, but requires the attacker to invest in some measurable amount of effort in preparation or execution against the vulnerable component before a successful attack can be expected. For example, a successful attack may require an attacker to: gather knowledge about the environment in which the vulnerable target/component exists; prepare the target environment to improve exploit reliability; or inject themselves into the logical network path between the target and the resource requested by the victim in order to read and/or modify network communications (e.g., a man in the middle attack).
Privileges Required: None: The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files to carry out an attack.
User Interaction: None: The vulnerable system can be exploited without any interaction from any user.
Scope: Unchanged: An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
Confidentiality: Low: There is some loss of confidentiality. Access to some restricted information is obtained, but the attacker does not have control over what information is obtained, or the amount or kind of loss is limited. The information disclosure does not cause a direct, serious loss to the impacted component.
Integrity: None: There is no loss of integrity within the impacted component.
Availability: None: There is no impact to availability within the impacted component.

Definitions: FIRST CVSS v3.1 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 28 Oct 2025
Detectable: no evidence on record.
No public nuclei template indexed
Weaponised: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 26 Oct 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponised: Public exploit code exists in Metasploit or Exploit-DB, or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

Affected software

Product	Affected	Fixed in
Red Hat Product Security Red Hat	Affected >=26.4.0 <=26.4.4	Fixed in–

AI-suggested

Red Hat has released updated images for Red Hat build of Keycloak 26.4.4 that address these vulnerabilities. Users should back up existing installations including applications, configurations, and databases before applying the update. Deploying the updated Keycloak 26.4.4 images within OpenShift Container Platform will mitigate these security issues. No additional vendor advisories indicate alternative mitigations or that no action is required.

Description

Red Hat has released security updates for the Red Hat build of Keycloak 26.4.4 images used within OpenShift Container Platform. The update addresses multiple vulnerabilities including improper access restriction to the admin console, debug bind address exposure, offline session refresh issues, WebAuthn attestation verification bypass, and offline session takeover due to reused authentication session IDs. These issues affect the authentication server functionality used for centralized login and user management in containerized environments.

Impact

The vulnerabilities collectively could allow unauthorized access to the admin console, session hijacking, bypass of WebAuthn attestation verification, and improper session refresh capabilities. This may lead to unauthorized administrative actions, session takeover, and weakening of authentication guarantees in environments using Red Hat build of Keycloak 26.4.4. The impact is moderate given the scope of affected components and the nature of the issues.

CWE-427Uncontrolled Search Path Element (opens in a new tab)
Base weaknessOWASP Top 10 A08:2025: Software or Data Integrity Failures (opens in a new tab)
The product uses a fixed or controlled search path to find resources, but one or more locations in that path can be under the control of unintended actors.
Architecture and Design · Implementation · Attack Surface Reduction
Hard-code the search path to a set of known-safe values (such as system directories), or only allow them to be specified by the administrator in a configuration file. Do not allow these settings to be modified by an external party. Be careful to avoid related weaknesses such as CWE-426 and CWE-428.
Implementation · Attack Surface Reduction
When invoking other programs, specify those programs using fully-qualified pathnames. While this is an effective approach, code that uses fully-qualified pathnames might not be portable to other systems that do not use the same pathnames.
Implementation · Attack Surface Reduction
Remove or restrict all environment settings before invoking other programs. This includes the PATH environment variable, LD_LIBRARY_PATH, and other settings that identify the location of code libraries, and any application-specific search paths.
OWASP Cheat Sheets
Software Supply Chain Security (opens in a new tab)
Infrastructure as Code (opens in a new tab)
Attack patterns
Leveraging/Manipulating Configuration File Search Paths (opens in a new tab)
Search Order Hijacking (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-1327Binding to an Unrestricted IP Address (opens in a new tab)
Base weakness
The product assigns the address 0.0.0.0 for a database server, a cloud service/instance, or any computing resource that communicates remotely.
System Configuration
Assign IP addresses that are not 0.0.0.0.
System Configuration · Firewall
Unwanted connections to the configured server may be denied through a firewall or other packet filtering measures.
Attack patterns
Accessing Functionality Not Properly Constrained by ACLs (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-613Insufficient Session Expiration (opens in a new tab)
Base weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
According to WASC, "Insufficient Session Expiration is when a web site permits an attacker to reuse old session credentials or session IDs for authorization."
Implementation
Set sessions/credentials expiration date.
OWASP Cheat Sheets
OWASP Authentication (opens in a new tab)
OWASP ASVS 4.0.3
V2.8.1 (opens in a new tab)
V2.8.6 (opens in a new tab)
V3.6.1 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-347Improper Verification of Cryptographic Signature (opens in a new tab)
Base weaknessOWASP Top 10 A04:2025: Cryptographic Failures (opens in a new tab)
The product does not verify, or incorrectly verifies, the cryptographic signature for data.
OWASP Cheat Sheets
XML Security (opens in a new tab)
REST Security (opens in a new tab)
JSON Web Token for Java (opens in a new tab)
REST Assessment (opens in a new tab)
Cross-Site Request Forgery Prevention (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.2 (opens in a new tab)
V3.5.3 (opens in a new tab)
V13.2.6 (opens in a new tab)
Attack patterns
Padding Oracle Crypto Attack (opens in a new tab)
Signature Spoofing by Improper Validation (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-384Session Fixation (opens in a new tab)
Compound weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
Authenticating a user, or otherwise establishing a new user session, without invalidating any existing session identifier gives an attacker the opportunity to steal authenticated sessions.
Architecture and Design
Invalidate any existing session identifiers prior to authorizing a new user session.
Architecture and Design
For platforms such as ASP that do not generate new values for sessionid cookies, utilize a secondary cookie. In this approach, set a secondary cookie on the user's browser to a random value and set a session variable to the same value.
Operation · Firewall
Use an application firewall that can detect attacks against this weakness. It can be beneficial in cases in which the code cannot be fixed (because it is controlled by a third party), as an emergency prevention measure while more comprehensive software assurance measures are applied, or to provide defense in depth.
OWASP Cheat Sheets
Session Management (opens in a new tab)
OWASP Authentication (opens in a new tab)
OWASP ASVS 4.0.3
V3.2.1 (opens in a new tab)
Attack patterns
Session Credential Falsification through Forging (opens in a new tab)
Accessing/Intercepting/Modifying HTTP Cookies (opens in a new tab)
Manipulating Opaque Client-based Data Tokens (opens in a new tab)
Session Credential Falsification through Prediction (opens in a new tab)
Reusing Session IDs (aka Session Replay) (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Affected software

Description

AI analysisMachine-generated, updated 17 Sep 2026, 22:48 UTC

WeaknessesCWE-427, CWE-1327, CWE-613 +2

Technical details

References

Community reviews

Related threats