RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, The AMQP 0-9-1 shovel calls amqp_uri:remove_credentials before storing its connection URI, but the AMQP 1.0 shovel stores the raw URI including the password. The stored URI is visible via GET /api/shovels and via rabbitmqctl shovel_status. Preconditions include The Shovel plugin must be in use with AMQP 1.0 shovels configured using URI-embedded credentials. Reading the exposed status requires the monitoring tag.. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0.
RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, The trust-store plugin installs a verify_fun that overrides {bad_cert, unknown_ca} / {bad_cert, selfsigned_peer} when the presented cert "matches" a whitelisted one. The match key is extract_issuer_id/1 → public_key:pkix_issuer_id/2 → {IssuerName, SerialNumber} , both fields are taken verbatim from the presented certificate body and contain no public-key, SKI, fingerprint or signature material. is_whitelisted/1 is a pure ets:member lookup; the stored full DER is used only for list/0 display and is never compared against the presented cert. cacerts is [], so the whitelisted cert is never used as a trust anchor for path validation either. TLS client-authentication bypass: an attacker who knows the issuer DN + serial of any whitelisted certificate can connect with a forged self-signed cert. Preconditions include rabbitmq_trust_store plugin enabled and used as the TLS verify_fun Attacker knows or can guess the {Issuer, Serial} of at least one whitelisted cert (non-secret; exposed via CLI/logs/any cert copy). This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0.
RabbitMQ is a messaging and streaming broker. Prior to versions 4.0.22, 4.1.11, 4.2.6, and 4.3.0, accept_content/2 at line 56 calls rabbit_stream_manager:create_super_stream/... directly after is_authorized (which only checks the management tag + vhost access via is_authorized_vhost). The stream-protocol equivalent (rabbit_stream_reader.erl create_super_stream handler) calls rabbit_stream_utils:check_super_stream_management_permitted/4 which enforces configure on the exchange and each partition queue. The HTTP handler omits this call entirely. A user with management tag and vhost access , but no configure permission on any resource , can create super-streams (an exchange + N partition stream queues + bindings) via the HTTP API. The native stream-protocol path enforces configure on each resource; the HTTP path does not, creating a privilege escalation from 'can view' to 'can create persistent cluster-wide resources.' Preconditions include rabbitmq_stream_management plugin enabled management tag + vhost access (no resource permissions needed). This issue is fixed in versions 4.0.22, 4.1.11, 4.2.6, and 4.3.0.
RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, match_value/3 passes the user-supplied ?name= regular expression to re:run with no match_limit option, and executes it once per resource in the result set. OTP's default 10M match_limit caps each call at roughly 100-200ms, but the regex runs once per resource in the result set. With a large set, for example 5000 queues at 150ms each, a single request consumes 12 or more minutes of CPU. Parallel requests saturate the schedulers. The use_regex=true option is a supported feature on list endpoints, so this path is reachable through normal API use. Preconditions include Any user with the management tag can exploit this.. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0.
RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, The cowboy WebSocket options at line 117 set compress => true, enabling RFC 7692 permessage-deflate negotiation. The handler does not set max_frame_size, so cowboy's default of infinity applies. cowlib's cow_ws:parse_payload/9 calls zlib:inflate/2 on the compressed payload with no output-size limit. An attacker can negotiate permessage-deflate during the WebSocket upgrade and send a frame containing a zlib bomb (e.g. 50 KB → 5 GB). Decompression occurs in the connection process before websocket_handle/2 ever sees the MQTT bytes. An unauthenticated attacker can crash a RabbitMQ node running the Web-MQTT plugin by sending a single highly-compressed WebSocket frame (a few KB on the wire) that inflates to gigabytes in memory. The cowboy WebSocket handler decompresses the entire frame before the MQTT CONNECT packet is processed, so no credentials are required. Preconditions include rabbitmq_web_mqtt plugin enabled (not default, but common for browser clients) Network reachability to port 15675/15676 No authentication required. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0.
RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, Neither the Web-MQTT handler (deps/rabbitmq_web_mqtt/src/rabbit_web_mqtt_handler.erl:104) nor the Web-STOMP handler (deps/rabbitmq_web_stomp/src/rabbit_web_stomp_handler.erl:102) validates the Origin header on the WebSocket upgrade. Under ssl_cert_login=true, the browser presents the client certificate automatically, so an attacker's JavaScript running in the victim's browser can authenticate as the victim. Preconditions include The non-default configuration use_http_auth=true (Web-STOMP) or ssl_cert_login=true (both plugins) must be enabled. The issue is harmless under the default in-band CONNECT credential configuration.. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0.
RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1, is_authorized/2 for the /federation-links/.../restart route uses is_authorized_monitor (accepts the monitoring tag), while allowed_methods permits DELETE and delete_resource/2 triggers rabbit_federation_link_sup:restart. There is no per-method elevation check and no comment marking it intentional. A read-only monitoring user can restart any federation link , a state-changing operation that disrupts message flow. Preconditions include rabbitmq_federation + rabbitmq_federation_management plugins enabled Attacker has credentials with the monitoring tag. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1.
RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, add_binding/3 parses the routing key as an integer weight N and computes ring positions with lists:seq(NextN0, NextN0 + N - 1). validate_binding/2 only checks N >= 1 , no upper bound. The resulting list is stored in the exchange's Khepri record, replicated cluster-wide, and reloaded on restart. A user with write permission on a consistent-hash exchange and read on a queue can create a binding whose routing key (the hash-ring weight) is an arbitrarily large integer. The broker allocates a list of that many integers via lists:seq/2 and persists it to Khepri across all cluster nodes , a single binding with weight 100000000 allocates ~800 MB on every node and survives restarts. Preconditions include rabbitmq_consistent_hash_exchange plugin enabled write permission on a consistent-hash exchange + read on a queue (standard binding perms). This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0.
RabbitMQ is a messaging and streaming broker. Prior to versions 4.2.7 and 4.3.1, The runtime-parameters lookup path coerces the URL :component segment to an atom with rabbit_data_coercion:to_atom/1 in lookup_component/1 (deps/rabbit/src/rabbit_runtime_parameters.erl), creating a new atom for any previously unseen value. A safe helper, rabbit_registry:binary_to_type/1, which uses binary_to_existing_atom with a catch, already exists but is not used at this call site. lookup_component/1 calls rabbit_data_coercion:to_atom(Component) on the :component segment of the request URL, converting an attacker-supplied string into a new atom. Because the Erlang atom table is bounded and atoms are never garbage collected, an authorized policymaker issuing roughly one million requests with distinct component values can exhaust the atom table and crash the node, resulting in a denial of service. Preconditions include Exploitation requires policymaker privileges and roughly one million requests.. This issue is fixed in versions 4.2.7 and 4.3.1.
RabbitMQ is a messaging and streaming broker. Prior to versions 4.3.0, 4.2.6, 4.1.11, 4.0.20, and 3.13.15, The content-header BodySize (a uint64) was stored without validation against max_message_size. The size check ran only when assembly completed. By declaring body_size = 2^63-1 and then streaming fragments, a client ensured that check_msg_size never fired, so the accumulated body size went unbounded. A reader process accumulates memory until the memory alarm fires, degrading all publishers cluster-wide, or until the node runs out of memory. The memory alarm provides only partial mitigation, since it is reactive rather than preventive. AMQP 0-9-1 is the most widely used protocol, and any publisher can trigger this condition. Preconditions include Any authenticated AMQP 0-9-1 client with publish permission can exploit this.. This issue is fixed in versions 4.3.0, 4.2.6, 4.1.11, 4.0.20, and 3.13.15.
RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, ?LOG_DEBUG("shutting down Shovel '~ts', ... Shovel state: ~tp", [Name, State]) formats the entire state map. The 'uris' field holds plaintext URIs after credentials_obfuscation:decrypt (called in rabbit_shovel_util:deobfuscated_uris/2). No format_status/1,2 callback exists in rabbit_shovel_worker to redact it. Triggered when an autodelete shovel (src-delete-after = N) completes. With DEBUG logging enabled, autodelete-shovel completion writes the full shovel state map , including decrypted amqp://user:password@host/ URIs , to the broker log file. Preconditions include Shovel plugin enabled with URI-embedded credentials DEBUG log level (non-default) Autodelete shovel configuration Attacker has log read access. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0.
RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, add_vhost/2 calls rabbit_data_coercion:atomize_keys/1 (the unsafe variant using binary_to_atom) on the vhost metadata map. The 20 MB management body limit fits ~1M+ short keys. Admin-only. An administrator importing a crafted definitions file can crash the node in a single request: a vhosts entry with ~1M unique metadata keys exhausts the atom table during import. Preconditions include administrator tag. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0.
RabbitMQ is a messaging and streaming broker. Prior to versions 4.1.11, 4.2.6, and 4.3.0, validate_partitions only checks that the requested partition count is at least 1, with no upper bound. A large count such as lists:seq(0, 500000000) allocates roughly 8GB. Preconditions include The rabbitmq_stream_management plugin must be enabled. The caller needs the management tag and access to the target vhost.. This issue is fixed in versions 4.1.11, 4.2.6, and 4.3.0.
