Red Hat Security Advisory: Technical preview of the satellite/iop-vmaas-rhel9 container image
Affects Red HatSource GCVE Database
Not known to be exploited · CVSS 7.2 High →: upgrade Red Hat pyopenssl to 26.0.0 soon.
Data as of 26 Oct 2026, 17:59 UTC
- EPSS
- 0.7% chance of exploitation in 30 days – higher than 54% of CVEsExploit Prediction Scoring System: the likelihood attackers will use this flaw soon.
- Patch
- Available – fixed in 26.0.0
CVSS:4.0/AV:N/AC:H/AT:P/PR:N/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N/E:UBase metrics
- Attack Vector
- Network
- Attack Complexity
- High
- Attack Requirements
- Present
- Privileges Required
- None
- User Interaction
- None
- Vulnerable system confidentiality
- High
- Vulnerable system integrity
- High
- Vulnerable system availability
- High
- Subsequent system confidentiality
- None
- Subsequent system integrity
- None
- Subsequent system availability
- None
Threat metrics
- Exploit Maturity
- Unreported
Bold values are the worst case: easiest to exploit or largest impact.
- Attack Vector: Network
- The vulnerable system is bound to the network stack and the set of possible attackers extends beyond the other options listed below, up to and including the entire Internet. Such a vulnerability is often termed “remotely exploitable” and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
- Attack Complexity: High
- The successful attack depends on the evasion or circumvention of security-enhancing techniques in place that would otherwise hinder the attack. These include: Evasion of exploit mitigation techniques, for example, circumvention of address space randomization (ASLR) or data execution prevention (DEP) must be performed for the attack to be successful; Obtaining target-specific secrets. The attacker must gather some target-specific secret before the attack can be successful. A secret is any piece of information that cannot be obtained through any amount of reconnaissance. To obtain the secret the attacker must perform additional attacks or break otherwise secure measures (e.g. knowledge of a secret key may be needed to break a crypto channel). This operation must be performed for each attacked target.
- Attack Requirements: Present
- The successful attack depends on the presence of specific deployment and execution conditions of the vulnerable system that enable the attack. These include: a race condition must be won to successfully exploit the vulnerability (the successfulness of the attack is conditioned on execution conditions that are not under full control of the attacker, or the attack may need to be launched multiple times against a single target before being successful); the attacker must inject themselves into the logical network path between the target and the resource requested by the victim (e.g. vulnerabilities requiring an on-path attacker).
- Privileges Required: None
- The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files of the vulnerable system to carry out an attack.
- User Interaction: None
- The vulnerable system can be exploited without interaction from any human user, other than the attacker.
- Vulnerable system confidentiality: High
- There is a total loss of confidentiality, resulting in all information within the Vulnerable System being divulged to the attacker. Alternatively, access to only some restricted information is obtained, but the disclosed information presents a direct, serious impact. For example, an attacker steals the administrator's password, or private encryption keys of a web server.
- Vulnerable system integrity: High
- There is a total loss of integrity, or a complete loss of protection. For example, the attacker is able to modify any/all files protected by the vulnerable system. Alternatively, only some files can be modified, but malicious modification would present a direct, serious consequence to the vulnerable system.
- Vulnerable system availability: High
- There is a total loss of availability, resulting in the attacker being able to fully deny access to resources in the Vulnerable System; this loss is either sustained (while the attacker continues to deliver the attack) or persistent (the condition persists even after the attack has completed). Alternatively, the attacker has the ability to deny some availability, but the loss of availability presents a direct, serious consequence to the Vulnerable System (e.g., the attacker cannot disrupt existing connections, but can prevent new connections; the attacker can repeatedly exploit a vulnerability that, in each instance of a successful attack, leaks a only small amount of memory, but after repeated exploitation causes a service to become completely unavailable).
- Subsequent system confidentiality: None
- There is no loss of confidentiality within the Subsequent System or all confidentiality impact is constrained to the Vulnerable System.
- Subsequent system integrity: None
- There is no loss of integrity within the Subsequent System or all integrity impact is constrained to the Vulnerable System.
- Subsequent system availability: None
- There is no impact to availability within the Subsequent System or all availability impact is constrained to the Vulnerable System.
- Exploit Maturity: Unreported
- Based on threat intelligence sources each of the following must apply: · No knowledge of publicly available proof-of-concept · No knowledge of reported attempts to exploit this vulnerability · No knowledge of publicly available solutions used to simplify attempts to exploit the vulnerability
Definitions: FIRST CVSS v4.0 specification.
Exploitation evidence
Disclosed: evidence found.
CVE published 17 Mar 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponised: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors
A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 26 Oct 2026.
- Disclosed
- The CVE record is public on cve.org. Its publication is t = 0.
- Detectable
- A public nuclei template can find exposed instances, for defenders and attackers alike.
