Threats affecting pkg:bitnami/sqlite

OffSeq Mirage honeypot sensors observed this SHA-256 file hash 4 time(s) in attacker activity between 2026-10-26 and 2026-10-26. Observed technique: T1105 (Ingress Tool Transfer). Seen from attacker infrastructure in PS. File hashes fingerprint a specific malicious payload (a dropper, web shell, miner, or post-exploitation tool) that was staged or delivered during the attack. Match it against files in your environment and your EDR/AV and threat-intel feeds.

OffSeq Mirage honeypot sensors observed this SHA-256 file hash 5 time(s) in attacker activity between 2026-10-26 and 2026-10-26. Associated with CVE-2026-109618. Observed technique: T1105 (Ingress Tool Transfer). Seen from attacker infrastructure in PS. File hashes fingerprint a specific malicious payload (a dropper, web shell, miner, or post-exploitation tool) that was staged or delivered during the attack. Match it against files in your environment and your EDR/AV and threat-intel feeds.

The PHP2Shell vulnerabilities (CVE-2026-109618 and CVE-2026-109619) are critical flaws in the PHP engine allowing unauthenticated remote code execution. Multiple industrial vendors including Siemens, Schneider Electric, ABB, and others have confirmed that some of their products are affected. Patches for PHP were released on October 21, 2026, shortly after exploitation attempts began. Several vendors have released or are preparing patches for affected products, while some continue to assess impact or provide mitigations. The vulnerabilities have been actively targeted in the wild, with millions of exploitation attempts reported and confirmed attacks on honeypots.

CVE-2026-99099 addresses a vulnerability in the Linux kernel related to AMD processors where the processor may fail to invalidate a TLB entry when executing an INVLPGB/TLBSYNC instruction pair. This issue is known as AMD TLBI Erratum #1718. The Linux kernel has implemented a software workaround to detect this erratum and mitigate it when a microcode fix is not available.

A buffer overflow vulnerability in the Linux kernel's dm-integrity inline mode with large tag sizes has been fixed. The issue occurs because the checksum computation uses an on-stack buffer smaller than the tag size, causing an overflow when the tag size exceeds the buffer size. This overflow can cause kernel panics with stack protection enabled. The vulnerability requires root privileges to trigger and is not considered a security bug. Fixes have been applied in recent kernel commits.

A vulnerability in the Linux kernel's tee subsystem allows zero-sized allocations in tee_dyn_shm_alloc_helper(), leading to a kernel allocation failure and potential boot panic on systems with panic_on_warn enabled. This occurs because the function does not check for zero size before calling alloc_pages_exact(), which results in an invalid page order. The issue is triggered via TEE_IOC_SHM_ALLOC with a zero size parameter and has been fixed in specific commits.

A vulnerability in the Linux kernel's io_uring subsystem allowed disabled rings to bypass task restrictions on register operations until enabled. This could let a task with restricted register opcodes create a disabled ring, perform any register opcode on it, and then enable the ring without proper permission. The issue has been fixed by ensuring that rings inheriting restrictions from tasks are checked even while disabled, requiring explicit permission to enable them.

A vulnerability in the Linux kernel's drm/vc4 driver was fixed by properly draining the hangcheck timer and related work on V3D unbind. The flaw allowed timer callbacks to access freed memory due to the timer not being stopped before the device was unbound and freed.

A vulnerability in the Linux kernel Bluetooth driver btintel_pcie was fixed to correct a bounds check error in the TX descriptor handling. The function btintel_pcie_prepare_tx used an index that could exceed the valid range of the transmit queue arrays, potentially leading to out-of-bounds access. This issue was addressed by rejecting an index equal to the transmit queue count, which is one past the end of the arrays.

A Linux kernel vulnerability was fixed that prevented scheduling deferred kernel page table freeing during system boot. The issue caused kernel panics when using a boot-time function tracer with a filter, due to workqueue usage before initialization. The fix delays scheduling the freeing work until the system is fully booted.

