CVE-2026-96869VulnerabilityPublished 19 Oct 2026Updated 26 Oct 2026

Red Hat Security Advisory: thunderbird security update

Affects Red Hat thunderbirdSource GCVE Database

Mentioned vulnerabilities

Authoritative record:CVE-2026-96869· Medium 4.3

Not known to be exploited · CVSS 4.3 Medium.

Data as of 26 Oct 2026, 17:59 UTC

CVSS 3.1 base score

4.3Medium

How severe the flaw is on the 0–10 CVSS scale.

CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:L/I:N/A:N

Attack Vector: Network
Attack Complexity: Low
Privileges Required: None
User Interaction: Required
Scope: Unchanged
Confidentiality: Low
Integrity: None
Availability: None

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable component is bound to the network stack and the set of possible attackers extends beyond the other options listed, up to and including the entire Internet. Such a vulnerability is often termed 'remotely exploitable' and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: Low: Specialized access conditions or extenuating circumstances do not exist. An attacker can expect repeatable success against the vulnerable component.
Privileges Required: None: The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files to carry out an attack.
User Interaction: Required: Successful exploitation of this vulnerability requires a user to take some action before the vulnerability can be exploited.
Scope: Unchanged: An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
Confidentiality: Low: There is some loss of confidentiality. Access to some restricted information is obtained, but the attacker does not have control over what information is obtained, or the amount or kind of loss is limited. The information disclosure does not cause a direct, serious loss to the impacted component.
Integrity: None: There is no loss of integrity within the impacted component.
Availability: None: There is no impact to availability within the impacted component.

Definitions: FIRST CVSS v3.1 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 29 Sep 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponised: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 26 Oct 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponised: Public exploit code exists in Metasploit or Exploit-DB, or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

Affected software

Product	Affected	Fixed in
Red Hat Product Security Red Hat	Affected <153.4 <157 <140.17	Fixed in 153.4 157 140.17

Description

Mozilla Thunderbird is a standalone mail and newsgroup client. Security Fix(es): * firefox: thunderbird: Use-after-free in the Graphics: Canvas2D component (CVE-2026-100832) * firefox: Use-after-free in the Layout: Text and Fonts component (CVE-2026-100784) * firefox: thunderbird: Privilege escalation in the DLL Services component (CVE-2026-100801) * firefox: thunderbird: Sandbox escape due to incorrect boundary conditions in the Internationalization component (CVE-2026-100794) * firefox: thunderbird: Privilege escalation in the Address Bar component (CVE-2026-100820) * firefox: thunderbird: Use-after-free in the Graphics: Canvas2D component (CVE-2026-100777) * firefox: thunderbird: Information disclosure in the Networking: JAR component (CVE-2026-100766) * firefox: thunderbird: Use-after-free in the XSLT component (CVE-2026-100779) * firefox: thunderbird: Privilege escalation in the DOM: Service Workers component (CVE-2026-100807) * firefox: thunderbird: JIT miscompilation in the JavaScript: WebAssembly component (CVE-2026-100792) * firefox: Privilege escalation due to use-after-free in the Graphics: WebRender component (CVE-2026-100797) * firefox: thunderbird: Sandbox escape due to incorrect boundary conditions in the XPCOM component (CVE-2026-100819) * firefox: thunderbird: Use-after-free in the JavaScript: WebAssembly component (CVE-2026-100776) * firefox: thunderbird: Use-after-free in the Widget component (CVE-2026-100757) * firefox: Sandbox escape due to use-after-free in the Graphics component (CVE-2026-100786) * firefox: thunderbird: Information disclosure in the Networking component (CVE-2026-96869) * firefox: Sandbox escape due to use-after-free in the DOM: Content Processes component (CVE-2026-100770) * firefox: thunderbird: Use-after-free in the JavaScript: WebAssembly component (CVE-2026-100769) * firefox: Use-after-free in the DOM: Core & HTML component (CVE-2026-100791) * firefox: thunderbird: Sandbox escape due to use-after-free in the Widget: Gtk component (CVE-2026-100818) * firefox: thunderbird: Privilege escalation due to incorrect boundary conditions in the Graphics component (CVE-2026-100782) * firefox: firefox: Sandbox escape via use-after-free in DOM component (CVE-2026-100811) * firefox: thunderbird: Use-after-free in the DOM: Core & HTML component (CVE-2026-100772) * firefox: thunderbird: Uninitialized memory in the Storage: Quota Manager component (CVE-2026-100759) * firefox: Sandbox escape due to use-after-free in the DOM: Core & HTML component (CVE-2026-100778) * firefox: thunderbird: Sandbox escape in the DOM: Navigation component (CVE-2026-100758) * firefox: thunderbird: Sandbox escape in the Graphics component (CVE-2026-100775) * firefox: thunderbird: Sandbox escape due to incorrect boundary conditions in the Graphics: WebRender component (CVE-2026-100781) * firefox: Use-after-free in the DOM: Core & HTML component (CVE-2026-100774) * firefox: thunderbird: Same-origin policy bypass in the WebExtensions component (CVE-2026-100803) * firefox: thunderbird: Use-after-free in the Graphics: Canvas2D component (CVE-2026-100789) * firefox: thunderbird: Use-after-free in the DOM: Core & HTML component (CVE-2026-100785) * firefox: thunderbird: Site isolation issue in the Panning and Zooming component (CVE-2026-100821) * firefox: thunderbird: Invalid pointer in the JavaScript: WebAssembly component (CVE-2026-100788) * firefox: thunderbird: Undefined behavior in the DOM: Streams component (CVE-2026-100771) * firefox: Sandbox escape due to use-after-free in the DOM: Content Processes component (CVE-2026-100762) * firefox: thunderbird: Use-after-free in the XSLT component (CVE-2026-100790) * firefox: thunderbird: Use-after-free in the Storage: IndexedDB component (CVE-2026-100773) * firefox: thunderbird: Use-after-free in the DOM: Core & HTML component (CVE-2026-100780) * firefox: thunderbird: Use-after-free in the Networking: Cache component (CVE-2026-100767) * firefox: thunderbird: Incorrect boundary conditions in the Audio/Video: Playback component (CVE-2026-100756) * firefox: thunderbird: Uninitialized memory in the Audio/Video component (CVE-2026-100783) For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.

