CVE-2026-8090VulnerabilityPublished 16 Jun 2026Updated 6 Nov 2026

Red Hat Security Advisory: thunderbird security update

Affects Red Hat thunderbirdSource GCVE Database

Compare

Mentioned vulnerabilities

Authoritative record:CVE-2026-8090· High 7.3

Not known to be exploited · CVSS 7.3 High.

Data as of 6 Nov 2026, 03:19 UTC

CVSS 3.1 base score

7.3High

How severe the flaw is on the 0–10 CVSS scale.

CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L

Attack Vector: Network
Attack Complexity: Low
Privileges Required: None
User Interaction: None
Scope: Unchanged
Confidentiality: Low
Integrity: Low
Availability: Low

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable component is bound to the network stack and the set of possible attackers extends beyond the other options listed, up to and including the entire Internet. Such a vulnerability is often termed 'remotely exploitable' and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: Low: Specialized access conditions or extenuating circumstances do not exist. An attacker can expect repeatable success against the vulnerable component.
Privileges Required: None: The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files to carry out an attack.
User Interaction: None: The vulnerable system can be exploited without any interaction from any user.
Scope: Unchanged: An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
Confidentiality: Low: There is some loss of confidentiality. Access to some restricted information is obtained, but the attacker does not have control over what information is obtained, or the amount or kind of loss is limited. The information disclosure does not cause a direct, serious loss to the impacted component.
Integrity: Low: Modification of data is possible, but the attacker does not have control over the consequence of a modification, or the amount of modification is limited. The data modification does not have a direct, serious impact on the impacted component.
Availability: Low: Performance is reduced or there are interruptions in resource availability. Even if repeated exploitation of the vulnerability is possible, the attacker does not have the ability to completely deny service to legitimate users. The resources in the impacted component are either partially available all of the time, or fully available only some of the time, but overall there is no direct, serious consequence to the impacted component.

Definitions: FIRST CVSS v3.1 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 7 May 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponized: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 5 Nov 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponized: A Metasploit exploit module or Exploit-DB entry exists (Metasploit scanner modules do not count), or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

Affected software

Product	Affected	Fixed in
Red Hat Product Security Red Hat	Affected <150.0.2 <140.10.2	Fixed in 150.0.2 140.10.2

AI-suggested

A security update for Thunderbird is available from Red Hat for Red Hat Enterprise Linux 9.2 and related variants. Users should apply the update to Thunderbird version 140.11.0-1.el9_2 or later as provided by Red Hat to remediate these vulnerabilities. Detailed update instructions are available in the Red Hat advisory article https://access.redhat.com/articles/11258. No additional mitigation actions are indicated beyond applying the official update.

Description

This Red Hat security advisory addresses multiple vulnerabilities in Mozilla Thunderbird, a standalone mail and newsgroup client. The update fixes a range of issues including sandbox escapes, privilege escalations, memory safety bugs, integer overflows, denial-of-service, information disclosure, spoofing, and same-origin policy bypasses. These vulnerabilities affect various components such as the JavaScript engine, profile backup, networking, audio/video codecs, security sandboxing, DOM bindings, and enterprise policies. The update is rated as important by Red Hat and applies to Red Hat Enterprise Linux 9.2 variants. For detailed impact and CVSS scores, refer to the individual CVE pages linked in the advisory.

Impact

The vulnerabilities collectively could allow attackers to escape sandbox restrictions, escalate privileges, cause denial-of-service, disclose sensitive information, bypass security policies, and spoof content within Thunderbird. These impacts could lead to compromise of user data, execution of unauthorized code, or disruption of service. The advisory rates the overall security impact as Important (high severity). No known exploits in the wild are reported at this time.

Summary

The advisory covers a comprehensive set of security fixes for Mozilla Thunderbird as packaged by Red Hat. It addresses multiple CVEs including CVE-2026-8388, CVE-2026-8391, CVE-2026-8401, CVE-2026-8956, CVE-2026-8975, CVE-2026-8955, CVE-2026-8968, CVE-2026-8954, CVE-2026-8958, CVE-2026-8946, CVE-2026-8970, CVE-2026-8950, CVE-2026-8974, CVE-2026-8953, CVE-2026-8959, CVE-2026-8961, CVE-2026-8947, CVE-2026-8962, and CVE-2026-8957. These vulnerabilities include incorrect boundary conditions, sandbox escapes, integer overflows, memory safety bugs, privilege escalations, denial-of-service, information disclosure, spoofing, use-after-free, mitigation bypass, and same-origin policy bypass in various Thunderbird components. The fixes are included in Thunderbird version 140.11.0-1.el9_2 for Red Hat Enterprise Linux 9.2. The advisory references Red Hat Bugzilla entries for each CVE and provides links to the updated packages.

