CVE-2026-3039VulnerabilityPublished 8 Oct 2026Updated 29 Oct 2026

Red Hat Security Advisory: bind9.16 security, bug fix, and enhancement update

Affects Red Hat bind9.16 security,Source GCVE Database

Compare

Mentioned vulnerabilities

Authoritative record:CVE-2026-3039· High 7.5

Not known to be exploited · CVSS 7.5 High.

Data as of 29 Oct 2026, 07:59 UTC

CVSS 3.1 base score

7.5High

How severe the flaw is on the 0–10 CVSS scale.

EPSS: 1.0% chance of exploitation in 30 days – higher than 65% of CVEsExploit Prediction Scoring System: the likelihood attackers will use this flaw soon.

CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

Attack Vector: Network
Attack Complexity: Low
Privileges Required: None
User Interaction: None
Scope: Unchanged
Confidentiality: None
Integrity: None
Availability: High

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable component is bound to the network stack and the set of possible attackers extends beyond the other options listed, up to and including the entire Internet. Such a vulnerability is often termed 'remotely exploitable' and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: Low: Specialized access conditions or extenuating circumstances do not exist. An attacker can expect repeatable success against the vulnerable component.
Privileges Required: None: The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files to carry out an attack.
User Interaction: None: The vulnerable system can be exploited without any interaction from any user.
Scope: Unchanged: An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
Confidentiality: None: There is no loss of confidentiality within the impacted component.
Integrity: None: There is no loss of integrity within the impacted component.
Availability: High: There is total loss of availability, resulting in the attacker being able to fully deny access to resources in the impacted component; this loss is either sustained (while the attacker continues to deliver the attack) or persistent (the condition persists even after the attack has completed). Alternatively, the attacker has the ability to deny some availability, but the loss of availability presents a direct, serious consequence to the impacted component (e.g., the attacker cannot disrupt existing connections, but can prevent new connections; the attacker can repeatedly exploit a vulnerability that, in each instance of a successful attack, leaks a only small amount of memory, but after repeated exploitation causes a service to become completely unavailable).

Definitions: FIRST CVSS v3.1 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 20 May 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponized: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 29 Oct 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponized: A Metasploit exploit module or Exploit-DB entry exists (Metasploit scanner modules do not count), or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

Affected software

Product	Affected	Fixed in
ISCBIND 9	Affected >=9.0.0 <=9.16.50 >=9.18.0 <=9.18.48 >=9.20.0 <=9.20.22 >=9.21.0 <=9.21.21 >=9.9.3-S1 <=9.16.50-S1 >=9.18.11-S1 <=9.18.48-S1 >=9.20.9-S1 <=9.20.22-S1	Fixed in–
GitHubisc/bind9`pkg:github/isc/bind9`Other threats	Affected 9.0.0 – 9.21.0 7 affected builds	Fixed in–

Check your own hosts for these packages with threat-finder (opens in a new tab), our free open-source scanner.

AI-suggested

Red Hat has released an important security update for BIND 9.16 as part of Red Hat Enterprise Linux 8.8 updates. Applying this update will remediate the identified vulnerabilities. Users should follow Red Hat's official guidance for applying the update as detailed in https://access.redhat.com/articles/11258. No additional mitigation steps are indicated beyond applying the vendor-provided patch.

Description

Multiple security vulnerabilities have been identified and addressed in BIND 9.16, the Berkeley Internet Name Domain DNS implementation. These include memory exhaustion during GSS-API TKEY negotiation, denial of service via crafted DNS messages, DNSSEC validation bypasses, cache poisoning, and other issues affecting DNS server stability and security. Red Hat has released an important security update for Red Hat Enterprise Linux 8.8 that includes fixes for these vulnerabilities along with bug fixes and enhancements such as a new root trust anchor key for DNSSEC.

Impact

The vulnerabilities collectively could allow an attacker to cause denial of service conditions through memory exhaustion or specially crafted DNS messages, bypass DNSSEC validation leading to potential trust violations, bypass RPZ policy restrictions, cause cache poisoning which may redirect DNS queries, and cause unexpected server exits affecting availability. These impacts threaten the integrity, availability, and trustworthiness of DNS services running BIND 9.16 on affected Red Hat Enterprise Linux systems.

