CVE-2026-1933VulnerabilityPublished 10 Jun 2026Updated 30 Oct 2026

Red Hat Security Advisory: samba security update

Affects Red Hat sambaSource GCVE Database

Compare

Mentioned vulnerabilities

Authoritative record:CVE-2026-1933· High 7.1

Not known to be exploited · CVSS 7.1 High.

Data as of 31 Oct 2026, 00:06 UTC

CVSS 3.1 base score

7.1High

How severe the flaw is on the 0–10 CVSS scale.

Sources agree

CVSS scores by source
CNA (redhat)	CVSS 3.1	7.1
ADP (redhat-SADP)	CVSS 3.1	7.1

CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:H

Attack Vector: Network
Attack Complexity: Low
Privileges Required: Low
User Interaction: None
Scope: Unchanged
Confidentiality: None
Integrity: Low
Availability: High

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable component is bound to the network stack and the set of possible attackers extends beyond the other options listed, up to and including the entire Internet. Such a vulnerability is often termed 'remotely exploitable' and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: Low: Specialized access conditions or extenuating circumstances do not exist. An attacker can expect repeatable success against the vulnerable component.
Privileges Required: Low: The attacker is authorized with (i.e., requires) privileges that provide basic user capabilities that could normally affect only settings and files owned by a user. Alternatively, an attacker with Low privileges may have the ability to cause an impact only to non-sensitive resources.
User Interaction: None: The vulnerable system can be exploited without any interaction from any user.
Scope: Unchanged: An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
Confidentiality: None: There is no loss of confidentiality within the impacted component.
Integrity: Low: Modification of data is possible, but the attacker does not have control over the consequence of a modification, or the amount of modification is limited. The data modification does not have a direct, serious impact on the impacted component.
Availability: High: There is total loss of availability, resulting in the attacker being able to fully deny access to resources in the impacted component; this loss is either sustained (while the attacker continues to deliver the attack) or persistent (the condition persists even after the attack has completed). Alternatively, the attacker has the ability to deny some availability, but the loss of availability presents a direct, serious consequence to the impacted component (e.g., the attacker cannot disrupt existing connections, but can prevent new connections; the attacker can repeatedly exploit a vulnerability that, in each instance of a successful attack, leaks a only small amount of memory, but after repeated exploitation causes a service to become completely unavailable).

Definitions: FIRST CVSS v3.1 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 27 May 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponized: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 30 Oct 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponized: A Metasploit exploit module or Exploit-DB entry exists (Metasploit scanner modules do not count), or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

Affected software

Product	Affected	Fixed in
Red Hatredhat/samba`pkg:rpm/redhat/samba`Other threats	Affected =9.0.0 <=9.8 >=10.0.0	Fixed in–

Check your own hosts for these packages with threat-finder (opens in a new tab), our free open-source scanner.

AI-suggested

Red Hat has released security updates for Samba and related components in Red Hat Enterprise Linux 9 to address these vulnerabilities. Users should apply the updates as described in Red Hat advisory RHSA-2026:25049 and the referenced article https://access.redhat.com/articles/11258. No additional mitigation steps are indicated beyond applying the official patches.

Description

Red Hat has issued a critical security advisory for Samba, addressing multiple vulnerabilities including missing access checks on reparse point operations, failure of vfs_worm to block directory modifications, insecure group policy certificate enrollment, remote code execution in the printing subsystem and SAMR, and a denial of service in ngtcp2 during QUIC handshake. These vulnerabilities affect Red Hat Enterprise Linux 9 and related variants. The advisory includes fixes for these issues and recommends applying the updates provided by Red Hat.

