Search: ge.call

A vulnerability in the Linux kernel's framebuffer device (fbdev) subsystem related to user-invoked calls to fb_set_var() has been resolved. The fix involves wrapping these calls in a helper function that properly handles fbcon state during display updates. Previously, only the FBIOPUT_VSCREENINFO ioctl call performed all necessary steps, while other callers missed fbcon-related updates, potentially leading to inconsistent hardware state. The update ensures that mode changes are checked with fbcon, hardware state is updated, and fbcon is finally updated, improving consistency and correctness in display mode changes.

A vulnerability in the Linux kernel's HID core subsystem allows an out-of-bounds (OOB) read of the field->usage array in the hid_set_field() function. This occurs because a call to hid_dump_input() dereferences a pointer before a bounds check on the offset is performed. The issue arises when offsets exceed the report_count but are less than maxusage, leading to reading beyond the allocated usage array. This flaw was discovered and fixed by moving the call to hid_dump_input() after the bounds check, preventing OOB reads without changing valid behavior.

In the Linux kernel, the following vulnerability has been resolved: futex: Fix race on the initial mm->futex.phash.ref allocation futex_hash_allocate() allocates mm->futex.phash.ref without any locking. Commit d9b05321e21e ("futex: Move futex_hash_free() back to __mmput()") moved the allocation here and assumed that the process has just a single thread at this point. Commit ee9dce44362b ("futex: Drop CLONE_THREAD requirement for private default hash alloc") widened need_futex_hash_allocate_default() to cover any CLONE_VM clone, but left out vfork because the parent is suspended and cannot race. That no longer holds once vfork is nested. If a vfork child calls vfork again and is then killed with SIGKILL, the parent is released from its vfork wait and runs concurrently with the grandchild in the same mm. Neither of them went through futex_hash_allocate_default(). When both call prctl(PR_FUTEX_HASH, PR_FUTEX_HASH_SET_SLOTS) at the same time, each one sees mm->futex.phash.ref as NULL and stores its own percpu counter. Only the last store survives. The counter stored first is no longer reachable from the mm, so the references on it are not seen by __futex_ref_atomic_end(). A private hash that still has references is then considered dead and freed, and a task that still holds one of its buckets writes into freed memory in futex_q_lock(). Store the counter once with cmpxchg() and let the loser free_percpu() its own. The initial reference has to be taken before the store, otherwise another task can install a private hash while the counter is still 0.

In the Linux kernel, the following vulnerability has been resolved: futex: Fix race in futex_pivot_pending() during private hash resize A task performing a custom private hash resize can remain blocked in uninterruptible sleep indefinitely. The hung-task detector reports: INFO: task futex-resizer:314 blocked for more than 10 seconds. task:futex-resizer state:D stack:14824 pid:314 tgid:312 ppid:311 Call Trace: __schedule+0x521/0xf30 schedule+0x22/0xa0 futex_hash_allocate+0x3db/0x490 __do_sys_prctl+0x6f5/0xbd0 do_syscall_64+0xf9/0x530 entry_SYSCALL_64_after_hwframe+0x77/0x7f Kernel panic - not syncing: hung_task: blocked tasks futex_pivot_pending() allows the resize request to continue when either no replacement hash is pending (hash_new == NULL) or the current hash reference count has reached zero. After the final-reference wake, another futex task can complete the pivot between the two observations: T1 T2 futex_hash_allocate() wait_var_event(mm, ...) futex_pivot_pending(mm) hash_new != NULL futex_hash() futex_ref_get(old) -> false futex_pivot_hash(mm) hash_new = NULL __futex_pivot_hash(mm, new) rcu_assign_pointer(hash, new) fph = rcu_dereference(hash) /* new */ futex_ref_is_dead(fph) -> false schedule() The pivot changes the state from hash_new != NULL with a dead current hash to hash_new == NULL with a live current hash. Because futex_pivot_pending() reads hash_new and hash without serialization, the resize task can observe hash_new in the pre-pivot state and hash in the post-pivot state, causing futex_pivot_pending() to return false even though the pivot has completed. The task then goes to sleep after the wakeup has already been consumed. Serialize state reads in futex_pivot_pending() using futex_mm_phash::lock. This guarantees that futex_pivot_pending() observes hash_new and hash atomically, eliminating the race condition.

