VulnerabilityPublished 1 Nov 2024Updated 5 Nov 2024

CVE-2024-51431: LB-LINK BL-WR · Use of Hard-coded Credentials

Source CVE Database V5

Not known to be exploited · CVSS 8.1 High.

Data as of 26 Oct 2026, 17:16 UTC

CVSS 3.1 base score

8.1High

How severe the flaw is on the 0–10 CVSS scale.

EPSS: 0.5% chance of exploitation in 30 days – higher than 47% of CVEsExploit Prediction Scoring System: the likelihood attackers will use this flaw soon.

CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N

Attack Vector: Adjacent
Attack Complexity: Low
Privileges Required: None
User Interaction: None
Scope: Unchanged
Confidentiality: High
Integrity: High
Availability: None

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Adjacent: The vulnerable component is bound to the network stack, but the attack is limited at the protocol level to a logically adjacent topology. This can mean an attack must be launched from the same shared physical (e.g., Bluetooth or IEEE 802.11) or logical (e.g., local IP subnet) network, or from within a secure or otherwise limited administrative domain (e.g., MPLS, secure VPN to an administrative network zone).
Attack Complexity: Low: Specialized access conditions or extenuating circumstances do not exist. An attacker can expect repeatable success against the vulnerable component.
Privileges Required: None: The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files to carry out an attack.
User Interaction: None: The vulnerable system can be exploited without any interaction from any user.
Scope: Unchanged: An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
Confidentiality: High: There is total loss of confidentiality, resulting in all resources within the impacted component being divulged to the attacker. Alternatively, access to only some restricted information is obtained, but the disclosed information presents a direct, serious impact.
Integrity: High: There is a total loss of integrity, or a complete loss of protection. For example, the attacker is able to modify any/all files protected by the impacted component. Alternatively, only some files can be modified, but malicious modification would present a direct, serious consequence to the impacted component.
Availability: None: There is no impact to availability within the impacted component.

Definitions: FIRST CVSS v3.1 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 1 Nov 2024
Detectable: no evidence on record.
No public nuclei template indexed
Weaponised: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 26 Oct 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponised: Public exploit code exists in Metasploit or Exploit-DB, or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

AI-suggested

To mitigate CVE-2024-51431, organizations should first identify all instances of the LB-LINK BL-WR 1300H router version 1.0.4 within their networks. Immediate steps include disabling remote management interfaces and restricting access to the router’s administrative functions to trusted network segments only. Network segmentation should be enforced to isolate vulnerable devices from sensitive systems. Monitoring network traffic for unusual access patterns or login attempts targeting the router is critical. Since no official patches are currently available, consider replacing affected devices with models from vendors that do not use hardcoded credentials or that provide timely security updates. If replacement is not immediately feasible, applying compensating controls such as VPNs for remote access and enforcing strong network access controls can reduce exposure. Vendors and users should push for firmware updates that remove hardcoded credentials and allow users to set unique passwords. Additionally, conducting regular security audits and penetration testing focusing on network devices can help detect exploitation attempts early.

Description

LB-LINK BL-WR 1300H v.1.0.4 contains hardcoded credentials stored in /etc/shadow which are easily guessable.

Impact

The impact of CVE-2024-51431 is substantial for organizations using the LB-LINK BL-WR 1300H router, especially in environments where these devices serve as primary network gateways or are deployed in sensitive network segments. Unauthorized access through hardcoded credentials can lead to full compromise of the router, allowing attackers to intercept, modify, or redirect network traffic, resulting in loss of confidentiality and integrity. Attackers could also use the compromised router as a foothold to launch further attacks within the internal network, potentially accessing critical systems and data. The vulnerability does not directly affect availability, but manipulation of router configurations could cause network disruptions. Given the ease of exploitation without authentication or user interaction, the threat is elevated for organizations with adjacent network exposure, such as enterprises with wireless or segmented LANs. The absence of patches means the vulnerability could persist for extended periods, increasing the window for exploitation. This risk is particularly acute in sectors relying on these routers for secure communications, including small to medium enterprises, educational institutions, and possibly some government or critical infrastructure networks where LB-LINK devices are deployed.

CWE-798Use of Hard-coded Credentials (opens in a new tab)
Base weaknessLikelihood of exploit: HighOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
The product contains hard-coded credentials, such as a password or cryptographic key.
Architecture and Design
For outbound authentication: store passwords, keys, and other credentials outside of the code in a strongly-protected, encrypted configuration file or database that is protected from access by all outsiders, including other local users on the same system. Properly protect the key (CWE-320).
Architecture and Design
For inbound authentication: Rather than hard-code a default username and password, key, or other authentication credentials for first time logins, utilize a "first login" mode that requires the user to enter a unique strong password or key.
Architecture and Design
If the product must contain hard-coded credentials or they cannot be removed, perform access control checks and limit which entities can access the feature that requires the hard-coded credentials. For example, a feature might only be enabled through the system console instead of through a network connection.
OWASP Cheat Sheets
Key Management (opens in a new tab)
REST Security (opens in a new tab)
JSON Web Token for Java (opens in a new tab)
OWASP Authentication (opens in a new tab)
OWASP ASVS 4.0.3
V2.10.4 (opens in a new tab)
V6.4.1 (opens in a new tab)
V3.5.2 (opens in a new tab)
Attack patterns
Read Sensitive Constants Within an Executable (opens in a new tab)
Try Common or Default Usernames and Passwords (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Description

AI analysisMachine-generated, updated 28 Feb 2026, 02:57 UTC

WeaknessesCWE-798

Technical details

References

Community reviews

Related threats