CVE-2025-43213VulnerabilityPublished 29 Apr 2026Updated 15 Jul 2026

Red Hat Security Advisory: webkit2gtk3 security update

Affects Red Hat webkit2gtk3Source GCVE Database

Compare

Mentioned vulnerabilities

Authoritative record:CVE-2025-43213· Medium 6.5

Not known to be exploited · CVSS 6.5 Medium.

Data as of 29 Oct 2026, 19:04 UTC

CVSS 3.1 base score

6.5Medium

How severe the flaw is on the 0–10 CVSS scale.

EPSS: 0.7% chance of exploitation in 30 days – higher than 54% of CVEsExploit Prediction Scoring System: the likelihood attackers will use this flaw soon.

CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H

Attack Vector: Network
Attack Complexity: Low
Privileges Required: None
User Interaction: Required
Scope: Unchanged
Confidentiality: None
Integrity: None
Availability: High

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable component is bound to the network stack and the set of possible attackers extends beyond the other options listed, up to and including the entire Internet. Such a vulnerability is often termed 'remotely exploitable' and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: Low: Specialized access conditions or extenuating circumstances do not exist. An attacker can expect repeatable success against the vulnerable component.
Privileges Required: None: The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files to carry out an attack.
User Interaction: Required: Successful exploitation of this vulnerability requires a user to take some action before the vulnerability can be exploited.
Scope: Unchanged: An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
Confidentiality: None: There is no loss of confidentiality within the impacted component.
Integrity: None: There is no loss of integrity within the impacted component.
Availability: High: There is total loss of availability, resulting in the attacker being able to fully deny access to resources in the impacted component; this loss is either sustained (while the attacker continues to deliver the attack) or persistent (the condition persists even after the attack has completed). Alternatively, the attacker has the ability to deny some availability, but the loss of availability presents a direct, serious consequence to the impacted component (e.g., the attacker cannot disrupt existing connections, but can prevent new connections; the attacker can repeatedly exploit a vulnerability that, in each instance of a successful attack, leaks a only small amount of memory, but after repeated exploitation causes a service to become completely unavailable).

Definitions: FIRST CVSS v3.1 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 29 Jul 2025
Detectable: no evidence on record.
No public nuclei template indexed
Weaponized: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 29 Oct 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponized: A Metasploit exploit module or Exploit-DB entry exists (Metasploit scanner modules do not count), or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

AI-suggested

Red Hat has released updated webkit2gtk3 packages for Red Hat Enterprise Linux 8.8 variants to address these vulnerabilities. Users and administrators should apply these official updates promptly following Red Hat's guidance at https://access.redhat.com/articles/11258 to remediate the security issues. No alternative mitigations or workarounds are specified in the advisory. Patch status is confirmed as fixed in the updated packages referenced in RHSA-2026:11814.

Description

Multiple security vulnerabilities have been identified in webkit2gtk3, the GTK port of the WebKit web rendering engine, affecting Red Hat Enterprise Linux 8.8 variants. These vulnerabilities include issues that may cause unexpected process crashes, denial-of-service, information disclosure, bypass of security policies such as Same Origin Policy and Content Security Policy, user tracking through Safari web extensions, fingerprinting, and cross-site scripting attacks. The vulnerabilities arise from processing maliciously crafted web content. Red Hat has issued an important security advisory with updates to address these issues.

Impact

The vulnerabilities can lead to denial-of-service conditions through process crashes, potential information disclosure of internal application states, bypass of critical web security policies such as Same Origin Policy and Content Security Policy, user tracking and fingerprinting, and cross-site scripting attacks. These impacts could allow remote attackers or malicious websites to disrupt application availability, compromise user privacy, and execute unauthorized scripts, thereby undermining the security of applications relying on webkit2gtk3 for web content rendering.