In the Linux kernel, the following vulnerability has been resolved: nfc: nci: fix out-of-bounds write in nci_target_auto_activated() nci_target_auto_activated() appends a target to the fixed-size array ndev->targets[NCI_MAX_DISCOVERED_TARGETS] and increments ndev->n_targets without first checking the array is full; unlike its sibling nci_add_new_target(), which bails out when n_targets already equals NCI_MAX_DISCOVERED_TARGETS. ndev->n_targets is only cleared by nci_clear_target_list(), so an NFCC that repeatedly re-runs discovery (RF_DISCOVER_RSP, which re-enters NCI_DISCOVERY without clearing the target list) and reports an auto-activated target (RF_INTF_ACTIVATED_NTF) drives n_targets past the limit. The append then writes a struct nfc_target past the end of the array (a slab out-of-bounds write), and nfc_targets_found() goes on to walk the array with the inflated count: BUG: KASAN: slab-out-of-bounds in nci_add_new_protocol+0x94/0x2ac [nci] Write of size 2 at addr ffff0000c7299a18 by task kworker/u8:0/12 Workqueue: nfc0_nci_rx_wq nci_rx_work [nci] Call trace: nci_add_new_protocol+0x94/0x2ac [nci] nci_ntf_packet+0xddc/0x11a0 [nci] nci_rx_work+0x15c/0x1e0 [nci] process_one_work+0x2dc/0x500 worker_thread+0x240/0x460 kthread+0x1c0/0x1d0 ret_from_fork+0x10/0x20 The buggy address belongs to the cache kmalloc-2k of size 2048 The buggy address is located 1024 bytes to the right of allocated 1560-byte region [ffff0000c7299000, ffff0000c7299618) Guard nci_target_auto_activated() with the same check used by nci_add_new_target().

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: ensure tx headroom in usb_sdio_tx_prepare_skb mt7925_usb_sdio_tx_prepare_skb() pushes a TX descriptor and a USB header onto every skb and assumes the headroom for them is already there. That holds for locally generated traffic, where mac80211 reserves hw->extra_tx_headroom, but forwarded frames are sent through ieee80211_8023_xmit(), which does not reserve it. Bridge a wired interface to an mt7925u AP and the first forwarded frame that arrives short panics the kernel: skbuff: skb_under_panic: len:415 put:4 tail:0x19b end:0x640 dev:wlan1 kernel BUG at net/core/skbuff.c:212! Call trace: skb_panic+0x58/0x60 (P) skb_push+0x58/0x60 mt7925_usb_sdio_tx_prepare_skb+0xf8/0x1b8 [mt7925_common] mt76u_tx_queue_skb+0xa0/0x1f8 [mt76_usb] __mt76_tx_queue_skb+0x54/0xe8 [mt76] mt76_txq_schedule.part.0+0x204/0x478 [mt76] mt76_txq_schedule_all+0x50/0x80 [mt76] mt792x_tx_worker+0x68/0x100 [mt792x_lib] __mt76_worker_fn+0x84/0x150 [mt76] Whether a given setup hits it depends on how much headroom the ingress netdev leaves in its rx skbs. Reproduced on a Raspberry Pi 5 bridging onboard ethernet to a Netgear A9000; originally reported on an MT7986 router running OpenWrt. Nick Morrow's testing on a Pi 4 (bcmgenet), which leaves more headroom, helped narrow the trigger to the ingress path. The same bug was fixed on mt7921 by commit 98c4d0abf5c4 ("mt76: mt7921: don't assume adequate headroom for SDIO headers"), but mt7925 was copied from mt7921 without the fix. Add the same guard here.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: reject invalid block index in GC ioctl Syzbot reported list corruption caused by a double list_add_tail() call on bh->b_assoc_buffers within nilfs_lookup_dirty_data_buffers(). Analysis revealed that the root cause was the insertion of a page/folio with a page index of ULONG_MAX into the page cache via the GC ioctl. filemap_get_folios_tag(), called by nilfs_lookup_dirty_data_buffers(), repeatedly detects a dirty folio with a page index of ULONG_MAX due to index wrap-around, leading to duplicate processing of dirty buffers. As a preparatory step, the GC ioctl loads the page/folio of the block to be moved during GC and inserts it into the page cache based on information in the nilfs_vdesc structure passed as an argument. Normally, this does not cause issues because the user-space GC library configures the nilfs_vdesc structure properly. However, since there is no range check on the parameters determining the page index, a request with artificially crafted parameters -- such as those generated by Syzbot -- can result in a page/folio being inserted with a page index of ULONG_MAX, triggering the above problem. This resolves the issue by checking the ranges of 'vd_offset' and 'vd_vblocknr' in the nilfs_vdesc structure that determine the page index, thereby preventing the invalid page/folio insertions.

