CVE-2026-15577VulnerabilityPublished 19 Oct 2026Updated 29 Oct 2026

Red Hat Security Advisory: Red Hat Hardened Images RPMs bug fix and enhancement update

Affects Red HatSource GCVE Database

Compare

Authoritative record:CVE-2026-15577· Medium 6.5

Not known to be exploited · CVSS 6.5 Medium · fixed in Red Hat package updates : update Red Hat when convenient.

Data as of 29 Oct 2026, 10:37 UTC

CVSS 3.1 base score

6.5Medium

How severe the flaw is on the 0–10 CVSS scale.

EPSS: 0.2% chance of exploitation in 30 days – higher than 19% of CVEsExploit Prediction Scoring System: the likelihood attackers will use this flaw soon.
Patch: Available – fixed in 13.2.4, 13.1.8, 13.0.11 +1

CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:N

Attack Vector: Network
Attack Complexity: Low
Privileges Required: Low
User Interaction: None
Scope: Unchanged
Confidentiality: None
Integrity: High
Availability: None

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable component is bound to the network stack and the set of possible attackers extends beyond the other options listed, up to and including the entire Internet. Such a vulnerability is often termed 'remotely exploitable' and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: Low: Specialized access conditions or extenuating circumstances do not exist. An attacker can expect repeatable success against the vulnerable component.
Privileges Required: Low: The attacker is authorized with (i.e., requires) privileges that provide basic user capabilities that could normally affect only settings and files owned by a user. Alternatively, an attacker with Low privileges may have the ability to cause an impact only to non-sensitive resources.
User Interaction: None: The vulnerable system can be exploited without any interaction from any user.
Scope: Unchanged: An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
Confidentiality: None: There is no loss of confidentiality within the impacted component.
Integrity: High: There is a total loss of integrity, or a complete loss of protection. For example, the attacker is able to modify any/all files protected by the impacted component. Alternatively, only some files can be modified, but malicious modification would present a direct, serious consequence to the impacted component.
Availability: None: There is no impact to availability within the impacted component.

Definitions: FIRST CVSS v3.1 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 13 Oct 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponized: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 29 Oct 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponized: A Metasploit exploit module or Exploit-DB entry exists (Metasploit scanner modules do not count), or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

Upgrade Grafana to 13.2.4, 13.1.8, 13.0.11 or 12.4.13.

Affected software

Product	Affected	Fixed in
GrafanaGrafana Enterprise	Affected >=13.2.0 <13.2.4	Fixed in 13.2.4
GrafanaGrafana Enterprise	Affected >=13.1.0 <13.1.8	Fixed in 13.1.8
GrafanaGrafana Enterprise	Affected >=13.0.0 <13.0.11	Fixed in 13.0.11
GrafanaGrafana Enterprise	Affected >=12.4.0 <12.4.13	Fixed in 12.4.13
GrafanaGrafana OSS	Affected >=13.2.0 <13.2.4	Fixed in 13.2.4
GrafanaGrafana OSS	Affected >=13.1.0 <13.1.8	Fixed in 13.1.8

AI-suggested

A security update is available from Red Hat that fixes this vulnerability in the grafana13.2-13.2.4-0.1.hum1 RPM packages. Users should apply this update to remediate the issue. No additional mitigations are specified by the vendor advisory.

Description

A vulnerability in Grafana allows an authenticated user or service account with read-only access to modify Git Sync connection configurations via the status subresource. This improper authorization flaw enables unauthorized configuration changes despite lacking administrative or write permissions. The issue affects Red Hat Hardened Images RPMs including grafana13.2. A security update is available that addresses this vulnerability.

