Red Hat Security Advisory: Red Hat Quay 3.16.6
Affects Red HatSource GCVE Database
Public exploit available · CVSS 7.7 High.
Data as of 26 Oct 2026, 17:59 UTC
- EPSS
- 0.3% chance of exploitation in 30 days – higher than 29% of CVEsExploit Prediction Scoring System: the likelihood attackers will use this flaw soon.
CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N/E:P/S:N/AU:Y/R:U/V:D/RE:M/U:AmberBase metrics
- Attack Vector
- Network
- Attack Complexity
- Low
- Attack Requirements
- None
- Privileges Required
- None
- User Interaction
- None
- Vulnerable system confidentiality
- None
- Vulnerable system integrity
- None
- Vulnerable system availability
- High
- Subsequent system confidentiality
- None
- Subsequent system integrity
- None
- Subsequent system availability
- None
Threat metrics
- Exploit Maturity
- POC
Supplemental metrics
- Safety
- Negligible
- Automatable
- Yes
- Recovery
- User
- Value Density
- Diffuse
- Vulnerability Response Effort
- Moderate
- Provider Urgency
- Amber
Bold values are the worst case: easiest to exploit or largest impact.
- Attack Vector: Network
- The vulnerable system is bound to the network stack and the set of possible attackers extends beyond the other options listed below, up to and including the entire Internet. Such a vulnerability is often termed “remotely exploitable” and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
- Attack Complexity: Low
- The attacker must take no measurable action to exploit the vulnerability. The attack requires no target-specific circumvention to exploit the vulnerability. An attacker can expect repeatable success against the vulnerable system.
- Attack Requirements: None
- The successful attack does not depend on the deployment and execution conditions of the vulnerable system. The attacker can expect to be able to reach the vulnerability and execute the exploit under all or most instances of the vulnerability.
- Privileges Required: None
- The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files of the vulnerable system to carry out an attack.
- User Interaction: None
- The vulnerable system can be exploited without interaction from any human user, other than the attacker.
- Vulnerable system confidentiality: None
- There is no loss of confidentiality within the Vulnerable System.
- Vulnerable system integrity: None
- There is no loss of integrity within the Vulnerable System.
- Vulnerable system availability: High
- There is a total loss of availability, resulting in the attacker being able to fully deny access to resources in the Vulnerable System; this loss is either sustained (while the attacker continues to deliver the attack) or persistent (the condition persists even after the attack has completed). Alternatively, the attacker has the ability to deny some availability, but the loss of availability presents a direct, serious consequence to the Vulnerable System (e.g., the attacker cannot disrupt existing connections, but can prevent new connections; the attacker can repeatedly exploit a vulnerability that, in each instance of a successful attack, leaks a only small amount of memory, but after repeated exploitation causes a service to become completely unavailable).
- Subsequent system confidentiality: None
- There is no loss of confidentiality within the Subsequent System or all confidentiality impact is constrained to the Vulnerable System.
- Subsequent system integrity: None
- There is no loss of integrity within the Subsequent System or all integrity impact is constrained to the Vulnerable System.
- Subsequent system availability: None
- There is no impact to availability within the Subsequent System or all availability impact is constrained to the Vulnerable System.
- Exploit Maturity: POC
- Based on threat intelligence sources each of the following must apply: · Proof-of-concept is publicly available · No knowledge of reported attempts to exploit this vulnerability · No knowledge of publicly available solutions used to simplify attempts to exploit the vulnerability
- Safety: Negligible
- Consequences of the vulnerability meet definition of IEC 61508 consequence category "negligible."
- Automatable: Yes
- Attackers can reliably automate all 4 steps of the kill chain. These steps are reconnaissance, weaponization, delivery, and exploitation (e.g., the vulnerability is “wormable”).
- Recovery: User
- The system requires manual intervention by the user to recover services, after an attack has been performed.
- Value Density: Diffuse
- The vulnerable system has limited resources. That is, the resources that the attacker will gain control over with a single exploitation event are relatively small. An example of Diffuse (think: limited) Value Density would be an attack on a single email client vulnerability.
- Vulnerability Response Effort: Moderate
- The actions required to respond to a vulnerability require some effort on behalf of the consumer and could cause minimal service impact to implement. Examples include: simple remote update, disabling of a subsystem, or a low-touch software upgrade such as a driver update.
- Provider Urgency: Amber
- Provider has assessed the impact of this vulnerability as having a moderate urgency.
