CVE-2026-93981VulnerabilityPublished 30 Sep 2026Updated 7 Nov 2026

Red Hat Security Advisory: Red Hat Hardened Images RPMs Security Update

Affects Red Hat grafana12.4Source GCVE Database

Authoritative record:CVE-2026-93981· Low 2.3

Not known to be exploited · CVSS 2.3 Low : upgrade the Red Hat redhat/grafana12.4 package to 12.4.10-0.10.hum1 when convenient.

Data as of 13 Nov 2026, 23:54 UTC

CVSS 4.0 base score

2.3Low

How severe the flaw is on the 0–10 CVSS scale.

EPSS: 0.2% chance of exploitation in 30 days – higher than 13% of CVEsExploit Prediction Scoring System: the likelihood attackers will use this flaw soon.
Patch: Available – fixed in 12.4.10-0.10.hum1

CVSS:4.0/AV:N/AC:H/AT:P/PR:N/UI:P/VC:L/VI:L/VA:N/SC:L/SI:L/SA:N

Attack Vector: Network
Attack Complexity: High
Attack Requirements: Present
Privileges Required: None
User Interaction: Passive
Vulnerable system confidentiality: Low
Vulnerable system integrity: Low
Vulnerable system availability: None
Subsequent system confidentiality: Low
Subsequent system integrity: Low
Subsequent system availability: None

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable system is bound to the network stack and the set of possible attackers extends beyond the other options listed below, up to and including the entire Internet. Such a vulnerability is often termed “remotely exploitable” and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: High: The successful attack depends on the evasion or circumvention of security-enhancing techniques in place that would otherwise hinder the attack. These include: Evasion of exploit mitigation techniques, for example, circumvention of address space randomization (ASLR) or data execution prevention (DEP) must be performed for the attack to be successful; Obtaining target-specific secrets. The attacker must gather some target-specific secret before the attack can be successful. A secret is any piece of information that cannot be obtained through any amount of reconnaissance. To obtain the secret the attacker must perform additional attacks or break otherwise secure measures (e.g. knowledge of a secret key may be needed to break a crypto channel). This operation must be performed for each attacked target.
Attack Requirements: Present: The successful attack depends on the presence of specific deployment and execution conditions of the vulnerable system that enable the attack. These include: a race condition must be won to successfully exploit the vulnerability (the successfulness of the attack is conditioned on execution conditions that are not under full control of the attacker, or the attack may need to be launched multiple times against a single target before being successful); the attacker must inject themselves into the logical network path between the target and the resource requested by the victim (e.g. vulnerabilities requiring an on-path attacker).
Privileges Required: None: The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files of the vulnerable system to carry out an attack.
User Interaction: Passive: Successful exploitation of this vulnerability requires limited interaction by the targeted user with the vulnerable system and the attacker’s payload. These interactions would be considered involuntary and do not require that the user actively subvert protections built into the vulnerable system.
Vulnerable system confidentiality: Low: There is some loss of confidentiality. Access to some restricted information is obtained, but the attacker does not have control over what information is obtained, or the amount or kind of loss is limited. The information disclosure does not cause a direct, serious loss to the Vulnerable System.
Vulnerable system integrity: Low: Modification of data is possible, but the attacker does not have control over the consequence of a modification, or the amount of modification is limited. The data modification does not have a direct, serious impact to the Vulnerable System.
Vulnerable system availability: None: There is no impact to availability within the Vulnerable System.
Subsequent system confidentiality: Low: There is some loss of confidentiality. Access to some restricted information is obtained, but the attacker does not have control over what information is obtained, or the amount or kind of loss is limited. The information disclosure does not cause a direct, serious loss to the Subsequent System.
Subsequent system integrity: Low: Modification of data is possible, but the attacker does not have control over the consequence of a modification, or the amount of modification is limited. The data modification does not have a direct, serious impact to the Subsequent System.
Subsequent system availability: None: There is no impact to availability within the Subsequent System or all availability impact is constrained to the Vulnerable System.

