CVE-2026-6860VulnerabilityPublished 25 Jun 2026Updated 5 Nov 2026

Red Hat Security Advisory: Red Hat build of Keycloak 26.6.4 Images Security Update

Affects Red HatSource GCVE Database

Compare

Mentioned vulnerabilities

Authoritative record:CVE-2026-6860· Medium 6.9

Not known to be exploited · CVSS 6.9 Medium.

Data as of 5 Nov 2026, 22:34 UTC

CVSS 4.0 base score

6.9Medium

How severe the flaw is on the 0–10 CVSS scale.

CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:L/SC:N/SI:N/SA:L

Attack Vector: Network
Attack Complexity: Low
Attack Requirements: None
Privileges Required: None
User Interaction: None
Vulnerable system confidentiality: None
Vulnerable system integrity: None
Vulnerable system availability: Low
Subsequent system confidentiality: None
Subsequent system integrity: None
Subsequent system availability: Low

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable system is bound to the network stack and the set of possible attackers extends beyond the other options listed below, up to and including the entire Internet. Such a vulnerability is often termed “remotely exploitable” and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: Low: The attacker must take no measurable action to exploit the vulnerability. The attack requires no target-specific circumvention to exploit the vulnerability. An attacker can expect repeatable success against the vulnerable system.
Attack Requirements: None: The successful attack does not depend on the deployment and execution conditions of the vulnerable system. The attacker can expect to be able to reach the vulnerability and execute the exploit under all or most instances of the vulnerability.
Privileges Required: None: The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files of the vulnerable system to carry out an attack.
User Interaction: None: The vulnerable system can be exploited without interaction from any human user, other than the attacker.
Vulnerable system confidentiality: None: There is no loss of confidentiality within the Vulnerable System.
Vulnerable system integrity: None: There is no loss of integrity within the Vulnerable System.
Vulnerable system availability: Low: Performance is reduced or there are interruptions in resource availability. Even if repeated exploitation of the vulnerability is possible, the attacker does not have the ability to completely deny service to legitimate users. The resources in the Vulnerable System are either partially available all of the time, or fully available only some of the time, but overall there is no direct, serious consequence to the Vulnerable System.
Subsequent system confidentiality: None: There is no loss of confidentiality within the Subsequent System or all confidentiality impact is constrained to the Vulnerable System.
Subsequent system integrity: None: There is no loss of integrity within the Subsequent System or all integrity impact is constrained to the Vulnerable System.
Subsequent system availability: Low: Performance is reduced or there are interruptions in resource availability. Even if repeated exploitation of the vulnerability is possible, the attacker does not have the ability to completely deny service to legitimate users. The resources in the Subsequent System are either partially available all of the time, or fully available only some of the time, but overall there is no direct, serious consequence to the Subsequent System.

Definitions: FIRST CVSS v4.0 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 6 May 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponized: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 5 Nov 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponized: A Metasploit exploit module or Exploit-DB entry exists (Metasploit scanner modules do not count), or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

Affected software

Product	Affected	Fixed in
Eclipse FoundationEclipse Vert.x	Affected >=4.3.4 <=4.5.26 >=5.0.0 <=5.0.11	Fixed in–

