RemoteConnect and SCADAPack™ x70 Utilities
We strongly recommend the following industry cybersecurity best practices. https://www.se.com/us/en/download/document/7EN52-0390/ * Locate control and safety system networks and remote devices behind firewalls and isolate them from the business network. * Install physical controls so no unauthorized personnel can access your industrial control and safety systems, components, peripheral equipment, and networks. * Place all controllers in locked cabinets and never leave them in the “Program” mode. * Never connect programming software to any network other than the network intended for that device. * Scan all methods of mobile data exchange with the isolated network such as CDs, USB drives, etc. before use in the terminals or any node connected to these networks. * Never allow mobile devices that have connected to any other network besides the intended network to connect to the safety or control networks without proper sanitation. * Minimize network exposure for all control system devices and systems and ensure that they are not accessible from the Internet. * When remote access is required, use secure methods, such as Virtual Private Networks (VPNs). Recognize that VPNs may have vulnerabilities and should be updated to the most current version available. Also, understand that VPNs are only as secure as the connected devices. For more information refer to the Schneider Electric Recommended Cybersecurity Best Practices document.
AI Analysis
Technical Summary
This vulnerability (CVE-2024-12703) impacts Schneider Electric RemoteConnect and SCADAPack™ x70 Utilities versions before 3.4.2 and is associated with CWE-502 (deserialization of untrusted data). The advisory emphasizes industry best practices such as isolating control and safety networks behind firewalls, restricting physical access, avoiding unauthorized network connections, sanitizing removable media, minimizing network exposure, and using secure remote access like VPNs. No direct patch or remediation details are provided in the source data.
Potential Impact
The vulnerability potentially allows exploitation via unsafe deserialization, which could lead to unauthorized code execution or system compromise in industrial control environments. However, no known exploits are reported in the wild. The impact is significant given the critical nature of control and safety systems but depends on the attacker's ability to access vulnerable systems.
Mitigation Recommendations
No official patch or fix is confirmed from the provided data. Users should follow Schneider Electric's recommended cybersecurity best practices: isolate control networks behind firewalls, enforce physical security controls, avoid connecting programming software to unintended networks, sanitize all removable media before use, minimize network exposure, and use secure remote access methods such as updated VPNs. Monitor Schneider Electric advisories for any future patches or updates.
RemoteConnect and SCADAPack™ x70 Utilities
Description
We strongly recommend the following industry cybersecurity best practices. https://www.se.com/us/en/download/document/7EN52-0390/ * Locate control and safety system networks and remote devices behind firewalls and isolate them from the business network. * Install physical controls so no unauthorized personnel can access your industrial control and safety systems, components, peripheral equipment, and networks. * Place all controllers in locked cabinets and never leave them in the “Program” mode. * Never connect programming software to any network other than the network intended for that device. * Scan all methods of mobile data exchange with the isolated network such as CDs, USB drives, etc. before use in the terminals or any node connected to these networks. * Never allow mobile devices that have connected to any other network besides the intended network to connect to the safety or control networks without proper sanitation. * Minimize network exposure for all control system devices and systems and ensure that they are not accessible from the Internet. * When remote access is required, use secure methods, such as Virtual Private Networks (VPNs). Recognize that VPNs may have vulnerabilities and should be updated to the most current version available. Also, understand that VPNs are only as secure as the connected devices. For more information refer to the Schneider Electric Recommended Cybersecurity Best Practices document.
Affected software
Weaknesses
AI-Powered Analysis
Machine-generated threat intelligence
Technical Analysis
This vulnerability (CVE-2024-12703) impacts Schneider Electric RemoteConnect and SCADAPack™ x70 Utilities versions before 3.4.2 and is associated with CWE-502 (deserialization of untrusted data). The advisory emphasizes industry best practices such as isolating control and safety networks behind firewalls, restricting physical access, avoiding unauthorized network connections, sanitizing removable media, minimizing network exposure, and using secure remote access like VPNs. No direct patch or remediation details are provided in the source data.
Potential Impact
The vulnerability potentially allows exploitation via unsafe deserialization, which could lead to unauthorized code execution or system compromise in industrial control environments. However, no known exploits are reported in the wild. The impact is significant given the critical nature of control and safety systems but depends on the attacker's ability to access vulnerable systems.
Mitigation Recommendations
No official patch or fix is confirmed from the provided data. Users should follow Schneider Electric's recommended cybersecurity best practices: isolate control networks behind firewalls, enforce physical security controls, avoid connecting programming software to unintended networks, sanitize all removable media before use, minimize network exposure, and use secure remote access methods such as updated VPNs. Monitor Schneider Electric advisories for any future patches or updates.
Technical Details
- Gcve Source
- db.gcve.eu
- Csaf Category
- csaf_security_advisory
- Csaf Version
- 2.0
- Publisher
- Schneider Electric CPCERT
- Advisory Id
- SEVD-2025-014-06
- Cve Count
- 1
- Additional Cves
- []
- Cvss Version
- null
Threat ID: 6a55ff4968715ace432efba5
Added to database: 07/14/2026, 09:20:09 UTC
Last enriched: 07/14/2026, 09:22:40 UTC
Last updated: 07/23/2026, 08:51:58 UTC
Views: 8
Community Reviews
0 reviewsCrowdsource mitigation strategies, share intel context, and vote on the most helpful responses. Sign in to add your voice and help keep defenders ahead.
Want to contribute mitigation steps or threat intel context? Sign in or create an account to join the community discussion.
Actions
Updates to AI analysis require Pro Console access. Upgrade inside Console → Billing.
Need more coverage?
Upgrade to Pro Console for AI refresh and higher limits.
For incident response and remediation, OffSeq services can help resolve threats faster.
Latest Threats
Check if your credentials are on the dark web
Instant breach scanning across billions of leaked records. Free tier available.