CWE-825Expired Pointer Dereference (opens in a new tab)
Base weakness
The product dereferences a pointer that contains a location for memory that was previously valid, but is no longer valid.
Architecture and Design
Choose a language that provides automatic memory management.
Implementation
When freeing pointers, be sure to set them to NULL once they are freed. However, the utilization of multiple or complex data structures may lower the usefulness of this strategy.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-787Out-of-bounds Write (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #5
The product writes data past the end, or before the beginning, of the intended buffer.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Operation · Build and Compilation · Environment Hardening
Use automatic buffer overflow detection mechanisms that are offered by certain compilers or compiler extensions. Examples include: the Microsoft Visual Studio /GS flag, Fedora/Red Hat FORTIFY_SOURCE GCC flag, StackGuard, and ProPolice, which provide various mechanisms including canary-based detection and range/index…
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-475Undefined Behavior for Input to API (opens in a new tab)
Base weakness
The behavior of this function is undefined unless its control parameter is set to a specific value.
CWE-653Improper Isolation or Compartmentalization (opens in a new tab)
Class weaknessOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The product does not properly compartmentalize or isolate functionality, processes, or resources that require different privilege levels, rights, or permissions.
Architecture and Design
Break up privileges between different modules, objects, or entities. Minimize the interfaces between modules and require strong access control between them.
OWASP Cheat Sheets
Secure Design Principles (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-190Integer Overflow or Wraparound (opens in a new tab)
Base weaknessLikelihood of exploit: Medium
The product performs a calculation that can produce an integer overflow or wraparound when the logic assumes that the resulting value will always be larger than the original value. This occurs when an integer value is incremented to a value that is too large to store in the associated representation. When this occurs, the value may become a very small or negative number.
Requirements
Ensure that all protocols are strictly defined, such that all out-of-bounds behavior can be identified simply, and require strict conformance to the protocol.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V5.4.3 (opens in a new tab)
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
Attack patterns
Forced Integer Overflow (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-266Incorrect Privilege Assignment (opens in a new tab)
Base weaknessOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
A product incorrectly assigns a privilege to a particular actor, creating an unintended sphere of control for that actor.
Architecture and Design · Operation
Very carefully manage the setting, management, and handling of privileges. Explicitly manage trust zones in the software.
Architecture and Design · Operation · Environment Hardening
Run your code using the lowest privileges that are required to accomplish the necessary tasks. If possible, create isolated accounts with limited privileges that are only used for a single task. That way, a successful attack will not immediately give the attacker access to the rest of the software or its environment.
OWASP Cheat Sheets
Docker Security (opens in a new tab)
Third Party Javascript Management (opens in a new tab)
Virtual Patching (opens in a new tab)
Secure Design Principles (opens in a new tab)
OWASP ASVS 4.0.3
V1.4.4 (opens in a new tab)
V1.4.5 (opens in a new tab)
V1.10.1 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-403Exposure of File Descriptor to Unintended Control Sphere (File Descriptor Leak) (opens in a new tab)
Base weakness
A process does not close sensitive file descriptors before invoking a child process, which allows the child to perform unauthorized I/O operations using those descriptors.
CWE-472External Control of Assumed-Immutable Web Parameter (opens in a new tab)
Base weaknessOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The web application does not sufficiently verify inputs that are assumed to be immutable but are actually externally controllable, such as hidden form fields.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Implementation · Input Validation
Inputs should be decoded and canonicalized to the application's current internal representation before being validated (CWE-180). Make sure that the application does not decode the same input twice (CWE-174).
OWASP Cheat Sheets
Secure Design Principles (opens in a new tab)
Attack patterns
XML Schema Poisoning (opens in a new tab)
Session Credential Falsification through Manipulation (opens in a new tab)
Accessing/Intercepting/Modifying HTTP Cookies (opens in a new tab)
Manipulating Opaque Client-based Data Tokens (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-358Improperly Implemented Security Check for Standard (opens in a new tab)
Base weakness
The product does not implement or incorrectly implements one or more security-relevant checks as specified by the design of a standardized algorithm, protocol, or technique.

GCVE source: db.gcve.eu
Csaf Category: csaf_security_advisory
Csaf Version: 2.0
Publisher: Red Hat Product Security
Advisory ID: RHSA-2026:26269
Vendor Severity: high
CVE Count: 22
Additional Cves: CVE-2026-8092, CVE-2026-8094, CVE-2026-8388, CVE-2026-8391, CVE-2026-8401, CVE-2026-8946, CVE-2026-8947, CVE-2026-8950, CVE-2026-8953, CVE-2026-8954, CVE-2026-8955, CVE-2026-8956, CVE-2026-8957, CVE-2026-8958, CVE-2026-8959, CVE-2026-8961, CVE-2026-8962, CVE-2026-8968, CVE-2026-8970, CVE-2026-8974, CVE-2026-8975

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Affected software

Description

AI analysisMachine-generated, updated 6 Nov 2026, 03:19 UTC

WeaknessesCWE-825, CWE-787, CWE-475 +6

Technical details

References

Community reviews

Related threats