CVE-2026-20083 is a medium severity vulnerability in Cisco IOS XE Software's Secure Copy Protocol (SCP) server feature. It allows an authenticated local attacker with low privileges to cause a denial of service (DoS) by sending a malformed SCP request via SSH. Successful exploitation causes the affected device to reload unexpectedly, disrupting service. This vulnerability affects numerous versions of Cisco IOS XE Software. No known exploits are reported in the wild. Patch status is not confirmed from the provided data; users should consult Cisco advisories for remediation updates.
CVE-2026-20110 is a medium severity vulnerability in Cisco IOS XE Software where incorrect privilege assignment allows a low-privileged authenticated local user to execute the 'start maintenance' command. Exploiting this vulnerability causes the device to enter maintenance mode, shutting down interfaces and resulting in a denial of service (DoS). Recovery requires a device administrator to manually issue the 'stop maintenance' command to restore normal operations.
A vulnerability in the bootloader of Cisco IOS XE Software for Cisco Catalyst 9200 Series Switches, Cisco Catalyst ESS9300 Embedded Series Switches, Cisco Catalyst IE9310 and IE9320 Rugged Series Switches, and Cisco IE3500 and IE3505 Rugged Series Switches could allow an authenticated, local attacker with level-15 privileges or an unauthenticated attacker with physical access to an affected device to execute arbitrary code at boot time and break the chain of trust.
This vulnerability is due to insufficient validation of software at boot time. An attacker could exploit this vulnerability by manipulating the loaded binaries on an affected device to bypass some of the integrity checks that are performed during the boot process. A successful exploit could allow the attacker to execute code that bypasses the requirement to run Cisco-signed images.
Cisco has assigned this security advisory a Security Impact Rating (SIR) of High rather than Medium as the score indicates because this vulnerability allows an attacker to bypass a major security feature of a device.
A vulnerability in the TLS library of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to exhaust the available memory of an affected device.
This vulnerability is due to improper management of memory resources during TLS connection setup. An attacker could exploit this vulnerability by repeatedly triggering the conditions that cause the memory increase. This could be done in a variety of ways, such as by repeatedly attempting Extensible Authentication Protocol (EAP) authentication when local EAP is enabled on an affected device or by using a machine-in-the-middle attack and resetting TLS connections between the affected device and other devices. A successful exploit could allow the attacker to exhaust the available memory on an affected device, resulting in an unexpected reload and a denial of service (DoS) condition.
A vulnerability in the HTTP Server feature of Cisco IOS Software and Cisco IOS XE Software Release 3E could allow an authenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending malformed HTTP requests to an affected device. A successful exploit could allow the attacker to cause a watchdog timer to expire and the device to reload, resulting in a DoS condition. To exploit this vulnerability, the attacker must have a valid user account.
A vulnerability in the Internet Key Exchange version 2 (IKEv2) feature of Cisco IOS Software, Cisco IOS XE Software, Cisco Secure Firewall Adaptive Security Appliance (ASA) Software, and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a memory leak, resulting in a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper parsing of IKEv2 packets. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device. A successful exploit of Cisco IOS Software and IOS XE Software could allow the attacker to cause the affected device to reload, resulting in a DoS condition. A successful exploit of Cisco Secure Firewall ASA Software and Secure FTD Software could allow the attacker to partially exhaust system memory, resulting in system instability, such as the inability to establish new IKEv2 VPN sessions. A manual reboot of the device is required to recover from this condition.
A vulnerability in the processing of Control and Provisioning of Wireless Access Points (CAPWAP) packets of Cisco IOS XE Wireless Controller Software for the Catalyst CW9800 Family could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper handling of a malformed CAPWAP packet. An attacker could exploit this vulnerability by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload unexpectedly, resulting in a DoS condition.
A vulnerability in the DHCP snooping feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause BOOTP packets to be forwarded between VLANs, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper handling of BOOTP packets on Cisco Catalyst 9000 Series Switches. An attacker could exploit this vulnerability by sending BOOTP request packets to an affected device. A successful exploit could allow an attacker to forward BOOTP packets from one VLAN to another, resulting in BOOTP VLAN leakage and potentially leading to high CPU utilization. This makes the device unreachable (either through console or remote management) and unable to forward traffic, resulting in a DoS condition.
Note: This vulnerability can be exploited with either unicast or broadcast BOOTP packets.
There are workarounds that address this vulnerability.
A vulnerability in the handling of an Egress Packet Network Interface (EPNI) Aligner interrupt in Cisco IOS XR Software for Cisco Network Convergence System (NCS) 5500 Series with NC57 line cards and Cisco NCS 5700 Routers and Cisco IOS XR Software for Third Party Software could allow an unauthenticated, remote attacker to cause the network processing unit (NPU) and ASIC to stop processing, preventing traffic from traversing the interface.
This vulnerability is due to the corruption of packets in specific cases when an EPNI Aligner interrupt is triggered while an affected device is experiencing heavy transit traffic. An attacker could exploit this vulnerability by sending a continuous flow of crafted packets to an interface of the affected device. A successful exploit could allow the attacker to cause persistent, heavy packet loss, resulting in a denial of service (DoS) condition.
Note: If active exploitation of this vulnerability is suspected, contact the Cisco Technical Assistance Center (TAC) or your contracted maintenance provider.
