Search: smp.cat
98 threats
Most recently published first
| Severity | CVSS | Signals | Threat | Source | Published | Score and star |
|---|---|---|---|---|---|---|
| Medium | 5.7 | EPSS 0.2% | Medium5.7EPSS 0.2%GCVE DatabaseCVE-2025-40052 In the Linux kernel, the following vulnerability has been resolved: smb: client: fix crypto buffers in non-linear memory The crypto API, through the scatterlist API, expects input buffers to be in linear memory. We handle this with the cifs_sg_set_buf() helper that converts vmalloc'd memory to their corresponding pages. However, when we allocate our aead_request buffer (@creq in smb2ops.c::crypt_message()), we do so with kvzalloc(), which possibly puts aead_request->__ctx in vmalloc area. AEAD algorithm then uses ->__ctx for its private/internal data and operations, and uses sg_set_buf() for such data on a few places. This works fine as long as @creq falls into kmalloc zone (small requests) or vmalloc'd memory is still within linear range. Tasks' stacks are vmalloc'd by default (CONFIG_VMAP_STACK=y), so too many tasks will increment the base stacks' addresses to a point where virt_addr_valid(buf) will fail (BUG() in sg_set_buf()) when that happens. In practice: too many parallel reads and writes on an encrypted mount will trigger this bug. To fix this, always alloc @creq with kmalloc() instead. Also drop the @sensitive_size variable/arguments since kfree_sensitive() doesn't need it. Backtrace: [ 945.272081] ------------[ cut here ]------------ [ 945.272774] kernel BUG at include/linux/scatterlist.h:209! [ 945.273520] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI [ 945.274412] CPU: 7 UID: 0 PID: 56 Comm: kworker/u33:0 Kdump: loaded Not tainted 6.15.0-lku-11779-g8e9d6efccdd7-dirty #1 PREEMPT(voluntary) [ 945.275736] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-2-gc13ff2cd-prebuilt.qemu.org 04/01/2014 [ 945.276877] Workqueue: writeback wb_workfn (flush-cifs-2) [ 945.277457] RIP: 0010:crypto_gcm_init_common+0x1f9/0x220 [ 945.278018] Code: b0 00 00 00 48 83 c4 08 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 48 c7 c0 00 00 00 80 48 2b 05 5c 58 e5 00 e9 58 ff ff ff <0f> 0b 0f 0b 0f 0b 0f 0b 0f 0b 0f 0b 48 c7 04 24 01 00 00 00 48 8b [ 945.279992] RSP: 0018:ffffc90000a27360 EFLAGS: 00010246 [ 945.280578] RAX: 0000000000000000 RBX: ffffc90001d85060 RCX: 0000000000000030 [ 945.281376] RDX: 0000000000080000 RSI: 0000000000000000 RDI: ffffc90081d85070 [ 945.282145] RBP: ffffc90001d85010 R08: ffffc90001d85000 R09: 0000000000000000 [ 945.282898] R10: ffffc90001d85090 R11: 0000000000001000 R12: ffffc90001d85070 [ 945.283656] R13: ffff888113522948 R14: ffffc90001d85060 R15: ffffc90001d85010 [ 945.284407] FS: 0000000000000000(0000) GS:ffff8882e66cf000(0000) knlGS:0000000000000000 [ 945.285262] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 945.285884] CR2: 00007fa7ffdd31f4 CR3: 000000010540d000 CR4: 0000000000350ef0 [ 945.286683] Call Trace: [ 945.286952] <TASK> [ 945.287184] ? crypt_message+0x33f/0xad0 [cifs] [ 945.287719] crypto_gcm_encrypt+0x36/0xe0 [ 945.288152] crypt_message+0x54a/0xad0 [cifs] [ 945.288724] smb3_init_transform_rq+0x277/0x300 [cifs] [ 945.289300] smb_send_rqst+0xa3/0x160 [cifs] [ 945.289944] cifs_call_async+0x178/0x340 [cifs] [ 945.290514] ? __pfx_smb2_writev_callback+0x10/0x10 [cifs] [ 945.291177] smb2_async_writev+0x3e3/0x670 [cifs] [ 945.291759] ? find_held_lock+0x32/0x90 [ 945.292212] ? netfs_advance_write+0xf2/0x310 [ 945.292723] netfs_advance_write+0xf2/0x310 [ 945.293210] netfs_write_folio+0x346/0xcc0 [ 945.293689] ? __pfx__raw_spin_unlock_irq+0x10/0x10 [ 945.294250] netfs_writepages+0x117/0x460 [ 945.294724] do_writepages+0xbe/0x170 [ 945.295152] ? find_held_lock+0x32/0x90 [ 945.295600] ? kvm_sched_clock_read+0x11/0x20 [ 945.296103] __writeback_single_inode+0x56/0x4b0 [ 945.296643] writeback_sb_inodes+0x229/0x550 [ 945.297140] __writeback_inodes_wb+0x4c/0xe0 [ 945.297642] wb_writeback+0x2f1/0x3f0 [ 945.298069] wb_workfn+0x300/0x490 [ 945.298472] process_one_work+0x1fe/0x590 [ 945.298949] worker_thread+0x1ce/0x3c0 [ 945.299397] ? __pfx_worker_thread+0x10/0x10 [ 945.299900] kthr ---truncated--- EPSS 0.2%Vulnerability | GCVE Database | ||
| High | 7.1 | EPSS 0.2% | High7.1EPSS 0.2%GCVE DatabaseCVE-2025-40038 In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Skip fastpath emulation on VM-Exit if next RIP isn't valid Skip the WRMSR and HLT fastpaths in SVM's VM-Exit handler if the next RIP isn't valid, e.g. because KVM is running with nrips=false. SVM must decode and emulate to skip the instruction if the CPU doesn't provide the next RIP, and getting the instruction bytes to decode requires reading guest memory. Reading guest memory through the emulator can fault, i.e. can sleep, which is disallowed since the fastpath handlers run with IRQs disabled. BUG: sleeping function called from invalid context at ./include/linux/uaccess.h:106 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 32611, name: qemu preempt_count: 1, expected: 0 INFO: lockdep is turned off. irq event stamp: 30580 hardirqs last enabled at (30579): [<ffffffffc08b2527>] vcpu_run+0x1787/0x1db0 [kvm] hardirqs last disabled at (30580): [<ffffffffb4f62e32>] __schedule+0x1e2/0xed0 softirqs last enabled at (30570): [<ffffffffb4247a64>] fpu_swap_kvm_fpstate+0x44/0x210 softirqs last disabled at (30568): [<ffffffffb4247a64>] fpu_swap_kvm_fpstate+0x44/0x210 CPU: 298 UID: 0 PID: 32611 Comm: qemu Tainted: G U 6.16.0-smp--e6c618b51cfe-sleep #782 NONE Tainted: [U]=USER Hardware name: Google Astoria-Turin/astoria, BIOS 0.20241223.2-0 01/17/2025 Call Trace: <TASK> dump_stack_lvl+0x7d/0xb0 __might_resched+0x271/0x290 __might_fault+0x28/0x80 kvm_vcpu_read_guest_page+0x8d/0xc0 [kvm] kvm_fetch_guest_virt+0x92/0xc0 [kvm] __do_insn_fetch_bytes+0xf3/0x1e0 [kvm] x86_decode_insn+0xd1/0x1010 [kvm] x86_emulate_instruction+0x105/0x810 [kvm] __svm_skip_emulated_instruction+0xc4/0x140 [kvm_amd] handle_fastpath_invd+0xc4/0x1a0 [kvm] vcpu_run+0x11a1/0x1db0 [kvm] kvm_arch_vcpu_ioctl_run+0x5cc/0x730 [kvm] kvm_vcpu_ioctl+0x578/0x6a0 [kvm] __se_sys_ioctl+0x6d/0xb0 do_syscall_64+0x8a/0x2c0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f479d57a94b </TASK> Note, this is essentially a reapply of commit 5c30e8101e8d ("KVM: SVM: Skip WRMSR fastpath on VM-Exit if next RIP isn't valid"), but with different justification (KVM now grabs SRCU when skipping the instruction for other reasons). | GCVE Database | ||
