Meshtastic-Android is an Android application for the mesh radio software Meshtastic. Prior to version 2.5.21, an attacker is able to send an unencrypted direct message to a victim impersonating any other node of the mesh. This message will be displayed in the same chat that the victim normally communicates with the other node and it will appear as using PKC, while it is not. This means that the victim will be provided with a false sense of security due to the green padlock displayed when using PKC and they'll read the attacker's message as legitimate. Version 2.5.21 contains a patch for the issue. It is suggested to implement a stricter control on whether a message has been received using PKC or using the shared Meshtastic channel key. Moreover, instead of showing no green padlock icon in the chat with no PKC, consider using an explicit indicator like, for example, the yellow half-open padlock displayed when in HAM mode. This remediation, however, applies to the client applications rather than the Meshtastic firmware.
A vulnerability in the interprocess communication (IPC) channel of Cisco Secure Client for Windows could allow an authenticated, local attacker to perform a DLL hijacking attack on an affected device if the Secure Firewall Posture Engine, formerly HostScan, is installed on Cisco Secure Client.
This vulnerability is due to insufficient validation of resources that are loaded by the application at run time. An attacker could exploit this vulnerability by sending a crafted IPC message to a specific Cisco Secure Client process. A successful exploit could allow the attacker to execute arbitrary code on the affected machine with SYSTEM privileges. To exploit this vulnerability, the attacker must have valid user credentials on the Windows system.
In the Linux kernel, the following vulnerability has been resolved: udp: Deal with race between UDP socket address change and rehash If a UDP socket changes its local address while it's receiving datagrams, as a result of connect(), there is a period during which a lookup operation might fail to find it, after the address is changed but before the secondary hash (port and address) and the four-tuple hash (local and remote ports and addresses) are updated. Secondary hash chains were introduced by commit 30fff9231fad ("udp: bind() optimisation") and, as a result, a rehash operation became needed to make a bound socket reachable again after a connect(). This operation was introduced by commit 719f835853a9 ("udp: add rehash on connect()") which isn't however a complete fix: the socket will be found once the rehashing completes, but not while it's pending. This is noticeable with a socat(1) server in UDP4-LISTEN mode, and a client sending datagrams to it. After the server receives the first datagram (cf. _xioopen_ipdgram_listen()), it issues a connect() to the address of the sender, in order to set up a directed flow. Now, if the client, running on a different CPU thread, happens to send a (subsequent) datagram while the server's socket changes its address, but is not rehashed yet, this will result in a failed lookup and a port unreachable error delivered to the client, as apparent from the following reproducer: LEN=$(($(cat /proc/sys/net/core/wmem_default) / 4)) dd if=/dev/urandom bs=1 count=${LEN} of=tmp.in while :; do taskset -c 1 socat UDP4-LISTEN:1337,null-eof OPEN:tmp.out,create,trunc & sleep 0.1 || sleep 1 taskset -c 2 socat OPEN:tmp.in UDP4:localhost:1337,shut-null wait done where the client will eventually get ECONNREFUSED on a write() (typically the second or third one of a given iteration): 2024/11/13 21:28:23 socat[46901] E write(6, 0x556db2e3c000, 8192): Connection refused This issue was first observed as a seldom failure in Podman's tests checking UDP functionality while using pasta(1) to connect the container's network namespace, which leads us to a reproducer with the lookup error resulting in an ICMP packet on a tap device: LOCAL_ADDR="$(ip -j -4 addr show|jq -rM '.