CVE-2026-27145VulnerabilityPublished 3 Aug 2026Updated 26 Oct 2026

Red Hat Security Advisory: Red Hat OpenShift Service Mesh 3.2.8

Affects Red HatSource GCVE Database

Mentioned vulnerabilities

Authoritative record:CVE-2026-27145· Medium 6.5

Not known to be exploited · CVSS 6.5 Medium : upgrade Red Hat x509 to 1.26.4 or 1.25.11 when convenient.

Data as of 26 Oct 2026, 17:16 UTC

CVSS 3.1 base score

6.5Medium

How severe the flaw is on the 0–10 CVSS scale.

EPSS: 0.5% chance of exploitation in 30 days – higher than 47% of CVEsExploit Prediction Scoring System: the likelihood attackers will use this flaw soon.
Patch: Available – fixed in 1.26.4, 1.25.11

CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:H

Attack Vector: Network
Attack Complexity: High
Privileges Required: None
User Interaction: None
Scope: Unchanged
Confidentiality: None
Integrity: Low
Availability: High

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable component is bound to the network stack and the set of possible attackers extends beyond the other options listed, up to and including the entire Internet. Such a vulnerability is often termed 'remotely exploitable' and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: High: A successful attack depends on conditions beyond the attacker's control. That is, a successful attack cannot be accomplished at will, but requires the attacker to invest in some measurable amount of effort in preparation or execution against the vulnerable component before a successful attack can be expected. For example, a successful attack may require an attacker to: gather knowledge about the environment in which the vulnerable target/component exists; prepare the target environment to improve exploit reliability; or inject themselves into the logical network path between the target and the resource requested by the victim in order to read and/or modify network communications (e.g., a man in the middle attack).
Privileges Required: None: The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files to carry out an attack.
User Interaction: None: The vulnerable system can be exploited without any interaction from any user.
Scope: Unchanged: An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
Confidentiality: None: There is no loss of confidentiality within the impacted component.
Integrity: Low: Modification of data is possible, but the attacker does not have control over the consequence of a modification, or the amount of modification is limited. The data modification does not have a direct, serious impact on the impacted component.
Availability: High: There is total loss of availability, resulting in the attacker being able to fully deny access to resources in the impacted component; this loss is either sustained (while the attacker continues to deliver the attack) or persistent (the condition persists even after the attack has completed). Alternatively, the attacker has the ability to deny some availability, but the loss of availability presents a direct, serious consequence to the impacted component (e.g., the attacker cannot disrupt existing connections, but can prevent new connections; the attacker can repeatedly exploit a vulnerability that, in each instance of a successful attack, leaks a only small amount of memory, but after repeated exploitation causes a service to become completely unavailable).

Definitions: FIRST CVSS v3.1 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 2 Jun 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponised: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 26 Oct 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponised: Public exploit code exists in Metasploit or Exploit-DB, or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

Upgrade crypto/x509 to 1.26.4 or 1.25.11.

Affected software

Product	Affected	Fixed in
Go standard librarycrypto/x509	Affected >=1.26.0-0 <1.26.4	Fixed in 1.26.4
Go standard librarycrypto/x509	Affected <1.25.11	Fixed in 1.25.11
Gocrypto/x509`pkg:golang/crypto/x509`Other threats	Affected <1.25.11 >=1.26.0-0 <1.26.4	Fixed in 1.25.11 1.26.4

Check your own hosts for these packages with threat-finder (opens in a new tab), our free open-source scanner.

Description

Red Hat OpenShift Service Mesh 3.2.8, which is based on the open source Istio project, addresses a variety of problems in a microservice architecture by creating a centralized point of control in an application. Security Fix(es): * CVE-2026-27145 openshift-service-mesh/istio-proxyv2-rhel9: golang crypto/x509: Denial of Service via excessive processing of DNS SAN entries (OSSM-14634) * CVE-2026-27145 openshift-service-mesh/istio-pilot-rhel9: golang crypto/x509: Denial of Service via excessive processing of DNS SAN entries (OSSM-14634) * CVE-2026-27145 openshift-service-mesh/istio-cni-rhel9: golang crypto/x509: Denial of Service via excessive processing of DNS SAN entries (OSSM-14634) * CVE-2026-27145 openshift-service-mesh/istio-rhel9-operator: golang crypto/x509: Denial of Service via excessive processing of DNS SAN entries (OSSM-14634) * CVE-2026-48706 openshift-service-mesh/istio-proxyv2-rhel9: Envoy Heap Buffer Overflow in TcpStatsdSink (OSSM-14832) * CVE-2026-47204 openshift-service-mesh/istio-proxyv2-rhel9: Envoy: Denial of Service via Connect protocol request (OSSM-14835) * CVE-2026-48743 openshift-service-mesh/istio-proxyv2-rhel9: Envoy: Request desynchronization allows security policy bypass via HTTP/3 to HTTP/1 translation (OSSM-14840) * CVE-2026-48042 openshift-service-mesh/istio-proxyv2-rhel9: Envoy: Denial of Service via deeply nested JSON objects (OSSM-14846) * CVE-2026-48044 openshift-service-mesh/istio-proxyv2-rhel9: Envoy: Denial of Service via specially crafted zstd payload (OSSM-14850) * CVE-2026-47221 openshift-service-mesh/istio-proxyv2-rhel9: Envoy: Null pointer deref in internal redirects (OSSM-14853)