| High | 7.8 | EPSS 0.2% | High7.8EPSS 0.2%GCVE DatabaseCVE-2025-40027 In the Linux kernel, the following vulnerability has been resolved: net/9p: fix double req put in p9_fd_cancelled Syzkaller reports a KASAN issue as below: general protection fault, probably for non-canonical address 0xfbd59c0000000021: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: maybe wild-memory-access in range [0xdead000000000108-0xdead00000000010f] CPU: 0 PID: 5083 Comm: syz-executor.2 Not tainted 6.1.134-syzkaller-00037-g855bd1d7d838 #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:__list_del include/linux/list.h:114 [inline] RIP: 0010:__list_del_entry include/linux/list.h:137 [inline] RIP: 0010:list_del include/linux/list.h:148 [inline] RIP: 0010:p9_fd_cancelled+0xe9/0x200 net/9p/trans_fd.c:734 Call Trace: <TASK> p9_client_flush+0x351/0x440 net/9p/client.c:614 p9_client_rpc+0xb6b/0xc70 net/9p/client.c:734 p9_client_version net/9p/client.c:920 [inline] p9_client_create+0xb51/0x1240 net/9p/client.c:1027 v9fs_session_init+0x1f0/0x18f0 fs/9p/v9fs.c:408 v9fs_mount+0xba/0xcb0 fs/9p/vfs_super.c:126 legacy_get_tree+0x108/0x220 fs/fs_context.c:632 vfs_get_tree+0x8e/0x300 fs/super.c:1573 do_new_mount fs/namespace.c:3056 [inline] path_mount+0x6a6/0x1e90 fs/namespace.c:3386 do_mount fs/namespace.c:3399 [inline] __do_sys_mount fs/namespace.c:3607 [inline] __se_sys_mount fs/namespace.c:3584 [inline] __x64_sys_mount+0x283/0x300 fs/namespace.c:3584 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 This happens because of a race condition between: - The 9p client sending an invalid flush request and later cleaning it up; - The 9p client in p9_read_work() canceled all pending requests. Thread 1 Thread 2 ... p9_client_create() ... p9_fd_create() ... p9_conn_create() ... // start Thread 2 INIT_WORK(&m->rq, p9_read_work); p9_read_work() ... p9_client_rpc() ... ... p9_conn_cancel() ... spin_lock(&m->req_lock); ... p9_fd_cancelled() ... ... spin_unlock(&m->req_lock); // status rewrite p9_client_cb(m->client, req, REQ_STATUS_ERROR) // first remove list_del(&req->req_list); ... spin_lock(&m->req_lock) ... // second remove list_del(&req->req_list); spin_unlock(&m->req_lock) ... Commit 74d6a5d56629 ("9p/trans_fd: Fix concurrency del of req_list in p9_fd_cancelled/p9_read_work") fixes a concurrency issue in the 9p filesystem client where the req_list could be deleted simultaneously by both p9_read_work and p9_fd_cancelled functions, but for the case where req->status equals REQ_STATUS_RCVD. Update the check for req->status in p9_fd_cancelled to skip processing not just received requests, but anything that is not SENT, as whatever changed the state from SENT also removed the request from its list. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. [updated the check from status == RECV || status == ERROR to status != SENT] | GCVE Database | ||
| Medium | 5.7 | EPSS 0.2% | Medium5.7EPSS 0.2%GCVE DatabaseCVE-2025-40008 In the Linux kernel, the following vulnerability has been resolved: kmsan: fix out-of-bounds access to shadow memory Running sha224_kunit on a KMSAN-enabled kernel results in a crash in kmsan_internal_set_shadow_origin(): BUG: unable to handle page fault for address: ffffbc3840291000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 1810067 P4D 1810067 PUD 192d067 PMD 3c17067 PTE 0 Oops: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 81 Comm: kunit_try_catch Tainted: G N 6.17.0-rc3 #10 PREEMPT(voluntary) Tainted: [N]=TEST Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 RIP: 0010:kmsan_internal_set_shadow_origin+0x91/0x100 [...] Call Trace: <TASK> __msan_memset+0xee/0x1a0 sha224_final+0x9e/0x350 test_hash_buffer_overruns+0x46f/0x5f0 ? kmsan_get_shadow_origin_ptr+0x46/0xa0 ? __pfx_test_hash_buffer_overruns+0x10/0x10 kunit_try_run_case+0x198/0xa00 This occurs when memset() is called on a buffer that is not 4-byte aligned and extends to the end of a guard page, i.e. the next page is unmapped. The bug is that the loop at the end of kmsan_internal_set_shadow_origin() accesses the wrong shadow memory bytes when the address is not 4-byte aligned. Since each 4 bytes are associated with an origin, it rounds the address and size so that it can access all the origins that contain the buffer. However, when it checks the corresponding shadow bytes for a particular origin, it incorrectly uses the original unrounded shadow address. This results in reads from shadow memory beyond the end of the buffer's shadow memory, which crashes when that memory is not mapped. To fix this, correctly align the shadow address before accessing the 4 shadow bytes corresponding to each origin. EPSS 0.2%Vulnerability | GCVE Database | ||
| Medium | 6.8 | EPSS 0.2% | Medium6.8EPSS 0.2%GCVE DatabaseCVE-2025-40009 In the Linux kernel, the following vulnerability has been resolved: fs/proc/task_mmu: check p->vec_buf for NULL When the PAGEMAP_SCAN ioctl is invoked with vec_len = 0 reaches pagemap_scan_backout_range(), kernel panics with null-ptr-deref: [ 44.936808] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI [ 44.937797] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 44.938391] CPU: 1 UID: 0 PID: 2480 Comm: reproducer Not tainted 6.17.0-rc6 #22 PREEMPT(none) [ 44.939062] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 44.939935] RIP: 0010:pagemap_scan_thp_entry.isra.0+0x741/0xa80 <snip registers, unreliable trace> [ 44.946828] Call Trace: [ 44.947030] <TASK> [ 44.949219] pagemap_scan_pmd_entry+0xec/0xfa0 [ 44.952593] walk_pmd_range.isra.0+0x302/0x910 [ 44.954069] walk_pud_range.isra.0+0x419/0x790 [ 44.954427] walk_p4d_range+0x41e/0x620 [ 44.954743] walk_pgd_range+0x31e/0x630 [ 44.955057] __walk_page_range+0x160/0x670 [ 44.956883] walk_page_range_mm+0x408/0x980 [ 44.958677] walk_page_range+0x66/0x90 [ 44.958984] do_pagemap_scan+0x28d/0x9c0 [ 44.961833] do_pagemap_cmd+0x59/0x80 [ 44.962484] __x64_sys_ioctl+0x18d/0x210 [ 44.962804] do_syscall_64+0x5b/0x290 [ 44.963111] entry_SYSCALL_64_after_hwframe+0x76/0x7e vec_len = 0 in pagemap_scan_init_bounce_buffer() means no buffers are allocated and p->vec_buf remains set to NULL. This breaks an assumption made later in pagemap_scan_backout_range(), that page_region is always allocated for p->vec_buf_index. Fix it by explicitly checking p->vec_buf for NULL before dereferencing. Other sites that might run into same deref-issue are already (directly or transitively) protected by checking p->vec_buf. Note: From PAGEMAP_SCAN man page, it seems vec_len = 0 is valid when no output is requested and it's only the side effects caller is interested in, hence it passes check in pagemap_scan_get_args(). This issue was found by syzkaller. EPSS 0.2%Vulnerability | GCVE Database | ||