[] | .addr_info[0] | select(.scope == "global").local')" while :; do ./pasta --config-net -p pasta.pcap -u 1337 socat UDP4-LISTEN:1337,null-eof OPEN:tmp.out,create,trunc & sleep 0.2 || sleep 1 socat OPEN:tmp.in UDP4:${LOCAL_ADDR}:1337,shut-null wait cmp tmp.in tmp.out done Once this fails: tmp.in tmp.out differ: char 8193, line 29 we can finally have a look at what's going on: $ tshark -r pasta.pcap 1 0.000000 :: ? ff02::16 ICMPv6 110 Multicast Listener Report Message v2 2 0.168690 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192 3 0.168767 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192 4 0.168806 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192 5 0.168827 c6:47:05:8d:dc:04 ? Broadcast ARP 42 Who has 88.198.0.161? Tell 88.198.0.164 6 0.168851 9a:55:9a:55:9a:55 ? c6:47:05:8d:dc:04 ARP 42 88.198.0.161 is at 9a:55:9a:55:9a:55 7 0.168875 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192 8 0.168896 88.198.0.164 ? 88.198.0.161 ICMP 590 Destination unreachable (Port unreachable) 9 0.168926 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192 10 0.168959 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192 11 0.168989 88.198.0.161 ? 88.198.0.164 UDP 4138 60260 ? 1337 Len=4096 12 0.169010 88.198.0.161 ? 88.198.0.164 UDP 42 60260 ? 1337 Len=0 On the third datagram received, the network namespace of the container initiates an ARP lookup to deliver the ICMP message. In another variant of this reproducer, starting the client with: strace -f pasta --config-net -u 1337 socat UDP4-LISTEN:1337,null-eof OPEN:tmp.out,create,tru ---truncated---
Multiple Buffer overflows in the MMS Client in MZ Automation LibIEC61850 before commit 1f52be9ddeae00e69cd43e4cac3cb4f0c880c4f0 allow a malicious server to cause a stack-based buffer overflow via the MMS IdentifyResponse message.
Multiple Buffer overflows in the MMS Client in MZ Automation LibIEC61850 before commit ac925fae8e281ac6defcd630e9dd756264e9c5bc allow a malicious server to cause a stack-based buffer overflow via the MMS FileDirResponse message.
NULL pointer dereference in the MMS Client in MZ Automation LibIEC1850 before commit 7afa40390b26ad1f4cf93deaa0052fe7e357ef33 allows a malicious server to Cause a Denial-of-Service via the MMS InitiationResponse message.
An attacker with local access the to medical office computer can
escalate his Windows user privileges to "NT AUTHORITY\SYSTEM" by
exploiting a command injection vulnerability in the Elefant Update
Service. The command injection can be exploited by communicating with
the Elefant Update Service which is running as "SYSTEM" via Windows
Named Pipes.The Elefant Software Updater (ESU) consists of two components. An ESU
service which runs as "NT AUTHORITY\SYSTEM" and an ESU tray client
which communicates with the service to update or repair the installation
and is running with user permissions. The communication is implemented
using named pipes. A crafted message of type
"MessageType.SupportServiceInfos" can be sent to the local ESU service
to inject commands, which are then executed as "NT AUTHORITY\SYSTEM".
An update for Red Hat Build of Apache Camel 4.4 for Quarkus 3.8 update is now available (RHBQ 3.8.6.GA).
The purpose of this text-only errata is to inform you about the enhancements that improve your developer experience and ensure the security and stability of your products:
* CVE-2024-45294 ca.uhn.hapi.fhir/org.hl7.fhir.utilities: XXE vulnerability in XSLT transforms in
* CVE-2024-45294 ca.uhn.hapi.fhir/org.hl7.fhir.r5: XXE vulnerability in XSLT transforms in
* CVE-2024-45294 ca.uhn.hapi.fhir/org.hl7.fhir.r4: XXE vulnerability in XSLT transforms in
* CVE-2024-45294 ca.uhn.hapi.fhir/org.hl7.fhir.dstu3: XXE vulnerability in XSLT transforms in
* CVE-2024-45294 ca.uhn.hapi.fhir/org.hl7.fhir.dstu2016may: XXE vulnerability in XSLT transforms in
* CVE-2024-8391 io.vertx/vertx-grpc-server: Vertx gRPC server does not limit the maximum message size
* CVE-2024-8391 io.vertx/vertx-grpc-client: Vertx gRPC server does not limit the maximum message size
* CVE-2024-32007 org.apache.cxf/cxf-rt-rs-security-jose: apache: cxf: org.apache.cxf:cxf-rt-rs-security-jose: Denial of Service vulnerability in JOSE
* CVE-2024-41172 org.apache.cxf/cxf-rt-transports-http: unrestricted memory consumption in CXF HTTP clients
* CVE-2024-35255 com.azure/azure-identity: Azure Identity Libraries Elevation of Privilege Vulnerability in github.com/Azure/azure-sdk-for-go/sdk/azidentity
Red Hat has released an update for its build of Quarkus 3.8.6 that addresses multiple security issues including a remote memory denial-of-service vulnerability in the undertow component (CVE-2024-3653) and a message size limitation flaw in the Vertx gRPC client and server components (CVE-2024-8391). These vulnerabilities could allow attackers to cause resource exhaustion or denial of service. The update also includes various bug fixes and enhancements.