Description

Red Hat build of Keycloak is an integrated sign-on solution, available as a Red Hat JBoss Middleware for OpenShift containerized image. The Red Hat build of Keycloak for OpenShift image provides an authentication server that you can use to log in centrally, log out, and register. You can also manage user accounts for web applications, mobile applications, and RESTful web services. Red Hat build of Keycloak Operator for OpenShift simplifies deployment and management of Keycloak 26.6.4 clusters. This erratum releases new images for Red Hat build of Keycloak 26.6.4 for use within the OpenShift Container Platform cloud computing Platform-as-a-Service (PaaS) for on-premise or private cloud deployments, aligning with the standalone product release. Security fixes: * Information disclosure via CORS header injection due to unvalidated JWT azp claim (CVE-2026-37977) * Server-Side Request Forgery via OIDC token endpoint manipulation (CVE-2026-4874) * eclipse-vertx/vert.x: Denial of Service via TLS handshake with wildcard server name (CVE-2026-6860) * Improper Access Control on Keycloak Server when the account Account API feature is disabled (CVE-2026-7500) * Policy bypass during WebAuthn credential registration via client-side JavaScript manipulation (CVE-2026-8830) * Security flaw in org.keycloak/keycloak-services (CVE-2026-8922) * Information disclosure through arbitrary filesystem path probing (CVE-2026-9083) * Cross-site scripting (XSS) via case-insensitive URI validation bypass (CVE-2026-9086) * Cross-Session Email Verification Proof Not Bound to Upstream Identity in First-Broker-Login (CVE-2026-9087) * Information disclosure due to user profile permission bypass (CVE-2026-9088) * Group-Admin Escalation to Realm-Admin (CVE-2026-9099) * Privilege escalation due to oversized subject_token JWT (CVE-2026-9704) * Attacker can re-enable and take over disabled clients via Registration Access Token (CVE-2026-9705) * Organization Data Leak After Feature Disabled in Keycloak (CVE-2026-9791) * Security restriction bypass allows unauthorized ROPC token acquisition (CVE-2026-9792) * Information disclosure via SAML ECP endpoint (CVE-2026-9794) * Privilege escalation via improper scope mapping enforcement (CVE-2026-9795) * Unauthorized access to resources via UMA permission ticket bypass (CVE-2026-9799) * Authorization bypass via incorrect URI comparison (CVE-2026-9800) * Denial of Service via malformed LDAP password policy response (CVE-2026-9801) * Unauthorized account access via replayed refresh tokens after cluster restart (CVE-2026-9802) * Denial of Service via malformed Authorization header (CVE-2026-9803)