| Medium | 5.5 | EPSS 0.1% | Medium5.5EPSS 0.1%GCVE DatabaseCVE-2025-39895 In the Linux kernel, the following vulnerability has been resolved: sched: Fix sched_numa_find_nth_cpu() if mask offline sched_numa_find_nth_cpu() uses a bsearch to look for the 'closest' CPU in sched_domains_numa_masks and given cpus mask. However they might not intersect if all CPUs in the cpus mask are offline. bsearch will return NULL in that case, bail out instead of dereferencing a bogus pointer. The previous behaviour lead to this bug when using maxcpus=4 on an rk3399 (LLLLbb) (i.e. booting with all big CPUs offline): [ 1.422922] Unable to handle kernel paging request at virtual address ffffff8000000000 [ 1.423635] Mem abort info: [ 1.423889] ESR = 0x0000000096000006 [ 1.424227] EC = 0x25: DABT (current EL), IL = 32 bits [ 1.424715] SET = 0, FnV = 0 [ 1.424995] EA = 0, S1PTW = 0 [ 1.425279] FSC = 0x06: level 2 translation fault [ 1.425735] Data abort info: [ 1.425998] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000 [ 1.426499] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 1.426952] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 1.427428] swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000004a9f000 [ 1.428038] [ffffff8000000000] pgd=18000000f7fff403, p4d=18000000f7fff403, pud=18000000f7fff403, pmd=0000000000000000 [ 1.429014] Internal error: Oops: 0000000096000006 [#1] SMP [ 1.429525] Modules linked in: [ 1.429813] CPU: 3 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.17.0-rc4-dirty #343 PREEMPT [ 1.430559] Hardware name: Pine64 RockPro64 v2.1 (DT) [ 1.431012] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1.431634] pc : sched_numa_find_nth_cpu+0x2a0/0x488 [ 1.432094] lr : sched_numa_find_nth_cpu+0x284/0x488 [ 1.432543] sp : ffffffc084e1b960 [ 1.432843] x29: ffffffc084e1b960 x28: ffffff80078a8800 x27: ffffffc0846eb1d0 [ 1.433495] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 [ 1.434144] x23: 0000000000000000 x22: fffffffffff7f093 x21: ffffffc081de6378 [ 1.434792] x20: 0000000000000000 x19: 0000000ffff7f093 x18: 00000000ffffffff [ 1.435441] x17: 3030303866666666 x16: 66663d736b73616d x15: ffffffc104e1b5b7 [ 1.436091] x14: 0000000000000000 x13: ffffffc084712860 x12: 0000000000000372 [ 1.436739] x11: 0000000000000126 x10: ffffffc08476a860 x9 : ffffffc084712860 [ 1.437389] x8 : 00000000ffffefff x7 : ffffffc08476a860 x6 : 0000000000000000 [ 1.438036] x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000000 [ 1.438683] x2 : 0000000000000000 x1 : ffffffc0846eb000 x0 : ffffff8000407b68 [ 1.439332] Call trace: [ 1.439559] sched_numa_find_nth_cpu+0x2a0/0x488 (P) [ 1.440016] smp_call_function_any+0xc8/0xd0 [ 1.440416] armv8_pmu_init+0x58/0x27c [ 1.440770] armv8_cortex_a72_pmu_init+0x20/0x2c [ 1.441199] arm_pmu_device_probe+0x1e4/0x5e8 [ 1.441603] armv8_pmu_device_probe+0x1c/0x28 [ 1.442007] platform_probe+0x5c/0xac [ 1.442347] really_probe+0xbc/0x298 [ 1.442683] __driver_probe_device+0x78/0x12c [ 1.443087] driver_probe_device+0xdc/0x160 [ 1.443475] __driver_attach+0x94/0x19c [ 1.443833] bus_for_each_dev+0x74/0xd4 [ 1.444190] driver_attach+0x24/0x30 [ 1.444525] bus_add_driver+0xe4/0x208 [ 1.444874] driver_register+0x60/0x128 [ 1.445233] __platform_driver_register+0x24/0x30 [ 1.445662] armv8_pmu_driver_init+0x28/0x4c [ 1.446059] do_one_initcall+0x44/0x25c [ 1.446416] kernel_init_freeable+0x1dc/0x3bc [ 1.446820] kernel_init+0x20/0x1d8 [ 1.447151] ret_from_fork+0x10/0x20 [ 1.447493] Code: 90022e21 f000e5f5 910de2b5 2a1703e2 (f8767803) [ 1.448040] ---[ end trace 0000000000000000 ]--- [ 1.448483] note: swapper/0[1] exited with preempt_count 1 [ 1.449047] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.449741] SMP: stopping secondary CPUs [ 1.450105] Kernel Offset: disabled [ 1.450419] CPU features: 0x000000,00080000,20002001,0400421b [ ---truncated--- EPSS 0.1%Vulnerability | GCVE Database | ||
| Medium | 5.5 | EPSS 0.1% | Medium5.5EPSS 0.1%GCVE DatabaseCVE-2025-39903 In the Linux kernel, the following vulnerability has been resolved: of_numa: fix uninitialized memory nodes causing kernel panic When there are memory-only nodes (nodes without CPUs), these nodes are not properly initialized, causing kernel panic during boot. of_numa_init of_numa_parse_cpu_nodes node_set(nid, numa_nodes_parsed); of_numa_parse_memory_nodes In of_numa_parse_cpu_nodes, numa_nodes_parsed gets updated only for nodes containing CPUs. Memory-only nodes should have been updated in of_numa_parse_memory_nodes, but they weren't. Subsequently, when free_area_init() attempts to access NODE_DATA() for these uninitialized memory nodes, the kernel panics due to NULL pointer dereference. This can be reproduced on ARM64 QEMU with 1 CPU and 2 memory nodes: qemu-system-aarch64 \ -cpu host -nographic \ -m 4G -smp 1 \ -machine virt,accel=kvm,gic-version=3,iommu=smmuv3 \ -object memory-backend-ram,size=2G,id=mem0 \ -object memory-backend-ram,size=2G,id=mem1 \ -numa node,nodeid=0,memdev=mem0 \ -numa node,nodeid=1,memdev=mem1 \ -kernel $IMAGE \ -hda $DISK \ -append "console=ttyAMA0 root=/dev/vda rw earlycon" [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x481fd010] [ 0.000000] Linux version 6.17.0-rc1-00001-gabb4b3daf18c-dirty (yintirui@local) (gcc (GCC) 12.3.1, GNU ld (GNU Binutils) 2.41) #52 SMP PREEMPT Mon Aug 18 09:49:40 CST 2025 [ 0.000000] KASLR enabled [ 0.000000] random: crng init done [ 0.000000] Machine model: linux,dummy-virt [ 0.000000] efi: UEFI not found. [ 0.000000] earlycon: pl11 at MMIO 0x0000000009000000 (options '') [ 0.000000] printk: legacy bootconsole [pl11] enabled [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT [ 0.000000] NODE_DATA(0) allocated [mem 0xbfffd9c0-0xbfffffff] [ 0.000000] node 1 must be removed before remove section 23 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] node 1: [mem 0x00000000c0000000-0x000000013fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [ 0.000000] Mem abort info: [ 0.000000] ESR = 0x0000000096000004 [ 0.000000] EC = 0x25: DABT (current EL), IL = 32 bits [ 0.000000] SET = 0, FnV = 0 [ 0.000000] EA = 0, S1PTW = 0 [ 0.000000] FSC = 0x04: level 0 translation fault [ 0.000000] Data abort info: [ 0.000000] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 0.000000] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 0.000000] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 0.000000] [00000000000000a0] user address but active_mm is swapper [ 0.000000] Internal error: Oops: 0000000096000004 [#1] SMP [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.17.0-rc1-00001-g760c6dabf762-dirty #54 PREEMPT [ 0.000000] Hardware name: linux,dummy-virt (DT) [ 0.000000] pstate: 800000c5 (Nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.000000] pc : free_area_init+0x50c/0xf9c [ 0.000000] lr : free_area_init+0x5c0/0xf9c [ 0.000000] sp : ffffa02ca0f33c00 [ 0.000000] x29: ffffa02ca0f33cb0 x28: 0000000000000000 x27: 0000000000000000 [ 0.000000] x26: 4ec4ec4ec4ec4ec5 x25: 00000000000c0000 x24: 00000000000c0000 [ 0.000000] x23: 0000000000040000 x22: 0000000000000000 x21: ffffa02ca0f3b368 [ 0.000000] x20: ffffa02ca14c7b98 x19: 0000000000000000 x18: 0000000000000002 [ 0.000000] x17: 000000000000cacc x16: 0000000000000001 x15: 0000000000000001 [ 0.000000] x14: 0000000080000000 x13: 0000000000000018 x12: 0000000000000002 [ 0.0 ---truncated--- EPSS 0.1%Vulnerability | GCVE Database | ||
