VulnerabilityPublished 8 Apr 2024Updated 15 Aug 2024

CVE-2024-31805: TOTOLINK EX200 · Improper Access Control

Source CVE Database V5

Not known to be exploited · CVSS 6.5 Medium.

Data as of 26 Oct 2026, 17:16 UTC

CVSS 3.1 base score

6.5Medium

How severe the flaw is on the 0–10 CVSS scale.

EPSS: 0.5% chance of exploitation in 30 days – higher than 42% of CVEsExploit Prediction Scoring System: the likelihood attackers will use this flaw soon.

CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N

Attack Vector: Adjacent
Attack Complexity: Low
Privileges Required: None
User Interaction: None
Scope: Unchanged
Confidentiality: High
Integrity: None
Availability: None

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Adjacent: The vulnerable component is bound to the network stack, but the attack is limited at the protocol level to a logically adjacent topology. This can mean an attack must be launched from the same shared physical (e.g., Bluetooth or IEEE 802.11) or logical (e.g., local IP subnet) network, or from within a secure or otherwise limited administrative domain (e.g., MPLS, secure VPN to an administrative network zone).
Attack Complexity: Low: Specialized access conditions or extenuating circumstances do not exist. An attacker can expect repeatable success against the vulnerable component.
Privileges Required: None: The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files to carry out an attack.
User Interaction: None: The vulnerable system can be exploited without any interaction from any user.
Scope: Unchanged: An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
Confidentiality: High: There is total loss of confidentiality, resulting in all resources within the impacted component being divulged to the attacker. Alternatively, access to only some restricted information is obtained, but the disclosed information presents a direct, serious impact.
Integrity: None: There is no loss of integrity within the impacted component.
Availability: None: There is no impact to availability within the impacted component.

Definitions: FIRST CVSS v3.1 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 8 Apr 2024
Detectable: no evidence on record.
No public nuclei template indexed
Weaponised: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 26 Oct 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponised: Public exploit code exists in Metasploit or Exploit-DB, or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

AI-suggested

To mitigate CVE-2024-31805, organizations should immediately verify if their network uses TOTOLINK EX200 routers running the vulnerable firmware version 4.0.3c.7646_B20201211. If so, they should disable Telnet access entirely if it is not required, as Telnet is an outdated and insecure protocol. Network administrators should restrict access to router management interfaces to trusted IP addresses and consider segmenting management networks to limit exposure. Monitoring network traffic for unexpected Telnet activation attempts can help detect exploitation attempts. Since no official patches are currently available, organizations should contact TOTOLINK support for firmware updates or advisories. Applying network-level controls such as firewall rules to block Telnet ports (TCP 23) from untrusted sources is also recommended. Additionally, replacing Telnet with secure alternatives like SSH for remote management can reduce risk. Regularly auditing router configurations and firmware versions will help maintain security posture against similar vulnerabilities.

Description

TOTOLINK EX200 V4.0.3c.7646_B20201211 allows attackers to start the Telnet service without authorization via the telnet_enabled parameter in the setTelnetCfg function.

Impact

The primary impact of this vulnerability is unauthorized activation of the Telnet service on affected TOTOLINK EX200 routers, which can lead to significant confidentiality risks. Once Telnet is enabled, attackers can attempt to connect remotely and potentially intercept or manipulate network traffic, access device configuration, or launch further attacks within the network. This exposure can compromise sensitive information and network integrity. Since Telnet transmits data unencrypted, credentials and other sensitive data could be intercepted by attackers. The vulnerability does not affect integrity or availability directly but opens a pathway for further exploitation. Organizations relying on these routers, especially in environments with sensitive data or critical infrastructure, face increased risk of unauthorized access and data breaches. The lack of authentication requirement and no need for user interaction make this vulnerability easier to exploit, increasing the threat level in local or adjacent network environments.

CWE-284Improper Access Control (opens in a new tab)
Pillar weaknessCWE Top 25 (2025): #19OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product does not restrict or incorrectly restricts access to a resource from an unauthorized actor.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
Architecture and Design · Operation
Very carefully manage the setting, management, and handling of privileges. Explicitly manage trust zones in the software.
Architecture and Design · Separation of Privilege
Compartmentalize the system to have "safe" areas where trust boundaries can be unambiguously drawn. Do not allow sensitive data to go outside of the trust boundary and always be careful when interfacing with a compartment outside of the safe area.
OWASP Cheat Sheets
Docker Security (opens in a new tab)
Third Party Javascript Management (opens in a new tab)
Virtual Patching (opens in a new tab)
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V1.4.4 (opens in a new tab)
V1.4.5 (opens in a new tab)
V1.10.1 (opens in a new tab)
Attack patterns
Embedding Scripts within Scripts (opens in a new tab)
Modification of Windows Service Configuration (opens in a new tab)
Malicious Root Certificate (opens in a new tab)
Intent Spoof (opens in a new tab)
WebView Exposure (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

References

github.com/4hsien/CVE-vulns/blob/main/TOTOLINK/EX200/CI_5_setTelnetCfg/CI.md (opens in a new tab)

Community reviews

Loading reviews…

Exploitation evidence

What to do

Description

AI analysisMachine-generated, updated 26 Feb 2026, 16:27 UTC

WeaknessesCWE-284

Technical details

References

Community reviews

Related threats