CVE-2026-28374VulnerabilityPublished 17 Sep 2026Updated 5 Nov 2026

Red Hat Security Advisory: Red Hat Hardened Images RPMs bug fix and enhancement update

Affects Red HatSource GCVE Database

Compare

Mentioned vulnerabilities

CVE-2026-33380

Authoritative record:CVE-2026-28374· Medium 4.3

Not known to be exploited · CVSS 4.3 Medium · fixed in Red Hat package updates : update Red Hat when convenient.

Data as of 5 Nov 2026, 21:05 UTC

CVSS 3.1 base score

4.3Medium

How severe the flaw is on the 0–10 CVSS scale.

Patch: Available – fixed in 13.0.1+security-01, 12.4.3+security-02, 12.3.6+security-04 +2

CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N

Attack Vector: Network
Attack Complexity: Low
Privileges Required: Low
User Interaction: None
Scope: Unchanged
Confidentiality: None
Integrity: Low
Availability: None

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable component is bound to the network stack and the set of possible attackers extends beyond the other options listed, up to and including the entire Internet. Such a vulnerability is often termed 'remotely exploitable' and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: Low: Specialized access conditions or extenuating circumstances do not exist. An attacker can expect repeatable success against the vulnerable component.
Privileges Required: Low: The attacker is authorized with (i.e., requires) privileges that provide basic user capabilities that could normally affect only settings and files owned by a user. Alternatively, an attacker with Low privileges may have the ability to cause an impact only to non-sensitive resources.
User Interaction: None: The vulnerable system can be exploited without any interaction from any user.
Scope: Unchanged: An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
Confidentiality: None: There is no loss of confidentiality within the impacted component.
Integrity: Low: Modification of data is possible, but the attacker does not have control over the consequence of a modification, or the amount of modification is limited. The data modification does not have a direct, serious impact on the impacted component.
Availability: None: There is no impact to availability within the impacted component.

Definitions: FIRST CVSS v3.1 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 13 May 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponized: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 5 Nov 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponized: A Metasploit exploit module or Exploit-DB entry exists (Metasploit scanner modules do not count), or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

Upgrade to a fixed release listed under Affected software.

Affected software

Product	Affected	Fixed in
GrafanaGrafana OSS	Affected >=8.5.0 <=11.6.14 >=11.6.14 <11.6.14+security-04 >=12.0.0 <=12.2.8 >=12.2.8 <12.2.8+security-04 >=12.3.0 <=12.3.6 >=12.3.6 <12.3.6+security-04 >=12.4.0 <=12.4.3 >=12.4.3 <12.4.3+security-02 >=13.0.0 <=13.0.1 >=13.0.1 <13.0.1+security-01	Fixed in 13.0.1+security-01 12.4.3+security-02 12.3.6+security-04 12.2.8+security-04 11.6.14+security-04

AI-suggested

A fix is available in the Red Hat Hardened Images RPMs update including grafana13.1-13.1.6-0.1.hum1 packages. Users should apply this update as per Red Hat's advisory instructions. No additional mitigations are specified or required beyond applying the update.

Description

A vulnerability in Grafana's SQL Expressions feature allows an authenticated attacker to read arbitrary files from the server filesystem, leading to information disclosure. This issue occurs only when the sqlExpressions feature toggle is enabled. The vulnerability is addressed in Red Hat Hardened Images RPMs update including grafana13.1-13.1.6-0.1.hum1 packages.