| Medium | 5.5 | EPSS 0.2% | Medium5.5EPSS 0.2%GCVE DatabaseCVE-2025-39879 In the Linux kernel, the following vulnerability has been resolved: ceph: always call ceph_shift_unused_folios_left() The function ceph_process_folio_batch() sets folio_batch entries to NULL, which is an illegal state. Before folio_batch_release() crashes due to this API violation, the function ceph_shift_unused_folios_left() is supposed to remove those NULLs from the array. However, since commit ce80b76dd327 ("ceph: introduce ceph_process_folio_batch() method"), this shifting doesn't happen anymore because the "for" loop got moved to ceph_process_folio_batch(), and now the `i` variable that remains in ceph_writepages_start() doesn't get incremented anymore, making the shifting effectively unreachable much of the time. Later, commit 1551ec61dc55 ("ceph: introduce ceph_submit_write() method") added more preconditions for doing the shift, replacing the `i` check (with something that is still just as broken): - if ceph_process_folio_batch() fails, shifting never happens - if ceph_move_dirty_page_in_page_array() was never called (because ceph_process_folio_batch() has returned early for some of various reasons), shifting never happens - if `processed_in_fbatch` is zero (because ceph_process_folio_batch() has returned early for some of the reasons mentioned above or because ceph_move_dirty_page_in_page_array() has failed), shifting never happens Since those two commits, any problem in ceph_process_folio_batch() could crash the kernel, e.g. this way: BUG: kernel NULL pointer dereference, address: 0000000000000034 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: Oops: 0002 [#1] SMP NOPTI CPU: 172 UID: 0 PID: 2342707 Comm: kworker/u778:8 Not tainted 6.15.10-cm4all1-es #714 NONE Hardware name: Dell Inc. PowerEdge R7615/0G9DHV, BIOS 1.6.10 12/08/2023 Workqueue: writeback wb_workfn (flush-ceph-1) RIP: 0010:folios_put_refs+0x85/0x140 Code: 83 c5 01 39 e8 7e 76 48 63 c5 49 8b 5c c4 08 b8 01 00 00 00 4d 85 ed 74 05 41 8b 44 ad 00 48 8b 15 b0 > RSP: 0018:ffffb880af8db778 EFLAGS: 00010207 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000003 RDX: ffffe377cc3b0000 RSI: 0000000000000000 RDI: ffffb880af8db8c0 RBP: 0000000000000000 R08: 000000000000007d R09: 000000000102b86f R10: 0000000000000001 R11: 00000000000000ac R12: ffffb880af8db8c0 R13: 0000000000000000 R14: 0000000000000000 R15: ffff9bd262c97000 FS: 0000000000000000(0000) GS:ffff9c8efc303000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000034 CR3: 0000000160958004 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> ceph_writepages_start+0xeb9/0x1410 The crash can be reproduced easily by changing the ceph_check_page_before_write() return value to `-E2BIG`. (Interestingly, the crash happens only if `huge_zero_folio` has already been allocated; without `huge_zero_folio`, is_huge_zero_folio(NULL) returns true and folios_put_refs() skips NULL entries instead of dereferencing them. That makes reproducing the bug somewhat unreliable. See https://lore.kernel.org/20250826231626.218675-1-max.kellermann@ionos.com for a discussion of this detail.) My suggestion is to move the ceph_shift_unused_folios_left() to right after ceph_process_folio_batch() to ensure it always gets called to fix up the illegal folio_batch state. | GCVE Database | ||
| High | 7.1 | EPSS 0.2% | CVE-2025-39883Linux kernel · mm/memory-failure: fix VM_BUG_ON_PAGE(PagePoisoned(page)) when unpoison memory High7.1EPSS 0.2%GCVE DatabaseCVE-2025-39883 In the Linux kernel, the following vulnerability has been resolved: mm/memory-failure: fix VM_BUG_ON_PAGE(PagePoisoned(page)) when unpoison memory When I did memory failure tests, below panic occurs: page dumped because: VM_BUG_ON_PAGE(PagePoisoned(page)) kernel BUG at include/linux/page-flags.h:616! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 720 Comm: bash Not tainted 6.10.0-rc1-00195-g148743902568 #40 RIP: 0010:unpoison_memory+0x2f3/0x590 RSP: 0018:ffffa57fc8787d60 EFLAGS: 00000246 RAX: 0000000000000037 RBX: 0000000000000009 RCX: ffff9be25fcdc9c8 RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff9be25fcdc9c0 RBP: 0000000000300000 R08: ffffffffb4956f88 R09: 0000000000009ffb R10: 0000000000000284 R11: ffffffffb4926fa0 R12: ffffe6b00c000000 R13: ffff9bdb453dfd00 R14: 0000000000000000 R15: fffffffffffffffe FS: 00007f08f04e4740(0000) GS:ffff9be25fcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000564787a30410 CR3: 000000010d4e2000 CR4: 00000000000006f0 Call Trace: <TASK> unpoison_memory+0x2f3/0x590 simple_attr_write_xsigned.constprop.0.isra.0+0xb3/0x110 debugfs_attr_write+0x42/0x60 full_proxy_write+0x5b/0x80 vfs_write+0xd5/0x540 ksys_write+0x64/0xe0 do_syscall_64+0xb9/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f08f0314887 RSP: 002b:00007ffece710078 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000009 RCX: 00007f08f0314887 RDX: 0000000000000009 RSI: 0000564787a30410 RDI: 0000000000000001 RBP: 0000564787a30410 R08: 000000000000fefe R09: 000000007fffffff R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000009 R13: 00007f08f041b780 R14: 00007f08f0417600 R15: 00007f08f0416a00 </TASK> Modules linked in: hwpoison_inject ---[ end trace 0000000000000000 ]--- RIP: 0010:unpoison_memory+0x2f3/0x590 RSP: 0018:ffffa57fc8787d60 EFLAGS: 00000246 RAX: 0000000000000037 RBX: 0000000000000009 RCX: ffff9be25fcdc9c8 RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff9be25fcdc9c0 RBP: 0000000000300000 R08: ffffffffb4956f88 R09: 0000000000009ffb R10: 0000000000000284 R11: ffffffffb4926fa0 R12: ffffe6b00c000000 R13: ffff9bdb453dfd00 R14: 0000000000000000 R15: fffffffffffffffe FS: 00007f08f04e4740(0000) GS:ffff9be25fcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000564787a30410 CR3: 000000010d4e2000 CR4: 00000000000006f0 Kernel panic - not syncing: Fatal exception Kernel Offset: 0x31c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]--- The root cause is that unpoison_memory() tries to check the PG_HWPoison flags of an uninitialized page. So VM_BUG_ON_PAGE(PagePoisoned(page)) is triggered. This can be reproduced by below steps: 1.Offline memory block: echo offline > /sys/devices/system/memory/memory12/state 2.Get offlined memory pfn: page-types -b n -rlN 3.Write pfn to unpoison-pfn echo <pfn> > /sys/kernel/debug/hwpoison/unpoison-pfn This scenario can be identified by pfn_to_online_page() returning NULL. And ZONE_DEVICE pages are never expected, so we can simply fail if pfn_to_online_page() == NULL to fix the bug. EPSS 0.2%Vulnerability | GCVE Database | ||
