Red Hat Security Advisory: Red Hat Advanced Cluster Management for Kubernetes v2.11.10 security update
Affects Red HatSource GCVE Database
Not known to be exploited · CVSS 9.1 Critical.
Data as of 30 Oct 2026, 05:59 UTC
Thin evidence
One scorer or none| CNA (harborist) | CVSS 4.0 | 9.1 |
|---|
CVSS:4.0/AV:N/AC:H/AT:P/PR:N/UI:N/VC:N/VI:H/VA:H/SC:H/SI:H/SA:N- Attack Vector
- Network
- Attack Complexity
- High
- Attack Requirements
- Present
- Privileges Required
- None
- User Interaction
- None
- Vulnerable system confidentiality
- None
- Vulnerable system integrity
- High
- Vulnerable system availability
- High
- Subsequent system confidentiality
- High
- Subsequent system integrity
- High
- Subsequent system availability
- None
Bold values are the worst case: easiest to exploit or largest impact.
- Attack Vector: Network
- The vulnerable system is bound to the network stack and the set of possible attackers extends beyond the other options listed below, up to and including the entire Internet. Such a vulnerability is often termed “remotely exploitable” and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
- Attack Complexity: High
- The successful attack depends on the evasion or circumvention of security-enhancing techniques in place that would otherwise hinder the attack. These include: Evasion of exploit mitigation techniques, for example, circumvention of address space randomization (ASLR) or data execution prevention (DEP) must be performed for the attack to be successful; Obtaining target-specific secrets. The attacker must gather some target-specific secret before the attack can be successful. A secret is any piece of information that cannot be obtained through any amount of reconnaissance. To obtain the secret the attacker must perform additional attacks or break otherwise secure measures (e.g. knowledge of a secret key may be needed to break a crypto channel). This operation must be performed for each attacked target.
- Attack Requirements: Present
- The successful attack depends on the presence of specific deployment and execution conditions of the vulnerable system that enable the attack. These include: a race condition must be won to successfully exploit the vulnerability (the successfulness of the attack is conditioned on execution conditions that are not under full control of the attacker, or the attack may need to be launched multiple times against a single target before being successful); the attacker must inject themselves into the logical network path between the target and the resource requested by the victim (e.g. vulnerabilities requiring an on-path attacker).
- Privileges Required: None
- The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files of the vulnerable system to carry out an attack.
- User Interaction: None
- The vulnerable system can be exploited without interaction from any human user, other than the attacker.
- Vulnerable system confidentiality: None
- There is no loss of confidentiality within the Vulnerable System.
- Vulnerable system integrity: High
- There is a total loss of integrity, or a complete loss of protection. For example, the attacker is able to modify any/all files protected by the vulnerable system. Alternatively, only some files can be modified, but malicious modification would present a direct, serious consequence to the vulnerable system.
- Vulnerable system availability: High
- There is a total loss of availability, resulting in the attacker being able to fully deny access to resources in the Vulnerable System; this loss is either sustained (while the attacker continues to deliver the attack) or persistent (the condition persists even after the attack has completed). Alternatively, the attacker has the ability to deny some availability, but the loss of availability presents a direct, serious consequence to the Vulnerable System (e.g., the attacker cannot disrupt existing connections, but can prevent new connections; the attacker can repeatedly exploit a vulnerability that, in each instance of a successful attack, leaks a only small amount of memory, but after repeated exploitation causes a service to become completely unavailable).
- Subsequent system confidentiality: High
- There is a total loss of confidentiality, resulting in all resources within the Subsequent System being divulged to the attacker. Alternatively, access to only some restricted information is obtained, but the disclosed information presents a direct, serious impact. For example, an attacker steals the administrator's password, or private encryption keys of a web server.
- Subsequent system integrity: High
- There is a total loss of integrity, or a complete loss of protection. For example, the attacker is able to modify any/all files protected by the Subsequent System. Alternatively, only some files can be modified, but malicious modification would present a direct, serious consequence to the Subsequent System.
- Subsequent system availability: None
- There is no impact to availability within the Subsequent System or all availability impact is constrained to the Vulnerable System.
Definitions: FIRST CVSS v4.0 specification.
Exploitation evidence
Disclosed: evidence found.
CVE published 20 Aug 2025
Detectable: no evidence on record.
No public nuclei template indexed
Weaponized: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors
A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 29 Oct 2026.
- Disclosed
- The CVE record is public on cve.org. Its publication is t = 0.
- Detectable
- A public nuclei template can find exposed instances, for defenders and attackers alike.
- Weaponized
- A Metasploit exploit module or Exploit-DB entry exists (Metasploit scanner modules do not count), or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
- Exploited in the wild
- CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
- Observed by OffSeq Mirage
- OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.
Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.
What to do
AI-suggested
A security update is available in Red Hat Advanced Cluster Management for Kubernetes version 2.11.10. Users should apply this update following Red Hat's official guidance after ensuring all previously released relevant errata are applied. Refer to https://access.redhat.com/articles/11258 for update instructions. No additional mitigation steps are indicated by the vendor advisory.