In the Linux kernel, the following vulnerability has been resolved: riscv: patch: fix handling of bpf-jit execmem addresses Commit 8718e5a3090b ("riscv: patch: skip fixmap mapping when kernel text is already writable") gated the core_kernel_text() branch of patch_map() on CONFIG_STRICT_KERNEL_RWX, and explicitly left the vmalloc branch unchanged. That branch has a separate problem. That branch only creates a temporary writable fixmap alias when CONFIG_STRICT_MODULE_RWX is enabled, and otherwise assumes the target is directly writable and returns the address unchanged. That assumption no longer holds: bpf_prog_pack_alloc calls set_memory_rox() on every pack unconditionally in alloc_new_pack(), independently of any CONFIG_STRICT_*_RWX option, so BPF text in the vmalloc area is read-only regardless of what CONFIG_STRICT_MODULE_RWX says. With CONFIG_STRICT_MODULE_RWX=n, patch_map() returns the read-only address directly, the subsequent copy_to_kernel_nofault() takes a page fault and returns -EFAULT. bpf_arch_text_copy() turns that into -EINVAL, which propagates through bpf_jit_binary_pack_finalize() to the WARN_ON() in bpf_int_jit_compile() and leaves the program un-JITed. Note that BPF cannot be fixed the way kprobes was in commit bdc46e507b59 ("riscv: mm: make EXECMEM_KPROBES writable without CONFIG_STRICT_MODULE_RWX"). EXECMEM_BPF is already PAGE_KERNEL, i.e. writable at allocation time; the read-only mapping is established afterwards by generic code in alloc_new_pack(), which arch code cannot influence. The only place this can be handled is patch_map(). This is the same problem that was fixed on arm64 by commit b1480ed230ac ("arm64: patching: fix handling of execmem addresses"), and the fix is the same: CONFIG_EXECMEM is what actually tracks whether the vmalloc area can hold executable memory that needs a temporary alias to be written. CONFIG_BPF_JIT, CONFIG_KPROBES and CONFIG_MODULES all select it. Note that this is not limited to CONFIG_MODULES=n. Unlike arm64, riscv selects CONFIG_ARCH_OPTIONAL_KERNEL_RWX, so CONFIG_STRICT_MODULE_RWX can be disabled with CONFIG_MODULES=y as well, and the bug is reachable in that configuration too. The !CONFIG_MMU build is unaffected: it has its own __patch_insn_set() and __patch_insn_write() implementations and never calls patch_map().

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix status of pending commands flushed on power off cmd_complete_rsp() receives a struct cmd_lookup and, for a pending command that has no cmd_complete callback, falls through to cmd_status_rsp(cmd, data). cmd_status_rsp() reads data as a u8 *, so the status sent comes from the first byte of match->sk's representation, not from match->mgmt_status. commit f53e1c9c726d ("Bluetooth: MGMT: Fix possible crash on mgmt_index_removed") changed the callers' data from &status to &match and updated the cmd_complete branch to match->mgmt_status, but left the fall-through passing data unchanged. In mgmt_index_removed() match->sk is NULL, so every such command is answered with status 0x00 (Success) instead of MGMT_STATUS_INVALID_INDEX. In __mgmt_power_off() it is NULL too, unless a Set Powered command was pending: then settings_rsp() has stored that command's socket in match->sk, and the byte sent comes from the socket pointer. Either way the status the caller set, MGMT_STATUS_NOT_POWERED (or MGMT_STATUS_INVALID_INDEX when the device is being unregistered), is lost. Pass the status the callers set. This was seen on a QCA9377 laptop: bluetoothd's Start Discovery, pending when the adapter was powered off, was answered with Command Status 0x00 and no parameters, and bluetoothd 5.72 crashed on the zero-length success. BlueZ master has since added the length check on that path ("adapter: Fix crash on short start discovery reply", BlueZ a734b06059cb), but userspace should still be told Not Powered, not Success. Tested on Ubuntu 7.0.0-31 with a virtual controller (hci_vhci): power off is held in HCI Write Scan Enable while a Start Discovery is submitted, and the flush answers it with status 0x00 before this change and 0x0f (Not Powered) after.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: serialize vblank counter reads against GPU reset The vblank counter callback reads display registers and scanout position without holding reset_domain->sem. During GPU recovery, display commit work can call the callback while reset owns the semaphore for writing. The hardware access then triggers the lockdep_assert_held() in amdgpu_device_skip_hw_access() and sets TAINT_WARN when lockdep is enabled. Try to acquire the reset semaphore for reading before accessing the hardware, and hold it across the counter and scanout-position reads. If reset is already in progress, return DRM's cached software vblank count instead. This avoids blocking behind reset and avoids accessing display hardware while it is being reset. The cached count is less accurate than the hardware count, but is used only when reset prevents a safe hardware read. This addresses the reset-time warning from this vblank path; it does not suppress or fix unrelated lockdep warnings. (cherry picked from commit 51a4359f7431a4be5e42803c8bdaf7e0e5be2934)