| Medium | 5.5 | EPSS 0.1% | Medium5.5EPSS 0.1%GCVE DatabaseCVE-2025-39844 In the Linux kernel, the following vulnerability has been resolved: mm: move page table sync declarations to linux/pgtable.h During our internal testing, we started observing intermittent boot failures when the machine uses 4-level paging and has a large amount of persistent memory: BUG: unable to handle page fault for address: ffffe70000000034 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI RIP: 0010:__init_single_page+0x9/0x6d Call Trace: <TASK> __init_zone_device_page+0x17/0x5d memmap_init_zone_device+0x154/0x1bb pagemap_range+0x2e0/0x40f memremap_pages+0x10b/0x2f0 devm_memremap_pages+0x1e/0x60 dev_dax_probe+0xce/0x2ec [device_dax] dax_bus_probe+0x6d/0xc9 [... snip ...] </TASK> It turns out that the kernel panics while initializing vmemmap (struct page array) when the vmemmap region spans two PGD entries, because the new PGD entry is only installed in init_mm.pgd, but not in the page tables of other tasks. And looking at __populate_section_memmap(): if (vmemmap_can_optimize(altmap, pgmap)) // does not sync top level page tables r = vmemmap_populate_compound_pages(pfn, start, end, nid, pgmap); else // sync top level page tables in x86 r = vmemmap_populate(start, end, nid, altmap); In the normal path, vmemmap_populate() in arch/x86/mm/init_64.c synchronizes the top level page table (See commit 9b861528a801 ("x86-64, mem: Update all PGDs for direct mapping and vmemmap mapping changes")) so that all tasks in the system can see the new vmemmap area. However, when vmemmap_can_optimize() returns true, the optimized path skips synchronization of top-level page tables. This is because vmemmap_populate_compound_pages() is implemented in core MM code, which does not handle synchronization of the top-level page tables. Instead, the core MM has historically relied on each architecture to perform this synchronization manually. We're not the first party to encounter a crash caused by not-sync'd top level page tables: earlier this year, Gwan-gyeong Mun attempted to address the issue [1] [2] after hitting a kernel panic when x86 code accessed the vmemmap area before the corresponding top-level entries were synced. At that time, the issue was believed to be triggered only when struct page was enlarged for debugging purposes, and the patch did not get further updates. It turns out that current approach of relying on each arch to handle the page table sync manually is fragile because 1) it's easy to forget to sync the top level page table, and 2) it's also easy to overlook that the kernel should not access the vmemmap and direct mapping areas before the sync. # The solution: Make page table sync more code robust and harder to miss To address this, Dave Hansen suggested [3] [4] introducing {pgd,p4d}_populate_kernel() for updating kernel portion of the page tables and allow each architecture to explicitly perform synchronization when installing top-level entries. With this approach, we no longer need to worry about missing the sync step, reducing the risk of future regressions. The new interface reuses existing ARCH_PAGE_TABLE_SYNC_MASK, PGTBL_P*D_MODIFIED and arch_sync_kernel_mappings() facility used by vmalloc and ioremap to synchronize page tables. pgd_populate_kernel() looks like this: static inline void pgd_populate_kernel(unsigned long addr, pgd_t *pgd, p4d_t *p4d) { pgd_populate(&init_mm, pgd, p4d); if (ARCH_PAGE_TABLE_SYNC_MASK & PGTBL_PGD_MODIFIED) arch_sync_kernel_mappings(addr, addr); } It is worth noting that vmalloc() and apply_to_range() carefully synchronizes page tables by calling p*d_alloc_track() and arch_sync_kernel_mappings(), and thus they are not affected by ---truncated--- EPSS 0.1%Vulnerability | GCVE Database | ||
| Critical | 9.8 | EPSS 0.4% | Critical9.8EPSS 0.4%GCVE DatabaseCVE-2025-39703 In the Linux kernel, the following vulnerability has been resolved: net, hsr: reject HSR frame if skb can't hold tag Receiving HSR frame with insufficient space to hold HSR tag in the skb can result in a crash (kernel BUG): [ 45.390915] skbuff: skb_under_panic: text:ffffffff86f32cac len:26 put:14 head:ffff888042418000 data:ffff888042417ff4 tail:0xe end:0x180 dev:bridge_slave_1 [ 45.392559] ------------[ cut here ]------------ [ 45.392912] kernel BUG at net/core/skbuff.c:211! [ 45.393276] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI [ 45.393809] CPU: 1 UID: 0 PID: 2496 Comm: reproducer Not tainted 6.15.0 #12 PREEMPT(undef) [ 45.394433] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 45.395273] RIP: 0010:skb_panic+0x15b/0x1d0 <snip registers, remove unreliable trace> [ 45.402911] Call Trace: [ 45.403105] <IRQ> [ 45.404470] skb_push+0xcd/0xf0 [ 45.404726] br_dev_queue_push_xmit+0x7c/0x6c0 [ 45.406513] br_forward_finish+0x128/0x260 [ 45.408483] __br_forward+0x42d/0x590 [ 45.409464] maybe_deliver+0x2eb/0x420 [ 45.409763] br_flood+0x174/0x4a0 [ 45.410030] br_handle_frame_finish+0xc7c/0x1bc0 [ 45.411618] br_handle_frame+0xac3/0x1230 [ 45.413674] __netif_receive_skb_core.constprop.0+0x808/0x3df0 [ 45.422966] __netif_receive_skb_one_core+0xb4/0x1f0 [ 45.424478] __netif_receive_skb+0x22/0x170 [ 45.424806] process_backlog+0x242/0x6d0 [ 45.425116] __napi_poll+0xbb/0x630 [ 45.425394] net_rx_action+0x4d1/0xcc0 [ 45.427613] handle_softirqs+0x1a4/0x580 [ 45.427926] do_softirq+0x74/0x90 [ 45.428196] </IRQ> This issue was found by syzkaller. The panic happens in br_dev_queue_push_xmit() once it receives a corrupted skb with ETH header already pushed in linear data. When it attempts the skb_push() call, there's not enough headroom and skb_push() panics. The corrupted skb is put on the queue by HSR layer, which makes a sequence of unintended transformations when it receives a specific corrupted HSR frame (with incomplete TAG). Fix it by dropping and consuming frames that are not long enough to contain both ethernet and hsr headers. Alternative fix would be to check for enough headroom before skb_push() in br_dev_queue_push_xmit(). In the reproducer, this is injected via AF_PACKET, but I don't easily see why it couldn't be sent over the wire from adjacent network. Further Details: In the reproducer, the following network interface chain is set up: ┌────────────────┐ ┌────────────────┐ │ veth0_to_hsr ├───┤ hsr_slave0 ┼───┐ └────────────────┘ └────────────────┘ │ │ ┌──────┐ ├─┤ hsr0 ├───┐ │ └──────┘ │ ┌────────────────┐ ┌────────────────┐ │ │┌────────┐ │ veth1_to_hsr ┼───┤ hsr_slave1 ├───┘ └┤ │ └────────────────┘ └────────────────┘ ┌┼ bridge │ ││ │ │└────────┘ │ ┌───────┐ │ │ ... ├──────┘ └───────┘ To trigger the events leading up to crash, reproducer sends a corrupted HSR fr ---truncated--- EPSS 0.4%Vulnerability | GCVE Database | ||
| High | 8.8 | EPSS 0.3% | CVE-2025-26438Google Android · Elevation of Privilege High8.8EPSS 0.3%CVE Database V5CVE-2025-26438 In smp_process_secure_connection_oob_data of smp_act.cc, there is a possible way to bypass SMP authentication due to Incorrect implementation of a protocol. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. | CVE Database V5 | ||