CWE-1220Insufficient Granularity of Access Control (opens in a new tab)
Base weakness
The product implements access controls via a policy or other feature with the intention to disable or restrict accesses (reads and/or writes) to assets in a system from untrusted agents. However, implemented access controls lack the required granularity
Architecture and Design · Implementation · Testing
Access-control-policy protections must be reviewed for design inconsistency and common weaknesses.; Access-control-policy definition and programming flow must be tested in pre-silicon, post-silicon testing.
OWASP Cheat Sheets
Docker Security (opens in a new tab)
Third Party Javascript Management (opens in a new tab)
Virtual Patching (opens in a new tab)
OWASP ASVS 4.0.3
V1.4.4 (opens in a new tab)
V1.4.5 (opens in a new tab)
V1.10.1 (opens in a new tab)
Attack patterns
Accessing Functionality Not Properly Constrained by ACLs (opens in a new tab)
Exploiting Incorrectly Configured Access Control Security Levels (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-770Allocation of Resources Without Limits or Throttling (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #25
The product allocates a reusable resource or group of resources on behalf of an actor without imposing any intended restrictions on the size or number of resources that can be allocated.
Requirements
Clearly specify the minimum and maximum expectations for capabilities, and dictate which behaviors are acceptable when resource allocation reaches limits.
Architecture and Design
Limit the amount of resources that are accessible to unprivileged users. Set per-user limits for resources. Allow the system administrator to define these limits. Be careful to avoid CWE-410.
Architecture and Design
Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended.
OWASP Cheat Sheets
Abuse Case (opens in a new tab)
OWASP ASVS 4.0.3
V8.1.4 (opens in a new tab)
V13.4.1 (opens in a new tab)
V11.1.4 (opens in a new tab)
Attack patterns
XML Ping of the Death (opens in a new tab)
Exponential Data Expansion (opens in a new tab)
Serialized Data Parameter Blowup (opens in a new tab)
Serialized Data with Nested Payloads (opens in a new tab)
Oversized Serialized Data Payloads (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-663Use of a Non-reentrant Function in a Concurrent Context (opens in a new tab)
Base weakness
The product calls a non-reentrant function in a concurrent context in which a competing code sequence (e.g. thread or signal handler) may have an opportunity to call the same function or otherwise influence its state.
Implementation
Use reentrant functions if available.
Implementation
Add synchronization to your non-reentrant function.
Implementation
In Java, use the ReentrantLock Class.
Attack patterns
Leveraging Time-of-Check and Time-of-Use (TOCTOU) Race Conditions (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-639Authorization Bypass Through User-Controlled Key (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #24OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The system's authorization functionality does not prevent one user from gaining access to another user's data or record by modifying the key value identifying the data.
Architecture and Design
For each and every data access, ensure that the user has sufficient privilege to access the record that is being requested.
Architecture and Design · Implementation
Make sure that the key that is used in the lookup of a specific user's record is not controllable externally by the user or that any tampering can be detected.
Architecture and Design
Use encryption in order to make it more difficult to guess other legitimate values of the key or associate a digital signature with the key so that the server can verify that there has been no tampering.
OWASP Cheat Sheets
Access Control (opens in a new tab)
Authorization Testing Automation (opens in a new tab)
Cross-Site Request Forgery Prevention (opens in a new tab)
Insecure Direct Object Reference Prevention (opens in a new tab)
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V4.1.2 (opens in a new tab)
V4.2.1 (opens in a new tab)
V8.3.8 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-183Permissive List of Allowed Inputs (opens in a new tab)
Base weaknessOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The product implements a protection mechanism that relies on a list of inputs (or properties of inputs) that are explicitly allowed by policy because the inputs are assumed to be safe, but the list is too permissive - that is, it allows an input that is unsafe, leading to resultant weaknesses.
OWASP Cheat Sheets
Secure Design Principles (opens in a new tab)
Attack patterns
Double Encoding (opens in a new tab)
Using Leading 'Ghost' Character Sequences to Bypass Input Filters (opens in a new tab)
Exploiting Multiple Input Interpretation Layers (opens in a new tab)