In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Fix CMD_SYNC use-after-free on teardown arm_smmu_impl_remove() is registered as a devres action in arm_smmu_impl_probe(), before arm_smmu_init_queues() allocates smmu->cmdq.q.base. On a devres unwind, whether a failed probe or an unbind, the queue is freed first and arm_smmu_impl_remove() then runs tegra241_cmdqv_remove_vintf(), whose VINTF deinit issues a CMD_SYNC on the freed memory. Observed during testing with a QEMU hack that makes the VCMDQ fail to enable, so the impl reset fails and probe aborts into the devres unwind: platform NVDA200C:00: tegra241_cmdqv: VINTF0: VCMDQ0/LVCMDQ0: failed to enable, STATUS=0x00000000 platform NVDA200C:00: tegra241_cmdqv: VINTF0: VCMDQ0/LVCMDQ0: GERRORN=0x0, GERROR=0x4, CONS=0x0 platform NVDA200C:00: tegra241_cmdqv: VINTF0: VCMDQ0/LVCMDQ0: uncleared error detected, resetting arm-smmu-v3 arm-smmu-v3.0.auto: failed to reset impl arm-smmu-v3 arm-smmu-v3.0.auto: probe with driver arm-smmu-v3 failed with error -110 Unable to handle kernel paging request at virtual address ffff8000891e0098 ... Internal error: Oops: 0000000096000047 [#1] SMP ... Call trace: arm_smmu_cmdq_issue_cmdlist+0x320/0x6fc (P) tegra241_vcmdq_hw_deinit+0x98/0x168 tegra241_vintf_hw_deinit+0x5c/0x1b0 tegra241_cmdqv_remove_vintf+0x34/0xec tegra241_cmdqv_remove+0x40/0x9c arm_smmu_impl_remove+0x20/0x30 devm_action_release+0x14/0x20 devres_release_all+0xa8/0x110 device_unbind_cleanup+0x18/0x84 really_probe+0x1f0/0x29c Drop the VINTF deinit from tegra241_cmdqv_remove_vintf() so the unwind no longer touches the freed queue. Quiesce the VINTFs earlier instead. Add a device_disable() impl op and run it from arm_smmu_disable_action() while the CMDQ is still up. That handles a live unbind. A failed reset is already handled because tegra241_vintf_hw_init() deinits the VINTF on its own error path. tegra241_cmdqv_remove_vintf() is also used by the iommufd viommu destroy path, so quiesce there too.

