CVE-2026-17615VulnerabilityPublished 4 Nov 2026

Red Hat Security Advisory: Red Hat JBoss Enterprise Application Platform 8.1.9 XP 6.0.7.GA release

Affects Red HatSource GCVE Database

Compare

Mentioned vulnerabilities

Authoritative record:CVE-2026-17615· High 7.5

Not known to be exploited · CVSS 7.5 High.

Data as of 4 Nov 2026, 15:29 UTC

CVSS 3.1 base score

7.5High

How severe the flaw is on the 0–10 CVSS scale.

Thin evidence

One scorer or none

CVSS scores by source
CNA (redhat)	CVSS 3.1	7.5

CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N

Attack Vector: Network
Attack Complexity: Low
Privileges Required: None
User Interaction: None
Scope: Unchanged
Confidentiality: High
Integrity: None
Availability: None

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable component is bound to the network stack and the set of possible attackers extends beyond the other options listed, up to and including the entire Internet. Such a vulnerability is often termed 'remotely exploitable' and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: Low: Specialized access conditions or extenuating circumstances do not exist. An attacker can expect repeatable success against the vulnerable component.
Privileges Required: None: The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files to carry out an attack.
User Interaction: None: The vulnerable system can be exploited without any interaction from any user.
Scope: Unchanged: An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
Confidentiality: High: There is total loss of confidentiality, resulting in all resources within the impacted component being divulged to the attacker. Alternatively, access to only some restricted information is obtained, but the disclosed information presents a direct, serious impact.
Integrity: None: There is no loss of integrity within the impacted component.
Availability: None: There is no impact to availability within the impacted component.

Definitions: FIRST CVSS v3.1 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 31 Aug 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponized: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 4 Nov 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponized: A Metasploit exploit module or Exploit-DB entry exists (Metasploit scanner modules do not count), or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

Affected software

Product	Affected	Fixed in
Red Hat Build of Apache Camel 3.33.3.SP1org.jboss.resteasy/resteasy-core	Affected–	Fixed in–
Red Hat build of Keycloak 26.6rhbk/keycloak-operator-bundle	Affected–	Fixed in–
Red Hat build of Keycloak 26.6rhbk/keycloak-rhel9	Affected–	Fixed in–
Red Hat build of Keycloak 26.6rhbk/keycloak-rhel9-operator	Affected–	Fixed in–
Red Hat build of Keycloak 26.6.7keycloak/rhbk-rhel9-operator	Affected–	Fixed in–
Red Hat build of Keycloak 26.6.7resteasy-core	Affected–	Fixed in–

Description

This is a cumulative patch release zip for the JBoss EAP XP 6.0.7 runtime distribution for use with EAP 8.1.9 Security Fix(es): * netty-codec-http2: Netty: HTTP/2 header field values are not validated by default (CR/LF/NUL passthrough) [eapxp-6] (CVE-2026-93579) * netty-codec-http2: HTTP/1 absolute-form Host mismatch is translated to HTTP/2 :authority, overriding the request-target authority [eapxp-6] (CVE-2026-93569) * netty-codec-http2: Netty: HTTP/2 and HTTP/3 Extended CONNECT requests are downgraded as regular CONNECT requests [eapxp-6] (CVE-2026-93568) * netty-codec-http2: HTTP/1 authority-form CONNECT is translated to malformed HTTP/2 CONNECT with Host-controlled :authority [eapxp-6] (CVE-2026-93567) * netty-codec-http2: Netty: HTTP/2 HpackEncoder DoS with large table size [eapxp-6] (CVE-2026-93492) * netty-codec-http2: Netty: Information disclosure via CORS Vary header overwrite [eapxp-6] (CVE-2026-59903) * netty-buffer: Netty: Information disclosure via CORS Vary header overwrite [eapxp-6] (CVE-2026-59903) * parent: Apache ZooKeeper: Operational log forgery via newline injection [eapxp-6] (CVE-2026-84501) * zookeeper: Apache ZooKeeper: Operational log forgery via newline injection [eapxp-6] (CVE-2026-84501) * parent: Apache ZooKeeper: Improper certificate validation in FIPS mode allows quorum compromise [eapxp-6] (CVE-2026-59969) * zookeeper: Apache ZooKeeper: Improper certificate validation in FIPS mode allows quorum compromise [eapxp-6] (CVE-2026-59969) * resteasy-core: RESTEasy: CorsFilter Reflects Arbitrary Origin with Credentials under Wildcard Config [eapxp-6] (CVE-2026-89058) * resteasy-core: RESTEasy: IIOImageProvider Unbounded Image Decode (Decompression-Bomb DoS) [eapxp-6] (CVE-2026-89059) * zstd-jni: luben zstd-jni: Remote use-after-free vulnerability in dictionary sharing [eapxp-6] (CVE-2026-90852) * zstd-jni: zstd-jni: Denial of Service via out-of-bounds read in ZstdDictDecompress [eapxp-6] (CVE-2026-90560) * jackson-databind: jackson-databind: CPU Denial of Service via unbounded numeric parsing [eapxp-6] (CVE-2026-68497) * zstd-jni: zstd-jni: Information disclosure or denial of service via out-of-bounds read [eapxp-6] (CVE-2026-89046) * zstd-jni: zstd-jni: Denial of Service (DoS) via out-of-bounds read in Zstd.trainFromBufferDirect [eapxp-6] (CVE-2026-87824) * zstd-jni: zstd-jni: Out-of-bounds read in ZstdDictCompress constructor leads to denial of service [eapxp-6] (CVE-2026-87795) * zstd-jni: zstd-jni: Use-After-Free vulnerability allows memory corruption and denial of service [eapxp-6] (CVE-2026-87877) * zstd-jni: zstd-jni: Data corruption or denial of service via use-after-free vulnerability [eapxp-6] (CVE-2026-87825) * micrometer-core: Micrometer: Line-protocol and log injection via unsanitized input allows metric and log spoofing [eapxp-6] (CVE-2026-59296) * proton-j: Apache Qpid Proton-J: Denial of Service via unbounded symbol value caching [eapxp-6] (CVE-2026-66257) * proton-j: Apache Qpid Proton-J: Denial of Service due to excessive allocation [eapxp-6] (CVE-2026-66273) * resteasy-core: RESTeasy SourceProvider remote unauthenticated file read [eapxp-6] (CVE-2026-17615) * proton-j: Apache Qpid Proton-J: Denial of Service via unbounded type nesting [eapxp-6] (CVE-2026-66274)

