CVE-2025-7195VulnerabilityPublished 24 Mar 2026Updated 30 Oct 2026

Red Hat Security Advisory: Red Hat Advanced Cluster Management for Kubernetes v2.12.8 security update

Affects Red HatSource GCVE Database

Compare

Authoritative record:CVE-2025-7195· Medium 6.4

Not known to be exploited · CVSS 6.4 Medium : upgrade Red Hat operator-sdk to 0.15.2 when convenient.

Data as of 30 Oct 2026, 11:52 UTC

CVSS 3.1 base score

6.4Medium

How severe the flaw is on the 0–10 CVSS scale.

EPSS: 0.2% chance of exploitation in 30 days – higher than 15% of CVEsExploit Prediction Scoring System: the likelihood attackers will use this flaw soon.
Patch: Available – fixed in 0.15.2

CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H

Attack Vector: Local
Attack Complexity: High
Privileges Required: High
User Interaction: None
Scope: Unchanged
Confidentiality: High
Integrity: High
Availability: High

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Local: The vulnerable component is not bound to the network stack and the attacker’s path is via read/write/execute capabilities. Either: the attacker exploits the vulnerability by accessing the target system locally (e.g., keyboard, console), or remotely (e.g., SSH); or the attacker relies on User Interaction by another person to perform actions required to exploit the vulnerability (e.g., tricking a legitimate user into opening a malicious document).
Attack Complexity: High: A successful attack depends on conditions beyond the attacker's control. That is, a successful attack cannot be accomplished at will, but requires the attacker to invest in some measurable amount of effort in preparation or execution against the vulnerable component before a successful attack can be expected. For example, a successful attack may require an attacker to: gather knowledge about the environment in which the vulnerable target/component exists; prepare the target environment to improve exploit reliability; or inject themselves into the logical network path between the target and the resource requested by the victim in order to read and/or modify network communications (e.g., a man in the middle attack).
Privileges Required: High: The attacker is authorized with (i.e., requires) privileges that provide significant (e.g., administrative) control over the vulnerable component that could affect component-wide settings and files.
User Interaction: None: The vulnerable system can be exploited without any interaction from any user.
Scope: Unchanged: An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
Confidentiality: High: There is total loss of confidentiality, resulting in all resources within the impacted component being divulged to the attacker. Alternatively, access to only some restricted information is obtained, but the disclosed information presents a direct, serious impact.
Integrity: High: There is a total loss of integrity, or a complete loss of protection. For example, the attacker is able to modify any/all files protected by the impacted component. Alternatively, only some files can be modified, but malicious modification would present a direct, serious consequence to the impacted component.
Availability: High: There is total loss of availability, resulting in the attacker being able to fully deny access to resources in the impacted component; this loss is either sustained (while the attacker continues to deliver the attack) or persistent (the condition persists even after the attack has completed). Alternatively, the attacker has the ability to deny some availability, but the loss of availability presents a direct, serious consequence to the impacted component (e.g., the attacker cannot disrupt existing connections, but can prevent new connections; the attacker can repeatedly exploit a vulnerability that, in each instance of a successful attack, leaks a only small amount of memory, but after repeated exploitation causes a service to become completely unavailable).

Definitions: FIRST CVSS v3.1 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 7 Aug 2025
Detectable: no evidence on record.
No public nuclei template indexed
Weaponized: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 30 Oct 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponized: A Metasploit exploit module or Exploit-DB entry exists (Metasploit scanner modules do not count), or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

Upgrade operator-sdk to 0.15.2.

Affected software

Product	Affected	Fixed in
operator-frameworkoperator-sdk	Affected <0.15.2	Fixed in 0.15.2
GitHuboperator-sdk`pkg:github/operator-sdk`Other threats	Affected <0.15.2	Fixed in 0.15.2

Check your own hosts for these packages with threat-finder (opens in a new tab), our free open-source scanner.

AI-suggested

A fixed version (2.12.8) of Red Hat Advanced Cluster Management for Kubernetes is available and should be applied. Before updating, ensure all previously released errata relevant to your system are installed. The vendor advisory provides detailed instructions for applying the update. Additionally, to mitigate the Lodash prototype pollution vulnerability, implement strict input validation to block user input that attempts to manipulate prototype properties such as __proto__, constructor, and prototype. No other specific mitigations are indicated by the vendor advisory.