Using Unicode Encoding to Bypass Validation Logic (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-267Privilege Defined With Unsafe Actions (opens in a new tab)
Base weakness
A particular privilege, role, capability, or right can be used to perform unsafe actions that were not intended, even when it is assigned to the correct entity.
Architecture and Design · Operation
Very carefully manage the setting, management, and handling of privileges. Explicitly manage trust zones in the software.
Architecture and Design · Operation · Environment Hardening
Run your code using the lowest privileges that are required to accomplish the necessary tasks. If possible, create isolated accounts with limited privileges that are only used for a single task. That way, a successful attack will not immediately give the attacker access to the rest of the software or its environment.
OWASP Cheat Sheets
Docker Security (opens in a new tab)
Third Party Javascript Management (opens in a new tab)
Virtual Patching (opens in a new tab)
OWASP ASVS 4.0.3
V1.4.4 (opens in a new tab)
V1.4.5 (opens in a new tab)
V1.10.1 (opens in a new tab)
Attack patterns
Restful Privilege Elevation (opens in a new tab)
Probe Audio and Video Peripherals (opens in a new tab)
Collect Data from Clipboard (opens in a new tab)
Identify Shared Files/Directories on System (opens in a new tab)
Collect Data from Screen Capture (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-89Improper Neutralization of Special Elements used in an SQL Command (SQL Injection) (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #2OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product constructs all or part of an SQL command using externally-influenced input from an upstream component, but it does not neutralize or incorrectly neutralizes special elements that could modify the intended SQL command when it is sent to a downstream component. Without sufficient removal or quoting of SQL syntax in user-controllable inputs, the generated SQL query can cause those inputs to be interpreted as SQL instead of ordinary user data.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design · Parameterization
If available, use structured mechanisms that automatically enforce the separation between data and code. These mechanisms may be able to provide the relevant quoting, encoding, and validation automatically, instead of relying on the developer to provide this capability at every point where output is generated.
Architecture and Design · Operation · Environment Hardening
Run your code using the lowest privileges that are required to accomplish the necessary tasks. If possible, create isolated accounts with limited privileges that are only used for a single task. That way, a successful attack will not immediately give the attacker access to the rest of the software or its environment.
OWASP Cheat Sheets
Query Parameterization (opens in a new tab)
Unvalidated Redirects and Forwards (opens in a new tab)
XML Security (opens in a new tab)
XML External Entity Prevention (opens in a new tab)
File Upload (opens in a new tab)
OWASP ASVS 4.0.3
V5.3.4 (opens in a new tab)
V5.3.5 (opens in a new tab)
V1.5.1 (opens in a new tab)
Attack patterns
Command Line Execution through SQL Injection (opens in a new tab)
Object Relational Mapping Injection (opens in a new tab)
SQL Injection through SOAP Parameter Tampering (opens in a new tab)
Expanding Control over the Operating System from the Database (opens in a new tab)
SQL Injection (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-272Least Privilege Violation (opens in a new tab)
Base weakness
The elevated privilege level required to perform operations such as chroot() should be dropped immediately after the operation is performed.
Architecture and Design · Operation
Very carefully manage the setting, management, and handling of privileges. Explicitly manage trust zones in the software.
Architecture and Design · Separation of Privilege
Follow the principle of least privilege when assigning access rights to entities in a software system.
Architecture and Design · Separation of Privilege
Compartmentalize the system to have "safe" areas where trust boundaries can be unambiguously drawn. Do not allow sensitive data to go outside of the trust boundary and always be careful when interfacing with a compartment outside of the safe area.
OWASP Cheat Sheets
Docker Security (opens in a new tab)
OWASP ASVS 4.0.3
V10.2.2 (opens in a new tab)
V1.4.4 (opens in a new tab)
V1.4.5 (opens in a new tab)
Attack patterns
Using Malicious Files (opens in a new tab)
Leverage Executable Code in Non-Executable Files (opens in a new tab)
Manipulating Web Input to File System Calls (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Affected software

Description

AI analysisMachine-generated, updated 5 Nov 2026, 21:05 UTC

WeaknessesCWE-1220, CWE-770, CWE-663 +5

Technical details

References

Community reviews

Related threats