CWE-611Improper Restriction of XML External Entity Reference (opens in a new tab)
Base weaknessOWASP Top 10 A02:2025: Security Misconfiguration (opens in a new tab)
The product processes an XML document that can contain XML entities with URIs that resolve to documents outside of the intended sphere of control, causing the product to embed incorrect documents into its output.
Implementation · System Configuration
Many XML parsers and validators can be configured to disable external entity expansion.
OWASP Cheat Sheets
Deserialization (opens in a new tab)
XML Security (opens in a new tab)
XML External Entity Prevention (opens in a new tab)
OWASP ASVS 4.0.3
V5.5.2 (opens in a new tab)
Attack patterns
Data Serialization External Entities Blowup (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-93Improper Neutralization of CRLF Sequences (CRLF Injection) (opens in a new tab)
Base weaknessOWASP Top 10 A05:2025: Injection (opens in a new tab)
The product uses CRLF (carriage return line feeds) as a special element, e.g. to separate lines or records, but it does not neutralize or incorrectly neutralizes CRLF sequences from inputs.
Implementation
Avoid using CRLF as a special sequence.
Implementation
Appropriately filter or quote CRLF sequences in user-controlled input.
OWASP Cheat Sheets
Abuse Case (opens in a new tab)
Deserialization (opens in a new tab)
Injection Prevention (opens in a new tab)
SQL Injection Prevention (opens in a new tab)
Injection Prevention in Java (opens in a new tab)
OWASP ASVS 4.0.3
V1.5.1 (opens in a new tab)
Attack patterns
Command Delimiters (opens in a new tab)
Web Server Logs Tampering (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-444Inconsistent Interpretation of HTTP Requests (HTTP Request Smuggling) (opens in a new tab)
Base weaknessOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The product acts as an intermediary HTTP agent (such as a proxy or firewall) in the data flow between two entities such as a client and server, but it does not interpret malformed HTTP requests or responses in ways that are consistent with how the messages will be processed by those entities that are at the ultimate destination.
Implementation
Use a web server that employs a strict HTTP parsing procedure, such as Apache.
Implementation
Use only SSL communication.
Implementation
Terminate the client session after each request.
OWASP Cheat Sheets
REST Assessment (opens in a new tab)
REST Security (opens in a new tab)
Cross-Site Request Forgery Prevention (opens in a new tab)
Secure Design Principles (opens in a new tab)
OWASP ASVS 4.0.3
V13.2.5 (opens in a new tab)
Attack patterns
HTTP Response Smuggling (opens in a new tab)
HTTP Request Smuggling (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-295Improper Certificate Validation (opens in a new tab)
Base weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
The product does not validate, or incorrectly validates, a certificate.
Architecture and Design · Implementation
Certificates should be carefully managed and checked to assure that data are encrypted with the intended owner's public key.
Implementation
If certificate pinning is being used, ensure that all relevant properties of the certificate are fully validated before the certificate is pinned, including the hostname.
OWASP Cheat Sheets
Transport Layer Protection (opens in a new tab)
TLS Cipher String (opens in a new tab)
OWASP Authentication (opens in a new tab)
OWASP ASVS 4.0.3
V9.2.1 (opens in a new tab)
V1.9.2 (opens in a new tab)
V2.8.5 (opens in a new tab)
Attack patterns
Creating a Rogue Certification Authority Certificate (opens in a new tab)
Signature Spoofing by Improper Validation (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-770Allocation of Resources Without Limits or Throttling (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #25
The product allocates a reusable resource or group of resources on behalf of an actor without imposing any intended restrictions on the size or number of resources that can be allocated.
Requirements
Clearly specify the minimum and maximum expectations for capabilities, and dictate which behaviors are acceptable when resource allocation reaches limits.
Architecture and Design
Limit the amount of resources that are accessible to unprivileged users. Set per-user limits for resources. Allow the system administrator to define these limits. Be careful to avoid CWE-410.
Architecture and Design
Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended.
OWASP Cheat Sheets
Abuse Case (opens in a new tab)