In the Linux kernel, the following vulnerability has been resolved: ASoC: samsung: i2s: enable op_clk in probe to balance runtime PM The probe function puts the device into the runtime PM active state with only the "iis" bus clock enabled, but it also sets priv->op_clk to the parent of the RCLK_SRC mux without enabling it. The runtime PM suspend callback disables both clocks, so the first runtime suspend after probe disables op_clk once more than it was enabled. On Exynos5250 Arndale both clocks resolve to the same EXYNOS_I2S_BUS gate, so this triggers the following warning during boot: WARNING: drivers/clk/clk.c:1270 at clk_core_disable+0xe4/0x23c, CPU#0: kworker/u8:3/45 i2s_bus already disabled ... Workqueue: pm pm_runtime_work Call trace: ... clk_core_disable from clk_disable+0x28/0x34 clk_disable from i2s_runtime_suspend+0x58/0x68 [snd_soc_i2s] i2s_runtime_suspend [snd_soc_i2s] from genpd_runtime_suspend+0xc4/0x298 genpd_runtime_suspend from __rpm_callback+0x48/0x18c __rpm_callback from rpm_callback+0x4c/0x50 rpm_callback from rpm_suspend+0xf4/0x718 rpm_suspend from pm_runtime_work+0x9c/0xa0 ... Fix this by enabling op_clk in probe right after getting it, so the clock state matches the runtime PM active state, and by disabling it in remove.

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: validate transport header presence in set_ipv6_addr When executing IPv6 address rewrite actions on IPv6 fragments, set_ipv6_addr() calls update_ipv6_checksum(). If parse_ipv6hdr() processes a non-first IPv6 fragment, it sets key->ip.proto to NEXTHDR_FRAGMENT and returns early without calling skb_set_transport_header(). update_ipv6_checksum() unconditionally evaluates skb_transport_offset() on entry before checking l4_proto. Because skb->transport_header is uninitialized, this triggers a warning under CONFIG_DEBUG_NET=y although it is completely harmless. Fix this by returning early in update_ipv6_checksum() if l4_proto is NEXTHDR_FRAGMENT. This avoids reading the uninitialized transport offset for fragments while preserving the debug warning for any other protocol where the transport header is unexpectedly missing. See the syzbot trace: !skb_transport_header_was_set(skb) WARNING: ./include/linux/skbuff.h:3075 at skb_transport_header include/linux/skbuff.h:3075 [inline], CPU#1: syz-executor463/5635 WARNING: ./include/linux/skbuff.h:3075 at skb_transport_offset include/linux/skbuff.h:3250 [inline], CPU#1: syz-executor463/5635 WARNING: ./include/linux/skbuff.h:3075 at update_ipv6_checksum net/openvswitch/actions.c:361 [inline], CPU#1: syz-executor463/5635 WARNING: ./include/linux/skbuff.h:3075 at set_ipv6_addr+0x462/0x660 net/openvswitch/actions.c:399, CPU#1: syz-executor463/5635 [...] RIP: 0010:skb_transport_header include/linux/skbuff.h:3075 [inline] RIP: 0010:skb_transport_offset include/linux/skbuff.h:3250 [inline] RIP: 0010:update_ipv6_checksum net/openvswitch/actions.c:361 [inline] RIP: 0010:set_ipv6_addr+0x462/0x660 net/openvswitch/actions.c:399 [...] Call Trace: <TASK> set_ipv6 net/openvswitch/actions.c:531 [inline] do_execute_actions+0x557e/0x8600 net/openvswitch/actions.c:1366 ovs_execute_actions+0xde/0x520 net/openvswitch/actions.c:1592 ovs_packet_cmd_execute+0xb4f/0xf10 net/openvswitch/datapath.c:705 genl_family_rcv_msg_doit+0x233/0x340 net/netlink/genetlink.c:1114 genl_rcv_msg+0x614/0x7a0 net/netlink/genetlink.c:1209 netlink_rcv_skb+0x226/0x4a0 net/netlink/af_netlink.c:2572 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1218 netlink_unicast+0x7bd/0x940 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1916 sock_sendmsg_nosec+0x14e/0x190 net/socket.c:800