In the Linux kernel, the following vulnerability has been resolved: iommu/iommufd: Fix NULL pointer deref in iommufd_ioas_change_process when racing with iopt_map_file_pages iommufd_ioas_change_process() iterates every IOAS area while only holding every IOAS iova_rwsem, so it assumes every area has a non-NULL pages pointer. That assumption can be false when it runs concurrently with iopt_map_file_pages(). iopt_map_pages() executes in two phases. It first creates the area and inserts it into the interval tree under iova_rwsem, with area->pages still NULL. It then drops iova_rwsem and later fills area->pages under domains_rwsem. This leaves a window between area creation and area->pages fill where a concurrent iommufd_ioas_change_process() can observe the area and dereference a NULL area->pages pointer, leading to a NULL pointer dereference: BUG: kernel NULL pointer dereference, address: 00000000000000c0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 4b655067 P4D 4b655067 PUD 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 11841 Comm: syz.1.628 Not tainted 7.1.0 #3 PREEMPT(full) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:iommufd_ioas_change_process+0x419/0xd50 drivers/iommu/iommufd/ioas.c:538 Code: 48 89 c3 48 85 c0 0f 84 cc 00 00 00 e8 10 f5 cb fd 48 8d 7b 68 e8 a7 b5 eb fd 48 8b 6b 68 48 8d bd c0 00 00 00 e8 17 b2 eb fd <8b> ad c0 00 00 00 bf 01 00 00 00 89 ee e8 85 ef cb fd 83 fd 01 74 RSP: 0018:ffffc90015c17d28 EFLAGS: 00010246 RAX: ffff8880186d5328 RBX: ffff88801d25e240 RCX: 0000000080000000 RDX: 00000000000002d7 RSI: ffffffff83ba9e10 RDI: 00000000000000c0 RBP: 0000000000000000 R08: ffffffff8e781eb8 R09: 0000000000000000 R10: 00000000000000c0 R11: ffffffff83ba9e29 R12: ffff88802e216008 R13: ffff88802e216000 R14: 0000000000000001 R15: 0000000000000000 FS: 00007f4aea3f66c0(0000) GS:ffff8880b1fa1000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000c0 CR3: 000000004b75c000 CR4: 0000000000350ef0 Call Trace: <TASK> iommufd_fops_ioctl+0x287/0x400 drivers/iommu/iommufd/main.c:533 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x120/0x170 fs/ioctl.c:583 x64_sys_call+0x1092/0x1fb0 arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x10a/0x680 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f4aec1a82bd Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f4aea3f6018 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f4aec436090 RCX: 00007f4aec1a82bd RDX: 0000200000000180 RSI: 0000000000003b92 RDI: 0000000000000003 RBP: 00007f4aec250295 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f4aec436128 R14: 00007f4aec436090 R15: 00007ffd04ef23e0 </TASK> Modules linked in: CR2: 00000000000000c0 ---[ end trace 0000000000000000 ]--- RIP: 0010:iommufd_ioas_change_process+0x419/0xd50 drivers/iommu/iommufd/ioas.c:538 Code: 48 89 c3 48 85 c0 0f 84 cc 00 00 00 e8 10 f5 cb fd 48 8d 7b 68 e8 a7 b5 eb fd 48 8b 6b 68 48 8d bd c0 00 00 00 e8 17 b2 eb fd <8b> ad c0 00 00 00 bf 01 00 00 00 89 ee e8 85 ef cb fd 83 fd 01 74 RSP: 0018:ffffc90015c17d28 