Red Hat Security Advisory: Red Hat multicluster engine for Kubernetes - 2.17.4
Affects Red HatSource GCVE Database
Not known to be exploited · CVSS 6.1 Medium →: upgrade Red Hat html to 0.55.0 when convenient.
Data as of 13 Nov 2026, 13:04 UTC
- Patch
- Available – fixed in 0.55.0
CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N- Attack Vector
- Network
- Attack Complexity
- Low
- Privileges Required
- None
- User Interaction
- Required
- Scope
- Changed
- Confidentiality
- Low
- Integrity
- Low
- Availability
- None
Bold values are the worst case: easiest to exploit or largest impact.
- Attack Vector: Network
- The vulnerable component is bound to the network stack and the set of possible attackers extends beyond the other options listed, up to and including the entire Internet. Such a vulnerability is often termed 'remotely exploitable' and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
- Attack Complexity: Low
- Specialized access conditions or extenuating circumstances do not exist. An attacker can expect repeatable success against the vulnerable component.
- Privileges Required: None
- The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files to carry out an attack.
- User Interaction: Required
- Successful exploitation of this vulnerability requires a user to take some action before the vulnerability can be exploited.
- Scope: Changed
- An exploited vulnerability can affect resources beyond the security scope managed by the security authority of the vulnerable component. In this case, the vulnerable component and the impacted component are different and managed by different security authorities.
- Confidentiality: Low
- There is some loss of confidentiality. Access to some restricted information is obtained, but the attacker does not have control over what information is obtained, or the amount or kind of loss is limited. The information disclosure does not cause a direct, serious loss to the impacted component.
- Integrity: Low
- Modification of data is possible, but the attacker does not have control over the consequence of a modification, or the amount of modification is limited. The data modification does not have a direct, serious impact on the impacted component.
- Availability: None
- There is no impact to availability within the impacted component.
Definitions: FIRST CVSS v3.1 specification.
Exploitation evidence
Disclosed: evidence found.
CVE published 22 May 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponized: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors
A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 13 Nov 2026.
- Disclosed
- The CVE record is public on cve.org. Its publication is t = 0.
- Detectable
- A public nuclei template can find exposed instances, for defenders and attackers alike.
- Weaponized
- A Metasploit exploit module or Exploit-DB entry exists (Metasploit scanner modules do not count), or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
- Exploited in the wild
- CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
- Observed by OffSeq Mirage
- OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.
Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.
What to do
Upgrade golang.org/x/net/html to 0.55.0.
Affected software
| Product | Affected | Fixed in |
|---|---|---|
| golang.org/x/netgolang.org/x/net/html | Affected
| Fixed in
|
Gogolang.org/x/net/htmlpkg:golang/golang.org/x/net/htmlOther threats | Affected
| Fixed in– |
Gogolang.org/x/net/htmlpkg:golang/golang.org/x/net/htmlOther threats | Affected
| Fixed in
|
Check your own hosts for these packages with threat-finder (opens in a new tab), our free open-source scanner.
Description
The multicluster engine for Kubernetes provides the foundational components that are necessary for the centralized management of multiple Kubernetes-based clusters across data centers, public clouds, and private clouds. You can use the engine to create new Red Hat OpenShift Container Platform clusters or to bring existing Kubernetes-based clusters under management by importing them. After the clusters are managed, you can use the APIs that are provided by the engine to distribute configuration based on placement policy.
- CWE-79Improper Neutralization of Input During Web Page Generation (Cross-site Scripting) (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #1OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product does not neutralize or incorrectly neutralizes user-controllable input before it is placed in output that is used as a web page that is served to other users.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Implementation · Architecture and Design
Understand the context in which your data will be used and the encoding that will be expected. This is especially important when transmitting data between different components, or when generating outputs that can contain multiple encodings at the same time, such as web pages or multi-part mail messages.