Description

Red Hat Advanced Cluster Management for Kubernetes 2.12 images Red Hat Advanced Cluster Management for Kubernetes provides the capabilities to address common challenges that administrators and site reliability engineers face as they work across a range of public and private cloud environments. Clusters and applications are all visible and managed from a single console—with security policy built in. This advisory contains the container images for Red Hat Advanced Cluster Management for Kubernetes, which add new features and enhancements, bug fixes, and updated container images. See the following Release Notes documentation, which will be updated shortly for this release, for additional details about this release: https://docs.redhat.com/en/documentation/red_hat_advanced_cluster_management_for_kubernetes/2.12/html-single/release_notes/index#acm-release-notes

Impact

The primary impact of the prototype pollution vulnerability (CVE-2025-7195) is denial of service by deleting methods from global prototypes, which can disrupt application functionality. There is no reported impact on confidentiality or integrity. The vulnerability is exploitable only if user input controls property paths passed to Lodash functions. No known exploits are currently active in the wild. Other CVEs addressed in the update may have varying impacts, but the overall severity is rated high due to the potential for denial of service and other issues fixed in the update.

Summary

The security advisory for Red Hat Advanced Cluster Management for Kubernetes addresses several vulnerabilities, including CVE-2025-7195, a prototype pollution flaw in Lodash's _.unset and _.omit functions. This flaw allows an attacker controlling property paths to delete methods from global prototypes, potentially causing denial of service by removing essential functionalities. The vulnerability requires that user input controls the property path passed to these functions. The advisory provides updated container images in version 2.12.8 that include fixes and enhancements. The vulnerability affects versions >=2.12.0 and <2.12.8. Red Hat's analysis indicates the impact is limited to denial of service, with no confidentiality or integrity compromise. No active exploitation is known. The vendor advisory recommends applying the update to 2.12.8 and ensuring prior errata are applied.