OWASP ASVS 4.0.3
V8.1.4 (opens in a new tab)
V13.4.1 (opens in a new tab)
V11.1.4 (opens in a new tab)
Attack patterns
XML Ping of the Death (opens in a new tab)
Exponential Data Expansion (opens in a new tab)
Serialized Data Parameter Blowup (opens in a new tab)
Serialized Data with Nested Payloads (opens in a new tab)
Oversized Serialized Data Payloads (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-400Uncontrolled Resource Consumption (opens in a new tab)
Class weaknessLikelihood of exploit: High
The product does not properly control the allocation and maintenance of a limited resource.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
Architecture and Design
Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended. A strong authentication and access control model will help prevent such attacks from occurring in the first place.
Architecture and Design
Mitigation of resource exhaustion attacks requires that the target system either: recognizes the attack and denies that user further access for a given amount of time, or; uniformly throttles all requests in order to make it more difficult to consume resources more quickly than they can again be freed.
Architecture and Design
Ensure that protocols have specific limits of scale placed on them.
OWASP Cheat Sheets
File Upload (opens in a new tab)
OWASP ASVS 4.0.3
V12.1.1 (opens in a new tab)
Attack patterns
XML Ping of the Death (opens in a new tab)
Regular Expression Exponential Blowup (opens in a new tab)
Sustained Client Engagement (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-117Improper Output Neutralization for Logs (opens in a new tab)
Base weaknessLikelihood of exploit: MediumOWASP Top 10 A09:2025: Security Logging & Alerting Failures (opens in a new tab)
The product constructs a log message from external input, but it does not neutralize or incorrectly neutralizes special elements when the message is written to a log file.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Implementation · Output Encoding
Use and specify an output encoding that can be handled by the downstream component that is reading the output. Common encodings include ISO-8859-1, UTF-7, and UTF-8.
Implementation · Input Validation
Inputs should be decoded and canonicalized to the application's current internal representation before being validated (CWE-180). Make sure that the application does not decode the same input twice (CWE-174).
OWASP Cheat Sheets
Logging (opens in a new tab)
Content Security Policy (opens in a new tab)
Application Logging Vocabulary (opens in a new tab)
OWASP ASVS 4.0.3
V7.3.1 (opens in a new tab)
V14.4.6 (opens in a new tab)
V14.4.4 (opens in a new tab)
Attack patterns
Audit Log Manipulation (opens in a new tab)
Web Server Logs Tampering (opens in a new tab)
Log Injection-Tampering-Forging (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-125Out-of-bounds Read (opens in a new tab)
Base weaknessCWE Top 25 (2025): #8
The product reads data past the end, or before the beginning, of the intended buffer.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Architecture and Design · Language Selection
Use a language that provides appropriate memory abstractions.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
Attack patterns
Overread Buffers (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-825Expired Pointer Dereference (opens in a new tab)
Base weakness
The product dereferences a pointer that contains a location for memory that was previously valid, but is no longer valid.
Architecture and Design
Choose a language that provides automatic memory management.
Implementation
When freeing pointers, be sure to set them to NULL once they are freed. However, the utilization of multiple or complex data structures may lower the usefulness of this strategy.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-416Use After Free (opens in a new tab)
Variant weaknessLikelihood of exploit: HighCWE Top 25 (2025): #7
The product reuses or references memory after it has been freed. At some point afterward, the memory may be allocated again and saved in another pointer, while the original pointer references a location somewhere within the new allocation. Any operations using the original pointer are no longer valid because the memory "belongs" to the code that operates on the new pointer.
Architecture and Design · Language Selection
Choose a language that provides automatic memory management.
Implementation · Attack Surface Reduction
