CVE-2026-6746VulnerabilityPublished 30 Apr 2026Updated 5 Nov 2026

Red Hat Security Advisory: thunderbird security update

Affects Red Hat thunderbirdSource GCVE Database

Compare

Mentioned vulnerabilities

Authoritative record:CVE-2026-6746· High 7.5

Not known to be exploited · CVSS 7.5 High · patch available : patch Red Hat thunderbird soon.

Data as of 6 Nov 2026, 01:33 UTC

CVSS 3.1 base score

7.5High

How severe the flaw is on the 0–10 CVSS scale.

Patch: Available

CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

Attack Vector: Network
Attack Complexity: Low
Privileges Required: None
User Interaction: None
Scope: Unchanged
Confidentiality: None
Integrity: None
Availability: High

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable component is bound to the network stack and the set of possible attackers extends beyond the other options listed, up to and including the entire Internet. Such a vulnerability is often termed 'remotely exploitable' and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: Low: Specialized access conditions or extenuating circumstances do not exist. An attacker can expect repeatable success against the vulnerable component.
Privileges Required: None: The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files to carry out an attack.
User Interaction: None: The vulnerable system can be exploited without any interaction from any user.
Scope: Unchanged: An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
Confidentiality: None: There is no loss of confidentiality within the impacted component.
Integrity: None: There is no loss of integrity within the impacted component.
Availability: High: There is total loss of availability, resulting in the attacker being able to fully deny access to resources in the impacted component; this loss is either sustained (while the attacker continues to deliver the attack) or persistent (the condition persists even after the attack has completed). Alternatively, the attacker has the ability to deny some availability, but the loss of availability presents a direct, serious consequence to the impacted component (e.g., the attacker cannot disrupt existing connections, but can prevent new connections; the attacker can repeatedly exploit a vulnerability that, in each instance of a successful attack, leaks a only small amount of memory, but after repeated exploitation causes a service to become completely unavailable).

Definitions: FIRST CVSS v3.1 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 21 Apr 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponized: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 5 Nov 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponized: A Metasploit exploit module or Exploit-DB entry exists (Metasploit scanner modules do not count), or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

Affected software

Product	Affected	Fixed in
Red Hat Product Security Red Hat	Affected <150	Fixed in 150

AI-suggested

A security update for Thunderbird is available from Red Hat for Red Hat Enterprise Linux 10 and its extended support variants. Users should apply the update as described in the Red Hat advisory RHSA-2026:12285 to remediate these vulnerabilities. The update includes fixes incorporated in Thunderbird ESR 140.10 and Thunderbird 150. No additional mitigation steps beyond applying the official update are indicated.

Description

Multiple security vulnerabilities affecting Mozilla Thunderbird have been addressed in a Red Hat security advisory. These include use-after-free, incorrect boundary conditions, privilege escalation, information disclosure, mitigation bypass, and memory safety bugs across various components such as NSS libraries, JavaScript engine, DOM, WebRTC, Graphics, and Web Codecs. The update fixes these issues in Thunderbird ESR 140.10 and Thunderbird 150, among others.

Impact

The vulnerabilities collectively pose risks such as privilege escalation, information disclosure, spoofing, and memory safety issues that could be exploited to compromise the confidentiality, integrity, or availability of the Thunderbird mail client. The presence of use-after-free and mitigation bypass vulnerabilities increases the potential for exploitation leading to arbitrary code execution or security bypass. The advisory rates the overall impact as Important (high severity).

