CVE-2026-3832VulnerabilityPublished 2 May 2026Updated 26 Oct 2026

Red Hat Security Advisory: Red Hat Hardened Images RPMs bug fix and enhancement update

Affects Red HatSource GCVE Database

Authoritative record:CVE-2026-3832· Low 3.7

Not known to be exploited · CVSS 3.7 Low : upgrade Red Hat to 3.8.13 when convenient.

Data as of 26 Oct 2026, 17:58 UTC

CVSS 3.1 base score

3.7Low

How severe the flaw is on the 0–10 CVSS scale.

Patch: Available – fixed in 3.8.13

CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N

Attack Vector: Network
Attack Complexity: High
Privileges Required: None
User Interaction: None
Scope: Unchanged
Confidentiality: Low
Integrity: None
Availability: None

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable component is bound to the network stack and the set of possible attackers extends beyond the other options listed, up to and including the entire Internet. Such a vulnerability is often termed 'remotely exploitable' and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: High: A successful attack depends on conditions beyond the attacker's control. That is, a successful attack cannot be accomplished at will, but requires the attacker to invest in some measurable amount of effort in preparation or execution against the vulnerable component before a successful attack can be expected. For example, a successful attack may require an attacker to: gather knowledge about the environment in which the vulnerable target/component exists; prepare the target environment to improve exploit reliability; or inject themselves into the logical network path between the target and the resource requested by the victim in order to read and/or modify network communications (e.g., a man in the middle attack).
Privileges Required: None: The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files to carry out an attack.
User Interaction: None: The vulnerable system can be exploited without any interaction from any user.
Scope: Unchanged: An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
Confidentiality: Low: There is some loss of confidentiality. Access to some restricted information is obtained, but the attacker does not have control over what information is obtained, or the amount or kind of loss is limited. The information disclosure does not cause a direct, serious loss to the impacted component.
Integrity: None: There is no loss of integrity within the impacted component.
Availability: None: There is no impact to availability within the impacted component.

Definitions: FIRST CVSS v3.1 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 30 Apr 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponised: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 26 Oct 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponised: Public exploit code exists in Metasploit or Exploit-DB, or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

Upgrade gnutls to 3.8.13.

Affected software

Product	Affected	Fixed in
gnutls	Affected <3.8.13	Fixed in 3.8.13

Description

This update includes the following RPMs: gnutls: * gnutls-3.8.13-1.hum1 (aarch64, x86_64) * gnutls-c++-3.8.13-1.hum1 (aarch64, x86_64) * gnutls-dane-3.8.13-1.hum1 (aarch64, x86_64) * gnutls-devel-3.8.13-1.hum1 (aarch64, x86_64) * gnutls-fips-3.8.13-1.hum1 (aarch64, x86_64) * gnutls-utils-3.8.13-1.hum1 (aarch64, x86_64) * mingw32-gnutls-3.8.13-1.hum1 (noarch) * mingw64-gnutls-3.8.13-1.hum1 (noarch) * gnutls-3.8.13-1.hum1.src (src)