EFLAGS: 00010246 RAX: ffff8880186d5328 RBX: ffff88801d25e240 RCX: 0000000080000000 RDX: 00000000000002d7 RSI: ffffffff83ba9e10 RDI: 00000000000000c0 RBP: 0000000000000000 R08: ffffffff8e781eb8 R09: 0000000000000000 R10: 00000000000000c0 R11: ffffffff83ba9e29 R12: ffff88802e216008 R13: ffff88802e216000 R14: 0000000000000001 R15: 0000000000000000 FS: 00007f4aea3f66c0(000 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ipv6: seg6: clear IPv4 control block on IPIP decapsulation End.DX4 and End.DT4 decapsulate an IPv4 packet through decap_and_validate() and send it directly to IPv4 routing. The inner packet therefore bypasses ip_rcv_core(), which normally clears IPCB before IPv4 interprets skb->cb. The skb instead retains IP6CB data from the outer packet. IP6CB and IPCB use the same skb->cb storage, so IP6CB(skb)->lastopt overlaps IPCB(skb)->opt.optlen and srr, while IP6CB(skb)->nhoff overlaps rr and ts. The sender can make the stale optlen byte nonzero with a valid outer extension-header chain. The reproducers put an eight-byte Destination Options header immediately after the 40-byte IPv6 header and before the Segment Routing Header. ipv6_destopt_rcv() records the sender-controlled Destination Options offset in both lastopt and nhoff, setting them to 40. On the reproduced little-endian x86-64 kernel, IPv4 therefore sees optlen = 40 and rr = 40. Both tcp_v4_save_options() and __ip_options_echo() skip option copying when optlen is zero. Here optlen is 40, so the TCP SYN path allocates room for 40 bytes of option data and calls __ip_options_echo(). The stale rr value makes that function read inner packet byte 41 as the Record Route option length. The reproducers set that sender-controlled byte to 255, so __ip_options_echo() copies 255 bytes into the 40-byte option-data area. Separate End.DX4 and End.DT4 reproducers on the unpatched v7.2-rc5 kernel both produced: BUG: KASAN: slab-out-of-bounds in __ip_options_echo() Write of size 255 The relevant End.DX4 call path is: __ip_options_echo tcp_v4_route_req tcp_conn_request tcp_v4_conn_request tcp_rcv_state_process tcp_v4_do_rcv tcp_v4_rcv ip_protocol_deliver_rcu ip_local_deliver_finish ip_local_deliver input_action_end_dx4_finish input_action_end_dx4 The relevant End.DT4 call path is: __ip_options_echo tcp_v4_route_req tcp_conn_request tcp_v4_conn_request tcp_rcv_state_process tcp_v4_do_rcv tcp_v4_rcv ip_protocol_deliver_rcu ip_local_deliver_finish ip_local_deliver input_action_end_dt4 tcp_v4_save_options() is inlined into the tcp_v4_route_req() path, so it does not appear as a separate frame. When decap_and_validate() handles IPPROTO_IPIP, save the ingress interface from IP6CB, clear IPCB, and restore the saved value. Doing this in the common decapsulation path covers End.DX4, End.DT4, and End.DT46's IPv4 arm. Use IP6CB(skb)->iif rather than skb->skb_iif. These actions run after l3mdev processing, which can replace skb_iif with the L3 master; IP6CB iif still records the receiving interface set at IPv6 ingress.