CWE-201Insertion of Sensitive Information Into Sent Data (opens in a new tab)
Base weaknessOWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The code transmits data to another actor, but a portion of the data includes sensitive information that should not be accessible to that actor.
Requirements
Specify which data in the software should be regarded as sensitive. Consider which types of users should have access to which types of data.
Implementation
Ensure that any possibly sensitive data specified in the requirements is verified with designers to ensure that it is either a calculated risk or mitigated elsewhere.
System Configuration
Setup default error messages so that unexpected errors do not disclose sensitive information.
OWASP Cheat Sheets
Error Handling (opens in a new tab)
Logging (opens in a new tab)
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V8.3.4 (opens in a new tab)
V14.3.3 (opens in a new tab)
V7.3.3 (opens in a new tab)
Attack patterns
Choosing Message Identifier (opens in a new tab)
Exploiting Incorrectly Configured SSL/TLS (opens in a new tab)
WiFi MAC Address Tracking (opens in a new tab)
WiFi SSID Tracking (opens in a new tab)
Cellular Broadcast Message Request (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-119Improper Restriction of Operations within the Bounds of a Memory Buffer (opens in a new tab)
Class weaknessLikelihood of exploit: High
The product performs operations on a memory buffer, but it reads from or writes to a memory location outside the buffer's intended boundary. This may result in read or write operations on unexpected memory locations that could be linked to other variables, data structures, or internal program data.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Operation · Build and Compilation · Environment Hardening
Use automatic buffer overflow detection mechanisms that are offered by certain compilers or compiler extensions. Examples include: the Microsoft Visual Studio /GS flag, Fedora/Red Hat FORTIFY_SOURCE GCC flag, StackGuard, and ProPolice, which provide various mechanisms including canary-based detection and range/index…
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
Attack patterns
Buffer Overflow via Environment Variables (opens in a new tab)
Overflow Buffers (opens in a new tab)
Client-side Injection-induced Buffer Overflow (opens in a new tab)
Filter Failure through Buffer Overflow (opens in a new tab)
MIME Conversion (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-416Use After Free (opens in a new tab)
Variant weaknessLikelihood of exploit: HighCWE Top 25 (2025): #7
The product reuses or references memory after it has been freed. At some point afterward, the memory may be allocated again and saved in another pointer, while the original pointer references a location somewhere within the new allocation. Any operations using the original pointer are no longer valid because the memory "belongs" to the code that operates on the new pointer.
Architecture and Design · Language Selection
Choose a language that provides automatic memory management.
Implementation · Attack Surface Reduction
When freeing pointers, be sure to set them to NULL once they are freed. However, the utilization of multiple or complex data structures may lower the usefulness of this strategy.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-284Improper Access Control (opens in a new tab)
Pillar weaknessCWE Top 25 (2025): #19OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product does not restrict or incorrectly restricts access to a resource from an unauthorized actor.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
Architecture and Design · Operation
Very carefully manage the setting, management, and handling of privileges. Explicitly manage trust zones in the software.
Architecture and Design · Separation of Privilege
Compartmentalize the system to have "safe" areas where trust boundaries can be unambiguously drawn. Do not allow sensitive data to go outside of the trust boundary and always be careful when interfacing with a compartment outside of the safe area.
OWASP Cheat Sheets
Docker Security (opens in a new tab)
Third Party Javascript Management (opens in a new tab)
Virtual Patching (opens in a new tab)
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V1.4.4 (opens in a new tab)
V1.4.5 (opens in a new tab)
V1.10.1 (opens in a new tab)
Attack patterns
Embedding Scripts within Scripts (opens in a new tab)
Modification of Windows Service Configuration (opens in a new tab)
Malicious Root Certificate (opens in a new tab)
Intent Spoof (opens in a new tab)
WebView Exposure (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-457Use of Uninitialized Variable (opens in a new tab)
Variant weaknessLikelihood of exploit: High
The code uses a variable that has not been initialized, leading to unpredictable or unintended results.
Implementation · Attack Surface Reduction
Ensure that critical variables are initialized before first use.
Build and Compilation · Compilation or Build Hardening
Most compilers will complain about the use of uninitialized variables if warnings are turned on.
Implementation · Operation
When using a language that does not require explicit declaration of variables, run or compile the software in a mode that reports undeclared or unknown variables. This may indicate the presence of a typographic error in the variable's name.
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-825Expired Pointer Dereference (opens in a new tab)
Base weakness
The product dereferences a pointer that contains a location for memory that was previously valid, but is no longer valid.
Architecture and Design
Choose a language that provides automatic memory management.
Implementation
When freeing pointers, be sure to set them to NULL once they are freed. However, the utilization of multiple or complex data structures may lower the usefulness of this strategy.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-200Exposure of Sensitive Information to an Unauthorized Actor (opens in a new tab)
Class weaknessLikelihood of exploit: HighCWE Top 25 (2025): #20OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product exposes sensitive information to an actor that is not explicitly authorized to have access to that information.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
Architecture and Design · Separation of Privilege