| High | 5.5 | EPSS 0.2% | CVE-2025-38557Linux kernel · HID: apple: validate feature-report field count to prevent NULL pointer dereference High5.5EPSS 0.2%GCVE DatabaseCVE-2025-38557 In the Linux kernel, the following vulnerability has been resolved: HID: apple: validate feature-report field count to prevent NULL pointer dereference A malicious HID device with quirk APPLE_MAGIC_BACKLIGHT can trigger a NULL pointer dereference whilst the power feature-report is toggled and sent to the device in apple_magic_backlight_report_set(). The power feature-report is expected to have two data fields, but if the descriptor declares one field then accessing field[1] and dereferencing it in apple_magic_backlight_report_set() becomes invalid since field[1] will be NULL. An example of a minimal descriptor which can cause the crash is something like the following where the report with ID 3 (power report) only references a single 1-byte field. When hid core parses the descriptor it will encounter the final feature tag, allocate a hid_report (all members of field[] will be zeroed out), create field structure and populate it, increasing the maxfield to 1. The subsequent field[1] access and dereference causes the crash. Usage Page (Vendor Defined 0xFF00) Usage (0x0F) Collection (Application) Report ID (1) Usage (0x01) Logical Minimum (0) Logical Maximum (255) Report Size (8) Report Count (1) Feature (Data,Var,Abs) Usage (0x02) Logical Maximum (32767) Report Size (16) Report Count (1) Feature (Data,Var,Abs) Report ID (3) Usage (0x03) Logical Minimum (0) Logical Maximum (1) Report Size (8) Report Count (1) Feature (Data,Var,Abs) End Collection Here we see the KASAN splat when the kernel dereferences the NULL pointer and crashes: [ 15.164723] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] SMP KASAN NOPTI [ 15.165691] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] [ 15.165691] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.15.0 #31 PREEMPT(voluntary) [ 15.165691] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 [ 15.165691] RIP: 0010:apple_magic_backlight_report_set+0xbf/0x210 [ 15.165691] Call Trace: [ 15.165691] <TASK> [ 15.165691] apple_probe+0x571/0xa20 [ 15.165691] hid_device_probe+0x2e2/0x6f0 [ 15.165691] really_probe+0x1ca/0x5c0 [ 15.165691] __driver_probe_device+0x24f/0x310 [ 15.165691] driver_probe_device+0x4a/0xd0 [ 15.165691] __device_attach_driver+0x169/0x220 [ 15.165691] bus_for_each_drv+0x118/0x1b0 [ 15.165691] __device_attach+0x1d5/0x380 [ 15.165691] device_initial_probe+0x12/0x20 [ 15.165691] bus_probe_device+0x13d/0x180 [ 15.165691] device_add+0xd87/0x1510 [...] To fix this issue we should validate the number of fields that the backlight and power reports have and if they do not have the required number of fields then bail. | GCVE Database | ||
| High | 7.8 | EPSS 0.2% | CVE-2025-38532Linux kernel · net: libwx: properly reset High7.8EPSS 0.2%GCVE DatabaseCVE-2025-38532 In the Linux kernel, the following vulnerability has been resolved: net: libwx: properly reset Rx ring descriptor When device reset is triggered by feature changes such as toggling Rx VLAN offload, wx->do_reset() is called to reinitialize Rx rings. The hardware descriptor ring may retain stale values from previous sessions. And only set the length to 0 in rx_desc[0] would result in building malformed SKBs. Fix it to ensure a clean slate after device reset. [ 549.186435] [ C16] ------------[ cut here ]------------ [ 549.186457] [ C16] kernel BUG at net/core/skbuff.c:2814! [ 549.186468] [ C16] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 549.186472] [ C16] CPU: 16 UID: 0 PID: 0 Comm: swapper/16 Kdump: loaded Not tainted 6.16.0-rc4+ #23 PREEMPT(voluntary) [ 549.186476] [ C16] Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024 [ 549.186478] [ C16] RIP: 0010:__pskb_pull_tail+0x3ff/0x510 [ 549.186484] [ C16] Code: 06 f0 ff 4f 34 74 7b 4d 8b 8c 24 c8 00 00 00 45 8b 84 24 c0 00 00 00 e9 c8 fd ff ff 48 c7 44 24 08 00 00 00 00 e9 5e fe ff ff <0f> 0b 31 c0 e9 23 90 5b ff 41 f7 c6 ff 0f 00 00 75 bf 49 8b 06 a8 [ 549.186487] [ C16] RSP: 0018:ffffb391c0640d70 EFLAGS: 00010282 [ 549.186490] [ C16] RAX: 00000000fffffff2 RBX: ffff8fe7e4d40200 RCX: 00000000fffffff2 [ 549.186492] [ C16] RDX: ffff8fe7c3a4bf8e RSI: 0000000000000180 RDI: ffff8fe7c3a4bf40 [ 549.186494] [ C16] RBP: ffffb391c0640da8 R08: ffff8fe7c3a4c0c0 R09: 000000000000000e [ 549.186496] [ C16] R10: ffffb391c0640d88 R11: 000000000000000e R12: ffff8fe7e4d40200 [ 549.186497] [ C16] R13: 00000000fffffff2 R14: ffff8fe7fa01a000 R15: 00000000fffffff2 [ 549.186499] [ C16] FS: 0000000000000000(0000) GS:ffff8fef5ae40000(0000) knlGS:0000000000000000 [ 549.186502] [ C16] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 549.186503] [ C16] CR2: 00007f77d81d6000 CR3: 000000051a032000 CR4: 0000000000750ef0 [ 549.186505] [ C16] PKRU: 55555554 [ 549.186507] [ C16] Call Trace: [ 549.186510] [ C16] <IRQ> [ 549.186513] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186517] [ C16] __skb_pad+0xc7/0xf0 [ 549.186523] [ C16] wx_clean_rx_irq+0x355/0x3b0 [libwx] [ 549.186533] [ C16] wx_poll+0x92/0x120 [libwx] [ 549.186540] [ C16] __napi_poll+0x28/0x190 [ 549.186544] [ C16] net_rx_action+0x301/0x3f0 [ 549.186548] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186551] [ C16] ? __raw_spin_lock_irqsave+0x1e/0x50 [ 549.186554] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186557] [ C16] ? wake_up_nohz_cpu+0x35/0x160 [ 549.186559] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186563] [ C16] handle_softirqs+0xf9/0x2c0 [ 549.186568] [ C16] __irq_exit_rcu+0xc7/0x130 [ 549.186572] [ C16] common_interrupt+0xb8/0xd0 [ 549.186576] [ C16] </IRQ> [ 549.186577] [ C16] <TASK> [ 549.186579] [ C16] asm_common_interrupt+0x22/0x40 [ 549.186582] [ C16] RIP: 0010:cpuidle_enter_state+0xc2/0x420 [ 549.186585] [ C16] Code: 00 00 e8 11 0e 5e ff e8 ac f0 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 0d ed 5c ff 45 84 ff 0f 85 40 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 84 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d [ 549.186587] [ C16] RSP: 0018:ffffb391c0277e78 EFLAGS: 00000246 [ 549.186590] [ C16] RAX: ffff8fef5ae40000 RBX: 0000000000000003 RCX: 0000000000000000 [ 549.186591] [ C16] RDX: 0000007fde0faac5 RSI: ffffffff826e53f6 RDI: ffffffff826fa9b3 [ 549.186593] [ C16] RBP: ffff8fe7c3a20800 R08: 0000000000000002 R09: 0000000000000000 [ 549.186595] [ C16] R10: 0000000000000000 R11: 000000000000ffff R12: ffffffff82ed7a40 [ 549.186596] [ C16] R13: 0000007fde0faac5 R14: 0000000000000003 R15: 0000000000000000 [ 549.186601] [ C16] ? cpuidle_enter_state+0xb3/0x420 [ 549.186605] [ C16] cpuidle_en ---truncated--- EPSS 0.2%Vulnerability | GCVE Database | ||