- Weaponised
- Public exploit code exists in Metasploit or Exploit-DB, or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
- Exploited in the wild
- CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
- Observed by OffSeq Mirage
- OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.
Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.
What to do
Upgrade pyopenssl to 26.0.0.
Affected software
| Product | Affected | Fixed in |
|---|---|---|
| pycapyopenssl | Affected
| Fixed in
|
PyPIpyopensslpkg:pypi/pyopensslOther threats | Affected
| Fixed in
|
Check your own hosts for these packages with threat-finder (opens in a new tab), our free open-source scanner.
Description
Red Hat Lightspeed in Satellite analyzes system health and configuration by applying predefined rules to a small set of local data, such as installed packages, running services, and configuration settings.
- CWE-120Buffer Copy without Checking Size of Input ('Classic Buffer Overflow') (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #11
The product copies an input buffer to an output buffer without verifying that the size of the input buffer is less than the size of the output buffer.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Operation · Build and Compilation · Environment Hardening
Use automatic buffer overflow detection mechanisms that are offered by certain compilers or compiler extensions. Examples include: the Microsoft Visual Studio /GS flag, Fedora/Red Hat FORTIFY_SOURCE GCC flag, StackGuard, and ProPolice, which provide various mechanisms including canary-based detection and range/index…
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-776Improper Restriction of Recursive Entity References in DTDs ('XML Entity Expansion') (opens in a new tab)
Base weaknessLikelihood of exploit: MediumOWASP Top 10 A02:2025: Security Misconfiguration (opens in a new tab)
The product uses XML documents and allows their structure to be defined with a Document Type Definition (DTD), but it does not properly control the number of recursive definitions of entities.
Operation
If possible, prohibit the use of DTDs or use an XML parser that limits the expansion of recursive DTD entities.
Implementation
Before parsing XML files with associated DTDs, scan for recursive entity declarations and do not continue parsing potentially explosive content.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
- Attack patterns
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-606Unchecked Input for Loop Condition (opens in a new tab)
Base weakness
The product does not properly check inputs that are used for loop conditions, potentially leading to a denial of service or other consequences because of excessive looping.
Implementation
Do not use user-controlled data for loop conditions.
Implementation
Perform input validation.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-88Improper Neutralization of Argument Delimiters in a Command ('Argument Injection') (opens in a new tab)
Base weaknessOWASP Top 10 A05:2025: Injection (opens in a new tab)
The product constructs a string for a command to be executed by a separate component in another control sphere, but it does not properly delimit the intended arguments, options, or switches within that command string.
Implementation · Parameterization
Where possible, avoid building a single string that contains the command and its arguments. Some languages or frameworks have functions that support specifying independent arguments, e.g. as an array, which is used to automatically perform the appropriate quoting or escaping while building the command.
Architecture and Design · Input Validation
Understand all the potential areas where untrusted inputs can enter your product: parameters or arguments, cookies, anything read from the network, environment variables, request headers as well as content, URL components, e-mail, files, databases, and any external systems that provide data to the application.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-1046Creation of Immutable Text Using String Concatenation (opens in a new tab)
Base weakness
The product creates an immutable text string using string concatenation operations.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-1050Excessive Platform Resource Consumption within a Loop (opens in a new tab)
Base weakness
The product has a loop body or loop condition that contains a control element that directly or indirectly consumes platform resources, e.g. messaging, sessions, locks, or file descriptors.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-1286Improper Validation of Syntactic Correctness of Input (opens in a new tab)
Base weakness
The product receives input that is expected to be well-formed - i.e., to comply with a certain syntax - but it does not validate or incorrectly validates that the input complies with the syntax.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-835Loop with Unreachable Exit Condition ('Infinite Loop') (opens in a new tab)
Base weakness
The product contains an iteration or loop with an exit condition that cannot be reached, i.e., an infinite loop.
- CWE-770Allocation of Resources Without Limits or Throttling (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #25
The product allocates a reusable resource or group of resources on behalf of an actor without imposing any intended restrictions on the size or number of resources that can be allocated.
Requirements
Clearly specify the minimum and maximum expectations for capabilities, and dictate which behaviors are acceptable when resource allocation reaches limits.
Architecture and Design
Limit the amount of resources that are accessible to unprivileged users. Set per-user limits for resources. Allow the system administrator to define these limits. Be careful to avoid CWE-410.
Architecture and Design
Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-79Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #1OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product does not neutralize or incorrectly neutralizes user-controllable input before it is placed in output that is used as a web page that is served to other users.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Implementation · Architecture and Design
Understand the context in which your data will be used and the encoding that will be expected. This is especially important when transmitting data between different components, or when generating outputs that can contain multiple encodings at the same time, such as web pages or multi-part mail messages.