Compartmentalize the system to have "safe" areas where trust boundaries can be unambiguously drawn. Do not allow sensitive data to go outside of the trust boundary and always be careful when interfacing with a compartment outside of the safe area.
OWASP Cheat Sheets
Error Handling (opens in a new tab)
Logging (opens in a new tab)
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V8.3.4 (opens in a new tab)
V14.3.3 (opens in a new tab)
V7.3.3 (opens in a new tab)
Attack patterns
Subverting Environment Variable Values (opens in a new tab)
ICMP Echo Request Ping (opens in a new tab)
TCP SYN Scan (opens in a new tab)
Enumerate Mail Exchange (MX) Records (opens in a new tab)
DNS Zone Transfers (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-758Reliance on Undefined, Unspecified, or Implementation-Defined Behavior (opens in a new tab)
Class weakness
The product uses an API function, data structure, or other entity in a way that relies on properties that are not always guaranteed to hold for that entity.
CWE-693Protection Mechanism Failure (opens in a new tab)
Pillar weaknessOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The product does not use or incorrectly uses a protection mechanism that provides sufficient defense against directed attacks against the product.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
OWASP Cheat Sheets
Secure Design Principles (opens in a new tab)
Attack patterns
Accessing Functionality Not Properly Constrained by ACLs (opens in a new tab)
Cross Site Tracing (opens in a new tab)
Directory Indexing (opens in a new tab)
Using Malicious Files (opens in a new tab)
Encryption Brute Forcing (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-908Use of Uninitialized Resource (opens in a new tab)
Base weaknessLikelihood of exploit: Medium
The product uses or accesses a resource that has not been initialized.
Implementation
Explicitly initialize the resource before use. If this is performed through an API function or standard procedure, follow all required steps.
Implementation
Pay close attention to complex conditionals that affect initialization, since some branches might not perform the initialization.
Implementation
Avoid race conditions (CWE-362) during initialization routines.
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-824Access of Uninitialized Pointer (opens in a new tab)
Base weakness
The product accesses or uses a pointer that has not been initialized.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-843Access of Resource Using Incompatible Type ('Type Confusion') (opens in a new tab)
Base weakness
The product allocates or initializes a resource such as a pointer, object, or variable using one type, but it later accesses that resource using a type that is incompatible with the original type.
CWE-269Improper Privilege Management (opens in a new tab)
Class weaknessLikelihood of exploit: MediumOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The product does not properly assign, modify, track, or check privileges for an actor, creating an unintended sphere of control for that actor.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
Architecture and Design · Operation
Very carefully manage the setting, management, and handling of privileges. Explicitly manage trust zones in the software.
Architecture and Design · Separation of Privilege
Follow the principle of least privilege when assigning access rights to entities in a software system.
Architecture and Design · Separation of Privilege
Consider following the principle of separation of privilege. Require multiple conditions to be met before permitting access to a system resource.
OWASP Cheat Sheets
Docker Security (opens in a new tab)
Third Party Javascript Management (opens in a new tab)
Virtual Patching (opens in a new tab)
Secure Design Principles (opens in a new tab)
OWASP ASVS 4.0.3
V1.4.4 (opens in a new tab)
V1.4.5 (opens in a new tab)
V1.10.1 (opens in a new tab)
Attack patterns
Restful Privilege Elevation (opens in a new tab)
Privilege Abuse (opens in a new tab)
Privilege Escalation (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-346Origin Validation Error (opens in a new tab)
Class weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
The product does not properly verify that the source of data or communication is valid.
OWASP Cheat Sheets
OWASP Authentication (opens in a new tab)
OWASP ASVS 4.0.3
V14.5.2 (opens in a new tab)
V14.5.3 (opens in a new tab)
V1.4.4 (opens in a new tab)
Attack patterns
JSON Hijacking (aka JavaScript Hijacking) (opens in a new tab)
Cache Poisoning (opens in a new tab)
DNS Cache Poisoning (opens in a new tab)
Exploit Script-Based APIs (opens in a new tab)
Application API Message Manipulation via Man-in-the-Middle (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-15External Control of System or Configuration Setting (opens in a new tab)
Base weaknessOWASP Top 10 A02:2025: Security Misconfiguration (opens in a new tab)
One or more system settings or configuration elements can be externally controlled by a user.
Architecture and Design · Separation of Privilege
Compartmentalize the system to have "safe" areas where trust boundaries can be unambiguously drawn. Do not allow sensitive data to go outside of the trust boundary and always be careful when interfacing with a compartment outside of the safe area.
Implementation · Architecture and Design
Because setting manipulation covers a diverse set of functions, any attempt at illustrating it will inevitably be incomplete. Rather than searching for a tight-knit relationship between the functions addressed in the setting manipulation category, take a step back and consider the sorts of system values that an…
Implementation · Architecture and Design
In general, do not allow user-provided or otherwise untrusted data to control sensitive values. The leverage that an attacker gains by controlling these values is not always immediately obvious, but do not underestimate the creativity of the attacker.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
Attack patterns
Subverting Environment Variable Values (opens in a new tab)
XML Schema Poisoning (opens in a new tab)
Manipulate Registry Information (opens in a new tab)
Modification of Registry Run Keys (opens in a new tab)
Schema Poisoning (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