| Medium | 5.5 | EPSS 0.2% | CVE-2025-38517Linux kernel · lib/alloc_tag: do not acquire non-existent lock in alloc_tag_top_users() Medium5.5EPSS 0.2%GCVE DatabaseCVE-2025-38517 In the Linux kernel, the following vulnerability has been resolved: lib/alloc_tag: do not acquire non-existent lock in alloc_tag_top_users() alloc_tag_top_users() attempts to lock alloc_tag_cttype->mod_lock even when the alloc_tag_cttype is not allocated because: 1) alloc tagging is disabled because mem profiling is disabled (!alloc_tag_cttype) 2) alloc tagging is enabled, but not yet initialized (!alloc_tag_cttype) 3) alloc tagging is enabled, but failed initialization (!alloc_tag_cttype or IS_ERR(alloc_tag_cttype)) In all cases, alloc_tag_cttype is not allocated, and therefore alloc_tag_top_users() should not attempt to acquire the semaphore. This leads to a crash on memory allocation failure by attempting to acquire a non-existent semaphore: Oops: general protection fault, probably for non-canonical address 0xdffffc000000001b: 0000 [#3] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x00000000000000d8-0x00000000000000df] CPU: 2 UID: 0 PID: 1 Comm: systemd Tainted: G D 6.16.0-rc2 #1 VOLUNTARY Tainted: [D]=DIE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:down_read_trylock+0xaa/0x3b0 Code: d0 7c 08 84 d2 0f 85 a0 02 00 00 8b 0d df 31 dd 04 85 c9 75 29 48 b8 00 00 00 00 00 fc ff df 48 8d 6b 68 48 89 ea 48 c1 ea 03 <80> 3c 02 00 0f 85 88 02 00 00 48 3b 5b 68 0f 85 53 01 00 00 65 ff RSP: 0000:ffff8881002ce9b8 EFLAGS: 00010016 RAX: dffffc0000000000 RBX: 0000000000000070 RCX: 0000000000000000 RDX: 000000000000001b RSI: 000000000000000a RDI: 0000000000000070 RBP: 00000000000000d8 R08: 0000000000000001 R09: ffffed107dde49d1 R10: ffff8883eef24e8b R11: ffff8881002cec20 R12: 1ffff11020059d37 R13: 00000000003fff7b R14: ffff8881002cec20 R15: dffffc0000000000 FS: 00007f963f21d940(0000) GS:ffff888458ca6000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f963f5edf71 CR3: 000000010672c000 CR4: 0000000000350ef0 Call Trace: <TASK> codetag_trylock_module_list+0xd/0x20 alloc_tag_top_users+0x369/0x4b0 __show_mem+0x1cd/0x6e0 warn_alloc+0x2b1/0x390 __alloc_frozen_pages_noprof+0x12b9/0x21a0 alloc_pages_mpol+0x135/0x3e0 alloc_slab_page+0x82/0xe0 new_slab+0x212/0x240 ___slab_alloc+0x82a/0xe00 </TASK> As David Wang points out, this issue became easier to trigger after commit 780138b12381 ("alloc_tag: check mem_profiling_support in alloc_tag_init"). Before the commit, the issue occurred only when it failed to allocate and initialize alloc_tag_cttype or if a memory allocation fails before alloc_tag_init() is called. After the commit, it can be easily triggered when memory profiling is compiled but disabled at boot. To properly determine whether alloc_tag_init() has been called and its data structures initialized, verify that alloc_tag_cttype is a valid pointer before acquiring the semaphore. If the variable is NULL or an error value, it has not been properly initialized. In such a case, just skip and do not attempt to acquire the semaphore. [harry.yoo@oracle.com: v3] EPSS 0.2%Vulnerability | GCVE Database | ||
| High | 7.8 | EPSS 0.2% | CVE-2025-38470Linux kernel · net: vlan: fix VLAN 0 refcount imbalance of toggling filtering during runtime High7.8EPSS 0.2%GCVE DatabaseCVE-2025-38470 In the Linux kernel, the following vulnerability has been resolved: net: vlan: fix VLAN 0 refcount imbalance of toggling filtering during runtime Assuming the "rx-vlan-filter" feature is enabled on a net device, the 8021q module will automatically add or remove VLAN 0 when the net device is put administratively up or down, respectively. There are a couple of problems with the above scheme. The first problem is a memory leak that can happen if the "rx-vlan-filter" feature is disabled while the device is running: # ip link add bond1 up type bond mode 0 # ethtool -K bond1 rx-vlan-filter off # ip link del dev bond1 When the device is put administratively down the "rx-vlan-filter" feature is disabled, so the 8021q module will not remove VLAN 0 and the memory will be leaked [1]. Another problem that can happen is that the kernel can automatically delete VLAN 0 when the device is put administratively down despite not adding it when the device was put administratively up since during that time the "rx-vlan-filter" feature was disabled. null-ptr-unref or bug_on[2] will be triggered by unregister_vlan_dev() for refcount imbalance if toggling filtering during runtime: $ ip link add bond0 type bond mode 0 $ ip link add link bond0 name vlan0 type vlan id 0 protocol 802.1q $ ethtool -K bond0 rx-vlan-filter off $ ifconfig bond0 up $ ethtool -K bond0 rx-vlan-filter on $ ifconfig bond0 down $ ip link del vlan0 Root cause is as below: step1: add vlan0 for real_dev, such as bond, team. register_vlan_dev vlan_vid_add(real_dev,htons(ETH_P_8021Q),0) //refcnt=1 step2: disable vlan filter feature and enable real_dev step3: change filter from 0 to 1 vlan_device_event vlan_filter_push_vids ndo_vlan_rx_add_vid //No refcnt added to real_dev vlan0 step4: real_dev down vlan_device_event vlan_vid_del(dev, htons(ETH_P_8021Q), 0); //refcnt=0 vlan_info_rcu_free //free vlan0 step5: delete vlan0 unregister_vlan_dev BUG_ON(!vlan_info); //vlan_info is null Fix both problems by noting in the VLAN info whether VLAN 0 was automatically added upon NETDEV_UP and based on that decide whether it should be deleted upon NETDEV_DOWN, regardless of the state of the "rx-vlan-filter" feature. [1] unreferenced object 0xffff8880068e3100 (size 256): comm "ip", pid 384, jiffies 4296130254 hex dump (first 32 bytes): 00 20 30 0d 80 88 ff ff 00 00 00 00 00 00 00 00 . 0............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 81ce31fa): __kmalloc_cache_noprof+0x2b5/0x340 vlan_vid_add+0x434/0x940 vlan_device_event.cold+0x75/0xa8 notifier_call_chain+0xca/0x150 __dev_notify_flags+0xe3/0x250 rtnl_configure_link+0x193/0x260 rtnl_newlink_create+0x383/0x8e0 __rtnl_newlink+0x22c/0xa40 rtnl_newlink+0x627/0xb00 rtnetlink_rcv_msg+0x6fb/0xb70 netlink_rcv_skb+0x11f/0x350 netlink_unicast+0x426/0x710 netlink_sendmsg+0x75a/0xc20 __sock_sendmsg+0xc1/0x150 ____sys_sendmsg+0x5aa/0x7b0 ___sys_sendmsg+0xfc/0x180 [2] kernel BUG at net/8021q/vlan.c:99! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 0 UID: 0 PID: 382 Comm: ip Not tainted 6.16.0-rc3 #61 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:unregister_vlan_dev (net/8021q/vlan.c:99 (discriminator 1)) RSP: 0018:ffff88810badf310 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88810da84000 RCX: ffffffffb47ceb9a RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88810e8b43c8 RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff6cefe80 R10: ffffffffb677f407 R11: ffff88810badf3c0 R12: ffff88810e8b4000 R13: 0000000000000000 R14: ffff88810642a5c0 R15: 000000000000017e FS: 00007f1ff68c20c0(0000) GS:ffff888163a24000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1ff5dad240 CR3: 0000000107e56000 CR4: 00000000000006f0 Call Trace: <TASK ---truncated--- EPSS 0.2%Vulnerability | GCVE Database | ||