An issue in GL-iNet products AR750/AR750S/AR300M/AR300M16/MT300N-V2/B1300/MT1300/SFT1200/X750 v4.3.11, MT3000/MT2500/AXT1800/AX1800/A1300/X300B v4.5.16, XE300 v4.3.16, E750 v4.3.12, AP1300/S1300 v4.3.13, XE3000/X3000 v4, and B2200/MV1000/MV1000W/USB150/N300/SF1200 v3.216 allows attackers to intercept communications via a man-in-the-middle attack when DDNS clients are reporting data to the server.
Multiple security vulnerabilities affecting the java-21-openjdk packages provided by Red Hat for OpenJDK 21 have been identified and fixed. These include a long exception message causing a crash, an integer overflow in the C1 compiler address generation, and an improper reverse DNS lookup in the HTTP/2 client. The security impact is rated as moderate by Red Hat. Updates addressing these issues are available for Red Hat Enterprise Linux versions 8 and 9 and related distributions and should be applied to affected systems.
Exposure of sensitive information in exceptions in ClichHouse's clickhouse-r2dbc, com.clickhouse:clickhouse-jdbc, and com.clickhouse:clickhouse-client versions less than 0.4.6 allows unauthorized users to gain access to client certificate passwords via client exception logs. This occurs when 'sslkey' is specified and an exception, such as a ClickHouseException or SQLException, is thrown during database operations; the certificate password is then included in the logged exception message.
FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to version 1.10.11, when handling DTLS-SRTP for media setup, FreeSWITCH is susceptible to Denial of Service due to a race condition in the hello handshake phase of the DTLS protocol. This attack can be done continuously, thus denying new DTLS-SRTP encrypted calls during the attack. If an attacker manages to send a ClientHello DTLS message with an invalid CipherSuite (such as `TLS_NULL_WITH_NULL_NULL`) to the port on the FreeSWITCH server that is expecting packets from the caller, a DTLS error is generated. This results in the media session being torn down, which is followed by teardown at signaling (SIP) level too. Abuse of this vulnerability may lead to a massive Denial of Service on vulnerable FreeSWITCH servers for calls that rely on DTLS-SRTP. To address this vulnerability, upgrade FreeSWITCH to 1.10.11 which includes the security fix. The solution implemented is to drop all packets from addresses that have not been validated by an ICE check.
An issue was discovered in BusyBox through 1.30.0. An out of bounds read in udhcp components (consumed by the DHCP client, server, and/or relay) might allow a remote attacker to leak sensitive information from the stack by sending a crafted DHCP message. This is related to assurance of a 4-byte length when decoding DHCP_SUBNET. NOTE: this issue exists because of an incomplete fix for CVE-2018-20679.
An issue was discovered in BusyBox before 1.30.0. An out of bounds read in udhcp components (consumed by the DHCP server, client, and relay) allows a remote attacker to leak sensitive information from the stack by sending a crafted DHCP message. This is related to verification in udhcp_get_option() in networking/udhcp/common.c that 4-byte options are indeed 4 bytes.