CWE-284Improper Access Control (opens in a new tab)
Pillar weaknessCWE Top 25 (2025): #19OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product does not restrict or incorrectly restricts access to a resource from an unauthorized actor.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
Architecture and Design · Operation
Very carefully manage the setting, management, and handling of privileges. Explicitly manage trust zones in the software.
Architecture and Design · Separation of Privilege
Compartmentalize the system to have "safe" areas where trust boundaries can be unambiguously drawn. Do not allow sensitive data to go outside of the trust boundary and always be careful when interfacing with a compartment outside of the safe area.
OWASP Cheat Sheets
Docker Security (opens in a new tab)
Third Party Javascript Management (opens in a new tab)
Virtual Patching (opens in a new tab)
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V1.4.4 (opens in a new tab)
V1.4.5 (opens in a new tab)
V1.10.1 (opens in a new tab)
Attack patterns
Embedding Scripts within Scripts (opens in a new tab)
Modification of Windows Service Configuration (opens in a new tab)
Malicious Root Certificate (opens in a new tab)
Intent Spoof (opens in a new tab)
WebView Exposure (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-280Improper Handling of Insufficient Permissions or Privileges (opens in a new tab)
Base weaknessOWASP Top 10 A10:2025: Mishandling of Exceptional Conditions (opens in a new tab)
The product does not handle or incorrectly handles when it has insufficient privileges to access resources or functionality as specified by their permissions. This may cause it to follow unexpected code paths that may leave the product in an invalid state.
Architecture and Design · Separation of Privilege
Compartmentalize the system to have "safe" areas where trust boundaries can be unambiguously drawn. Do not allow sensitive data to go outside of the trust boundary and always be careful when interfacing with a compartment outside of the safe area.
Implementation
Always check to see if you have successfully accessed a resource or system functionality, and use proper error handling if it is unsuccessful. Do this even when you are operating in a highly privileged mode, because errors or environmental conditions might still cause a failure.
OWASP Cheat Sheets
Logging (opens in a new tab)
Error Handling (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-345Insufficient Verification of Data Authenticity (opens in a new tab)
Class weaknessOWASP Top 10 A08:2025: Software or Data Integrity Failures (opens in a new tab)
The product does not sufficiently verify the origin or authenticity of data, in a way that causes it to accept invalid data.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
OWASP Cheat Sheets
XML Security (opens in a new tab)
REST Security (opens in a new tab)
JSON Web Token for Java (opens in a new tab)
REST Assessment (opens in a new tab)
Cross-Site Request Forgery Prevention (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.2 (opens in a new tab)
V3.5.3 (opens in a new tab)
V13.2.6 (opens in a new tab)
Attack patterns
JSON Hijacking (aka JavaScript Hijacking) (opens in a new tab)
Cache Poisoning (opens in a new tab)
DNS Cache Poisoning (opens in a new tab)
Spoofing of UDDI/ebXML Messages (opens in a new tab)
Application API Message Manipulation via Man-in-the-Middle (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-78Improper Neutralization of Special Elements used in an OS Command (OS Command Injection) (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #9OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product constructs all or part of an OS command using externally-influenced input from an upstream component, but it does not neutralize or incorrectly neutralizes special elements that could modify the intended OS command before it is sent to a downstream component.
Architecture and Design
If at all possible, use library calls rather than external processes to recreate the desired functionality.
Architecture and Design · Operation · Sandbox or Jail
Run the code in a "jail" or similar sandbox environment that enforces strict boundaries between the process and the operating system. This may effectively restrict which files can be accessed in a particular directory or which commands can be executed by the software.
Architecture and Design · Attack Surface Reduction
For any data that will be used to generate a command to be executed, keep as much of that data out of external control as possible. For example, in web applications, this may require storing the data locally in the session's state instead of sending it out to the client in a hidden form field.
OWASP Cheat Sheets
Injection Prevention (opens in a new tab)
Injection Prevention in Java (opens in a new tab)
OS Command Injection Defense (opens in a new tab)
Abuse Case (opens in a new tab)
Deserialization (opens in a new tab)
OWASP ASVS 4.0.3
V12.3.5 (opens in a new tab)
V5.3.8 (opens in a new tab)
V1.5.1 (opens in a new tab)
Attack patterns
Command Line Execution through SQL Injection (opens in a new tab)
Command Delimiters (opens in a new tab)
Exploiting Multiple Input Interpretation Layers (opens in a new tab)
Argument Injection (opens in a new tab)
OS Command Injection (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-120Buffer Copy without Checking Size of Input (Classic Buffer Overflow) (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #11
The product copies an input buffer to an output buffer without verifying that the size of the input buffer is less than the size of the output buffer.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Operation · Build and Compilation · Environment Hardening
Use automatic buffer overflow detection mechanisms that are offered by certain compilers or compiler extensions. Examples include: the Microsoft Visual Studio /GS flag, Fedora/Red Hat FORTIFY_SOURCE GCC flag, StackGuard, and ProPolice, which provide various mechanisms including canary-based detection and range/index…
OWASP Cheat Sheets
Docker Security (opens in a new tab)
XML Security (opens in a new tab)
OWASP ASVS 4.0.3
V5.4.1 (opens in a new tab)
V14.1.2 (opens in a new tab)
V13.3.1 (opens in a new tab)
Attack patterns
Buffer Overflow via Environment Variables (opens in a new tab)
Overflow Buffers (opens in a new tab)
Client-side Injection-induced Buffer Overflow (opens in a new tab)
Filter Failure through Buffer Overflow (opens in a new tab)
MIME Conversion (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Affected software

Description

AI analysisMachine-generated, updated 31 Oct 2026, 00:06 UTC

WeaknessesCWE-284, CWE-280, CWE-345 +2

Technical details

References

Community reviews

Related threats