Architecture and Design · Implementation · Attack Surface Reduction
Understand all the potential areas where untrusted inputs can enter your software: parameters or arguments, cookies, anything read from the network, environment variables, reverse DNS lookups, query results, request headers, URL components, e-mail, files, filenames, databases, and any external systems that provide…
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-914Improper Control of Dynamically-Identified Variables (opens in a new tab)
Base weakness
The product does not properly restrict reading from or writing to dynamically-identified variables.
Implementation · Input Validation
For any externally-influenced input, check the input against an allowlist of internal program variables that are allowed to be modified.
Implementation · Architecture and Design · Refactoring
Refactor the code so that internal program variables do not need to be dynamically identified.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-78Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #9OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product constructs all or part of an OS command using externally-influenced input from an upstream component, but it does not neutralize or incorrectly neutralizes special elements that could modify the intended OS command when it is sent to a downstream component.
Architecture and Design
If at all possible, use library calls rather than external processes to recreate the desired functionality.
Architecture and Design · Operation · Sandbox or Jail
Run the code in a "jail" or similar sandbox environment that enforces strict boundaries between the process and the operating system. This may effectively restrict which files can be accessed in a particular directory or which commands can be executed by the software.
Architecture and Design · Attack Surface Reduction
For any data that will be used to generate a command to be executed, keep as much of that data out of external control as possible. For example, in web applications, this may require storing the data locally in the session's state instead of sending it out to the client in a hidden form field.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-94Improper Control of Generation of Code ('Code Injection') (opens in a new tab)
Base weaknessLikelihood of exploit: MediumCWE Top 25 (2025): #10OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product constructs all or part of a code segment using externally-influenced input from an upstream component, but it does not neutralize or incorrectly neutralizes special elements that could modify the syntax or behavior of the intended code segment.
Architecture and Design · Refactoring
Refactor your program so that you do not have to dynamically generate code.
Architecture and Design
Run your code in a "jail" or similar sandbox environment that enforces strict boundaries between the process and the operating system. This may effectively restrict which code can be executed by your product.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-22Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #6OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product uses external input to construct a pathname that is intended to identify a file or directory that is located underneath a restricted parent directory, but the product does not properly neutralize special elements within the pathname that can cause the pathname to resolve to a location that is outside of the restricted directory.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Architecture and Design
For any security checks that are performed on the client side, ensure that these checks are duplicated on the server side, in order to avoid CWE-602. Attackers can bypass the client-side checks by modifying values after the checks have been performed, or by changing the client to remove the client-side checks…
Implementation · Input Validation
Inputs should be decoded and canonicalized to the application's current internal representation before being validated (CWE-180). Make sure that the application does not decode the same input twice (CWE-174).
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
- Attack patterns
- Path Traversal (opens in a new tab)
- Using Slashes and URL Encoding Combined to Bypass Validation Logic (opens in a new tab)
- Manipulating Web Input to File System Calls (opens in a new tab)
- Using Escaped Slashes in Alternate Encoding (opens in a new tab)
- Using Slashes in Alternate Encoding (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- GCVE source
- db.gcve.eu
- Csaf Category
- csaf_security_advisory
- Csaf Version
- 2.0
- Publisher
- Red Hat Product Security
- Advisory ID
- RHSA-2026:68780
- Vendor Severity
- critical
- CVE Count
- 27
- Additional Cves
- CVE-2026-33818, CVE-2026-39820, CVE-2026-42215, CVE-2026-42284, CVE-2026-42499, CVE-2026-42504, CVE-2026-44244, CVE-2026-56852, CVE-2026-56853, CVE-2026-56858, CVE-2026-56859, CVE-2026-56860, CVE-2026-56862, CVE-2026-73620, CVE-2026-73622, CVE-2026-73623, CVE-2026-73624, CVE-2026-73625, CVE-2026-76218, CVE-2026-76219, CVE-2026-76220, CVE-2026-76221, CVE-2026-76222, CVE-2026-78676, CVE-2026-78679, CVE-2026-87817
References
- access.redhat.com/errata/RHSA-2026:68780 (opens in a new tab)
- access.redhat.com/documentation/en-us/red_hat_satellite/6.19/html/updating_red_hat_satellite/index (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-27459 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-33818 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-39820 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-42215 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-42284 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-42499 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-42504 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-44244 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-56852 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-56853 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-56858 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-56859 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-56860 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-56862 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-73620 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-73622 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-73623 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-73624 (opens in a new tab)
Community reviews
Related threats
- Red Hat Security Advisory: Red Hat Update Infrastructure 5.3 Technology Preview security updateCriticalVulnerability
- Red Hat Security Advisory: Red Hat AI Inference 3.5.2 (cpu)CriticalVulnerability
- Red Hat Security Advisory: Red Hat AI Inference 3.5.2 (spyre)CriticalVulnerability
- Red Hat Security Advisory: Red Hat AI Inference 3.5.2 (cuda)CriticalVulnerability
- Red Hat Security Advisory: Red Hat AI Inference Tech Preview 3.5.2 (Gaudi)CriticalVulnerability