CWE-179Incorrect Behavior Order: Early Validation (opens in a new tab)
Base weakness
The product validates input before applying protection mechanisms that modify the input, which could allow an attacker to bypass the validation via dangerous inputs that only arise after the modification.
Implementation · Input Validation
Inputs should be decoded and canonicalized to the application's current internal representation before being validated (CWE-180). Make sure that the application does not decode the same input twice (CWE-174).
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
Attack patterns
Using Leading 'Ghost' Character Sequences to Bypass Input Filters (opens in a new tab)
Exploiting Multiple Input Interpretation Layers (opens in a new tab)
Using Unicode Encoding to Bypass Validation Logic (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-178Improper Handling of Case Sensitivity (opens in a new tab)
Base weakness
The product does not properly account for differences in case sensitivity when accessing or determining the properties of a resource, leading to inconsistent results.
Architecture and Design · Input Validation
Avoid making decisions based on names of resources (e.g. files) if those resources can have alternate names.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Implementation · Input Validation
Inputs should be decoded and canonicalized to the application's current internal representation before being validated (CWE-180). Make sure that the application does not decode the same input twice (CWE-174).
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-126Buffer Over-read (opens in a new tab)
Variant weakness
The product reads from a buffer using buffer access mechanisms such as indexes or pointers that reference memory locations after the targeted buffer.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-208Observable Timing Discrepancy (opens in a new tab)
Base weakness
Two separate operations in a product require different amounts of time to complete, in a way that is observable to an actor and reveals security-relevant information about the state of the product, such as whether a particular operation was successful or not.
OWASP Cheat Sheets
Error Handling (opens in a new tab)
Logging (opens in a new tab)
OWASP ASVS 4.0.3
V8.3.4 (opens in a new tab)
V14.3.3 (opens in a new tab)
V7.3.3 (opens in a new tab)
Attack patterns
Cross-Domain Search Timing (opens in a new tab)
Application Fingerprinting (opens in a new tab)
System Footprinting (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-191Integer Underflow (Wrap or Wraparound) (opens in a new tab)
Base weakness
The product subtracts one value from another, such that the result is less than the minimum allowable integer value, which produces a value that is not equal to the correct result.
CWE-130Improper Handling of Length Parameter Inconsistency (opens in a new tab)
Base weakness
The product parses a formatted message or structure, but it does not handle or incorrectly handles a length field that is inconsistent with the actual length of the associated data.
Implementation
When processing structured incoming data containing a size field followed by raw data, ensure that you identify and resolve any inconsistencies between the size field and the actual size of the data.
Implementation
Do not let the user control the size of the buffer.
Implementation
Validate that the length of the user-supplied data is consistent with the buffer size.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
Attack patterns
Buffer Overflow via Parameter Expansion (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-475Undefined Behavior for Input to API (opens in a new tab)
Base weakness
The behavior of this function is undefined unless its control parameter is set to a specific value.
CWE-170Improper Null Termination (opens in a new tab)
Base weaknessLikelihood of exploit: Medium
The product does not terminate or incorrectly terminates a string or array with a null character or equivalent terminator.
Requirements
Use a language that is not susceptible to these issues. However, be careful of null byte interaction errors (CWE-626) with lower-level constructs that may be written in a language that is susceptible.
Implementation
Ensure that all string functions used are understood fully as to how they append null characters. Also, be wary of off-by-one errors when appending nulls to the end of strings.
Implementation
If performance constraints permit, special code can be added that validates null-termination of string buffers, this is a rather naive and error-prone solution.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-295Improper Certificate Validation (opens in a new tab)
Base weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
The product does not validate, or incorrectly validates, a certificate.
Architecture and Design · Implementation
Certificates should be carefully managed and checked to assure that data are encrypted with the intended owner's public key.
Implementation
If certificate pinning is being used, ensure that all relevant properties of the certificate are fully validated before the certificate is pinned, including the hostname.
OWASP Cheat Sheets
Transport Layer Protection (opens in a new tab)
TLS Cipher String (opens in a new tab)
OWASP Authentication (opens in a new tab)
OWASP ASVS 4.0.3
V9.2.1 (opens in a new tab)
V1.9.2 (opens in a new tab)
V2.8.5 (opens in a new tab)
Attack patterns
Creating a Rogue Certification Authority Certificate (opens in a new tab)
Signature Spoofing by Improper Validation (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-825Expired Pointer Dereference (opens in a new tab)
Base weakness
The product dereferences a pointer that contains a location for memory that was previously valid, but is no longer valid.
Architecture and Design
Choose a language that provides automatic memory management.
Implementation
When freeing pointers, be sure to set them to NULL once they are freed. However, the utilization of multiple or complex data structures may lower the usefulness of this strategy.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-193Off-by-one Error (opens in a new tab)
Base weakness
A product calculates or uses an incorrect maximum or minimum value that is 1 more, or 1 less, than the correct value.
Implementation
When copying character arrays or using character manipulation methods, the correct size parameter must be used to account for the null terminator that needs to be added at the end of the array.
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Affected software

Description

WeaknessesCWE-179, CWE-178, CWE-126 +8

Technical details

References

Community reviews

Related threats