RabbitMQ is a messaging and streaming broker. Prior to versions 4.2.7 and 4.3.1, pattern_to_regex maps % -> .*? and _ -> ., then compiles ^...$ with only [unicode]; re:run is called with only [{capture, none}] - no explicit match_limit. A pattern like %_%_..._%X becomes ^.*?..*?.....*?.X$ with overlapping lazy quantifiers. The whole-expression cap is ?MAX_EXPRESSION_LENGTH=4096 chars / ?MAX_TOKENS=200; a LIKE string literal is one token, so ~2000 %_ pairs fit. SQL filters are accepted unconditionally at rabbit_amqp_session.erl:3264 (no feature flag). Evaluated per-message at rabbit_stream_queue.erl:1439. OTP's default 10M match_limit caps each match at ~100-200 ms (not seconds), and the re NIF yields to the scheduler. An authenticated AMQP 1.0 consumer with read+write on a stream queue can cause ~100-200 ms of CPU per delivered message via a crafted LIKE filter, multiplied across thousands of messages and parallel sessions - a substantial backtracking-driven CPU amplification. Preconditions include AMQP 1.0 with stream queues in use Attacker can attach a receiver with a filter (read permission) and publish messages with long property values (write permission). This issue is fixed in versions 4.2.7 and 4.3.1.
RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1, get_chunk_selector/1 calls binary_to_atom on the raw client-supplied <<"chunk_selector">> property from post-auth subscribe and resolve_offset_spec frames, with no whitelist and no existing guard. An authenticated stream client with read access to any stream can crash the broker node. Preconditions include rabbitmq_stream plugin enabled Authenticated stream-protocol user with read access to at least one stream. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1.
RabbitMQ is a messaging and streaming broker. Prior to versions 4.2.7 and 4.3.1, The stream open handler calls only check_vhost_access; it omits the node/vhost/user connection-limit checks that rabbit_reader performs for AMQP. A developer %% FIXME comment at the cited line explicitly acknowledges the gap. No compensating enforcement exists in connection tracking or elsewhere in rabbitmq_stream. An authenticated tenant can fully bypass operator-configured per-user and per-vhost connection caps by connecting via port 5552 instead of 5672. Preconditions include rabbitmq_stream plugin enabled Authenticated stream-protocol credentials Operator relies on per-user/per-vhost connection limits for tenant isolation. This issue is fixed in versions 4.2.7 and 4.3.1.
RabbitMQ is a messaging and streaming broker. Prior to versions 4.1.13, 4.2.7, and 4.3.0, is_authorized/2 uses is_authorized_monitor for all methods. DELETE resets rabbit_core_metrics:reset_auth_attempt_metrics(). Impact is cosmetic (counters only, no log erasure), but inconsistent with rabbit_mgmt_wm_reset.erl which requires admin for the analogous operation. A monitoring-tagged user can reset the per-node authentication-attempt counters via DELETE /api/auth/attempts/:node, erasing evidence of brute-force activity. The sibling endpoint wm_reset requires administrator. Preconditions include Management plugin enabled monitoring tag. This issue is fixed in versions 4.1.13, 4.2.7, and 4.3.0.
RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, When no CA bundle is available, ssl_options/1 falls back to [{verify, verify_none}] with no warning. An attacker in a man-in-the-middle position can forge the JWKS response, which leads the broker to accept arbitrary JWTs. Preconditions include The OAuth2 plugin must be in use with no cacertfile configured and the OS CA bundle empty or unreadable (for example, in a minimal container), and the attacker must hold a network man-in-the-middle position.. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0.
RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, 4.3.0, When a binding is created on an x-jms-topic exchange, add_binding/3 reads the rjms_erlang_selector argument and passes it through erl_scan:string/1 then erl_parse:parse_term/1. erl_scan:string/1 interns every atom literal it tokenizes. validate_binding/2 is a no-op (-> ok.), there is no length cap, and the surrounding try/catch cannot reclaim atoms. The Java JMS client compiles selectors client-side, but the server does not enforce this , a raw AMQP client can send arbitrary selector strings. An authenticated low-privilege AMQP user confined to one vhost can crash the entire broker node (cross-tenant DoS) in <100 bind calls. Preconditions include rabbitmq_jms_topic_exchange plugin enabled (bundled; required for any JMS deployment) Authenticated AMQP user with read on an x-jms-topic exchange + write on a queue (or configure to declare both). This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, 4.3.0.
RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1, The trace consumer constructs the output path as filename:join(TraceDir, Name ++ ".log") where Name comes from PUT /api/traces/:vhost/:name. No safe_relative_path / traversal check is applied on the write side, while the read side (rabbit_tracing_files.erl) does call rabbit_misc:safe_relative_path/1 , proving the omission is an oversight, not design. The .log suffix is forced and the endpoint requires administrator. A user with the administrator tag can write a .log-suffixed file to an arbitrary filesystem path writable by the rabbitmq user via the tracing plugin's name parameter, e.g. /etc/cron.d/x.log (if writable) or overwrite existing .log files outside the trace directory. Preconditions include rabbitmq_tracing plugin enabled administrator tag Target path writable by rabbitmq OS user. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1.