GCVE source: db.gcve.eu
Csaf Category: csaf_security_advisory
Csaf Version: 2.0
Publisher: Red Hat Product Security
Advisory ID: RHSA-2026:85240
Vendor Severity: high
CVE Count: 42
Additional Cves: CVE-2026-100756, CVE-2026-100757, CVE-2026-100758, CVE-2026-100759, CVE-2026-100762, CVE-2026-100766, CVE-2026-100767, CVE-2026-100769, CVE-2026-100770, CVE-2026-100771, CVE-2026-100772, CVE-2026-100773, CVE-2026-100774, CVE-2026-100775, CVE-2026-100776, CVE-2026-100777, CVE-2026-100778, CVE-2026-100779, CVE-2026-100780, CVE-2026-100781, CVE-2026-100782, CVE-2026-100783, CVE-2026-100784, CVE-2026-100785, CVE-2026-100786, CVE-2026-100788, CVE-2026-100789, CVE-2026-100790, CVE-2026-100791, CVE-2026-100792, CVE-2026-100794, CVE-2026-100797, CVE-2026-100801, CVE-2026-100803, CVE-2026-100807, CVE-2026-100811, CVE-2026-100818, CVE-2026-100819, CVE-2026-100820, CVE-2026-100821, CVE-2026-100832

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Affected software

Description

WeaknessesCWE-201, CWE-119, CWE-416 +12

Technical details

References

Community reviews

Related threats