CWE-120Buffer Copy without Checking Size of Input (Classic Buffer Overflow) (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #11
The product copies an input buffer to an output buffer without verifying that the size of the input buffer is less than the size of the output buffer.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Operation · Build and Compilation · Environment Hardening
Use automatic buffer overflow detection mechanisms that are offered by certain compilers or compiler extensions. Examples include: the Microsoft Visual Studio /GS flag, Fedora/Red Hat FORTIFY_SOURCE GCC flag, StackGuard, and ProPolice, which provide various mechanisms including canary-based detection and range/index…
OWASP Cheat Sheets
Docker Security (opens in a new tab)
XML Security (opens in a new tab)
OWASP ASVS 4.0.3
V5.4.1 (opens in a new tab)
V14.1.2 (opens in a new tab)
V13.3.1 (opens in a new tab)
Attack patterns
Buffer Overflow via Environment Variables (opens in a new tab)
Overflow Buffers (opens in a new tab)
Client-side Injection-induced Buffer Overflow (opens in a new tab)
Filter Failure through Buffer Overflow (opens in a new tab)
MIME Conversion (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-416Use After Free (opens in a new tab)
Variant weaknessLikelihood of exploit: HighCWE Top 25 (2025): #7
The product reuses or references memory after it has been freed. At some point afterward, the memory may be allocated again and saved in another pointer, while the original pointer references a location somewhere within the new allocation. Any operations using the original pointer are no longer valid because the memory "belongs" to the code that operates on the new pointer.
Architecture and Design · Language Selection
Choose a language that provides automatic memory management.
Implementation · Attack Surface Reduction
When freeing pointers, be sure to set them to NULL once they are freed. However, the utilization of multiple or complex data structures may lower the usefulness of this strategy.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-909Missing Initialization of Resource (opens in a new tab)
Class weaknessLikelihood of exploit: Medium
The product does not initialize a critical resource.
Implementation
Explicitly initialize the resource before use. If this is performed through an API function or standard procedure, follow all specified steps.
Implementation
Pay close attention to complex conditionals that affect initialization, since some branches might not perform the initialization.
Implementation
Avoid race conditions (CWE-362) during initialization routines.
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-346Origin Validation Error (opens in a new tab)
Class weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
The product does not properly verify that the source of data or communication is valid.
OWASP Cheat Sheets
OWASP Authentication (opens in a new tab)
OWASP ASVS 4.0.3
V14.5.2 (opens in a new tab)
V14.5.3 (opens in a new tab)
V1.4.4 (opens in a new tab)
Attack patterns
JSON Hijacking (aka JavaScript Hijacking) (opens in a new tab)
Cache Poisoning (opens in a new tab)
DNS Cache Poisoning (opens in a new tab)
Exploit Script-Based APIs (opens in a new tab)
Application API Message Manipulation via Man-in-the-Middle (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-693Protection Mechanism Failure (opens in a new tab)
Pillar weaknessOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The product does not use or incorrectly uses a protection mechanism that provides sufficient defense against directed attacks against the product.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
OWASP Cheat Sheets
Secure Design Principles (opens in a new tab)
Attack patterns
Accessing Functionality Not Properly Constrained by ACLs (opens in a new tab)
Cross Site Tracing (opens in a new tab)
Directory Indexing (opens in a new tab)
Using Malicious Files (opens in a new tab)
Encryption Brute Forcing (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-201Insertion of Sensitive Information Into Sent Data (opens in a new tab)
Base weaknessOWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The code transmits data to another actor, but a portion of the data includes sensitive information that should not be accessible to that actor.
Requirements
Specify which data in the software should be regarded as sensitive. Consider which types of users should have access to which types of data.
Implementation
Ensure that any possibly sensitive data specified in the requirements is verified with designers to ensure that it is either a calculated risk or mitigated elsewhere.
System Configuration
Setup default error messages so that unexpected errors do not disclose sensitive information.
OWASP Cheat Sheets
Error Handling (opens in a new tab)
Logging (opens in a new tab)
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V8.3.4 (opens in a new tab)
V14.3.3 (opens in a new tab)
V7.3.3 (opens in a new tab)
Attack patterns
Choosing Message Identifier (opens in a new tab)
Exploiting Incorrectly Configured SSL/TLS (opens in a new tab)
WiFi MAC Address Tracking (opens in a new tab)
WiFi SSID Tracking (opens in a new tab)
Cellular Broadcast Message Request (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-497Exposure of Sensitive System Information to an Unauthorized Control Sphere (opens in a new tab)
Base weaknessOWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product does not properly prevent sensitive system-level information from being accessed by unauthorized actors who do not have the same level of access to the underlying system as the product does.
Architecture and Design · Implementation
Production applications should never use methods that generate internal details such as stack traces and error messages unless that information is directly committed to a log that is not viewable by the end user.
OWASP Cheat Sheets
Error Handling (opens in a new tab)
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V14.3.2 (opens in a new tab)
V8.3.4 (opens in a new tab)
V14.3.3 (opens in a new tab)
Attack patterns
Web Application Fingerprinting (opens in a new tab)
System Location Discovery (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-79Improper Neutralization of Input During Web Page Generation (Cross-site Scripting) (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #1OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product does not neutralize or incorrectly neutralizes user-controllable input before it is placed in output that is used as a web page that is served to other users.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Implementation · Architecture and Design
Understand the context in which your data will be used and the encoding that will be expected. This is especially important when transmitting data between different components, or when generating outputs that can contain multiple encodings at the same time, such as web pages or multi-part mail messages.
Architecture and Design · Implementation · Attack Surface Reduction
Understand all the potential areas where untrusted inputs can enter your software: parameters or arguments, cookies, anything read from the network, environment variables, reverse DNS lookups, query results, request headers, URL components, e-mail, files, filenames, databases, and any external systems that provide…
OWASP Cheat Sheets
Cross Site Scripting Prevention (opens in a new tab)
DOM based XSS Prevention (opens in a new tab)
Injection Prevention (opens in a new tab)
Abuse Case (opens in a new tab)
Deserialization (opens in a new tab)
OWASP ASVS 4.0.3
V5.3.3 (opens in a new tab)
V1.5.1 (opens in a new tab)
Attack patterns
XSS Using MIME Type Mismatch (opens in a new tab)
DOM-Based XSS (opens in a new tab)
Reflected XSS (opens in a new tab)
Stored XSS (opens in a new tab)
Cross-Site Scripting (XSS) (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

GCVE source: db.gcve.eu
Csaf Category: csaf_security_advisory
Csaf Version: 2.0
Publisher: Red Hat Product Security
Advisory ID: RHSA-2026:11814
CVE Count: 18
Additional Cves: CVE-2025-43214, CVE-2025-43457, CVE-2025-43511, CVE-2025-46299, CVE-2026-20608, CVE-2026-20635, CVE-2026-20636, CVE-2026-20643, CVE-2026-20644, CVE-2026-20652, CVE-2026-20664, CVE-2026-20665, CVE-2026-20676, CVE-2026-20691, CVE-2026-28857, CVE-2026-28859, CVE-2026-28871

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Description

AI analysisMachine-generated, updated 15 Jul 2026, 14:41 UTC

WeaknessesCWE-120, CWE-416, CWE-909 +5

Technical details

References

Community reviews

Related threats