Red Hat Security Advisory: webkit2gtk3 security update
Affects Red Hat webkit2gtk3Source GCVE Database
Mentioned vulnerabilities
Not known to be exploited · CVSS 6.5 Medium.
Data as of 26 Oct 2026, 10:12 UTC
- EPSS
- 0.4% chance of exploitation in 30 days – higher than 38% of CVEsExploit Prediction Scoring System: the likelihood attackers will use this flaw soon.
CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H- Attack Vector
- Network
- Attack Complexity
- Low
- Privileges Required
- None
- User Interaction
- Required
- Scope
- Unchanged
- Confidentiality
- None
- Integrity
- None
- Availability
- High
Bold values are the worst case: easiest to exploit or largest impact.
- Attack Vector: Network
- The vulnerable component is bound to the network stack and the set of possible attackers extends beyond the other options listed, up to and including the entire Internet. Such a vulnerability is often termed 'remotely exploitable' and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
- Attack Complexity: Low
- Specialized access conditions or extenuating circumstances do not exist. An attacker can expect repeatable success against the vulnerable component.
- Privileges Required: None
- The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files to carry out an attack.
- User Interaction: Required
- Successful exploitation of this vulnerability requires a user to take some action before the vulnerability can be exploited.
- Scope: Unchanged
- An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
- Confidentiality: None
- There is no loss of confidentiality within the impacted component.
- Integrity: None
- There is no loss of integrity within the impacted component.
- Availability: High
- There is total loss of availability, resulting in the attacker being able to fully deny access to resources in the impacted component; this loss is either sustained (while the attacker continues to deliver the attack) or persistent (the condition persists even after the attack has completed). Alternatively, the attacker has the ability to deny some availability, but the loss of availability presents a direct, serious consequence to the impacted component (e.g., the attacker cannot disrupt existing connections, but can prevent new connections; the attacker can repeatedly exploit a vulnerability that, in each instance of a successful attack, leaks a only small amount of memory, but after repeated exploitation causes a service to become completely unavailable).
Definitions: FIRST CVSS v3.1 specification.
Exploitation evidence
Disclosed: evidence found.
CVE published 10 Mar 2025
Detectable: no evidence on record.
No public nuclei template indexed
Weaponised: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors
A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 26 Oct 2026.
- Disclosed
- The CVE record is public on cve.org. Its publication is t = 0.
- Detectable
- A public nuclei template can find exposed instances, for defenders and attackers alike.
- Weaponised
- Public exploit code exists in Metasploit or Exploit-DB, or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
- Exploited in the wild
- CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
- Observed by OffSeq Mirage
- OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.
Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.
What to do
AI-suggested
Red Hat has released updated webkit2gtk3 packages for Red Hat Enterprise Linux 8.2 AUS to address these vulnerabilities. Users should apply this security update after ensuring all previous errata relevant to their system are applied. A system reboot may be required for the update to take effect. No additional mitigation steps are indicated by the vendor advisory.
Description
Multiple security vulnerabilities have been identified in webkit2gtk3, the GTK port of the WebKit web rendering engine. These include issues that may cause unexpected process crashes, denial-of-service conditions, cross-site scripting attacks, and cross-origin data exfiltration. The vulnerabilities affect processing of maliciously crafted web content and loading of malicious iframes. Red Hat has issued a security advisory for Red Hat Enterprise Linux 8.2 Advanced Update Support addressing these issues.
Impact
Successful exploitation of these vulnerabilities could lead to denial-of-service conditions through process crashes, unauthorized data exfiltration across origins, and cross-site scripting attacks. These impacts could compromise the confidentiality and availability of affected systems running vulnerable versions of webkit2gtk3 on Red Hat Enterprise Linux 8.2 AUS. There are no known exploits in the wild at the time of the advisory.
- CWE-20Improper Input Validation (opens in a new tab)
Class weaknessLikelihood of exploit: HighCWE Top 25 (2025): #18OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product receives input or data, but it does not validate or incorrectly validates that the input has the properties that are required to process the data safely and correctly.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
Architecture and Design · Attack Surface Reduction
Consider using language-theoretic security (LangSec) techniques that characterize inputs using a formal language and build "recognizers" for that language. This effectively requires parsing to be a distinct layer that effectively enforces a boundary between raw input and internal data representations, instead of…
Architecture and Design · Libraries or Frameworks
Use an input validation framework such as Struts or the OWASP ESAPI Validation API. Note that using a framework does not automatically address all input validation problems; be mindful of weaknesses that could arise from misusing the framework itself (CWE-1173).