CWE-770Allocation of Resources Without Limits or Throttling (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #25
The product allocates a reusable resource or group of resources on behalf of an actor without imposing any intended restrictions on the size or number of resources that can be allocated.
Requirements
Clearly specify the minimum and maximum expectations for capabilities, and dictate which behaviors are acceptable when resource allocation reaches limits.
Architecture and Design
Limit the amount of resources that are accessible to unprivileged users. Set per-user limits for resources. Allow the system administrator to define these limits. Be careful to avoid CWE-410.
Architecture and Design
Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended.
OWASP Cheat Sheets
Abuse Case (opens in a new tab)
OWASP ASVS 4.0.3
V8.1.4 (opens in a new tab)
V13.4.1 (opens in a new tab)
V11.1.4 (opens in a new tab)
Attack patterns
XML Ping of the Death (opens in a new tab)
Exponential Data Expansion (opens in a new tab)
Serialized Data Parameter Blowup (opens in a new tab)
Serialized Data with Nested Payloads (opens in a new tab)
Oversized Serialized Data Payloads (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-1287Improper Validation of Specified Type of Input (opens in a new tab)
Base weakness
The product receives input that is expected to be of a certain type, but it does not validate or incorrectly validates that the input is actually of the expected type.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-345Insufficient Verification of Data Authenticity (opens in a new tab)
Class weaknessOWASP Top 10 A08:2025: Software or Data Integrity Failures (opens in a new tab)
The product does not sufficiently verify the origin or authenticity of data, in a way that causes it to accept invalid data.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
OWASP Cheat Sheets
XML Security (opens in a new tab)
REST Security (opens in a new tab)
JSON Web Token for Java (opens in a new tab)
REST Assessment (opens in a new tab)
Cross-Site Request Forgery Prevention (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.2 (opens in a new tab)
V3.5.3 (opens in a new tab)
V13.2.6 (opens in a new tab)
Attack patterns
JSON Hijacking (aka JavaScript Hijacking) (opens in a new tab)
Cache Poisoning (opens in a new tab)
DNS Cache Poisoning (opens in a new tab)
Spoofing of UDDI/ebXML Messages (opens in a new tab)
Application API Message Manipulation via Man-in-the-Middle (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-394Unexpected Status Code or Return Value (opens in a new tab)
Base weaknessOWASP Top 10 A10:2025: Mishandling of Exceptional Conditions (opens in a new tab)
The product does not properly check when a function or operation returns a value that is legitimate for the function, but is not expected by the product.
OWASP Cheat Sheets
Logging (opens in a new tab)
Error Handling (opens in a new tab)
OWASP ASVS 4.0.3
V11.1.7 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-400Uncontrolled Resource Consumption (opens in a new tab)
Class weaknessLikelihood of exploit: High
The product does not properly control the allocation and maintenance of a limited resource.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
Architecture and Design
Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended. A strong authentication and access control model will help prevent such attacks from occurring in the first place.
Architecture and Design
Mitigation of resource exhaustion attacks requires that the target system either: recognizes the attack and denies that user further access for a given amount of time, or; uniformly throttles all requests in order to make it more difficult to consume resources more quickly than they can again be freed.
Architecture and Design
Ensure that protocols have specific limits of scale placed on them.
OWASP Cheat Sheets
File Upload (opens in a new tab)
OWASP ASVS 4.0.3
V12.1.1 (opens in a new tab)
Attack patterns
XML Ping of the Death (opens in a new tab)
Regular Expression Exponential Blowup (opens in a new tab)
Sustained Client Engagement (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-617Reachable Assertion (opens in a new tab)
Base weakness
The product contains an assert() or similar statement that can be triggered by an attacker, which leads to an application exit or other behavior that is more severe than necessary.
Implementation
If the assertion statement is required (e.g., for security or reliability), change the invoking code to avoid the conditions that trigger the assertion.
Implementation
Consider changing the assertion to some other less "fatal" error. This might not be easy to implement, since other code may be needed to handle the error.
Implementation
Make sensitive open/close operations non-reachable from directly user-controlled data (e.g. open/close resources)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Affected software

Description

AI analysisMachine-generated, updated 29 Oct 2026, 07:59 UTC

WeaknessesCWE-770, CWE-1287, CWE-345 +3

Technical details

References

Community reviews

Related threats