CWE-606Unchecked Input for Loop Condition (opens in a new tab)
Base weakness
The product does not properly check inputs that are used for loop conditions, potentially leading to a denial of service or other consequences because of excessive looping.
Implementation
Do not use user-controlled data for loop conditions.
Implementation
Perform input validation.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-476NULL Pointer Dereference (opens in a new tab)
Base weaknessLikelihood of exploit: MediumCWE Top 25 (2025): #13OWASP Top 10 A10:2025: Mishandling of Exceptional Conditions (opens in a new tab)
The product dereferences a pointer that it expects to be valid but is NULL.
Implementation
For any pointers that could have been modified or provided from a function that can return NULL, check the pointer for NULL before use. When working with a multithreaded or otherwise asynchronous environment, ensure that proper locking APIs are used to lock before the check, and unlock when it has finished.
Requirements
Select a programming language that is not susceptible to these issues.
Implementation
Check the results of all functions that return a value and verify that the value is non-null before acting upon it.
OWASP Cheat Sheets
Logging (opens in a new tab)
Error Handling (opens in a new tab)
OWASP ASVS 4.0.3
V11.1.7 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-776Improper Restriction of Recursive Entity References in DTDs ('XML Entity Expansion') (opens in a new tab)
Base weaknessLikelihood of exploit: MediumOWASP Top 10 A02:2025: Security Misconfiguration (opens in a new tab)
The product uses XML documents and allows their structure to be defined with a Document Type Definition (DTD), but it does not properly control the number of recursive definitions of entities.
Operation
If possible, prohibit the use of DTDs or use an XML parser that limits the expansion of recursive DTD entities.
Implementation
Before parsing XML files with associated DTDs, scan for recursive entity declarations and do not continue parsing potentially explosive content.
OWASP Cheat Sheets
File Upload (opens in a new tab)
OWASP ASVS 4.0.3
V12.1.1 (opens in a new tab)
Attack patterns
Exponential Data Expansion (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-770Allocation of Resources Without Limits or Throttling (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #25
The product allocates a reusable resource or group of resources on behalf of an actor without imposing any intended restrictions on the size or number of resources that can be allocated.
Requirements
Clearly specify the minimum and maximum expectations for capabilities, and dictate which behaviors are acceptable when resource allocation reaches limits.
Architecture and Design
Limit the amount of resources that are accessible to unprivileged users. Set per-user limits for resources. Allow the system administrator to define these limits. Be careful to avoid CWE-410.
Architecture and Design
Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended.
OWASP Cheat Sheets
Abuse Case (opens in a new tab)
OWASP ASVS 4.0.3
V8.1.4 (opens in a new tab)
V13.4.1 (opens in a new tab)
V11.1.4 (opens in a new tab)
Attack patterns
XML Ping of the Death (opens in a new tab)
Exponential Data Expansion (opens in a new tab)
Serialized Data Parameter Blowup (opens in a new tab)
Serialized Data with Nested Payloads (opens in a new tab)
Oversized Serialized Data Payloads (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-787Out-of-bounds Write (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #5
The product writes data past the end, or before the beginning, of the intended buffer.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Operation · Build and Compilation · Environment Hardening
Use automatic buffer overflow detection mechanisms that are offered by certain compilers or compiler extensions. Examples include: the Microsoft Visual Studio /GS flag, Fedora/Red Hat FORTIFY_SOURCE GCC flag, StackGuard, and ProPolice, which provide various mechanisms including canary-based detection and range/index…
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-444Inconsistent Interpretation of HTTP Requests ('HTTP Request/Response Smuggling') (opens in a new tab)
Base weaknessOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The product acts as an intermediary HTTP agent (such as a proxy or firewall) in the data flow between two entities such as a client and server, but it does not interpret malformed HTTP requests or responses in ways that are consistent with how the messages will be processed by those entities that are at the ultimate destination.
Implementation
Use a web server that employs a strict HTTP parsing procedure, such as Apache.
Implementation
Use only SSL communication.
Implementation
Terminate the client session after each request.
OWASP Cheat Sheets
REST Assessment (opens in a new tab)
REST Security (opens in a new tab)
Cross-Site Request Forgery Prevention (opens in a new tab)
Secure Design Principles (opens in a new tab)
OWASP ASVS 4.0.3
V13.2.5 (opens in a new tab)
Attack patterns
HTTP Response Smuggling (opens in a new tab)
HTTP Request Smuggling (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Affected software

Description

WeaknessesCWE-606, CWE-476, CWE-776 +3

Technical details

References

Community reviews

Related threats