Definitions: FIRST CVSS v4.0 specification.
Exploitation evidence
Disclosed: evidence found.
CVE published 30 Jun 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponised: evidence found.
CVSS exploit maturity: proof of concept public
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors
A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), CVSS vector, the Metasploit, Exploit-DB and nuclei-templates index as of 26 Oct 2026.
- Disclosed
- The CVE record is public on cve.org. Its publication is t = 0.
- Detectable
- A public nuclei template can find exposed instances, for defenders and attackers alike.
- Weaponised
- Public exploit code exists in Metasploit or Exploit-DB, or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
- Exploited in the wild
- CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
- Observed by OffSeq Mirage
- OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.
Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.
What to do
Affected software
| Product | Affected | Fixed in |
|---|---|---|
| juliangruberbrace-expansion | Affected
| Fixed in– |
npmbrace-expansionpkg:npm/brace-expansionOther threats | Affected
| Fixed in– |
npmbrace-expansionpkg:npm/brace-expansionOther threats | Affected
| Fixed in– |
Check your own hosts for these packages with threat-finder (opens in a new tab), our free open-source scanner.
Description
Quay 3.16.6
- CWE-1333Inefficient Regular Expression Complexity (opens in a new tab)
Base weaknessLikelihood of exploit: High
The product uses a regular expression with a worst-case computational complexity that is inefficient and possibly exponential.
Architecture and Design
Use regular expressions that do not support backtracking, e.g. by removing nested quantifiers.
System Configuration
Set backtracking limits in the configuration of the regular expression implementation, such as PHP's pcre.backtrack_limit. Also consider limits on execution time for the process.
Implementation
Do not use regular expressions with untrusted input. If regular expressions must be used, avoid using backtracking in the expression.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
- Attack patterns
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-617Reachable Assertion (opens in a new tab)
Base weakness
The product contains an assert() or similar statement that can be triggered by an attacker, which leads to an application exit or other behavior that is more severe than necessary.
Implementation
Make sensitive open/close operation non reachable by directly user-controlled data (e.g. open/close resources)
Implementation · Input Validation
Perform input validation on user data.
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-918Server-Side Request Forgery (SSRF) (opens in a new tab)
Base weaknessCWE Top 25 (2025): #22OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The web server receives a URL or similar request from an upstream component and retrieves the contents of this URL, but it does not sufficiently ensure that the request is being sent to the expected destination.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
- Attack patterns
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-807Reliance on Untrusted Inputs in a Security Decision (opens in a new tab)
Base weaknessLikelihood of exploit: HighOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The product uses a protection mechanism that relies on the existence or values of an input, but the input can be modified by an untrusted actor in a way that bypasses the protection mechanism.
Architecture and Design · Attack Surface Reduction
Store state information and sensitive data on the server side only.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design
For any security checks that are performed on the client side, ensure that these checks are duplicated on the server side, in order to avoid CWE-602. Attackers can bypass the client-side checks by modifying values after the checks have been performed, or by changing the client to remove the client-side checks…
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-863Incorrect Authorization (opens in a new tab)
Class weaknessLikelihood of exploit: HighCWE Top 25 (2025): #17OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product performs an authorization check when an actor attempts to access a resource or perform an action, but it does not correctly perform the check.
Architecture and Design
Divide the product into anonymous, normal, privileged, and administrative areas. Reduce the attack surface by carefully mapping roles with data and functionality. Use role-based access control (RBAC) to enforce the roles at the appropriate boundaries.
Architecture and Design
Ensure that access control checks are performed related to the business logic. These checks may be different than the access control checks that are applied to more generic resources such as files, connections, processes, memory, and database records.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-764Multiple Locks of a Critical Resource (opens in a new tab)
Base weakness
The product locks a critical resource more times than intended, leading to an unexpected state in the system.
Implementation
When locking and unlocking a resource, try to be sure that all control paths through the code in which the resource is locked one or more times correspond to exactly as many unlocks.
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-776Improper Restriction of Recursive Entity References in DTDs ('XML Entity Expansion') (opens in a new tab)
Base weaknessLikelihood of exploit: MediumOWASP Top 10 A02:2025: Security Misconfiguration (opens in a new tab)
The product uses XML documents and allows their structure to be defined with a Document Type Definition (DTD), but it does not properly control the number of recursive definitions of entities.
Operation
If possible, prohibit the use of DTDs or use an XML parser that limits the expansion of recursive DTD entities.
