CVE-2026-6860VulnerabilityPublished 17 Jun 2026Updated 22 Oct 2026

Red Hat Security Advisory: Red Hat build of Quarkus 3.33.2.SP1 security update

Affects Red HatSource GCVE Database

Mentioned vulnerabilities

Authoritative record:CVE-2026-6860· Medium 6.9

Not known to be exploited · CVSS 6.9 Medium.

Data as of 26 Oct 2026, 17:16 UTC

CVSS 4.0 base score

6.9Medium

How severe the flaw is on the 0–10 CVSS scale.

EPSS: 0.2% chance of exploitation in 30 days – higher than 14% of CVEsExploit Prediction Scoring System: the likelihood attackers will use this flaw soon.

CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:L/SC:N/SI:N/SA:L

Attack Vector: Network
Attack Complexity: Low
Attack Requirements: None
Privileges Required: None
User Interaction: None
Vulnerable system confidentiality: None
Vulnerable system integrity: None
Vulnerable system availability: Low
Subsequent system confidentiality: None
Subsequent system integrity: None
Subsequent system availability: Low

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable system is bound to the network stack and the set of possible attackers extends beyond the other options listed below, up to and including the entire Internet. Such a vulnerability is often termed “remotely exploitable” and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: Low: The attacker must take no measurable action to exploit the vulnerability. The attack requires no target-specific circumvention to exploit the vulnerability. An attacker can expect repeatable success against the vulnerable system.
Attack Requirements: None: The successful attack does not depend on the deployment and execution conditions of the vulnerable system. The attacker can expect to be able to reach the vulnerability and execute the exploit under all or most instances of the vulnerability.
Privileges Required: None: The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files of the vulnerable system to carry out an attack.
User Interaction: None: The vulnerable system can be exploited without interaction from any human user, other than the attacker.
Vulnerable system confidentiality: None: There is no loss of confidentiality within the Vulnerable System.
Vulnerable system integrity: None: There is no loss of integrity within the Vulnerable System.
Vulnerable system availability: Low: Performance is reduced or there are interruptions in resource availability. Even if repeated exploitation of the vulnerability is possible, the attacker does not have the ability to completely deny service to legitimate users. The resources in the Vulnerable System are either partially available all of the time, or fully available only some of the time, but overall there is no direct, serious consequence to the Vulnerable System.
Subsequent system confidentiality: None: There is no loss of confidentiality within the Subsequent System or all confidentiality impact is constrained to the Vulnerable System.
Subsequent system integrity: None: There is no loss of integrity within the Subsequent System or all integrity impact is constrained to the Vulnerable System.
Subsequent system availability: Low: Performance is reduced or there are interruptions in resource availability. Even if repeated exploitation of the vulnerability is possible, the attacker does not have the ability to completely deny service to legitimate users. The resources in the Subsequent System are either partially available all of the time, or fully available only some of the time, but overall there is no direct, serious consequence to the Subsequent System.

Definitions: FIRST CVSS v4.0 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 6 May 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponised: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 26 Oct 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponised: Public exploit code exists in Metasploit or Exploit-DB, or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

Affected software

Product	Affected	Fixed in
Eclipse FoundationEclipse Vert.x	Affected >=4.3.4 <=4.5.26 >=5.0.0 <=5.0.11	Fixed in–