CWE-770Allocation of Resources Without Limits or Throttling (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #25
The product allocates a reusable resource or group of resources on behalf of an actor without imposing any intended restrictions on the size or number of resources that can be allocated.
Requirements
Clearly specify the minimum and maximum expectations for capabilities, and dictate which behaviors are acceptable when resource allocation reaches limits.
Architecture and Design
Limit the amount of resources that are accessible to unprivileged users. Set per-user limits for resources. Allow the system administrator to define these limits. Be careful to avoid CWE-410.
Architecture and Design
Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended.
OWASP Cheat Sheets
Abuse Case (opens in a new tab)
OWASP ASVS 4.0.3
V8.1.4 (opens in a new tab)
V13.4.1 (opens in a new tab)
V11.1.4 (opens in a new tab)
Attack patterns
XML Ping of the Death (opens in a new tab)
Exponential Data Expansion (opens in a new tab)
Serialized Data Parameter Blowup (opens in a new tab)
Serialized Data with Nested Payloads (opens in a new tab)
Oversized Serialized Data Payloads (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-22Improper Limitation of a Pathname to a Restricted Directory (Path Traversal) (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #6OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product uses external input to construct a pathname that is intended to identify a file or directory that is located underneath a restricted parent directory, but the product does not properly neutralize special elements within the pathname that can cause the pathname to resolve to a location that is outside of the restricted directory.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Architecture and Design
For any security checks that are performed on the client side, ensure that these checks are duplicated on the server side, in order to avoid CWE-602. Attackers can bypass the client-side checks by modifying values after the checks have been performed, or by changing the client to remove the client-side checks…
Implementation · Input Validation
Inputs should be decoded and canonicalized to the application's current internal representation before being validated (CWE-180). Make sure that the application does not decode the same input twice (CWE-174).
OWASP Cheat Sheets
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V12.3.1 (opens in a new tab)
Attack patterns
Path Traversal (opens in a new tab)
Using Slashes and URL Encoding Combined to Bypass Validation Logic (opens in a new tab)
Manipulating Web Input to File System Calls (opens in a new tab)
Using Escaped Slashes in Alternate Encoding (opens in a new tab)
Using Slashes in Alternate Encoding (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-79Improper Neutralization of Input During Web Page Generation (Cross-site Scripting) (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #1OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product does not neutralize or incorrectly neutralizes user-controllable input before it is placed in output that is used as a web page that is served to other users.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Implementation · Architecture and Design
Understand the context in which your data will be used and the encoding that will be expected. This is especially important when transmitting data between different components, or when generating outputs that can contain multiple encodings at the same time, such as web pages or multi-part mail messages.
Architecture and Design · Implementation · Attack Surface Reduction
Understand all the potential areas where untrusted inputs can enter your software: parameters or arguments, cookies, anything read from the network, environment variables, reverse DNS lookups, query results, request headers, URL components, e-mail, files, filenames, databases, and any external systems that provide…
OWASP Cheat Sheets
Cross Site Scripting Prevention (opens in a new tab)
DOM based XSS Prevention (opens in a new tab)
Injection Prevention (opens in a new tab)
Abuse Case (opens in a new tab)
Deserialization (opens in a new tab)
OWASP ASVS 4.0.3
V5.3.3 (opens in a new tab)
V1.5.1 (opens in a new tab)
Attack patterns
XSS Using MIME Type Mismatch (opens in a new tab)
DOM-Based XSS (opens in a new tab)
Reflected XSS (opens in a new tab)
Stored XSS (opens in a new tab)
Cross-Site Scripting (XSS) (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-639Authorization Bypass Through User-Controlled Key (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #24OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The system's authorization functionality does not prevent one user from gaining access to another user's data or record by modifying the key value identifying the data.
Architecture and Design
For each and every data access, ensure that the user has sufficient privilege to access the record that is being requested.
Architecture and Design · Implementation
Make sure that the key that is used in the lookup of a specific user's record is not controllable externally by the user or that any tampering can be detected.
Architecture and Design
Use encryption in order to make it more difficult to guess other legitimate values of the key or associate a digital signature with the key so that the server can verify that there has been no tampering.
OWASP Cheat Sheets
Access Control (opens in a new tab)
Authorization Testing Automation (opens in a new tab)
Cross-Site Request Forgery Prevention (opens in a new tab)
Insecure Direct Object Reference Prevention (opens in a new tab)
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V4.1.2 (opens in a new tab)
V4.2.1 (opens in a new tab)
V8.3.8 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-613DEPRECATED: Insufficient Session Expiration (opens in a new tab)
Base weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
This entry has been deprecated because it was insufficiently clear. Consider CWE-1462 and its descendants.
MITRE does not allow mapping vulnerabilities to this entry; it groups weaknesses rather than naming one.
OWASP Cheat Sheets
OWASP Authentication (opens in a new tab)
OWASP ASVS 4.0.3
V2.8.1 (opens in a new tab)
V2.8.6 (opens in a new tab)
V3.6.1 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-266Incorrect Privilege Assignment (opens in a new tab)
Base weaknessOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
A product incorrectly assigns a privilege to a particular actor, creating an unintended sphere of control for that actor.
Architecture and Design · Operation
Very carefully manage the setting, management, and handling of privileges. Explicitly manage trust zones in the software.
Architecture and Design · Operation · Environment Hardening
Run your code using the lowest privileges that are required to accomplish the necessary tasks. If possible, create isolated accounts with limited privileges that are only used for a single task. That way, a successful attack will not immediately give the attacker access to the rest of the software or its environment.
OWASP Cheat Sheets
Docker Security (opens in a new tab)
Third Party Javascript Management (opens in a new tab)
Virtual Patching (opens in a new tab)
Secure Design Principles (opens in a new tab)
OWASP ASVS 4.0.3
V1.4.4 (opens in a new tab)
V1.4.5 (opens in a new tab)
V1.10.1 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-1025Comparison Using Wrong Factors (opens in a new tab)
Class weakness
The code performs a comparison between two entities, but the comparison examines the wrong factors or characteristics of the entities.
CWE-347Improper Verification of Cryptographic Signature (opens in a new tab)
Base weaknessOWASP Top 10 A04:2025: Cryptographic Failures (opens in a new tab)
The product does not verify, or incorrectly verifies, the cryptographic signature for data.
OWASP Cheat Sheets
XML Security (opens in a new tab)
REST Security (opens in a new tab)
JSON Web Token for Java (opens in a new tab)
REST Assessment (opens in a new tab)
Cross-Site Request Forgery Prevention (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.2 (opens in a new tab)
V3.5.3 (opens in a new tab)
V13.2.6 (opens in a new tab)
Attack patterns
Padding Oracle Crypto Attack (opens in a new tab)
Signature Spoofing by Improper Validation (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Affected software

Description

WeaknessesCWE-770, CWE-22, CWE-79 +5

Technical details

References

Community reviews

Related threats