CWE-825Expired Pointer Dereference (opens in a new tab)
Base weakness
The product dereferences a pointer that contains a location for memory that was previously valid, but is no longer valid.
Architecture and Design
Choose a language that provides automatic memory management.
Implementation
When freeing pointers, be sure to set them to NULL once they are freed. However, the utilization of multiple or complex data structures may lower the usefulness of this strategy.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-824Access of Uninitialized Pointer (opens in a new tab)
Base weakness
The product accesses or uses a pointer that has not been initialized.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-266Incorrect Privilege Assignment (opens in a new tab)
Base weaknessOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
A product incorrectly assigns a privilege to a particular actor, creating an unintended sphere of control for that actor.
Architecture and Design · Operation
Very carefully manage the setting, management, and handling of privileges. Explicitly manage trust zones in the software.
Architecture and Design · Operation · Environment Hardening
Run your code using the lowest privileges that are required to accomplish the necessary tasks. If possible, create isolated accounts with limited privileges that are only used for a single task. That way, a successful attack will not immediately give the attacker access to the rest of the software or its environment.
OWASP Cheat Sheets
Docker Security (opens in a new tab)
Third Party Javascript Management (opens in a new tab)
Virtual Patching (opens in a new tab)
Secure Design Principles (opens in a new tab)
OWASP ASVS 4.0.3
V1.4.4 (opens in a new tab)
V1.4.5 (opens in a new tab)
V1.10.1 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-131Incorrect Calculation of Buffer Size (opens in a new tab)
Base weaknessLikelihood of exploit: High
The product does not correctly calculate the size to be used when allocating a buffer.
Implementation
When allocating a buffer for the purpose of transforming, converting, or encoding an input, allocate enough memory to handle the largest possible encoding. For example, in a routine that converts "&" characters to "&" for HTML entity encoding, the output buffer needs to be at least 5 times as large as the input…
Implementation
Understand the programming language's underlying representation and how it interacts with numeric calculation (CWE-681). Pay close attention to byte size discrepancies, precision, signed/unsigned distinctions, truncation, conversion and casting between types, "not-a-number" calculations, and how the language handles…
Implementation · Input Validation
Perform input validation on any numeric input by ensuring that it is within the expected range. Enforce that the input meets both the minimum and maximum requirements for the expected range.
Attack patterns
Overflow Buffers (opens in a new tab)
Buffer Overflow via Parameter Expansion (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-787Out-of-bounds Write (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #5
The product writes data past the end, or before the beginning, of the intended buffer.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Operation · Build and Compilation · Environment Hardening
Use automatic buffer overflow detection mechanisms that are offered by certain compilers or compiler extensions. Examples include: the Microsoft Visual Studio /GS flag, Fedora/Red Hat FORTIFY_SOURCE GCC flag, StackGuard, and ProPolice, which provide various mechanisms including canary-based detection and range/index…
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-823Use of Out-of-range Pointer Offset (opens in a new tab)
Base weakness
The product performs pointer arithmetic on a valid pointer, but it uses an offset that can point outside of the intended range of valid memory locations for the resulting pointer.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
Attack patterns
Pointer Manipulation (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-1021Improper Restriction of Rendered UI Layers or Frames (opens in a new tab)
Base weaknessOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The web application does not restrict or incorrectly restricts frame objects or UI layers that belong to another application or domain.
Implementation
Use the "frame-ancestors" directive in the Content Security Policy, which is intended to define restrictions when it comes to allowing embedded content.
Implementation
The use of X-Frame-Options (now partially obsolete as of September 2026) allows developers of web content to restrict the usage of their application within the form of overlays, frames, or iFrames. The developer can indicate from which domains can frame the content.
Implementation
Use a "frame-breaker" script in each page that should not be framed. This is very helpful for legacy browsers that do not support the X-Frame-Options security feature previously mentioned (which is now partially obsolete).
OWASP Cheat Sheets
Content Security Policy (opens in a new tab)
Secure Design Principles (opens in a new tab)
OWASP ASVS 4.0.3
V14.4.3 (opens in a new tab)
V14.4.7 (opens in a new tab)
Attack patterns
Clickjacking (opens in a new tab)
Flash File Overlay (opens in a new tab)
iFrame Overlay (opens in a new tab)