Description
Red Hat Advanced Cluster Management for Kubernetes 2.11.10 includes updated container images with new features, enhancements, and bug fixes. This security advisory addresses multiple vulnerabilities identified by CVE identifiers, including CVE-2025-9288. The advisory does not specify details about the individual vulnerabilities or their impacts but categorizes the update as important. Users are advised to apply this update after ensuring all previous relevant errata are installed.
Impact
The advisory indicates a high severity level for the vulnerabilities addressed but does not provide explicit details on the impact of CVE-2025-9288 or other CVEs. The vulnerabilities could potentially affect the security and reliability of the Red Hat Advanced Cluster Management for Kubernetes environment. No known exploits in the wild are reported at this time.
- CWE-20Improper Input Validation (opens in a new tab)
Class weaknessLikelihood of exploit: HighCWE Top 25 (2025): #18OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product receives input or data, but it does not validate or incorrectly validates that the input has the properties that are required to process the data safely and correctly.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
Architecture and Design · Attack Surface Reduction
Consider using language-theoretic security (LangSec) techniques that characterize inputs using a formal language and build "recognizers" for that language. This effectively requires parsing to be a distinct layer that effectively enforces a boundary between raw input and internal data representations, instead of…
Architecture and Design · Libraries or Frameworks
Use an input validation framework such as Struts or the OWASP ESAPI Validation API. Note that using a framework does not automatically address all input validation problems; be mindful of weaknesses that could arise from misusing the framework itself (CWE-1173).
Architecture and Design · Implementation · Attack Surface Reduction
Understand all the potential areas where untrusted inputs can enter the product, including but not limited to: parameters or arguments, cookies, anything read from the network, environment variables, reverse DNS lookups, query results, request headers, URL components, e-mail, files, filenames, databases, and any…
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-1321Improperly Controlled Modification of Object Prototype Attributes (Prototype Pollution) (opens in a new tab)
Variant weakness
The product receives input from an upstream component that specifies attributes that are to be initialized or updated in an object, but it does not properly control modifications of attributes of the object prototype.
Implementation
By freezing the object prototype first (for example, Object.freeze(Object.prototype)), modification of the prototype becomes impossible.
Architecture and Design
By blocking modifications of attributes that resolve to object prototype, such as proto or prototype, this weakness can be mitigated.
Implementation · Input Validation
When handling untrusted objects, validating using a schema can be used.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-639Authorization Bypass Through User-Controlled Key (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #24OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The system's authorization functionality does not prevent one user from gaining access to another user's data or record by modifying the key value identifying the data.
Architecture and Design
For each and every data access, ensure that the user has sufficient privilege to access the record that is being requested.
Architecture and Design · Implementation
Make sure that the key that is used in the lookup of a specific user's record is not controllable externally by the user or that any tampering can be detected.
Architecture and Design
Use encryption in order to make it more difficult to guess other legitimate values of the key or associate a digital signature with the key so that the server can verify that there has been no tampering.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-79Improper Neutralization of Input During Web Page Generation (Cross-site Scripting) (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #1OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product does not neutralize or incorrectly neutralizes user-controllable input before it is placed in output that is used as a web page that is served to other users.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Implementation · Architecture and Design
Understand the context in which your data will be used and the encoding that will be expected. This is especially important when transmitting data between different components, or when generating outputs that can contain multiple encodings at the same time, such as web pages or multi-part mail messages.
Architecture and Design · Implementation · Attack Surface Reduction
Understand all the potential areas where untrusted inputs can enter your software: parameters or arguments, cookies, anything read from the network, environment variables, reverse DNS lookups, query results, request headers, URL components, e-mail, files, filenames, databases, and any external systems that provide…
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-1287Improper Validation of Specified Type of Input (opens in a new tab)
Base weakness
The product receives input that is expected to be of a certain type, but it does not validate or incorrectly validates that the input is actually of the expected type.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-295Improper Certificate Validation (opens in a new tab)
Base weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
The product does not validate, or incorrectly validates, a certificate.
Architecture and Design · Implementation
Certificates should be carefully managed and checked to assure that data are encrypted with the intended owner's public key.
Implementation
If certificate pinning is being used, ensure that all relevant properties of the certificate are fully validated before the certificate is pinned, including the hostname.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-201Insertion of Sensitive Information Into Sent Data (opens in a new tab)
Base weaknessOWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The code transmits data to another actor, but a portion of the data includes sensitive information that should not be accessible to that actor.
Requirements
Specify which data in the software should be regarded as sensitive. Consider which types of users should have access to which types of data.
Implementation
Ensure that any possibly sensitive data specified in the requirements is verified with designers to ensure that it is either a calculated risk or mitigated elsewhere.
System Configuration
Setup default error messages so that unexpected errors do not disclose sensitive information.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-770Allocation of Resources Without Limits or Throttling (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #25
The product allocates a reusable resource or group of resources on behalf of an actor without imposing any intended restrictions on the size or number of resources that can be allocated.