Implementation
Before parsing XML files with associated DTDs, scan for recursive entity declarations and do not continue parsing potentially explosive content.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
- Attack patterns
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-59Improper Link Resolution Before File Access ('Link Following') (opens in a new tab)
Base weaknessLikelihood of exploit: MediumOWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product attempts to access a file based on the filename, but it does not properly prevent that filename from identifying a link or shortcut that resolves to an unintended resource.
Architecture and Design · Separation of Privilege
Follow the principle of least privilege when assigning access rights to entities in a software system.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-22Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #6OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product uses external input to construct a pathname that is intended to identify a file or directory that is located underneath a restricted parent directory, but the product does not properly neutralize special elements within the pathname that can cause the pathname to resolve to a location that is outside of the restricted directory.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Architecture and Design
For any security checks that are performed on the client side, ensure that these checks are duplicated on the server side, in order to avoid CWE-602. Attackers can bypass the client-side checks by modifying values after the checks have been performed, or by changing the client to remove the client-side checks…
Implementation · Input Validation
Inputs should be decoded and canonicalized to the application's current internal representation before being validated (CWE-180). Make sure that the application does not decode the same input twice (CWE-174).
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
- Attack patterns
- Path Traversal (opens in a new tab)
- Using Slashes and URL Encoding Combined to Bypass Validation Logic (opens in a new tab)
- Manipulating Web Input to File System Calls (opens in a new tab)
- Using Escaped Slashes in Alternate Encoding (opens in a new tab)
- Using Slashes in Alternate Encoding (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-125Out-of-bounds Read (opens in a new tab)
Base weaknessCWE Top 25 (2025): #8
The product reads data past the end, or before the beginning, of the intended buffer.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Architecture and Design · Language Selection
Use a language that provides appropriate memory abstractions.
- OWASP Cheat Sheets
- Attack patterns
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-1050Excessive Platform Resource Consumption within a Loop (opens in a new tab)
Base weakness
The product has a loop body or loop condition that contains a control element that directly or indirectly consumes platform resources, e.g. messaging, sessions, locks, or file descriptors.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-601URL Redirection to Untrusted Site ('Open Redirect') (opens in a new tab)
Base weaknessLikelihood of exploit: LowOWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The web application accepts a user-controlled input that specifies a link to an external site, and uses that link in a redirect.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Architecture and Design
Use an intermediate disclaimer page that provides the user with a clear warning that they are leaving the current site. Implement a long timeout before the redirect occurs, or force the user to click on the link. Be careful to avoid XSS problems (CWE-79) when generating the disclaimer page.
Architecture and Design · Enforcement by Conversion
When the set of acceptable objects, such as filenames or URLs, is limited or known, create a mapping from a set of fixed input values (such as numeric IDs) to the actual filenames or URLs, and reject all other inputs.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
- Attack patterns
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-770Allocation of Resources Without Limits or Throttling (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #25
The product allocates a reusable resource or group of resources on behalf of an actor without imposing any intended restrictions on the size or number of resources that can be allocated.
Requirements
Clearly specify the minimum and maximum expectations for capabilities, and dictate which behaviors are acceptable when resource allocation reaches limits.
Architecture and Design
Limit the amount of resources that are accessible to unprivileged users. Set per-user limits for resources. Allow the system administrator to define these limits. Be careful to avoid CWE-410.
Architecture and Design
Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-1285Improper Validation of Specified Index, Position, or Offset in Input (opens in a new tab)
Base weakness
The product receives input that is expected to specify an index, position, or offset into an indexable resource such as a buffer or file, but it does not validate or incorrectly validates that the specified index/position/offset has the required properties.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-835Loop with Unreachable Exit Condition ('Infinite Loop') (opens in a new tab)
Base weakness
The product contains an iteration or loop with an exit condition that cannot be reached, i.e., an infinite loop.
- CWE-79Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #1OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product does not neutralize or incorrectly neutralizes user-controllable input before it is placed in output that is used as a web page that is served to other users.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Implementation · Architecture and Design
Understand the context in which your data will be used and the encoding that will be expected. This is especially important when transmitting data between different components, or when generating outputs that can contain multiple encodings at the same time, such as web pages or multi-part mail messages.