Task Impersonation (opens in a new tab)
Tapjacking (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-66Improper Handling of File Names that Identify Virtual Resources (opens in a new tab)
Base weakness
The product does not handle or incorrectly handles a file name that identifies a "virtual" resource that is not directly specified within the directory that is associated with the file name.
CWE-805Buffer Access with Incorrect Length Value (opens in a new tab)
Base weaknessLikelihood of exploit: High
The product uses a sequential operation to read or write a buffer, but it uses an incorrect length value that causes it to access memory that is outside of the bounds of the buffer.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Operation · Build and Compilation · Environment Hardening
Use automatic buffer overflow detection mechanisms that are offered by certain compilers or compiler extensions. Examples include: the Microsoft Visual Studio /GS flag, Fedora/Red Hat FORTIFY_SOURCE GCC flag, StackGuard, and ProPolice, which provide various mechanisms including canary-based detection and range/index…
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
Attack patterns
Overflow Buffers (opens in a new tab)
SOAP Array Overflow (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-359Exposure of Private Personal Information to an Unauthorized Actor (opens in a new tab)
Base weaknessOWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product does not properly prevent a person's private, personal information from being accessed by actors who either (1) are not explicitly authorized to access the information or (2) do not have the implicit consent of the person about whom the information is collected.
Requirements
Identify and consult all relevant regulations for personal privacy. An organization may be required to comply with certain federal and state regulations, depending on its location, the type of business it conducts, and the nature of any private data it handles.
Architecture and Design
Carefully evaluate how secure design may interfere with privacy, and vice versa. Security and privacy concerns often seem to compete with each other. From a security perspective, all important operations should be recorded so that any anomalous activity can later be identified.
Implementation · Operation · Attack Surface Reduction
Some tools can automatically analyze documents to redact, strip, or "sanitize" private information, although some human review might be necessary. Tools may vary in terms of which document formats can be processed.
OWASP Cheat Sheets
Error Handling (opens in a new tab)
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V10.2.1 (opens in a new tab)
V8.3.4 (opens in a new tab)
V14.3.3 (opens in a new tab)
Attack patterns
Evercookie (opens in a new tab)
Cross Site Identification (opens in a new tab)
Probe iOS Screenshots (opens in a new tab)
Shoulder Surfing (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-125Out-of-bounds Read (opens in a new tab)
Base weaknessCWE Top 25 (2025): #8
The product reads data past the end, or before the beginning, of the intended buffer.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Architecture and Design · Language Selection
Use a language that provides appropriate memory abstractions.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
Attack patterns
Overread Buffers (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-676Use of Potentially Dangerous Function (opens in a new tab)
Base weaknessLikelihood of exploit: HighOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The product invokes a potentially dangerous function that could introduce a vulnerability if it is used incorrectly, but the function can also be used safely.
Build and Compilation · Implementation
Identify a list of prohibited API functions and prohibit developers from using these functions, providing safer alternatives. In some cases, automatic code analysis tools or the compiler can be instructed to spot use of prohibited functions, such as the "banned.h" include file from Microsoft's SDL.
OWASP Cheat Sheets
Secure Design Principles (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-440Expected Behavior Violation (opens in a new tab)
Base weakness
A feature, API, or function does not perform according to its specification.
CWE-358Improperly Implemented Security Check for Standard (opens in a new tab)
Base weakness
The product does not implement or incorrectly implements one or more security-relevant checks as specified by the design of a standardized algorithm, protocol, or technique.

GCVE source: db.gcve.eu
Csaf Category: csaf_security_advisory
Csaf Version: 2.0
Publisher: Red Hat Product Security
Advisory ID: RHSA-2026:12285
Vendor Severity: high
CVE Count: 25
Additional Cves: CVE-2026-6747, CVE-2026-6748, CVE-2026-6749, CVE-2026-6750, CVE-2026-6751, CVE-2026-6752, CVE-2026-6753, CVE-2026-6754, CVE-2026-6757, CVE-2026-6759, CVE-2026-6761, CVE-2026-6762, CVE-2026-6763, CVE-2026-6764, CVE-2026-6765, CVE-2026-6766, CVE-2026-6767, CVE-2026-6769, CVE-2026-6770, CVE-2026-6771, CVE-2026-6772, CVE-2026-6776, CVE-2026-6785, CVE-2026-6786

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Affected software

Description

AI analysisMachine-generated, updated 6 Nov 2026, 01:33 UTC

WeaknessesCWE-825, CWE-824, CWE-266 +11

Technical details

References

Community reviews

Related threats