Description

This release of Red Hat build of Quarkus 3.33.2.SP1 includes the following CVE fixes: * quarkus-vertx-http: Authentication/Authorization Bypass via Advanced Path Normalization Vulnerabilities [quarkus-3.33] (CVE-2026-50559) * vertx-core: eclipse-vertx/vert.x: Denial of Service via TLS handshake with wildcard server name [quarkus-3.33] (CVE-2026-6860) * netty-handler: netty-handler: IPv6 subnet rule bypass due to incorrect masking operation [quarkus-3.33] (CVE-2026-44249) * netty-codec-haproxy: Netty-codec-haproxy: Denial of Service via malformed HAProxy message [quarkus-3.33] (CVE-2026-44893) * netty-codec-http2: netty-codec-http2: Denial of Service due to resource leak [quarkus-3.33] (CVE-2026-48043) * netty-codec-haproxy: Netty HAProxy PROXY protocol v2 codec: Denial of Service via memory leak from crafted PROXY protocol headers [quarkus-3.33] (CVE-2026-48059) * netty-resolver-dns: Netty has Insufficient Bailiwick Validation for NS Records [quarkus-3.33] (CVE-2026-47691) * netty-handler: Netty: Improper trust manager handling leads to hostname verification bypass [quarkus-3.33] (CVE-2026-50010) * netty-codec-http: Netty: Data manipulation via request-boundary confusion in HttpObjectDecoder [quarkus-3.33] (CVE-2026-50020) * netty-resolver-dns: Netty: Information disclosure and data manipulation due to improper CNAME record validation [quarkus-3.33] (CVE-2026-45674) * netty-handler: Netty: Denial of Service due to eager buffer allocation in TLS handshake [quarkus-3.33] (CVE-2026-45416) * netty-codec-http2: Netty: Denial of Service due to HTTP/2 max header size handling [quarkus-3.33] (CVE-2026-50560) * netty-codec-http2: Netty: Denial of Service via uncontrolled HTTP/2 concurrent streams [quarkus-3.33] (CVE-2026-47244) * netty-resolver-dns: Netty DNS resolver: DNS Cache Poisoning via predictable transaction IDs [quarkus-3.33] (CVE-2026-45673) For more information, see the release notes page listed in the References section.

