Search: bunch.ca
4 threats
Most recently published first
| Severity | CVSS | Signals | Threat | Source | Published | Score and star |
|---|---|---|---|---|---|---|
| Medium | 5.5 | EPSS 0.1% | Medium5.5EPSS 0.1%GCVE DatabaseCVE-2026-53142 In the Linux kernel, the following vulnerability has been resolved: drm/xe/display: fix oops in suspend/shutdown without display The xe driver keeps track of whether to probe display, and whether display hardware is there, using xe->info.probe_display. It gets set to false if there's no display after intel_display_device_probe(). However, the display may also be disabled via fuses, detected at a later time in intel_display_device_info_runtime_init(). In this case, the xe driver does for_each_intel_crtc() on uninitialized mode config in xe_display_flush_cleanup_work(), leading to a NULL pointer dereference, and generally calls display code with display info cleared. Check for intel_display_device_present() after intel_display_device_info_runtime_init(), and reset xe->info.probe_display as necessary. Also do unset_display_features() for completeness, although display runtime init has already done that. This will need to be unified across all cases later. Move intel_display_device_info_runtime_init() call slightly earlier, similar to i915, to avoid a bunch of unnecessary setup for no display cases. Note #1: The xe driver has no business doing low level display plumbing like for_each_intel_crtc() to begin with. It all needs to happen in display code. Note #2: The actual bug is present already in commit 44e694958b95 ("drm/xe/display: Implement display support"), but the oops was likely introduced later at commit ddf6492e0e50 ("drm/xe/display: Make display suspend/resume work on discrete"). (cherry picked from commit 7c3eb9f47533220888a67266448185fd0775d4da) | GCVE Database | ||
| High | 7.8 | EPSS 0.2% | High7.8EPSS 0.2%CVE Database V5CVE-2026-43408 CVE-2026-43408 is a high-severity vulnerability in the Linux kernel's Ceph filesystem code where missing initializers for ceph_path_info structures can cause kernel crashes. The issue arises because ceph_mdsc_build_path() must be called with a zero-initialized ceph_path_info parameter; failure to do so can lead to crashes when ceph_mdsc_free_path_info() is called. This bug affects multiple Linux kernel versions prior to 6.12.78, 6.7, and 6.17 where the fix has been applied. The vulnerability could potentially be exploited to elevate privileges, although no known exploits are reported in the wild. The fix involves adding missing initializers to ensure safe handling of ceph_path_info structures. | CVE Database V5 | ||
| Medium | 6.7 | EPSS 0.2% | Medium6.7EPSS 0.2%GCVE DatabaseCVE-2025-40102 In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Prevent access to vCPU events before init Another day, another syzkaller bug. KVM erroneously allows userspace to pend vCPU events for a vCPU that hasn't been initialized yet, leading to KVM interpreting a bunch of uninitialized garbage for routing / injecting the exception. In one case the injection code and the hyp disagree on whether the vCPU has a 32bit EL1 and put the vCPU into an illegal mode for AArch64, tripping the BUG() in exception_target_el() during the next injection: kernel BUG at arch/arm64/kvm/inject_fault.c:40! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 3 UID: 0 PID: 318 Comm: repro Not tainted 6.17.0-rc4-00104-g10fd0285305d #6 PREEMPT Hardware name: linux,dummy-virt (DT) pstate: 21402009 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : exception_target_el+0x88/0x8c lr : pend_serror_exception+0x18/0x13c sp : ffff800082f03a10 x29: ffff800082f03a10 x28: ffff0000cb132280 x27: 0000000000000000 x26: 0000000000000000 x25: ffff0000c2a99c20 x24: 0000000000000000 x23: 0000000000008000 x22: 0000000000000002 x21: 0000000000000004 x20: 0000000000008000 x19: ffff0000c2a99c20 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 00000000200000c0 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff800082f03af8 x7 : 0000000000000000 x6 : 0000000000000000 x5 : ffff800080f621f0 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 000000000040009b x1 : 0000000000000003 x0 : ffff0000c2a99c20 Call trace: exception_target_el+0x88/0x8c (P) kvm_inject_serror_esr+0x40/0x3b4 __kvm_arm_vcpu_set_events+0xf0/0x100 kvm_arch_vcpu_ioctl+0x180/0x9d4 kvm_vcpu_ioctl+0x60c/0x9f4 __arm64_sys_ioctl+0xac/0x104 invoke_syscall+0x48/0x110 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xf0 el0t_64_sync_handler+0xa0/0xe4 el0t_64_sync+0x198/0x19c Code: f946bc01 b4fffe61 9101e020 17fffff2 (d4210000) Reject the ioctls outright as no sane VMM would call these before KVM_ARM_VCPU_INIT anyway. Even if it did the exception would've been thrown away by the eventual reset of the vCPU's state. EPSS 0.2%Vulnerability | GCVE Database | ||
| High | 7.8 | EPSS 0.2% | High7.8EPSS 0.2%GCVE DatabaseCVE-2025-21899 In the Linux kernel, the following vulnerability has been resolved: tracing: Fix bad hist from corrupting named_triggers list The following commands causes a crash: ~# cd /sys/kernel/tracing/events/rcu/rcu_callback ~# echo 'hist:name=bad:keys=common_pid:onmax(bogus).save(common_pid)' > trigger bash: echo: write error: Invalid argument ~# echo 'hist:name=bad:keys=common_pid' > trigger Because the following occurs: event_trigger_write() { trigger_process_regex() { event_hist_trigger_parse() { data = event_trigger_alloc(..); event_trigger_register(.., data) { cmd_ops->reg(.., data, ..) [hist_register_trigger()] { data->ops->init() [event_hist_trigger_init()] { save_named_trigger(name, data) { list_add(&data->named_list, &named_triggers); } } } } ret = create_actions(); (return -EINVAL) if (ret) goto out_unreg; [..] ret = hist_trigger_enable(data, ...) { list_add_tail_rcu(&data->list, &file->triggers); <<<---- SKIPPED!!! (this is important!) [..] out_unreg: event_hist_unregister(.., data) { cmd_ops->unreg(.., data, ..) [hist_unregister_trigger()] { list_for_each_entry(iter, &file->triggers, list) { if (!hist_trigger_match(data, iter, named_data, false)) <- never matches continue; [..] test = iter; } if (test && test->ops->free) <<<-- test is NULL test->ops->free(test) [event_hist_trigger_free()] { [..] if (data->name) del_named_trigger(data) { list_del(&data->named_list); <<<<-- NEVER gets removed! } } } } [..] kfree(data); <<<-- frees item but it is still on list The next time a hist with name is registered, it causes an u-a-f bug and the kernel can crash. Move the code around such that if event_trigger_register() succeeds, the next thing called is hist_trigger_enable() which adds it to the list. A bunch of actions is called if get_named_trigger_data() returns false. But that doesn't need to be called after event_trigger_register(), so it can be moved up, allowing event_trigger_register() to be called just before hist_trigger_enable() keeping them together and allowing the file->triggers to be properly populated. EPSS 0.2%Vulnerability | GCVE Database |
Page 1 of 1 · 2 duplicate CVE records merged