Architecture and Design · Implementation · Attack Surface Reduction
Understand all the potential areas where untrusted inputs can enter the product, including but not limited to: parameters or arguments, cookies, anything read from the network, environment variables, reverse DNS lookups, query results, request headers, URL components, e-mail, files, filenames, databases, and any…
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-200Exposure of Sensitive Information to an Unauthorized Actor (opens in a new tab)
Class weaknessLikelihood of exploit: HighCWE Top 25 (2025): #20OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product exposes sensitive information to an actor that is not explicitly authorized to have access to that information.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
Architecture and Design · Separation of Privilege
Compartmentalize the system to have "safe" areas where trust boundaries can be unambiguously drawn. Do not allow sensitive data to go outside of the trust boundary and always be careful when interfacing with a compartment outside of the safe area.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-119Improper Restriction of Operations within the Bounds of a Memory Buffer (opens in a new tab)
Class weaknessLikelihood of exploit: High
The product performs operations on a memory buffer, but it reads from or writes to a memory location outside the buffer's intended boundary. This may result in read or write operations on unexpected memory locations that could be linked to other variables, data structures, or internal program data.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Operation · Build and Compilation · Environment Hardening
Use automatic buffer overflow detection mechanisms that are offered by certain compilers or compiler extensions. Examples include: the Microsoft Visual Studio /GS flag, Fedora/Red Hat FORTIFY_SOURCE GCC flag, StackGuard, and ProPolice, which provide various mechanisms including canary-based detection and range/index…
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-129Improper Validation of Array Index (opens in a new tab)
Variant weaknessLikelihood of exploit: HighOWASP Top 10 A05:2025: Injection (opens in a new tab)
The product uses untrusted input when calculating or using an array index, but the product does not validate or incorrectly validates the index to ensure the index references a valid position within the array.
Architecture and Design · Input Validation
Use an input validation framework such as Struts or the OWASP ESAPI Validation API. Note that using a framework does not automatically address all input validation problems; be mindful of weaknesses that could arise from misusing the framework itself (CWE-1173).
Architecture and Design
For any security checks that are performed on the client side, ensure that these checks are duplicated on the server side, in order to avoid CWE-602. Attackers can bypass the client-side checks by modifying values after the checks have been performed, or by changing the client to remove the client-side checks…
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
- OWASP Cheat Sheets
- Attack patterns
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-79Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #1OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product does not neutralize or incorrectly neutralizes user-controllable input before it is placed in output that is used as a web page that is served to other users.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Implementation · Architecture and Design
Understand the context in which your data will be used and the encoding that will be expected. This is especially important when transmitting data between different components, or when generating outputs that can contain multiple encodings at the same time, such as web pages or multi-part mail messages.
Architecture and Design · Implementation · Attack Surface Reduction
Understand all the potential areas where untrusted inputs can enter your software: parameters or arguments, cookies, anything read from the network, environment variables, reverse DNS lookups, query results, request headers, URL components, e-mail, files, filenames, databases, and any external systems that provide…
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-120Buffer Copy without Checking Size of Input ('Classic Buffer Overflow') (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #11
The product copies an input buffer to an output buffer without verifying that the size of the input buffer is less than the size of the output buffer.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Operation · Build and Compilation · Environment Hardening
Use automatic buffer overflow detection mechanisms that are offered by certain compilers or compiler extensions. Examples include: the Microsoft Visual Studio /GS flag, Fedora/Red Hat FORTIFY_SOURCE GCC flag, StackGuard, and ProPolice, which provide various mechanisms including canary-based detection and range/index…
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-416Use After Free (opens in a new tab)
Variant weaknessLikelihood of exploit: HighCWE Top 25 (2025): #7
The product reuses or references memory after it has been freed. At some point afterward, the memory may be allocated again and saved in another pointer, while the original pointer references a location somewhere within the new allocation. Any operations using the original pointer are no longer valid because the memory "belongs" to the code that operates on the new pointer.
Architecture and Design · Language Selection
Choose a language that provides automatic memory management.
Implementation · Attack Surface Reduction
When freeing pointers, be sure to set them to NULL once they are freed. However, the utilization of multiple or complex data structures may lower the usefulness of this strategy.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- GCVE source
- db.gcve.eu
- Csaf Category
- csaf_security_advisory
- Csaf Version
- 2.0
- Publisher
- Red Hat Product Security
- Advisory ID
- RHSA-2025:8194
- CVE Count
- 8
- Additional Cves
- CVE-2024-54467, CVE-2024-54551, CVE-2025-24189, CVE-2025-24208, CVE-2025-24209, CVE-2025-24216, CVE-2025-30427
References
Community reviews
Related threats
- CVE-2025-30427: Apple Safari · Use After FreeMediumVulnerability
- CVE-2025-24216: Processing maliciously crafted web content may lead to an unexpected Safari crashMediumVulnerability
- CVE-2025-24209: Apple Safari · Buffer OverflowHighVulnerability
- CVE-2025-24208: Apple Safari · Cross-site ScriptingMediumVulnerability
- CVE-2024-54551: Apple Safari · Processing web content may lead to a denial-of-serviceHighVulnerability