CWE-770Allocation of Resources Without Limits or Throttling (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #25
The product allocates a reusable resource or group of resources on behalf of an actor without imposing any intended restrictions on the size or number of resources that can be allocated.
Requirements
Clearly specify the minimum and maximum expectations for capabilities, and dictate which behaviors are acceptable when resource allocation reaches limits.
Architecture and Design
Limit the amount of resources that are accessible to unprivileged users. Set per-user limits for resources. Allow the system administrator to define these limits. Be careful to avoid CWE-410.
Architecture and Design
Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended.
OWASP Cheat Sheets
Abuse Case (opens in a new tab)
OWASP ASVS 4.0.3
V8.1.4 (opens in a new tab)
V13.4.1 (opens in a new tab)
V11.1.4 (opens in a new tab)
Attack patterns
XML Ping of the Death (opens in a new tab)
Exponential Data Expansion (opens in a new tab)
Serialized Data Parameter Blowup (opens in a new tab)
Serialized Data with Nested Payloads (opens in a new tab)
Oversized Serialized Data Payloads (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-1287Improper Validation of Specified Type of Input (opens in a new tab)
Base weakness
The product receives input that is expected to be of a certain type, but it does not validate or incorrectly validates that the input is actually of the expected type.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-805Buffer Access with Incorrect Length Value (opens in a new tab)
Base weaknessLikelihood of exploit: High
The product uses a sequential operation to read or write a buffer, but it uses an incorrect length value that causes it to access memory that is outside of the bounds of the buffer.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Operation · Build and Compilation · Environment Hardening
Use automatic buffer overflow detection mechanisms that are offered by certain compilers or compiler extensions. Examples include: the Microsoft Visual Studio /GS flag, Fedora/Red Hat FORTIFY_SOURCE GCC flag, StackGuard, and ProPolice, which provide various mechanisms including canary-based detection and range/index…
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
Attack patterns
Overflow Buffers (opens in a new tab)
SOAP Array Overflow (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-1241Use of Predictable Algorithm in Random Number Generator (opens in a new tab)
Base weaknessOWASP Top 10 A04:2025: Cryptographic Failures (opens in a new tab)
The device uses an algorithm that is predictable and generates a pseudo-random number.
Architecture and Design
It is highly recommended to use a true random number generator (TRNG) to ensure the security of encryption schemes. Hardware-based TRNGs generate unpredictable, unbiased, and independent random numbers because they employ physical phenomena, e.g., electrical noise, as sources to generate random numbers.
Implementation
It is highly recommended to use a true random number generator (TRNG) to ensure the security of encryption schemes. Hardware-based TRNGs generate unpredictable, unbiased, and independent random numbers because they employ physical phenomena, e.g., electrical noise, as sources to generate random numbers.
OWASP Cheat Sheets
Forgot Password (opens in a new tab)
Transport Layer Protection (opens in a new tab)
User Privacy Protection (opens in a new tab)
Password Storage (opens in a new tab)
Cryptographic Storage (opens in a new tab)
OWASP ASVS 4.0.3
V2.3.1 (opens in a new tab)
V2.6.2 (opens in a new tab)
V2.7.6 (opens in a new tab)
Attack patterns
Cryptanalysis (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-346Origin Validation Error (opens in a new tab)
Class weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
The product does not properly verify that the source of data or communication is valid.
OWASP Cheat Sheets
OWASP Authentication (opens in a new tab)
OWASP ASVS 4.0.3
V14.5.2 (opens in a new tab)
V14.5.3 (opens in a new tab)
V1.4.4 (opens in a new tab)
Attack patterns
JSON Hijacking (aka JavaScript Hijacking) (opens in a new tab)
Cache Poisoning (opens in a new tab)
DNS Cache Poisoning (opens in a new tab)
Exploit Script-Based APIs (opens in a new tab)
Application API Message Manipulation via Man-in-the-Middle (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-772Missing Release of Resource after Effective Lifetime (opens in a new tab)
Base weaknessLikelihood of exploit: High
The product does not release a resource after its effective lifetime has ended, i.e., after the resource is no longer needed.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Implementation
It is good practice to be responsible for freeing all resources you allocate and to be consistent with how and where you free resources in a function. If you allocate resources that you intend to free upon completion of the function, you must be sure to free the resources at all exit points for that function including…
Operation · Architecture and Design · Resource Limitation
Use resource-limiting settings provided by the operating system or environment. For example, when managing system resources in POSIX, setrlimit() can be used to set limits for certain types of resources, and getrlimit() can determine how many resources are available.
Attack patterns
HTTP DoS (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-1286Improper Validation of Syntactic Correctness of Input (opens in a new tab)
Base weakness
The product receives input that is expected to be well-formed - i.e., to comply with a certain syntax - but it does not validate or incorrectly validates that the input complies with the syntax.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
Attack patterns
SQL Injection (opens in a new tab)
NoSQL Injection (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-347Improper Verification of Cryptographic Signature (opens in a new tab)
Base weaknessOWASP Top 10 A04:2025: Cryptographic Failures (opens in a new tab)
The product does not verify, or incorrectly verifies, the cryptographic signature for data.
OWASP Cheat Sheets
XML Security (opens in a new tab)
REST Security (opens in a new tab)
JSON Web Token for Java (opens in a new tab)
REST Assessment (opens in a new tab)
Cross-Site Request Forgery Prevention (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.2 (opens in a new tab)
V3.5.3 (opens in a new tab)
V13.2.6 (opens in a new tab)
Attack patterns
Padding Oracle Crypto Attack (opens in a new tab)
Signature Spoofing by Improper Validation (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-444Inconsistent Interpretation of HTTP Requests ('HTTP Request/Response Smuggling') (opens in a new tab)
Base weaknessOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The product acts as an intermediary HTTP agent (such as a proxy or firewall) in the data flow between two entities such as a client and server, but it does not interpret malformed HTTP requests or responses in ways that are consistent with how the messages will be processed by those entities that are at the ultimate destination.
Implementation
Use a web server that employs a strict HTTP parsing procedure, such as Apache.
Implementation
Use only SSL communication.
Implementation
Terminate the client session after each request.
OWASP Cheat Sheets
REST Assessment (opens in a new tab)
REST Security (opens in a new tab)
Cross-Site Request Forgery Prevention (opens in a new tab)
Secure Design Principles (opens in a new tab)
OWASP ASVS 4.0.3
V13.2.5 (opens in a new tab)
Attack patterns
HTTP Response Smuggling (opens in a new tab)
HTTP Request Smuggling (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-551Incorrect Behavior Order: Authorization Before Parsing and Canonicalization (opens in a new tab)
Base weakness
If a web server does not fully parse requested URLs before it examines them for authorization, it may be possible for an attacker to bypass authorization protection.
Architecture and Design
URL Inputs should be decoded and canonicalized to the application's current internal representation before being validated and processed for authorization. Make sure that your application does not decode the same input twice.
OWASP ASVS 4.0.3
V8.3.8 (opens in a new tab)
V13.4.2 (opens in a new tab)
V7.2.2 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Affected software

Description

WeaknessesCWE-770, CWE-1287, CWE-805 +7

Technical details

References

Community reviews

Related threats