Architecture and Design · Implementation · Attack Surface Reduction
Understand all the potential areas where untrusted inputs can enter your software: parameters or arguments, cookies, anything read from the network, environment variables, reverse DNS lookups, query results, request headers, URL components, e-mail, files, filenames, databases, and any external systems that provide…
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-776Improper Restriction of Recursive Entity References in DTDs (Billion Laughs Attack) (opens in a new tab)
Base weaknessLikelihood of exploit: MediumOWASP Top 10 A02:2025: Security Misconfiguration (opens in a new tab)
The product uses XML documents and allows their structure to be defined with a Document Type Definition (DTD), but it does not properly control the number of recursive definitions of entities.
Operation
If possible, prohibit the use of DTDs or use an XML parser that limits the expansion of recursive DTD entities.
Implementation
Before parsing XML files with associated DTDs, scan for recursive entity declarations and do not continue parsing potentially explosive content.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
- Attack patterns
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-1289Improper Validation of Unsafe Equivalence in Input (opens in a new tab)
Base weakness
The product receives an input value that is used as a resource identifier or other type of reference, but it does not validate or incorrectly validates that the input is equivalent to a potentially-unsafe value.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-59Improper Link Resolution Before File Access (Link Following) (opens in a new tab)
Base weaknessLikelihood of exploit: MediumOWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product attempts to access a file based on the filename, but it does not properly prevent that filename from identifying a link or shortcut that resolves to an unintended resource.
Architecture and Design · Separation of Privilege
Follow the principle of least privilege when assigning access rights to entities in a software system.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-190Integer Overflow or Wraparound (opens in a new tab)
Base weaknessLikelihood of exploit: Medium
The product performs a calculation that can produce an integer overflow or wraparound when the logic assumes that the resulting value will always be larger than the original value. This occurs when an integer value is incremented to a value that is too large to store in the associated representation. When this occurs, the value may become a very small or negative number.
Requirements
Ensure that all protocols are strictly defined, such that all out-of-bounds behavior can be identified simply, and require strict conformance to the protocol.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
- OWASP Cheat Sheets
- Attack patterns
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-770Allocation of Resources Without Limits or Throttling (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #25
The product allocates a reusable resource or group of resources on behalf of an actor without imposing any intended restrictions on the size or number of resources that can be allocated.
Requirements
Clearly specify the minimum and maximum expectations for capabilities, and dictate which behaviors are acceptable when resource allocation reaches limits.
Architecture and Design
Limit the amount of resources that are accessible to unprivileged users. Set per-user limits for resources. Allow the system administrator to define these limits. Be careful to avoid CWE-410.
Architecture and Design
Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-1050Excessive Platform Resource Consumption within a Loop (opens in a new tab)
Base weakness
The product has a loop body or loop condition that contains a control element that directly or indirectly consumes platform resources, e.g. messaging, sessions, locks, or file descriptors.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-494Download of Code Without Integrity Check (opens in a new tab)
Base weaknessLikelihood of exploit: MediumOWASP Top 10 A08:2025: Software or Data Integrity Failures (opens in a new tab)
The product downloads source code or an executable from a remote location and executes the code without sufficiently verifying the origin and integrity of the code.
Implementation
Perform proper forward and reverse DNS lookups to detect DNS spoofing.
Architecture and Design · Operation
Encrypt the code with a reliable encryption scheme before transmitting.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-347Improper Verification of Cryptographic Signature (opens in a new tab)
Base weaknessOWASP Top 10 A04:2025: Cryptographic Failures (opens in a new tab)
The product does not verify, or incorrectly verifies, the cryptographic signature for data.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-823Use of Out-of-range Pointer Offset (opens in a new tab)
Base weakness
The product performs pointer arithmetic on a valid pointer, but it uses an offset that can point outside of the intended range of valid memory locations for the resulting pointer.
- OWASP Cheat Sheets
- Attack patterns
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-140Improper Neutralization of Delimiters (opens in a new tab)
Base weakness
The product does not neutralize or incorrectly neutralizes delimiters.
Implementation · Input Validation
Developers should anticipate that delimiters will be injected/removed/manipulated in the input vectors of their product. Use an appropriate combination of denylists and allowlists to ensure only valid, expected and appropriate input is processed by the system.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Implementation · Output Encoding
While it is risky to use dynamically-generated query strings, code, or commands that mix control and data together, sometimes it may be unavoidable. Properly quote arguments and escape any special characters within those arguments.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
- Attack patterns
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-835Loop with Unreachable Exit Condition (Infinite Loop) (opens in a new tab)
Base weakness
The product contains an iteration or loop with an exit condition that cannot be reached, i.e., an infinite loop.