CWE-276Incorrect Default Permissions (opens in a new tab)
Base weaknessLikelihood of exploit: MediumOWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
During installation, installed file permissions are set to allow anyone to modify those files.
Architecture and Design · Operation
The architecture needs to access and modification attributes for files to only those users who actually require those actions.
Architecture and Design · Separation of Privilege
Compartmentalize the system to have "safe" areas where trust boundaries can be unambiguously drawn. Do not allow sensitive data to go outside of the trust boundary and always be careful when interfacing with a compartment outside of the safe area.
OWASP Cheat Sheets
Access Control (opens in a new tab)
Authorization Testing Automation (opens in a new tab)
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V8.3.8 (opens in a new tab)
V13.4.2 (opens in a new tab)
Attack patterns
Accessing Functionality Not Properly Constrained by ACLs (opens in a new tab)
Directory Indexing (opens in a new tab)
Web Server Logs Tampering (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-1321Improperly Controlled Modification of Object Prototype Attributes (Prototype Pollution) (opens in a new tab)
Variant weakness
The product receives input from an upstream component that specifies attributes that are to be initialized or updated in an object, but it does not properly control modifications of attributes of the object prototype.
Implementation
By freezing the object prototype first (for example, Object.freeze(Object.prototype)), modification of the prototype becomes impossible.
Architecture and Design
By blocking modifications of attributes that resolve to object prototype, such as proto or prototype, this weakness can be mitigated.
Implementation · Input Validation
When handling untrusted objects, validating using a schema can be used.
OWASP Cheat Sheets
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V5.1.2 (opens in a new tab)
Attack patterns
Accessing Functionality Not Properly Constrained by ACLs (opens in a new tab)
Exploiting Incorrectly Configured Access Control Security Levels (opens in a new tab)
Manipulating User-Controlled Variables (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-362Concurrent Execution using Shared Resource with Improper Synchronization (Race Condition) (opens in a new tab)
Class weaknessLikelihood of exploit: MediumOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The product contains a concurrent code sequence that requires temporary, exclusive access to a shared resource, but a timing window exists in which the shared resource can be modified by another code sequence operating concurrently.
Architecture and Design
In languages that support it, use synchronization primitives. Only wrap these around critical code to minimize the impact on performance.
Architecture and Design
Use thread-safe capabilities such as the data access abstraction in Spring.
Architecture and Design
Minimize the usage of shared resources in order to remove as much complexity as possible from the control flow and to reduce the likelihood of unexpected conditions occurring.
OWASP Cheat Sheets
Abuse Case (opens in a new tab)
Secure Design Principles (opens in a new tab)
OWASP ASVS 4.0.3
V1.11.2 (opens in a new tab)
Attack patterns
Leveraging Time-of-Check and Time-of-Use (TOCTOU) Race Conditions (opens in a new tab)
Leveraging Race Conditions (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-770Allocation of Resources Without Limits or Throttling (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #25
The product allocates a reusable resource or group of resources on behalf of an actor without imposing any intended restrictions on the size or number of resources that can be allocated.
Requirements
Clearly specify the minimum and maximum expectations for capabilities, and dictate which behaviors are acceptable when resource allocation reaches limits.
Architecture and Design
Limit the amount of resources that are accessible to unprivileged users. Set per-user limits for resources. Allow the system administrator to define these limits. Be careful to avoid CWE-410.
Architecture and Design
Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended.
OWASP Cheat Sheets
Abuse Case (opens in a new tab)
OWASP ASVS 4.0.3
V8.1.4 (opens in a new tab)
V13.4.1 (opens in a new tab)
V11.1.4 (opens in a new tab)
Attack patterns
XML Ping of the Death (opens in a new tab)
Exponential Data Expansion (opens in a new tab)
Serialized Data Parameter Blowup (opens in a new tab)
Serialized Data with Nested Payloads (opens in a new tab)
Oversized Serialized Data Payloads (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-639Authorization Bypass Through User-Controlled Key (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #24OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The system's authorization functionality does not prevent one user from gaining access to another user's data or record by modifying the key value identifying the data.
Architecture and Design
For each and every data access, ensure that the user has sufficient privilege to access the record that is being requested.
Architecture and Design · Implementation
Make sure that the key that is used in the lookup of a specific user's record is not controllable externally by the user or that any tampering can be detected.
Architecture and Design
Use encryption in order to make it more difficult to guess other legitimate values of the key or associate a digital signature with the key so that the server can verify that there has been no tampering.
OWASP Cheat Sheets
Access Control (opens in a new tab)
Authorization Testing Automation (opens in a new tab)
Cross-Site Request Forgery Prevention (opens in a new tab)
Insecure Direct Object Reference Prevention (opens in a new tab)
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V4.1.2 (opens in a new tab)
V4.2.1 (opens in a new tab)
V8.3.8 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-79Improper Neutralization of Input During Web Page Generation (Cross-site Scripting) (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #1OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product does not neutralize or incorrectly neutralizes user-controllable input before it is placed in output that is used as a web page that is served to other users.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Implementation · Architecture and Design