CWE-425Direct Request (opens in a new tab)
Base weaknessOWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The web application does not adequately enforce appropriate authorization on all restricted URLs, scripts, or files.
Architecture and Design · Operation
Apply appropriate access control authorizations for each access to all restricted URLs, scripts or files.
Architecture and Design
Consider using MVC based frameworks such as Struts.
OWASP Cheat Sheets
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V8.3.8 (opens in a new tab)
V1.2.3 (opens in a new tab)
V1.2.2 (opens in a new tab)
Attack patterns
Directory Indexing (opens in a new tab)
Detect Unpublicized Web Pages (opens in a new tab)
Detect Unpublicized Web Services (opens in a new tab)
Key Negotiation of Bluetooth Attack (KNOB) (opens in a new tab)
Forceful Browsing (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-770Allocation of Resources Without Limits or Throttling (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #25
The product allocates a reusable resource or group of resources on behalf of an actor without imposing any intended restrictions on the size or number of resources that can be allocated.
Requirements
Clearly specify the minimum and maximum expectations for capabilities, and dictate which behaviors are acceptable when resource allocation reaches limits.
Architecture and Design
Limit the amount of resources that are accessible to unprivileged users. Set per-user limits for resources. Allow the system administrator to define these limits. Be careful to avoid CWE-410.
Architecture and Design
Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended.
OWASP Cheat Sheets
Abuse Case (opens in a new tab)
OWASP ASVS 4.0.3
V8.1.4 (opens in a new tab)
V13.4.1 (opens in a new tab)
V11.1.4 (opens in a new tab)
Attack patterns
XML Ping of the Death (opens in a new tab)
Exponential Data Expansion (opens in a new tab)
Serialized Data Parameter Blowup (opens in a new tab)
Serialized Data with Nested Payloads (opens in a new tab)
Oversized Serialized Data Payloads (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-639Authorization Bypass Through User-Controlled Key (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #24OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The system's authorization functionality does not prevent one user from gaining access to another user's data or record by modifying the key value identifying the data.
Architecture and Design
For each and every data access, ensure that the user has sufficient privilege to access the record that is being requested.
Architecture and Design · Implementation
Make sure that the key that is used in the lookup of a specific user's record is not controllable externally by the user or that any tampering can be detected.
Architecture and Design
Use encryption in order to make it more difficult to guess other legitimate values of the key or associate a digital signature with the key so that the server can verify that there has been no tampering.
OWASP Cheat Sheets
Access Control (opens in a new tab)
Authorization Testing Automation (opens in a new tab)
Cross-Site Request Forgery Prevention (opens in a new tab)
Insecure Direct Object Reference Prevention (opens in a new tab)
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V4.1.2 (opens in a new tab)
V4.2.1 (opens in a new tab)
V8.3.8 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-918Server-Side Request Forgery (opens in a new tab)
Base weaknessCWE Top 25 (2025): #22OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The web server receives a URL or similar request from an upstream component and retrieves the contents of this URL, but it does not sufficiently ensure that the request is being sent to the expected destination.
Implementation · Operation
If there is a known list of applications, IP, hostname, and/or domains to which the product is allowed to communicate, then use allowlists to ensure that outgoing requests are restricted to these known entities. The allowlists could be in the application code or possibly enforced by firewalls or network segmentation.
Implementation · Operation
If the product is expected to be able to connect to arbitrary IP addresses or domains, consider using a denylist that includes private network addresses, internal domain names, etc. The denylist could be in the application code or possibly enforced by firewalls or network segmentation.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
OWASP Cheat Sheets
Server Side Request Forgery Prevention (opens in a new tab)
Unvalidated Redirects and Forwards (opens in a new tab)
Cross Site Scripting Prevention (opens in a new tab)
DOM based XSS Prevention (opens in a new tab)
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V12.6.1 (opens in a new tab)
V5.2.6 (opens in a new tab)
Attack patterns
Server Side Request Forgery (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-551Incorrect Behavior Order: Authorization Before Parsing and Canonicalization (opens in a new tab)
Base weakness
If a web server does not fully parse requested URLs before it examines them for authorization, it may be possible for an attacker to bypass authorization protection.
Architecture and Design
URL Inputs should be decoded and canonicalized to the application's current internal representation before being validated and processed for authorization. Make sure that your application does not decode the same input twice.
OWASP ASVS 4.0.3
V8.3.8 (opens in a new tab)
V13.4.2 (opens in a new tab)
V7.2.2 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Affected software

Description

AI analysisMachine-generated, updated 29 Oct 2026, 10:22 UTC

WeaknessesCWE-425, CWE-770, CWE-639 +2

Technical details

References

Community reviews

Related threats