Architecture and Design · Implementation · Attack Surface Reduction
Understand all the potential areas where untrusted inputs can enter your software: parameters or arguments, cookies, anything read from the network, environment variables, reverse DNS lookups, query results, request headers, URL components, e-mail, files, filenames, databases, and any external systems that provide…
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-914Improper Control of Dynamically-Identified Variables (opens in a new tab)
Base weakness
The product does not properly restrict reading from or writing to dynamically-identified variables.
Implementation · Input Validation
For any externally-influenced input, check the input against an allowlist of internal program variables that are allowed to be modified.
Implementation · Architecture and Design · Refactoring
Refactor the code so that internal program variables do not need to be dynamically identified.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-787Out-of-bounds Write (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #5
The product writes data past the end, or before the beginning, of the intended buffer.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Operation · Build and Compilation · Environment Hardening
Use automatic buffer overflow detection mechanisms that are offered by certain compilers or compiler extensions. Examples include: the Microsoft Visual Studio /GS flag, Fedora/Red Hat FORTIFY_SOURCE GCC flag, StackGuard, and ProPolice, which provide various mechanisms including canary-based detection and range/index…
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-190Integer Overflow or Wraparound (opens in a new tab)
Base weaknessLikelihood of exploit: Medium
The product performs a calculation that can produce an integer overflow or wraparound when the logic assumes that the resulting value will always be larger than the original value. This occurs when an integer value is incremented to a value that is too large to store in the associated representation. When this occurs, the value may become a very small or negative number.
Requirements
Ensure that all protocols are strictly defined, such that all out-of-bounds behavior can be identified simply, and require strict conformance to the protocol.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
- OWASP Cheat Sheets
- Attack patterns
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-409Improper Handling of Highly Compressed Data (Data Amplification) (opens in a new tab)
Base weakness
The product does not handle or incorrectly handles a compressed input with a very high compression ratio that produces a large output.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-131Name not in the CWE catalogue (opens in a new tab)
- CWE-843Name not in the CWE catalogue (opens in a new tab)
- CWE-606Name not in the CWE catalogue (opens in a new tab)
- CWE-839Name not in the CWE catalogue (opens in a new tab)
- CWE-915Name not in the CWE catalogue (opens in a new tab)
- CWE-1241Name not in the CWE catalogue (opens in a new tab)
- CWE-1287Name not in the CWE catalogue (opens in a new tab)
- GCVE source
- db.gcve.eu
- Csaf Category
- csaf_security_advisory
- Csaf Version
- 2.0
- Publisher
- Red Hat Product Security
- Advisory ID
- RHSA-2026:69255
- Vendor Severity
- high
- CVE Count
- 42
- Additional Cves
- CVE-2026-15792, CVE-2026-15927, CVE-2026-16221, CVE-2026-18255, CVE-2026-32283, CVE-2026-33818, CVE-2026-39822, CVE-2026-44705, CVE-2026-49477, CVE-2026-54058, CVE-2026-54060, CVE-2026-54770, CVE-2026-55379, CVE-2026-55380, CVE-2026-56852, CVE-2026-56853, CVE-2026-56858, CVE-2026-56859, CVE-2026-56860, CVE-2026-56862, CVE-2026-57231, CVE-2026-59197, CVE-2026-59199, CVE-2026-59200, CVE-2026-59204, CVE-2026-59205, CVE-2026-59869, CVE-2026-59879, CVE-2026-59885, CVE-2026-59886, CVE-2026-67213, CVE-2026-67214, CVE-2026-67313, CVE-2026-67314, CVE-2026-67320, CVE-2026-67321, CVE-2026-69152, CVE-2026-73086, CVE-2026-75593, CVE-2026-82417, CVE-2026-84375
References
- access.redhat.com/errata/RHSA-2026:69255 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-13149 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-15792 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-15927 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-16221 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-18255 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-32283 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-33818 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-39822 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-44705 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-49477 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-54058 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-54060 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-54770 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-55379 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-55380 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-56852 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-56853 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-56858 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-56859 (opens in a new tab)
Community reviews
Related threats
- Red Hat Security Advisory: Red Hat Update Infrastructure 5.3 Technology Preview security updateCriticalVulnerability
- Red Hat Security Advisory: A Subscription Management tool for finding and reporting Red Hat product usageHighVulnerability
- Red Hat Security Advisory: OpenShift Container Platform 4.17.57 bug fix and security updateHighVulnerability
- Red Hat Security Advisory: OpenShift Container Platform 4.12.97 bug fix and security updateHighVulnerability
- Red Hat Security Advisory: Red Hat Update Infrastructure 5.2 security updateHighVulnerability