Definitions: FIRST CVSS v4.0 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 19 Sep 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponized: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 14 Nov 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponized: A Metasploit exploit module or Exploit-DB entry exists (Metasploit scanner modules do not count), or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

Upgrade the Red Hat redhat/grafana12.4 package to 12.4.10-0.10.hum1.

Affected software

Product	Affected	Fixed in
Red Hatredhat/grafana12.4`pkg:rpm/redhat/grafana12.4`Other threats	Affected <12.4.10-0.10.hum1	Fixed in 12.4.10-0.10.hum1

Check your own hosts for these packages with threat-finder (opens in a new tab), our free open-source scanner.

AI-suggested

Apply the Red Hat update to upgrade grafana12.4 to version 12.4.10-0.10.hum1 or later as provided in the advisory. This update addresses CVE-2026-93981 and mitigates the associated security risk. No additional mitigation actions are specified or required according to the vendor advisory.

Description

Red Hat has issued a security advisory for Red Hat Hardened Images RPMs, specifically addressing vulnerabilities in the grafana12.4 package. The update fixes CVE-2026-93981, which affects versions prior to 12.4.10-0.10.hum1. No explicit CVSS score is provided, but the severity is assessed as high. The advisory includes updated RPMs for aarch64 and x86_64 architectures.