Understand the context in which your data will be used and the encoding that will be expected. This is especially important when transmitting data between different components, or when generating outputs that can contain multiple encodings at the same time, such as web pages or multi-part mail messages.
Architecture and Design · Implementation · Attack Surface Reduction
Understand all the potential areas where untrusted inputs can enter your software: parameters or arguments, cookies, anything read from the network, environment variables, reverse DNS lookups, query results, request headers, URL components, e-mail, files, filenames, databases, and any external systems that provide…
OWASP Cheat Sheets
Cross Site Scripting Prevention (opens in a new tab)
DOM based XSS Prevention (opens in a new tab)
Injection Prevention (opens in a new tab)
Abuse Case (opens in a new tab)
Deserialization (opens in a new tab)
OWASP ASVS 4.0.3
V5.3.3 (opens in a new tab)
V1.5.1 (opens in a new tab)
Attack patterns
XSS Using MIME Type Mismatch (opens in a new tab)
DOM-Based XSS (opens in a new tab)
Reflected XSS (opens in a new tab)
Stored XSS (opens in a new tab)
Cross-Site Scripting (XSS) (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-1287Improper Validation of Specified Type of Input (opens in a new tab)
Base weakness
The product receives input that is expected to be of a certain type, but it does not validate or incorrectly validates that the input is actually of the expected type.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-330Use of Insufficiently Random Values (opens in a new tab)
Class weaknessLikelihood of exploit: HighOWASP Top 10 A04:2025: Cryptographic Failures (opens in a new tab)
The product uses insufficiently random numbers or values in a security context that depends on unpredictable numbers.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
Architecture and Design
Use a well-vetted algorithm that is currently considered to be strong by experts in the field, and select well-tested implementations with adequate length seeds.
Implementation
Consider a PRNG that re-seeds itself as needed from high quality pseudo-random output sources, such as hardware devices.
Architecture and Design · Requirements · Libraries or Frameworks
Use products or modules that conform to FIPS 140-2 to avoid obvious entropy problems. Consult FIPS 140-2 Annex C ("Approved Random Number Generators").
OWASP Cheat Sheets
Forgot Password (opens in a new tab)
Transport Layer Protection (opens in a new tab)
User Privacy Protection (opens in a new tab)
Password Storage (opens in a new tab)
Cryptographic Storage (opens in a new tab)
OWASP ASVS 4.0.3
V2.3.1 (opens in a new tab)
V2.6.2 (opens in a new tab)
V2.7.6 (opens in a new tab)
Attack patterns
Signature Spoofing by Key Recreation (opens in a new tab)
Session Credential Falsification through Prediction (opens in a new tab)
Brute Force (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-20Improper Input Validation (opens in a new tab)
Class weaknessLikelihood of exploit: HighCWE Top 25 (2025): #18OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product receives input or data, but it does not validate or incorrectly validates that the input has the properties that are required to process the data safely and correctly.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
Architecture and Design · Attack Surface Reduction
Consider using language-theoretic security (LangSec) techniques that characterize inputs using a formal language and build "recognizers" for that language. This effectively requires parsing to be a distinct layer that effectively enforces a boundary between raw input and internal data representations, instead of…
Architecture and Design · Libraries or Frameworks
Use an input validation framework such as Struts or the OWASP ESAPI Validation API. Note that using a framework does not automatically address all input validation problems; be mindful of weaknesses that could arise from misusing the framework itself (CWE-1173).
Architecture and Design · Implementation · Attack Surface Reduction
Understand all the potential areas where untrusted inputs can enter the product, including but not limited to: parameters or arguments, cookies, anything read from the network, environment variables, reverse DNS lookups, query results, request headers, URL components, e-mail, files, filenames, databases, and any…
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
Injection Prevention (opens in a new tab)
SQL Injection Prevention (opens in a new tab)
Injection Prevention in Java (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
Attack patterns
Buffer Overflow via Environment Variables (opens in a new tab)
Server Side Include (SSI) Injection (opens in a new tab)
Cross Zone Scripting (opens in a new tab)
Command Line Execution through SQL Injection (opens in a new tab)
Object Relational Mapping Injection (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-94Improper Control of Generation of Code (Code Injection) (opens in a new tab)
Base weaknessLikelihood of exploit: MediumCWE Top 25 (2025): #10OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product constructs all or part of a code segment using externally-influenced input from an upstream component, but it does not neutralize or incorrectly neutralizes special elements that could modify the syntax or behavior of the intended code segment.
Architecture and Design · Refactoring
Refactor your program so that you do not have to dynamically generate code.
Architecture and Design
Run your code in a "jail" or similar sandbox environment that enforces strict boundaries between the process and the operating system. This may effectively restrict which code can be executed by your product.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
OWASP Cheat Sheets
Server Side Request Forgery Prevention (opens in a new tab)
Unvalidated Redirects and Forwards (opens in a new tab)
Cross Site Scripting Prevention (opens in a new tab)
DOM based XSS Prevention (opens in a new tab)
Abuse Case (opens in a new tab)
OWASP ASVS 4.0.3
V5.2.8 (opens in a new tab)
V5.2.5 (opens in a new tab)
V1.5.1 (opens in a new tab)
Attack patterns
Leverage Executable Code in Non-Executable Files (opens in a new tab)
Manipulating User-Controlled Variables (opens in a new tab)
Code Injection (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Affected software

Description

AI analysisMachine-generated, updated 14 Aug 2026, 23:01 UTC

WeaknessesCWE-276, CWE-1321, CWE-362 +7

Technical details

References

Community reviews

Related threats