In the Linux kernel, the following vulnerability has been resolved: xfrm: espintcp: fix UAF during close ZDI reported and analyzed a race condition during close for espintcp sockets: espintcp_close() frees emsg->skb via kfree_skb() without holding any socket lock. Concurrently, the xfrm_trans_reinject work queue invokes esp_output_tcp_finish() -> espintcp_push_skb() -> espintcp_push_msgs() -> skb_send_sock_locked(), which reads the same skb as a data source. Fix this by adding a synchronize_rcu() call after resetting sk_prot, since esp_output_tcp_finish() runs under RCU and won't use a socket with sk_prot == &tcp_prot. Simply taking the socket lock in espintcp_close() could lead to leaks, if esp_output_tcp_finish() re-adds an skb in the slot we just freed. After this, the existing barrier() is no longer needed.

In the Linux kernel, the following vulnerability has been resolved: tcp: fix AO info use-after-free in tcp_ao_connect_init() tcp_v4_connect() adds a SYN-SENT socket to the ehash before calling tcp_connect(). If TCP-AO is configured, tcp_connect() first verifies that a key matches the peer and the bound device's current L3 master. tcp_ao_connect_init() later resolves the L3 master again and removes keys which do not match it. The socket lock does not stabilize the bound device's VRF membership. Detaching the device from its VRF between the initial validation and the L3-master calculation in tcp_ao_connect_init() can therefore make the validation succeed while initialization observes the default L3 domain and removes the only key. The subsequent AO lookup then fails, so the no-key path clears tp->ao_info and frees it directly. The receive path can find the socket in the ehash and load tp->ao_info under RCU before acquiring the socket lock. A reader which loaded the old pointer can thus continue into tcp_inbound_ao_hash() after the direct free. The issue was found during a static audit of TCP-AO object lifetime. An unprivileged reproducer in self-created user and network namespaces raced connect() with detaching a veth from its VRF while sending TCP-AO segments. It triggered the same KASAN report on two fresh boots: BUG: KASAN: slab-use-after-free in tcp_inbound_ao_hash+0x585/0x19f0 Write of size 8 at addr ffff88800bf88128 by task tcp_ao_vrf_race/232 Call Trace: tcp_inbound_ao_hash+0x585/0x19f0 tcp_inbound_hash+0x677/0xa80 tcp_v4_rcv+0x1c3e/0x3ab0 Allocated by task 235: tcp_ao_alloc_info+0x43/0xf0 tcp_ao_add_cmd+0xdf7/0x13b0 do_tcp_setsockopt+0x168c/0x2640 Freed by task 235: kfree+0x1b8/0x550 tcp_connect+0x252/0x4f00 tcp_v4_connect+0x1114/0x1720 The bad address is 40 bytes inside the freed 128-byte object, matching the tcp_ao_info counters.key_not_found field. The two runs used 1000 attempts each, reached the no-key path 366 and 411 times, and produced one and two KASAN reports respectively. With this change, the same reproducer reached the no-key path 366 times in 1000 attempts without a KASAN report or oops. Use tcp_ao_destroy_sock() for the no-key path. It unpublishes the AO info, updates the socket memory and static-key accounting, and defers the free until after an RCU grace period. Also drop the WARN_ON_ONCE() and its stale comment. The VRF detach race makes the no-key state reachable during normal operation, so it is a handled condition rather than an impossible assertion. On panic_on_warn kernels the WARN would turn this handled race into a kernel panic.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_tcm: keep port count until LUN teardown completes tcm_usbg_drop_nexus() permits session removal once tpg_port_count reaches zero. However, usbg_port_unlink() currently decrements that count from the fabric_pre_unlink() callback, before core_dev_del_lun() waits for active se_lun references to drain. If removal of the last LUN races a nexus removal, the latter can observe a zero port count and call target_remove_session(). This frees sess_cmd_map while an in-flight struct usbg_cmd, including its work item, can still be accessed. Overlapping the last-LUN unlink with nexus removal reproduces this lifetime violation as a DEBUG_OBJECTS "free active" warning for usbg_cmd_work, followed by a target-core BUG/Oops. The generic target-core unlink path has no callback after core_dev_del_lun() completes. Add an optional fabric_post_unlink() callback and use it for the f_tcm port count. The count now remains nonzero until core_dev_del_lun() has finished draining active LUN references, preventing nexus removal from freeing the session during command completion.

Onyx 4.6.6 fails to properly restrict access to custom tool credentials stored in custom_headers, allowing any authenticated user to read admin-defined API keys. Attackers with basic authentication can call GET /tool/{tool_id} or GET /tool endpoints to retrieve plaintext authorization headers and third-party API credentials, then use them to directly access upstream APIs.

CVE-2026-85405 is a medium severity cross-site scripting (XSS) vulnerability in Eleveo Call Recording Software version 9.7.0. The flaw exists in the /callrec/roleAddAction.do endpoint where manipulation of the name or username argument can lead to XSS. The vulnerability can be exploited remotely and requires low privileges with user interaction. The vendor has not responded to disclosure and no patch or official fix is currently available.