CWE-79Improper Neutralization of Input During Web Page Generation (Cross-site Scripting) (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #1OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product does not neutralize or incorrectly neutralizes user-controllable input before it is placed in output that is used as a web page that is served to other users.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Implementation · Architecture and Design
Understand the context in which your data will be used and the encoding that will be expected. This is especially important when transmitting data between different components, or when generating outputs that can contain multiple encodings at the same time, such as web pages or multi-part mail messages.
Architecture and Design · Implementation · Attack Surface Reduction
Understand all the potential areas where untrusted inputs can enter your software: parameters or arguments, cookies, anything read from the network, environment variables, reverse DNS lookups, query results, request headers, URL components, e-mail, files, filenames, databases, and any external systems that provide…
OWASP Cheat Sheets
Cross Site Scripting Prevention (opens in a new tab)
DOM based XSS Prevention (opens in a new tab)
Injection Prevention (opens in a new tab)
Abuse Case (opens in a new tab)
Deserialization (opens in a new tab)
OWASP ASVS 4.0.3
V5.3.3 (opens in a new tab)
V1.5.1 (opens in a new tab)
Attack patterns
XSS Using MIME Type Mismatch (opens in a new tab)
DOM-Based XSS (opens in a new tab)
Reflected XSS (opens in a new tab)
Stored XSS (opens in a new tab)
Cross-Site Scripting (XSS) (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-1333Inefficient Regular Expression Complexity (opens in a new tab)
Base weaknessLikelihood of exploit: High
The product uses a regular expression with a worst-case computational complexity that is inefficient and possibly exponential.
Architecture and Design
Use regular expressions that do not support backtracking, e.g. by removing nested quantifiers.
System Configuration
Set backtracking limits in the configuration of the regular expression implementation, such as PHP's pcre.backtrack_limit. Also consider limits on execution time for the process.
Implementation
Do not use regular expressions with untrusted input. If regular expressions must be used, avoid using backtracking in the expression.
OWASP Cheat Sheets
File Upload (opens in a new tab)
OWASP ASVS 4.0.3
V12.1.1 (opens in a new tab)
Attack patterns
Regular Expression Exponential Blowup (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-918Server-Side Request Forgery (opens in a new tab)
Base weaknessCWE Top 25 (2025): #22OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The web server receives a URL or similar request from an upstream component and retrieves the contents of this URL, but it does not sufficiently ensure that the request is being sent to the expected destination.
Implementation · Operation
If there is a known list of applications, IP, hostname, and/or domains to which the product is allowed to communicate, then use allowlists to ensure that outgoing requests are restricted to these known entities. The allowlists could be in the application code or possibly enforced by firewalls or network segmentation.
Implementation · Operation
If the product is expected to be able to connect to arbitrary IP addresses or domains, consider using a denylist that includes private network addresses, internal domain names, etc. The denylist could be in the application code or possibly enforced by firewalls or network segmentation.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
OWASP Cheat Sheets
Server Side Request Forgery Prevention (opens in a new tab)
Unvalidated Redirects and Forwards (opens in a new tab)
Cross Site Scripting Prevention (opens in a new tab)
DOM based XSS Prevention (opens in a new tab)
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V12.6.1 (opens in a new tab)
V5.2.6 (opens in a new tab)
Attack patterns
Server Side Request Forgery (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-1287Improper Validation of Specified Type of Input (opens in a new tab)
Base weakness
The product receives input that is expected to be of a certain type, but it does not validate or incorrectly validates that the input is actually of the expected type.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-248Uncaught Exception (opens in a new tab)
Base weaknessOWASP Top 10 A10:2025: Mishandling of Exceptional Conditions (opens in a new tab)
An exception is thrown from a function, but it is not caught.
Requirements
The choice between a language which has named or unnamed exceptions needs to be done. While unnamed exceptions exacerbate the chance of not properly dealing with an exception, named exceptions suffer from the up call version of the weak base class problem.
Requirements
A language can be used which requires, at compile time, to catch all serious exceptions. However, one must make sure to use the most current version of the API as new exceptions could be added.
Implementation
Catch all relevant exceptions. This is the recommended solution. Ensure that all exceptions are handled in such a way that you can be sure of the state of your system at any given moment.
OWASP Cheat Sheets
Logging (opens in a new tab)
Error Handling (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-454External Initialization of Trusted Variables or Data Stores (opens in a new tab)
Base weaknessOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The product initializes critical internal variables or data stores using inputs that can be modified by untrusted actors.
Implementation · Input Validation
A product system should be reluctant to trust variables that have been initialized outside of its trust boundary, especially if they are initialized by users. Ensure adequate checking (e.g. input validation) is performed when relying on input from outside a trust boundary.
Architecture and Design
Avoid any external control of variables. If necessary, restrict the variables that can be modified using an allowlist, and use a different namespace or naming convention if possible.
OWASP Cheat Sheets
Secure Design Principles (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-915Improperly Controlled Modification of Dynamically-Determined Object Attributes (opens in a new tab)
Base weaknessOWASP Top 10 A08:2025: Software or Data Integrity Failures (opens in a new tab)
The product receives input from an upstream component that specifies multiple attributes, properties, or fields that are to be initialized or updated in an object, but it does not properly control which attributes can be modified.
Implementation
If available, use features of the language or framework that allow specification of allowlists of attributes or fields that are allowed to be modified. If possible, prefer allowlists over denylists.
Architecture and Design · Implementation
If available, use the signing/sealing features of the programming language to assure that deserialized data has not been tainted. For example, a hash-based message authentication code (HMAC) could be used to ensure that data has not been modified.
Implementation · Input Validation
For any externally-influenced input, check the input against an allowlist of internal object attributes or fields that are allowed to be modified.
OWASP Cheat Sheets
Mass Assignment (opens in a new tab)
Software Supply Chain Security (opens in a new tab)
Infrastructure as Code (opens in a new tab)
OWASP ASVS 4.0.3
V5.1.2 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-941Incorrectly Specified Destination in a Communication Channel (opens in a new tab)
Base weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
The product creates a communication channel to initiate an outgoing request to an actor, but it does not correctly specify the intended destination for that actor.
OWASP Cheat Sheets
Docker Security (opens in a new tab)
OWASP Authentication (opens in a new tab)
OWASP ASVS 4.0.3
V1.14.1 (opens in a new tab)
V1.4.4 (opens in a new tab)
V1.4.5 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-628Function Call with Incorrectly Specified Arguments (opens in a new tab)
Base weaknessOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The product calls a function, procedure, or routine with arguments that are not correctly specified.
Build and Compilation
Once found, these issues are easy to fix. Use code inspection tools and relevant compiler features to identify potential violations. Pay special attention to code that is not likely to be exercised heavily during QA.
Architecture and Design
Make sure your API's are stable before you use them in production code.
OWASP Cheat Sheets
Secure Design Principles (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Affected software

Description

AI analysisMachine-generated, updated 7 Oct 2026, 22:23 UTC

WeaknessesCWE-79, CWE-1333, CWE-918 +6

Technical details

References

Community reviews

Related threats