Requirements
Clearly specify the minimum and maximum expectations for capabilities, and dictate which behaviors are acceptable when resource allocation reaches limits.
Architecture and Design
Limit the amount of resources that are accessible to unprivileged users. Set per-user limits for resources. Allow the system administrator to define these limits. Be careful to avoid CWE-410.
Architecture and Design
Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-289Authentication Bypass by Alternate Name (opens in a new tab)
Base weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
The product performs authentication based on the name of a resource being accessed, or the name of the actor performing the access, but it does not properly check all possible names for that resource or actor.
Architecture and Design · Input Validation
Avoid making decisions based on names of resources (e.g. files) if those resources can have alternate names.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Implementation · Input Validation
Inputs should be decoded and canonicalized to the application's current internal representation before being validated (CWE-180). Make sure that the application does not decode the same input twice (CWE-174).
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-915Improperly Controlled Modification of Dynamically-Determined Object Attributes (opens in a new tab)
Base weaknessOWASP Top 10 A08:2025: Software or Data Integrity Failures (opens in a new tab)
The product receives input from an upstream component that specifies multiple attributes, properties, or fields that are to be initialized or updated in an object, but it does not properly control which attributes can be modified.
Implementation
If available, use features of the language or framework that allow specification of allowlists of attributes or fields that are allowed to be modified. If possible, prefer allowlists over denylists.
Architecture and Design · Implementation
If available, use the signing/sealing features of the programming language to assure that deserialized data has not been tainted. For example, a hash-based message authentication code (HMAC) could be used to ensure that data has not been modified.
Implementation · Input Validation
For any externally-influenced input, check the input against an allowlist of internal object attributes or fields that are allowed to be modified.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-1333Inefficient Regular Expression Complexity (opens in a new tab)
Base weaknessLikelihood of exploit: High
The product uses a regular expression with a worst-case computational complexity that is inefficient and possibly exponential.
Architecture and Design
Use regular expressions that do not support backtracking, e.g. by removing nested quantifiers.
System Configuration
Set backtracking limits in the configuration of the regular expression implementation, such as PHP's pcre.backtrack_limit. Also consider limits on execution time for the process.
Implementation
Do not use regular expressions with untrusted input. If regular expressions must be used, avoid using backtracking in the expression.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
- Attack patterns
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-190Integer Overflow or Wraparound (opens in a new tab)
Base weaknessLikelihood of exploit: Medium
The product performs a calculation that can produce an integer overflow or wraparound when the logic assumes that the resulting value will always be larger than the original value. This occurs when an integer value is incremented to a value that is too large to store in the associated representation. When this occurs, the value may become a very small or negative number.
Requirements
Ensure that all protocols are strictly defined, such that all out-of-bounds behavior can be identified simply, and require strict conformance to the protocol.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
- OWASP Cheat Sheets
- Attack patterns
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-835Loop with Unreachable Exit Condition (Infinite Loop) (opens in a new tab)
Base weakness
The product contains an iteration or loop with an exit condition that cannot be reached, i.e., an infinite loop.
- GCVE source
- db.gcve.eu
- Csaf Category
- csaf_security_advisory
- Csaf Version
- 2.0
- Publisher
- Red Hat Product Security
- Advisory ID
- RHSA-2026:41064
- Vendor Severity
- high
- CVE Count
- 16
- Additional Cves
- CVE-2025-13465, CVE-2026-21721, CVE-2026-22029, CVE-2026-25639, CVE-2026-42508, CVE-2026-44486, CVE-2026-44487, CVE-2026-44488, CVE-2026-44492, CVE-2026-44494, CVE-2026-44495, CVE-2026-44496, CVE-2026-44990, CVE-2026-46384, CVE-2026-46385
References
- access.redhat.com/errata/RHSA-2026:41064 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2025-13465 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2025-9288 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-21721 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-22029 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-25639 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-42508 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-44486 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-44487 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-44488 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-44492 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-44494 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-44495 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-44496 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-44990 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-46384 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-46385 (opens in a new tab)
- access.redhat.com/security/updates/classification/ (opens in a new tab)
- access.redhat.com/security/updates/classification/ (opens in a new tab)
- security.access.redhat.com/data/csaf/v2/advisories/2026/rhsa-2026_41064.json (opens in a new tab)
Community reviews
Related threats
- Red Hat Security Advisory: .NET 8.0 security, bug fix, and enhancement updateHighVulnerability
- Red Hat Security Advisory: .NET 9.0 security, bug fix, and enhancement updateHighVulnerability
- Red Hat Security Advisory: .NET 8.0 security, bug fix, and enhancement updateHighVulnerability
- Red Hat Security Advisory: .NET 9.0 security, bug fix, and enhancement updateHighVulnerability
- Red Hat Security Advisory: .NET 8.0 security, bug fix, and enhancement updateHighVulnerability