CVE-2026-90885 is an XML External Entity (XXE) vulnerability in the Apache Camel Saxon component affecting versions from 4.0.0 before 4.18.5 and from 4.19.0 before 4.22.2. The vulnerability arises because the default Saxon Configuration used by XQueryBuilder accepts DOCTYPE declarations and resolves external entities when the message body is already a javax.xml.transform.Source, allowing external entity expansion. This can lead to unauthorized file reads and network requests initiated by the vulnerable process. The issue is fixed in Apache Camel versions 4.18.5 and 4.22.2.

The boneIO Black web interface lacks proper clickjacking protections. A remote attacker can embed the control panel in an iframe on a malicious web page and trick an authenticated user on the internal network into clicking buttons that activate relays, open gates, or control blinds. This can lead to unauthorized state changes with potential physical safety consequences. Critically, due to CVE-2026-77053 (authentication disabled by default), any user on the same internal network can trigger attacker-controlled actions by visiting the malicious website. This issue was fixed in version 1.6.0.

Use of Cache Containing Sensitive Information vulnerability in Apache Camel Oauth component. This issue affects Apache Camel: from 4.19.0 before 4.22.2. OAuthClientCredentialsTokenResolver obtains OAuth 2.0 bearer tokens through the client credentials grant on behalf of the components that authenticate their outbound calls with a named OAuth profile, such as camel-openai, camel-langchain4j-agent, camel-huggingface, camel-docling, camel-a2a, camel-spring-ai-chat and the IBM watsonx components, and of applications that call the OAuthClientAuthenticationFactory SPI directly. It kept the tokens it obtained in a static cache shared by every resolver instance and every CamelContext in the JVM, and keyed that cache on the token endpoint and the client ID only, although the token request also carries the client secret and the requested scope. Two profiles that share a token endpoint and a client ID but request different scopes, or authenticate with different client secrets, therefore mapped to the same cache entry: the profile that resolved a token first populated the entry, and the other profile was then handed that token, with no token request made under its own configuration, for as long as the token remained valid. Token caching is enabled by default, and pointing several profiles at one identity provider client is an ordinary use of the profile support rather than an opt-in to an insecure setting. The outcome is an outbound request that carries a token issued for another profile's scope, which can grant broader authority than the calling profile was configured for, or reach a service the token was not issued for; with identity providers that derive a token's audience from the requested scope, a different scope can mean a token for a different service altogether. A profile configured with a different client secret was likewise served the token obtained with the other secret, without authenticating with its own. The profiles are configured by the deployment, which is trusted, so no untrusted input reaches the cache: the party that gains is the service that receives a token it was not meant to receive, which, if hostile or compromised, can replay that token within its scope. Reaching the issue requires a deployment that defines more than one profile sharing a token endpoint and client ID while differing in scope or client secret. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. The 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, disable token caching on every OAuth profile that shares a token endpoint and client ID with another profile, by setting camel.oauth.NAME.cache-tokens=false for a named profile or camel.oauth.cache-tokens=false for the default one, so that each resolution requests a token with that profile’s own scope and client secret, at the cost of a token request on every resolution. Alternatively, register a separate client at the identity provider for each profile that needs a different scope or client secret, so that no two such profiles share a client ID.

boneIO Black directly excludes several API endpoints from the authentication. An unauthenticated remote attacker on the local network can retrieve system logs, firmware version, serial number, MQTT username, configuration file listings, and API documentation. This data aids reconnaissance and enables targeted attacks against the device. This issue was fixed in version 1.6.0: every API route requires an authenticated role, the interactive API documentation is disabled, and the serial number is withheld from anonymous callers.

boneIO black_debian_images stores the Mosquitto MQTT broker password file at /etc/mosquitto/passwd with world-readable permissions. Any local user can read the password hashes for all MQTT accounts and perform offline dictionary attacks. This issue was fixed in version 1.6.0.