The PyPI package `tsshare` is malicious. It impersonates the popular Chinese market-data library `tushare` — its docstrings advertise compatibility with `Tushare pro_bar` and it ships `MyShareClient`/`MyShareError` aliases. `tsshare/client.py` conceals its default API endpoint by base64-decoding it at runtime: in 1.0.5–1.0.18 the value decodes to the hardcoded raw IP `https://47.112.191.75` (Alibaba Cloud, China), and in 1.0.19 it rotates to the domain `https://fszzw56.com`. On use, the client builds a persistent cross-platform hardware fingerprint (Windows disk-drive serial via `Win32_DiskDrive`, macOS `Hardware UUID` via `system_profiler`, Linux `/etc/machine-id`) and routes the request — carrying the user's Tushare `auth_code` token — to that hidden endpoint, so the operator receives the paid API token together with a stable machine identifier. There is no install-time hook; exfiltration occurs on API use. --- _-= Per source details. Do not edit below this line.=-_ ## Source: amazon-inspector (539c8fdb69887b093801655215f1857f53abb20e6dc763198c543def86c39387) The package presents itself as a drop-in replacement for Tushare's pro_api, but every method call is dispatched through a query() that POSTs to a hardcoded default backend at https://47.112.191.75/api/v1/proxy rather than to tushare.pro. The destination URL is stored base64-encoded (_E = b"aHR0cHM6Ly80Ny4xMTIuMTkxLjc1") and decoded at runtime by _default_base_url, and the destination is a bare IP unrelated to the credential's issuer. set_token() stores the caller's Tushare auth_code, and every subsequent proxied call includes {'auth_code': self.auth_code,...} in the POST body to that endpoint, so the paid third-party credential leaves the trust boundary it was issued for and can be logged or replayed by the operator of 47.112.191.75. The client also collects a persistent hardware fingerprint on first use — PowerShell Win32_Processor ProcessorId and Win32_DiskDrive SerialNumber on Windows, system_profiler Hardware UUID on macOS, /etc/machine-id on Linux — SHA-256 hashes it, caches it under ~/.tsshare/device_id.json, and attaches it as meta.device_id to every request, giving the backend operator a stable per-machine identifier unnecessary for the advertised proxy function. TLS certificate verification on the requests.Session is disabled by default (session.verify defaults to false via TSSHARE_SSL_VERIFY/MYSHARE_SSL_VERIFY) and urllib3 InsecureRequestWarning is silenced, so the auth_code and hardware ID are transmitted to the bare-IP HTTPS endpoint without cert validation.

toml-node is a TOML parser for Node.js and the browser. Prior to 4.2.0, toml.parse() uses a Peggy 5.1.0 generated recursive-descent parser in lib/parser.js whose peg$parsevalue, peg$parsearray, and peg$parseinline_table_entry functions recurse through nested arrays and inline tables without a depth limit. A remote unauthenticated application parsing an attacker-controlled TOML document containing a few thousand nested arrays or inline tables can exhaust the Node.js call stack, raise an unexpected RangeError rather than the parser's SyntaxError, and terminate an unprotected request worker or process. The corresponding grammar source is src/toml.pegjs, where the generated parser must be bounded. This issue is fixed in version 4.2.0.

GeoNetwork is a catalog application to manage spatially referenced resources. Prior to versions 4.4.12 and 4.2.17, the Saxon XSLT processor used to render formatters is configured without secure processing (`FEATURE_SECURE_PROCESSING`) and without disabling Java extension functions (`ALLOW_EXTERNAL_FUNCTIONS`). Any stylesheet loaded by GeoNetwork can therefore invoke `java.lang.Runtime.exec()` or `java.lang.ProcessBuilder` directly, achieving arbitrary command execution as the GeoNetwork process user. A user with sufficient privileges to upload a formatter can deliver a `.xsl` file containing Java extension call that execute arbitrary OS commands with the privileges of the GeoNetwork process. The issue is patched in GeoNetwork versions 4.4.12 and 4.2.17.

Gardens v2 is a modular governance framework that enables communities to create and manage multiple governance pools with customizable parameters and voting mechanisms. Prior to 0xc9d4e0dacd937364793278180551e59d93cd43f9, StreamingEscrow.claim() correctly rejects withdrawals while an escrow is disputed, but the permissionless syncOutflow() path performs the same excess-balance transfer without checking disputed. After a streaming proposal is challenged, anyone can call syncOutflow() to transfer escrowed SuperTokens to the proposal beneficiary while the dispute is pending. If the proposal is later rejected, those tokens cannot be recovered by drainToStrategy(). This issue has been patched in 0xc9d4e0dacd937364793278180551e59d93cd43f9.