When freeing pointers, be sure to set them to NULL once they are freed. However, the utilization of multiple or complex data structures may lower the usefulness of this strategy.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-346Origin Validation Error (opens in a new tab)
Class weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
The product does not properly verify that the source of data or communication is valid.
OWASP Cheat Sheets
OWASP Authentication (opens in a new tab)
OWASP ASVS 4.0.3
V14.5.2 (opens in a new tab)
V14.5.3 (opens in a new tab)
V1.4.4 (opens in a new tab)
Attack patterns
JSON Hijacking (aka JavaScript Hijacking) (opens in a new tab)
Cache Poisoning (opens in a new tab)
DNS Cache Poisoning (opens in a new tab)
Exploit Script-Based APIs (opens in a new tab)
Application API Message Manipulation via Man-in-the-Middle (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-409Improper Handling of Highly Compressed Data (Data Amplification) (opens in a new tab)
Base weakness
The product does not handle or incorrectly handles a compressed input with a very high compression ratio that produces a large output.
OWASP Cheat Sheets
File Upload (opens in a new tab)
OWASP ASVS 4.0.3
V12.1.2 (opens in a new tab)
V12.1.1 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-1035OWASP Top Ten 2017 Category A9 - Using Components with Known Vulnerabilities (opens in a new tab)
CategoryOWASP Top 10 A03:2025: Software Supply Chain Failures (opens in a new tab)
Weaknesses in this category are related to the A9 category in the OWASP Top Ten 2017.
MITRE does not allow mapping vulnerabilities to this entry; it groups weaknesses rather than naming one.
OWASP Cheat Sheets
OWASP Cheat Sheet Series: Dependency Graph SBOM (opens in a new tab)
OWASP Cheat Sheet Series: Vulnerable Dependency Management (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-20Improper Input Validation (opens in a new tab)
Class weaknessLikelihood of exploit: HighCWE Top 25 (2025): #18OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product receives input or data, but it does not validate or incorrectly validates that the input has the properties that are required to process the data safely and correctly.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
Architecture and Design · Attack Surface Reduction
Consider using language-theoretic security (LangSec) techniques that characterize inputs using a formal language and build "recognizers" for that language. This effectively requires parsing to be a distinct layer that effectively enforces a boundary between raw input and internal data representations, instead of…
Architecture and Design · Libraries or Frameworks
Use an input validation framework such as Struts or the OWASP ESAPI Validation API. Note that using a framework does not automatically address all input validation problems; be mindful of weaknesses that could arise from misusing the framework itself (CWE-1173).
Architecture and Design · Implementation · Attack Surface Reduction
Understand all the potential areas where untrusted inputs can enter the product, including but not limited to: parameters or arguments, cookies, anything read from the network, environment variables, reverse DNS lookups, query results, request headers, URL components, e-mail, files, filenames, databases, and any…
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
Injection Prevention (opens in a new tab)
SQL Injection Prevention (opens in a new tab)
Injection Prevention in Java (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
Attack patterns
Buffer Overflow via Environment Variables (opens in a new tab)
Server Side Include (SSI) Injection (opens in a new tab)
Cross Zone Scripting (opens in a new tab)
Command Line Execution through SQL Injection (opens in a new tab)
Object Relational Mapping Injection (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

GCVE source: db.gcve.eu
Csaf Category: csaf_security_advisory
Csaf Version: 2.0
Publisher: Red Hat Product Security
Advisory ID: RHSA-2026:95221
Vendor Severity: high
CVE Count: 23
Additional Cves: CVE-2026-59296, CVE-2026-59903, CVE-2026-59969, CVE-2026-66257, CVE-2026-66273, CVE-2026-66274, CVE-2026-68497, CVE-2026-84501, CVE-2026-87795, CVE-2026-87824, CVE-2026-87825, CVE-2026-87877, CVE-2026-89046, CVE-2026-89058, CVE-2026-89059, CVE-2026-90560, CVE-2026-90852, CVE-2026-93492, CVE-2026-93567, CVE-2026-93568, CVE-2026-93569, CVE-2026-93579

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Affected software

Description

WeaknessesCWE-611, CWE-93, CWE-444 +11

Technical details

References

Community reviews

Related threats