| High | 7.8 | EPSS 0.2% | CVE-2025-38455Linux kernel · KVM: SVM: Reject SEV{-ES} intra host migration if vCPU creation is in-flight High7.8EPSS 0.2%GCVE DatabaseCVE-2025-38455 In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Reject SEV{-ES} intra host migration if vCPU creation is in-flight Reject migration of SEV{-ES} state if either the source or destination VM is actively creating a vCPU, i.e. if kvm_vm_ioctl_create_vcpu() is in the section between incrementing created_vcpus and online_vcpus. The bulk of vCPU creation runs _outside_ of kvm->lock to allow creating multiple vCPUs in parallel, and so sev_info.es_active can get toggled from false=>true in the destination VM after (or during) svm_vcpu_create(), resulting in an SEV{-ES} VM effectively having a non-SEV{-ES} vCPU. The issue manifests most visibly as a crash when trying to free a vCPU's NULL VMSA page in an SEV-ES VM, but any number of things can go wrong. BUG: unable to handle page fault for address: ffffebde00000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP KASAN NOPTI CPU: 227 UID: 0 PID: 64063 Comm: syz.5.60023 Tainted: G U O 6.15.0-smp-DEV #2 NONE Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.52.0-0 10/28/2024 RIP: 0010:constant_test_bit arch/x86/include/asm/bitops.h:206 [inline] RIP: 0010:arch_test_bit arch/x86/include/asm/bitops.h:238 [inline] RIP: 0010:_test_bit include/asm-generic/bitops/instrumented-non-atomic.h:142 [inline] RIP: 0010:PageHead include/linux/page-flags.h:866 [inline] RIP: 0010:___free_pages+0x3e/0x120 mm/page_alloc.c:5067 Code: <49> f7 06 40 00 00 00 75 05 45 31 ff eb 0c 66 90 4c 89 f0 4c 39 f0 RSP: 0018:ffff8984551978d0 EFLAGS: 00010246 RAX: 0000777f80000001 RBX: 0000000000000000 RCX: ffffffff918aeb98 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffebde00000000 RBP: 0000000000000000 R08: ffffebde00000007 R09: 1ffffd7bc0000000 R10: dffffc0000000000 R11: fffff97bc0000001 R12: dffffc0000000000 R13: ffff8983e19751a8 R14: ffffebde00000000 R15: 1ffffd7bc0000000 FS: 0000000000000000(0000) GS:ffff89ee661d3000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffebde00000000 CR3: 000000793ceaa000 CR4: 0000000000350ef0 DR0: 0000000000000000 DR1: 0000000000000b5f DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: <TASK> sev_free_vcpu+0x413/0x630 arch/x86/kvm/svm/sev.c:3169 svm_vcpu_free+0x13a/0x2a0 arch/x86/kvm/svm/svm.c:1515 kvm_arch_vcpu_destroy+0x6a/0x1d0 arch/x86/kvm/x86.c:12396 kvm_vcpu_destroy virt/kvm/kvm_main.c:470 [inline] kvm_destroy_vcpus+0xd1/0x300 virt/kvm/kvm_main.c:490 kvm_arch_destroy_vm+0x636/0x820 arch/x86/kvm/x86.c:12895 kvm_put_kvm+0xb8e/0xfb0 virt/kvm/kvm_main.c:1310 kvm_vm_release+0x48/0x60 virt/kvm/kvm_main.c:1369 __fput+0x3e4/0x9e0 fs/file_table.c:465 task_work_run+0x1a9/0x220 kernel/task_work.c:227 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0x7f0/0x25b0 kernel/exit.c:953 do_group_exit+0x203/0x2d0 kernel/exit.c:1102 get_signal+0x1357/0x1480 kernel/signal.c:3034 arch_do_signal_or_restart+0x40/0x690 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop kernel/entry/common.c:111 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x67/0xb0 kernel/entry/common.c:218 do_syscall_64+0x7c/0x150 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f87a898e969 </TASK> Modules linked in: gq(O) gsmi: Log Shutdown Reason 0x03 CR2: ffffebde00000000 ---[ end trace 0000000000000000 ]--- Deliberately don't check for a NULL VMSA when freeing the vCPU, as crashing the host is likely desirable due to the VMSA being consumed by hardware. E.g. if KVM manages to allow VMRUN on the vCPU, hardware may read/write a bogus VMSA page. Accessing P ---truncated--- EPSS 0.2%Vulnerability | GCVE Database | ||
| High | 7.8 | EPSS 0.2% | High7.8EPSS 0.2%GCVE DatabaseCVE-2025-38459 In the Linux kernel, the following vulnerability has been resolved: atm: clip: Fix infinite recursive call of clip_push(). syzbot reported the splat below. [0] This happens if we call ioctl(ATMARP_MKIP) more than once. During the first call, clip_mkip() sets clip_push() to vcc->push(), and the second call copies it to clip_vcc->old_push(). Later, when the socket is close()d, vcc_destroy_socket() passes NULL skb to clip_push(), which calls clip_vcc->old_push(), triggering the infinite recursion. Let's prevent the second ioctl(ATMARP_MKIP) by checking vcc->user_back, which is allocated by the first call as clip_vcc. Note also that we use lock_sock() to prevent racy calls. [0]: BUG: TASK stack guard page was hit at ffffc9000d66fff8 (stack is ffffc9000d670000..ffffc9000d678000) Oops: stack guard page: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 5322 Comm: syz.0.0 Not tainted 6.16.0-rc4-syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:clip_push+0x5/0x720 net/atm/clip.c:191 Code: e0 8f aa 8c e8 1c ad 5b fa eb ae 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 55 <41> 57 41 56 41 55 41 54 53 48 83 ec 20 48 89 f3 49 89 fd 48 bd 00 RSP: 0018:ffffc9000d670000 EFLAGS: 00010246 RAX: 1ffff1100235a4a5 RBX: ffff888011ad2508 RCX: ffff8880003c0000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888037f01000 RBP: dffffc0000000000 R08: ffffffff8fa104f7 R09: 1ffffffff1f4209e R10: dffffc0000000000 R11: ffffffff8a99b300 R12: ffffffff8a99b300 R13: ffff888037f01000 R14: ffff888011ad2500 R15: ffff888037f01578 FS: 000055557ab6d500(0000) GS:ffff88808d250000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000d66fff8 CR3: 0000000043172000 CR4: 0000000000352ef0 Call Trace: <TASK> clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 ... clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 vcc_destroy_socket net/atm/common.c:183 [inline] vcc_release+0x157/0x460 net/atm/common.c:205 __sock_release net/socket.c:647 [inline] sock_close+0xc0/0x240 net/socket.c:1391 __fput+0x449/0xa70 fs/file_table.c:465 task_work_run+0x1d1/0x260 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop+0xec/0x110 kernel/entry/common.c:114 exit_to_user_mode_prepare include/linux/entry-common.h:330 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:414 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:449 [inline] do_syscall_64+0x2bd/0x3b0 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ff31c98e929 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fffb5aa1f78 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4 RAX: 0000000000000000 RBX: 0000000000012747 RCX: 00007ff31c98e929 RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003 RBP: 00007ff31cbb7ba0 R08: 0000000000000001 R09: 0000000db5aa226f R10: 00007ff31c7ff030 R11: 0000000000000246 R12: 00007ff31cbb608c R13: 00007ff31cbb6080 R14: ffffffffffffffff R15: 00007fffb5aa2090 </TASK> Modules linked in: EPSS 0.2%Vulnerability | GCVE Database | ||
| Medium | 5.5 | EPSS 0.2% | Medium5.5EPSS 0.2%GCVE DatabaseCVE-2025-38407 CVE-2025-38407 is a vulnerability in the Linux kernel's RISC-V architecture support related to the handling of per-CPU boot data when NUMA is enabled. The issue arises because the function sbi_hsm_hart_start() assumes a physical address translation that is invalid when percpu data is allocated in the vmalloc area, causing secondary CPUs (harts) to hang during boot. This was fixed by changing the boot_data allocation to a static array within the kernel image, preventing invalid address access and enabling successful SMP boot on affected hardware. | GCVE Database |
Page 4 of 6 · 1 duplicate CVE record merged