Cisco has assigned this security advisory a Security Impact Rating (SIR) of High rather than Medium as the score indicates. This change was made because the affected device operates within a critical network segment where compromise could lead to significant disruption or exposure, thereby elevating the overall risk beyond the base technical severity.
A vulnerability in the web-based management interface of Cisco Unified Contact Center Express (Unified CCX) could allow an unauthenticated, remote attacker to conduct cross-site scripting (XSS) attacks against a user of the interface.
This vulnerability exists because the web-based management interface of an affected system does not sufficiently validate user-supplied input. An attacker could exploit this vulnerability by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information.
A vulnerability in the web-based management interface of Cisco Finesse, Cisco Packaged Contact Center Enterprise (Packaged CCE), Cisco Unified Contact Center Enterprise (Unified CCE), Cisco Unified Contact Center Express (Unified CCX), and Cisco Unified Intelligence Center could allow an unauthenticated, remote attacker to conduct cross-site scripting (XSS) attacks against a user of the interface.
This vulnerability exists because the web-based management interface of an affected system does not sufficiently validate user-supplied input. An attacker could exploit this vulnerability by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information.
A vulnerability in task group assignment for a specific CLI command in Cisco IOS XR Software could allow an authenticated, local attacker to elevate privileges and gain full administrative control of an affected device.
This vulnerability is due to incorrect mapping of a command to task groups within the source code. An attacker with a low-privileged account could exploit this vulnerability by using the CLI command to bypass the task group–based checks. A successful exploit could allow the attacker to elevate privileges and perform actions on an affected device without authorization checks.
A vulnerability in the Intermediate System-to-Intermediate System (IS-IS) multi-instance routing feature of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause the IS-IS process to restart unexpectedly.
This vulnerability is due to insufficient input validation of ingress IS-IS packets. An attacker could exploit this vulnerability by sending crafted IS-IS packets to an affected device after forming an adjacency. A successful exploit could allow the attacker to cause the IS-IS process to restart unexpectedly, resulting in a temporary loss of connectivity to advertised networks and a denial of service (DoS) condition.
Note: The IS-IS protocol is a routing protocol. To exploit this vulnerability, an attacker must be Layer 2-adjacent to the affected device and must have formed an adjacency.
A vulnerability in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to execute arbitrary commands as root on the underlying operating system of an affected device.
This vulnerability is due to insufficient validation of user arguments that are passed to specific CLI commands. An attacker with a low-privileged account could exploit this vulnerability by using crafted commands at the prompt. A successful exploit could allow the attacker to elevate privileges to root and execute arbitrary commands on the underlying operating system.
A vulnerability in of Cisco Secure Firewall Threat Defense (FTD) Software could allow an authenticated, local attacker to cause the device to unexpectedly reload, causing a denial of service (DoS) condition.
This vulnerability is due to improper validation of user-supplied input. An attacker with a low-privileged account could exploit this vulnerability by using crafted commands at the CLI prompt. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
A vulnerability in the OSPF protocol of Cisco Secure Firewall ASA Software and Cisco Secure FTD Software could allow an authenticated, adjacent attacker to cause an affected device to reload unexpectedly, resulting in a DoS condition. To exploit this vulnerability, the attacker must have the OSPF secret key.
This vulnerability is due to insufficient input validation when processing OSPF link-state update (LSU) packets. An attacker could exploit this vulnerability by sending crafted OSPF LSU packets. A successful exploit could allow the attacker to corrupt the heap, causing the device to reload, resulting in a DoS condition.
A vulnerability in the OSPF protocol of Cisco Secure Firewall ASA Software and Cisco Secure FTD Software could allow an authenticated, adjacent attacker to cause an affected device to reload unexpectedly, resulting in a DoS condition. To exploit this vulnerability, the attacker must have the OSPF secret key.
This vulnerability is due to heap corruption in OSPF when parsing packets. An attacker could exploit this vulnerability by sending crafted packets to the OSPF service. A successful exploit could allow the attacker to corrupt the heap, causing the affected device to reload, resulting in a DoS condition.
A vulnerability in the OSPF protocol of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, adjacent attacker to corrupt memory on an affected device, resulting in a denial of service (DoS) condition.
This vulnerability is due to memory corruption when parsing OSPF protocol packets. An attacker could exploit this vulnerability by sending crafted OSPF packets to an affected device. A successful exploit could allow the attacker to cause memory corruption causing the affected device to reboot, resulting in a DoS condition.
A vulnerability in the OSPF protocol of Cisco Secure Firewall ASA Software and Cisco Secure FTD Software could allow an unauthenticated, adjacent attacker to cause an affected device to reload unexpectedly, resulting in a DoS condition when OSPF canonicalization debug is enabled by using the command debug ip ospf canon.
This vulnerability is due to insufficient input validation when processing OSPF LSU packets. An attacker could exploit this vulnerability by sending crafted unauthenticated OSPF packets. A successful exploit could allow the attacker to write to memory outside of the packet data, causing the device to reload, resulting in a DoS condition.
A vulnerability in the OSPF protocol of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an authenticated, adjacent attacker to exhaust memory on an affected device, resulting in a denial of service (DoS) condition.
This vulnerability is due to improperly validating input by the OSPF protocol when parsing packets. An attacker could exploit this vulnerability by by sending crafted OSPF packets to an affected device. A successful exploit could allow the attacker to exhaust memory on the affected device, resulting in a DoS condition.