- CWE-125Out-of-bounds Read (opens in a new tab)
Base weaknessCWE Top 25 (2025): #8
The product reads data past the end, or before the beginning, of the intended buffer.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Architecture and Design · Language Selection
Use a language that provides appropriate memory abstractions.
- OWASP Cheat Sheets
- Attack patterns
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-1287Improper Validation of Specified Type of Input (opens in a new tab)
Base weakness
The product receives input that is expected to be of a certain type, but it does not validate or incorrectly validates that the input is actually of the expected type.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-524Use of Cache Containing Sensitive Information (opens in a new tab)
Base weakness
The code uses a cache that contains sensitive information, but the cache can be read by an actor outside of the intended control sphere.
Architecture and Design
Protect information stored in cache.
Architecture and Design
Do not store unnecessarily sensitive information in the cache.
Architecture and Design
Consider using encryption in the cache.
- OWASP ASVS 4.0.3
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-184Incomplete List of Disallowed Inputs (opens in a new tab)
Base weaknessOWASP Top 10 A03:2021: Injection (opens in a new tab)
The product implements a protection mechanism that relies on a list of inputs (or properties of inputs) that are not allowed by policy or otherwise require other action to neutralize before additional processing takes place, but the list is incomplete.
Implementation · Input Validation
Do not rely exclusively on detecting disallowed inputs. There are too many variants to encode a character, especially when different environments are used, so there is a high likelihood of missing some variants. Only use detection of disallowed inputs as a mechanism for detecting suspicious activity.
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-94Improper Control of Generation of Code (Code Injection) (opens in a new tab)
Base weaknessLikelihood of exploit: MediumCWE Top 25 (2025): #10OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product constructs all or part of a code segment using externally-influenced input from an upstream component, but it does not neutralize or incorrectly neutralizes special elements that could modify the syntax or behavior of the intended code segment.
Architecture and Design · Refactoring
Refactor your program so that you do not have to dynamically generate code.
Architecture and Design
Run your code in a "jail" or similar sandbox environment that enforces strict boundaries between the process and the operating system. This may effectively restrict which code can be executed by your product.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- GCVE source
- db.gcve.eu
- Csaf Category
- csaf_security_advisory
- Csaf Version
- 2.0
- Publisher
- Red Hat Product Security
- Advisory ID
- RHSA-2026:96629
- Vendor Severity
- high
- CVE Count
- 25
- Additional Cves
- CVE-2026-27136, CVE-2026-33818, CVE-2026-39821, CVE-2026-39822, CVE-2026-39834, CVE-2026-41178, CVE-2026-42502, CVE-2026-56853, CVE-2026-56858, CVE-2026-56859, CVE-2026-56860, CVE-2026-56862, CVE-2026-56864, CVE-2026-56865, CVE-2026-63209, CVE-2026-84292, CVE-2026-84304, CVE-2026-84375, CVE-2026-84394, CVE-2026-84445, CVE-2026-88031, CVE-2026-93748, CVE-2026-106445, CVE-2026-106446
References
- access.redhat.com/errata/RHSA-2026:96629 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-106445 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-106446 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-25681 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-27136 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-33818 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-39821 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-39822 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-39834 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-41178 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-42502 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-56853 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-56858 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-56859 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-56860 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-56862 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-56864 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-56865 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-63209 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-84292 (opens in a new tab)
Community reviews
Related threats
- Red Hat Security Advisory: Red Hat Advanced Cluster Management for Kubernetes - 2.17.4HighVulnerability
- Red Hat Security Advisory: Red Hat Quay - 3.15.9CriticalVulnerability
- Red Hat Security Advisory: Red Hat Quay - 3.14.10CriticalVulnerability
- Red Hat Security Advisory: Red Hat Quay - 3.16.7CriticalVulnerability
- Red Hat Security Advisory: Red Hat Quay - 3.17.7CriticalVulnerability